In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix move_normal_pmd/retract_page_tables race In mremap(), move_page_tables() looks at the type of the PMD entry and the specified address range to figure out by which method the next chunk of page table entries should be moved. At that point, the mmap_lock is held in write mode, but no rmap locks are held yet. For PMD entries that point to page tables and are fully covered by the source address range, move_pgt_entry(NORMAL_PMD, ...) is called, which first takes rmap locks, then does move_normal_pmd(). move_normal_pmd() takes the necessary page table locks at source and destination, then moves an entire page table from the source to the destination. The problem is: The rmap locks, which protect against concurrent page table removal by retract_page_tables() in the THP code, are only taken after the PMD entry has been read and it has been decided how to move it. So we can race as follows (with two processes that have mappings of the same tmpfs file that is stored on a tmpfs mount with huge=advise); note that process A accesses page tables through the MM while process B does it through the file rmap: process A process B ========= ========= mremap mremap_to move_vma move_page_tables get_old_pmd alloc_new_pmd *** PREEMPT *** madvise(MADV_COLLAPSE) do_madvise madvise_walk_vmas madvise_vma_behavior madvise_collapse hpage_collapse_scan_file collapse_file retract_page_tables i_mmap_lock_read(mapping) pmdp_collapse_flush i_mmap_unlock_read(mapping) move_pgt_entry(NORMAL_PMD, ...) take_rmap_locks move_normal_pmd drop_rmap_locks When this happens, move_normal_pmd() can end up creating bogus PMD entries in the line `pmd_populate(mm, new_pmd, pmd_pgtable(pmd))`. The effect depends on arch-specific and machine-specific details; on x86, you can end up with physical page 0 mapped as a page table, which is likely exploitable for user->kernel privilege escalation. Fix the race by letting process B recheck that the PMD still points to a page table after the rmap locks have been taken. Otherwise, we bail and let the caller fall back to the PTE-level copying path, which will then bail immediately at the pmd_none() check. Bug reachability: Reaching this bug requires that you can create shmem/file THP mappings - anonymous THP uses different code that doesn't zap stuff under rmap locks. File THP is gated on an experimental config flag (CONFIG_READ_ONLY_THP_FOR_FS), so on normal distro kernels you need shmem THP to hit this bug. As far as I know, getting shmem THP normally requires that you can mount your own tmpfs with the right mount flags, which would require creating your own user+mount namespace; though I don't know if some distros maybe enable shmem THP by default or something like that. Bug impact: This issue can likely be used for user->kernel privilege escalation when it is reachable.

In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition In the svc_i3c_master_probe function, &master->hj_work is bound with svc_i3c_master_hj_work, &master->ibi_work is bound with svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the hj_work, svc_i3c_master_irq_handler can start the ibi_work. If we remove the module which will call svc_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | svc_i3c_master_hj_work svc_i3c_master_remove | i3c_master_unregister(&master->base)| device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in svc_i3c_master_remove.

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF of ref->proc caused by race condition A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the reference for a node. In this case, the target proc normally releases the failed reference upon close as expected. However, if the target is dying in parallel the call will race with binder_deferred_release(), so the target could have released all of its references by now leaving the cleanup of the new failed reference unhandled. The transaction then ends and the target proc gets released making the ref->proc now a dangling pointer. Later on, ref->node is closed and we attempt to take spin_lock(&ref->proc->inner_lock), which leads to the use-after-free bug reported below. Let's fix this by cleaning up the failed reference on the spot instead of relying on the target to do so. ================================================================== BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150 Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590 CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: dump_backtrace.part.0+0x1d0/0x1e0 show_stack+0x18/0x70 dump_stack_lvl+0x68/0x84 print_report+0x2e4/0x61c kasan_report+0xa4/0x110 kasan_check_range+0xfc/0x1a4 __kasan_check_write+0x3c/0x50 _raw_spin_lock+0xa8/0x150 binder_deferred_func+0x5e0/0x9b0 process_one_work+0x38c/0x5f0 worker_thread+0x9c/0x694 kthread+0x188/0x190 ret_from_fork+0x10/0x20

The LiveUpdate capability (liveupdate.sh) in Symantec AntiVirus Scan Engine 4.0 and 4.3 for Red Hat Linux allows local users to create or append to arbitrary files via a symlink attack on /tmp/LiveUpdate.log.

