In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: protect device queue against concurrent access In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path.

In the Linux kernel, the following vulnerability has been resolved: media: pci: cx23885: check cx23885_vdev_init() return cx23885_vdev_init() can return a NULL pointer, but that pointer is used in the next line without a check. Add a NULL pointer check and go to the error unwind if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_none After grabbing q->sysfs_lock, q->elevator may become NULL because of elevator switch. Fix the NULL dereference on q->elevator by checking it with lock.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs If init debugfs failed during device registration due to memory allocation failure, debugfs_remove_recursive() is called, after which debugfs_dir is not set to NULL. debugfs_remove_recursive() will be called again during device removal. As a result, illegal pointer is accessed. [ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs! ... [ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 1669.872669] pc : down_write+0x24/0x70 [ 1669.876315] lr : down_write+0x1c/0x70 [ 1669.879961] sp : ffff000036f53a30 [ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8 [ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000 [ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270 [ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8 [ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310 [ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10 [ 1669.914982] x17: 0000000000000000 x16: 0000000000000000 [ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870 [ 1669.925555] x13: 0000000000000040 x12: 0000000000000228 [ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0 [ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10 [ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff [ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00 [ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000 [ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001 [ 1669.962563] Call trace: [ 1669.965000] down_write+0x24/0x70 [ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0 [ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main] [ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw] [ 1669.984175] pci_device_remove+0x48/0xd8 [ 1669.988082] device_release_driver_internal+0x1b4/0x250 [ 1669.993282] device_release_driver+0x28/0x38 [ 1669.997534] pci_stop_bus_device+0x84/0xb8 [ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40 [ 1670.007244] remove_store+0xfc/0x140 [ 1670.010802] dev_attr_store+0x44/0x60 [ 1670.014448] sysfs_kf_write+0x58/0x80 [ 1670.018095] kernfs_fop_write+0xe8/0x1f0 [ 1670.022000] __vfs_write+0x60/0x190 [ 1670.025472] vfs_write+0xac/0x1c0 [ 1670.028771] ksys_write+0x6c/0xd8 [ 1670.032071] __arm64_sys_write+0x24/0x30 [ 1670.035977] el0_svc_common+0x78/0x130 [ 1670.039710] el0_svc_handler+0x38/0x78 [ 1670.043442] el0_svc+0x8/0xc To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().