Firejail before 0.9.64.4 allows attackers to bypass intended access restrictions because there is a TOCTOU race condition between a stat operation and an OverlayFS mount operation.

The Linux Kernel versions 2.6.38 through 4.14 have a problematic use of pmd_mkdirty() in the touch_pmd() function inside the THP implementation. touch_pmd() can be reached by get_user_pages(). In such case, the pmd will become dirty. This scenario breaks the new can_follow_write_pmd()'s logic - pmd can become dirty without going through a COW cycle. This bug is not as severe as the original "Dirty cow" because an ext4 file (or any other regular file) cannot be mapped using THP. Nevertheless, it does allow us to overwrite read-only huge pages. For example, the zero huge page and sealed shmem files can be overwritten (since their mapping can be populated using THP). Note that after the first write page-fault to the zero page, it will be replaced with a new fresh (and zeroed) thp.

Linux kernel: Exploitable memory corruption due to UFO to non-UFO path switch. When building a UFO packet with MSG_MORE __ip_append_data() calls ip_ufo_append_data() to append. However in between two send() calls, the append path can be switched from UFO to non-UFO one, which leads to a memory corruption. In case UFO packet lengths exceeds MTU, copy = maxfraglen - skb->len becomes negative on the non-UFO path and the branch to allocate new skb is taken. This triggers fragmentation and computation of fraggap = skb_prev->len - maxfraglen. Fraggap can exceed MTU, causing copy = datalen - transhdrlen - fraggap to become negative. Subsequently skb_copy_and_csum_bits() writes out-of-bounds. A similar issue is present in IPv6 code. The bug was introduced in e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") on Oct 18 2005.

libffi requests an executable stack allowing attackers to more easily trigger arbitrary code execution by overwriting the stack. Please note that libffi is used by a number of other libraries. It was previously stated that this affects libffi version 3.2.1 but this appears to be incorrect. libffi prior to version 3.1 on 32 bit x86 systems was vulnerable, and upstream is believed to have fixed this issue in version 3.1.

In the Linux kernel, the following vulnerability has been resolved: net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove.

A local privilege escalation was discovered in the Linux kernel before 5.10.13. Multiple race conditions in the AF_VSOCK implementation are caused by wrong locking in net/vmw_vsock/af_vsock.c. The race conditions were implicitly introduced in the commits that added VSOCK multi-transport support.

The fix for CVE-2020-9484 was incomplete. When using Apache Tomcat 10.0.0-M1 to 10.0.0, 9.0.0.M1 to 9.0.41, 8.5.0 to 8.5.61 or 7.0.0. to 7.0.107 with a configuration edge case that was highly unlikely to be used, the Tomcat instance was still vulnerable to CVE-2020-9494. Note that both the previously published prerequisites for CVE-2020-9484 and the previously published mitigations for CVE-2020-9484 also apply to this issue.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf.

Redis is an open source, in-memory database that persists on disk. An authenticated user may use a specially crafted Lua script to manipulate the garbage collector and potentially lead to remote code execution. The problem is fixed in 7.4.2, 7.2.7, and 6.2.17. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands.

kernel/events/core.c in the performance subsystem in the Linux kernel before 4.0 mismanages locks during certain migrations, which allows local users to gain privileges via a crafted application, aka Android internal bug 30955111.

The __oom_reap_task_mm function in mm/oom_kill.c in the Linux kernel before 4.14.4 mishandles gather operations, which allows attackers to cause a denial of service (TLB entry leak or use-after-free) or possibly have unspecified other impact by triggering a copy_to_user call within a certain time window.

In the Linux kernel, the following vulnerability has been resolved: exec: Fix ToCToU between perm check and set-uid/gid usage When opening a file for exec via do_filp_open(), permission checking is done against the file's metadata at that moment, and on success, a file pointer is passed back. Much later in the execve() code path, the file metadata (specifically mode, uid, and gid) is used to determine if/how to set the uid and gid. However, those values may have changed since the permissions check, meaning the execution may gain unintended privileges. For example, if a file could change permissions from executable and not set-id: ---------x 1 root root 16048 Aug 7 13:16 target to set-id and non-executable: ---S------ 1 root root 16048 Aug 7 13:16 target it is possible to gain root privileges when execution should have been disallowed. While this race condition is rare in real-world scenarios, it has been observed (and proven exploitable) when package managers are updating the setuid bits of installed programs. Such files start with being world-executable but then are adjusted to be group-exec with a set-uid bit. For example, "chmod o-x,u+s target" makes "target" executable only by uid "root" and gid "cdrom", while also becoming setuid-root: -rwxr-xr-x 1 root cdrom 16048 Aug 7 13:16 target becomes: -rwsr-xr-- 1 root cdrom 16048 Aug 7 13:16 target But racing the chmod means users without group "cdrom" membership can get the permission to execute "target" just before the chmod, and when the chmod finishes, the exec reaches brpm_fill_uid(), and performs the setuid to root, violating the expressed authorization of "only cdrom group members can setuid to root". Re-check that we still have execute permissions in case the metadata has changed. It would be better to keep a copy from the perm-check time, but until we can do that refactoring, the least-bad option is to do a full inode_permission() call (under inode lock). It is understood that this is safe against dead-locks, but hardly optimal.

In systemd before v242-rc4, it was discovered that pam_systemd does not properly sanitize the environment before using the XDG_SEAT variable. It is possible for an attacker, in some particular configurations, to set a XDG_SEAT environment variable which allows for commands to be checked against polkit policies using the "allow_active" element rather than "allow_any".

The BPF subsystem in the Linux kernel before 4.5.5 mishandles reference counts, which allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via a crafted application on (1) a system with more than 32 Gb of memory, related to the program reference count or (2) a 1 Tb system, related to the map reference count.

Race condition in mm/gup.c in the Linux kernel 2.x through 4.x before 4.8.3 allows local users to gain privileges by leveraging incorrect handling of a copy-on-write (COW) feature to write to a read-only memory mapping, as exploited in the wild in October 2016, aka "Dirty COW."

The init_new_context function in arch/x86/include/asm/mmu_context.h in the Linux kernel before 4.12.10 does not correctly handle errors from LDT table allocation when forking a new process, allowing a local attacker to achieve a use-after-free or possibly have unspecified other impact by running a specially crafted program. This vulnerability only affected kernels built with CONFIG_MODIFY_LDT_SYSCALL=y.

In the Linux kernel, the following vulnerability has been resolved: gve: Account for stopped queues when reading NIC stats We now account for the fact that the NIC might send us stats for a subset of queues. Without this change, gve_get_ethtool_stats might make an invalid access on the priv->stats_report->stats array.

A double free bug in packet_set_ring() in net/packet/af_packet.c can be exploited by a local user through crafted syscalls to escalate privileges or deny service. We recommend upgrading kernel past the effected versions or rebuilding past ec6af094ea28f0f2dda1a6a33b14cd57e36a9755

A race condition in Linux kernel SCTP sockets (net/sctp/socket.c) before 5.12-rc8 can lead to kernel privilege escalation from the context of a network service or an unprivileged process. If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock then an element is removed from the auto_asconf_splist list without any proper locking. This can be exploited by an attacker with network service privileges to escalate to root or from the context of an unprivileged user directly if a BPF_CGROUP_INET_SOCK_CREATE is attached which denies creation of some SCTP socket.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_withdraw_cookie() We got the following issue in our fault injection stress test: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600 Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109 CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566 Call Trace: <TASK> kasan_report+0x93/0xc0 cachefiles_withdraw_cookie+0x4d9/0x600 fscache_cookie_state_machine+0x5c8/0x1230 fscache_cookie_worker+0x91/0x1c0 process_one_work+0x7fa/0x1800 [...] Allocated by task 117: kmalloc_trace+0x1b3/0x3c0 cachefiles_acquire_volume+0xf3/0x9c0 fscache_create_volume_work+0x97/0x150 process_one_work+0x7fa/0x1800 [...] Freed by task 120301: kfree+0xf1/0x2c0 cachefiles_withdraw_cache+0x3fa/0x920 cachefiles_put_unbind_pincount+0x1f6/0x250 cachefiles_daemon_release+0x13b/0x290 __fput+0x204/0xa00 task_work_run+0x139/0x230 do_exit+0x87a/0x29b0 [...] ================================================================== Following is the process that triggers the issue: p1 | p2 ------------------------------------------------------------ fscache_begin_lookup fscache_begin_volume_access fscache_cache_is_live(fscache_cache) cachefiles_daemon_release cachefiles_put_unbind_pincount cachefiles_daemon_unbind cachefiles_withdraw_cache fscache_withdraw_cache fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN); cachefiles_withdraw_objects(cache) fscache_wait_for_objects(fscache) atomic_read(&fscache_cache->object_count) == 0 fscache_perform_lookup cachefiles_lookup_cookie cachefiles_alloc_object refcount_set(&object->ref, 1); object->volume = volume fscache_count_object(vcookie->cache); atomic_inc(&fscache_cache->object_count) cachefiles_withdraw_volumes cachefiles_withdraw_volume fscache_withdraw_volume __cachefiles_free_volume kfree(cachefiles_volume) fscache_cookie_state_machine cachefiles_withdraw_cookie cache = object->volume->cache; // cachefiles_volume UAF !!! After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups to complete first, and then wait for fscache_cache->object_count == 0 to avoid the cookie exiting after the volume has been freed and triggering the above issue. Therefore call fscache_withdraw_volume() before calling cachefiles_withdraw_objects(). This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two cases will occur: 1) fscache_begin_lookup fails in fscache_begin_volume_access(). 2) fscache_withdraw_volume() will ensure that fscache_count_object() has been executed before calling fscache_wait_for_objects().

ImageMagick is a free and open-source software suite, used for editing and manipulating digital images. The `AppImage` version `ImageMagick` might use an empty path when setting `MAGICK_CONFIGURE_PATH` and `LD_LIBRARY_PATH` environment variables while executing, which might lead to arbitrary code execution by loading malicious configuration files or shared libraries in the current working directory while executing `ImageMagick`. The vulnerability is fixed in 7.11-36.

An insecure modification vulnerability in the /etc/passwd file was found in the container openshift/apb-base, affecting versions before the following 4.3.5, 4.2.21, 4.1.37, and 3.11.188-4. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

An insecure modification vulnerability in the /etc/passwd file was found in the openshift/ocp-release-operator-sdk. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges. This CVE is specific to the openshift/ansible-operator-container as shipped in Openshift 4.

Race condition in the find_keyring_by_name function in security/keys/keyring.c in the Linux kernel 2.6.34-rc5 and earlier allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact via keyctl session commands that trigger access to a dead keyring that is undergoing deletion by the key_cleanup function.

An issue was discovered in Xen through 4.11.x allowing x86 PV guest OS users to cause a denial of service or gain privileges by leveraging a race condition that arose when XENMEM_exchange was introduced.

In the Linux kernel, the following vulnerability has been resolved: filelock: fix potential use-after-free in posix_lock_inode Light Hsieh reported a KASAN UAF warning in trace_posix_lock_inode(). The request pointer had been changed earlier to point to a lock entry that was added to the inode's list. However, before the tracepoint could fire, another task raced in and freed that lock. Fix this by moving the tracepoint inside the spinlock, which should ensure that this doesn't happen.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown() will return 1 when pm runtime state is active, and we don't want to get the warning message in this case. So we change the return value < 0 for WARN_ON().

In the Linux kernel, the following vulnerability has been resolved: drm/drm_file: Fix pid refcounting race <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de> filp->pid is supposed to be a refcounted pointer; however, before this patch, drm_file_update_pid() only increments the refcount of a struct pid after storing a pointer to it in filp->pid and dropping the dev->filelist_mutex, making the following race possible: process A process B ========= ========= begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid B>, 1) mutex_unlock(&dev->filelist_mutex) begin drm_file_update_pid mutex_lock(&dev->filelist_mutex) rcu_replace_pointer(filp->pid, <pid A>, 1) mutex_unlock(&dev->filelist_mutex) get_pid(<pid A>) synchronize_rcu() put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here *** get_pid(<pid B>) *** UAF *** synchronize_rcu() put_pid(<pid A>) As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y because it requires RCU to detect a quiescent state in code that is not explicitly calling into the scheduler. This race leads to use-after-free of a "struct pid". It is probably somewhat hard to hit because process A has to pass through a synchronize_rcu() operation while process B is between mutex_unlock() and get_pid(). Fix it by ensuring that by the time a pointer to the current task's pid is stored in the file, an extra reference to the pid has been taken. This fix also removes the condition for synchronize_rcu(); I think that optimization is unnecessary complexity, since in that case we would usually have bailed out on the lockless check above.

In the Linux kernel, the following vulnerability has been resolved: kunit: Fix kthread reference There is a race condition when a kthread finishes after the deadline and before the call to kthread_stop(), which may lead to use after free.

Multiple race conditions in fs/pipe.c in the Linux kernel before 2.6.32-rc6 allow local users to cause a denial of service (NULL pointer dereference and system crash) or gain privileges by attempting to open an anonymous pipe via a /proc/*/fd/ pathname.

The sg implementation in the Linux kernel through 4.9 does not properly restrict write operations in situations where the KERNEL_DS option is set, which allows local users to read or write to arbitrary kernel memory locations or cause a denial of service (use-after-free) by leveraging access to a /dev/sg device, related to block/bsg.c and drivers/scsi/sg.c. NOTE: this vulnerability exists because of an incomplete fix for CVE-2016-9576.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain.

Race condition in the L2TPv3 IP Encapsulation feature in the Linux kernel before 4.8.14 allows local users to gain privileges or cause a denial of service (use-after-free) by making multiple bind system calls without properly ascertaining whether a socket has the SOCK_ZAPPED status, related to net/l2tp/l2tp_ip.c and net/l2tp/l2tp_ip6.c.

The fix for CVE-2019-11599, affecting the Linux kernel before 5.0.10 was not complete. A local user could use this flaw to obtain sensitive information, cause a denial of service, or possibly have other unspecified impacts by triggering a race condition with mmget_not_zero or get_task_mm calls.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race setting file private on concurrent lseek using same fd When doing concurrent lseek(2) system calls against the same file descriptor, using multiple threads belonging to the same process, we have a short time window where a race happens and can result in a memory leak. The race happens like this: 1) A program opens a file descriptor for a file and then spawns two threads (with the pthreads library for example), lets call them task A and task B; 2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at file.c:find_desired_extent() while holding a read lock on the inode; 3) At the start of find_desired_extent(), it extracts the file's private_data pointer into a local variable named 'private', which has a value of NULL; 4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode in shared mode and enters file.c:find_desired_extent(), where it also extracts file->private_data into its local variable 'private', which has a NULL value; 5) Because it saw a NULL file private, task A allocates a private structure and assigns to the file structure; 6) Task B also saw a NULL file private so it also allocates its own file private and then assigns it to the same file structure, since both tasks are using the same file descriptor. At this point we leak the private structure allocated by task A. Besides the memory leak, there's also the detail that both tasks end up using the same cached state record in the private structure (struct btrfs_file_private::llseek_cached_state), which can result in a use-after-free problem since one task can free it while the other is still using it (only one task took a reference count on it). Also, sharing the cached state is not a good idea since it could result in incorrect results in the future - right now it should not be a problem because it end ups being used only in extent-io-tree.c:count_range_bits() where we do range validation before using the cached state. Fix this by protecting the private assignment and check of a file while holding the inode's spinlock and keep track of the task that allocated the private, so that it's used only by that task in order to prevent user-after-free issues with the cached state record as well as potentially using it incorrectly in the future.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: adding lock to protect encoder context list Add a lock for the ctx_list, to avoid accessing a NULL pointer within the 'vpu_enc_ipi_handler' function when the ctx_list has been deleted due to an unexpected behavior on the SCP IP block.

A flaw was found in podman before 1.7.0. File permissions for non-root users running in a privileged container are not correctly checked. This flaw can be abused by a low-privileged user inside the container to access any other file in the container, even if owned by the root user inside the container. It does not allow to directly escape the container, though being a privileged container means that a lot of security features are disabled when running the container. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

kernel/events/core.c in the performance subsystem in the Linux kernel before 4.0 mismanages locks during certain migrations, which allows local users to gain privileges via a crafted application, aka Android internal bug 31095224.

When using Apache Tomcat versions 10.0.0-M1 to 10.0.0-M4, 9.0.0.M1 to 9.0.34, 8.5.0 to 8.5.54 and 7.0.0 to 7.0.103 if a) an attacker is able to control the contents and name of a file on the server; and b) the server is configured to use the PersistenceManager with a FileStore; and c) the PersistenceManager is configured with sessionAttributeValueClassNameFilter="null" (the default unless a SecurityManager is used) or a sufficiently lax filter to allow the attacker provided object to be deserialized; and d) the attacker knows the relative file path from the storage location used by FileStore to the file the attacker has control over; then, using a specifically crafted request, the attacker will be able to trigger remote code execution via deserialization of the file under their control. Note that all of conditions a) to d) must be true for the attack to succeed.

The msm_ipc_router_bind_control_port function in net/ipc_router/ipc_router_core.c in the IPC router kernel module for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, does not verify that a port is a client port, which allows attackers to gain privileges or cause a denial of service (race condition and list corruption) by making many BIND_CONTROL_PORT ioctl calls.

The networking implementation in the Linux kernel through 4.3.3, as used in Android and other products, does not validate protocol identifiers for certain protocol families, which allows local users to cause a denial of service (NULL function pointer dereference and system crash) or possibly gain privileges by leveraging CLONE_NEWUSER support to execute a crafted SOCK_RAW application.

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock to avoid racing with checkpoint, otherwise, filesystem metadata including blkaddr in dnode, inode fields and .total_valid_block_count may be corrupted after SPO case.

An insecure modification flaw in the /etc/kubernetes/kubeconfig file was found in OpenShift. This flaw allows an attacker with access to a running container which mounts /etc/kubernetes or has local access to the node, to copy this kubeconfig file and attempt to add their own node to the OpenShift cluster. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. This flaw affects versions before openshift4/ose-machine-config-operator v4.7.0-202105111858.p0.

OpenSSH through 10.0, when common types of DRAM are used, might allow row hammer attacks (for authentication bypass) because the integer value of authenticated in mm_answer_authpassword does not resist flips of a single bit. NOTE: this is applicable to a certain threat model of attacker-victim co-location in which the attacker has user privileges. NOTE: this is disputed by the Supplier, who states "we do not consider it to be the application's responsibility to defend against platform architectural weaknesses."