In the Linux kernel, the following vulnerability has been resolved: btrfs: insert tree mod log move in push_node_left There is a fairly unlikely race condition in tree mod log rewind that can result in a kernel panic which has the following trace: [530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096 [530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002 [530.618] #PF: supervisor read access in kernel mode [530.629] #PF: error_code(0x0000) - not-present page [530.641] PGD 0 P4D 0 [530.647] Oops: 0000 [#1] SMP [530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1 [530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017 [530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00 [530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246 [530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100 [530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8 [530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff [530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000 [530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0 [530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000 [530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0 [530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [530.928] Call Trace: [530.934] ? btrfs_printk+0x13b/0x18c [530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130 [530.955] btrfs_map_bio+0x75/0x330 [530.963] ? kmem_cache_alloc+0x12a/0x2d0 [530.973] ? btrfs_submit_metadata_bio+0x63/0x100 [530.984] btrfs_submit_metadata_bio+0xa4/0x100 [530.995] submit_extent_page+0x30f/0x360 [531.004] read_extent_buffer_pages+0x49e/0x6d0 [531.015] ? submit_extent_page+0x360/0x360 [531.025] btree_read_extent_buffer_pages+0x5f/0x150 [531.037] read_tree_block+0x37/0x60 [531.046] read_block_for_search+0x18b/0x410 [531.056] btrfs_search_old_slot+0x198/0x2f0 [531.066] resolve_indirect_ref+0xfe/0x6f0 [531.076] ? ulist_alloc+0x31/0x60 [531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0 [531.095] find_parent_nodes+0x720/0x1830 [531.105] ? ulist_alloc+0x10/0x60 [531.113] iterate_extent_inodes+0xea/0x370 [531.123] ? btrfs_previous_extent_item+0x8f/0x110 [531.134] ? btrfs_search_path_in_tree+0x240/0x240 [531.146] iterate_inodes_from_logical+0x98/0xd0 [531.157] ? btrfs_search_path_in_tree+0x240/0x240 [531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180 [531.179] btrfs_ioctl+0xe2/0x2eb0 This occurs when logical inode resolution takes a tree mod log sequence number, and then while backref walking hits a rewind on a busy node which has the following sequence of tree mod log operations (numbers filled in from a specific example, but they are somewhat arbitrary) REMOVE_WHILE_FREEING slot 532 REMOVE_WHILE_FREEING slot 531 REMOVE_WHILE_FREEING slot 530 ... REMOVE_WHILE_FREEING slot 0 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 ADD slot 455 ADD slot 454 ADD slot 453 ... ADD slot 0 MOVE src slot 0 -> dst slot 456 nritems 533 REMOVE slot 455 REMOVE slot 454 REMOVE slot 453 ... REMOVE slot 0 When this sequence gets applied via btrfs_tree_mod_log_rewind, it allocates a fresh rewind eb, and first inserts the correct key info for the 533 elements, then overwrites the first 456 of them, then decrements the count by 456 via the add ops, then rewinds the move by doing a memmove from 456:988->0:532. We have never written anything past 532, ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer in skb_segment_list Commit 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") introduced UDP listifyed GRO. The segmentation relies on frag_list being untouched when passing through the network stack. This assumption can be broken sometimes, where frag_list itself gets pulled into linear area, leaving frag_list being NULL. When this happens it can trigger following NULL pointer dereference, and panic the kernel. Reverse the test condition should fix it. [19185.577801][ C1] BUG: kernel NULL pointer dereference, address: ... [19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390 ... [19185.834644][ C1] Call Trace: [19185.841730][ C1] <TASK> [19185.848563][ C1] __udp_gso_segment+0x33e/0x510 [19185.857370][ C1] inet_gso_segment+0x15b/0x3e0 [19185.866059][ C1] skb_mac_gso_segment+0x97/0x110 [19185.874939][ C1] __skb_gso_segment+0xb2/0x160 [19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0 [19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90 [19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200 [19185.910003][ C1] ip_local_deliver_finish+0x44/0x60 [19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0 [19185.927834][ C1] process_backlog+0x88/0x130 [19185.935840][ C1] __napi_poll+0x27/0x150 [19185.943447][ C1] net_rx_action+0x27e/0x5f0 [19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core] [19185.960848][ C1] __do_softirq+0xbc/0x25d [19185.968607][ C1] irq_exit_rcu+0x83/0xb0 [19185.976247][ C1] common_interrupt+0x43/0xa0 [19185.984235][ C1] asm_common_interrupt+0x22/0x40 ... [19186.094106][ C1] </TASK>

In the Linux kernel, the following vulnerability has been resolved: FS: JFS: Fix null-ptr-deref Read in txBegin Syzkaller reported an issue where txBegin may be called on a superblock in a read-only mounted filesystem which leads to NULL pointer deref. This could be solved by checking if the filesystem is read-only before calling txBegin, and returning with appropiate error code.

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: lt8912b: Fix crash on bridge detach The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000 [0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_connector_cleanup+0x78/0x2d4 [drm] lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] sp : ffff800082ed3a90 x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000 x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122 x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000 x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8 x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038 x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48 x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: drm_connector_cleanup+0x78/0x2d4 [drm] lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] drm_bridge_detach+0x44/0x84 [drm] drm_encoder_cleanup+0x40/0xb8 [drm] drmm_encoder_alloc_release+0x1c/0x30 [drm] drm_managed_release+0xac/0x148 [drm] drm_dev_put.part.0+0x88/0xb8 [drm] devm_drm_dev_init_release+0x14/0x24 [drm] devm_action_release+0x14/0x20 release_nodes+0x5c/0x90 devres_release_all+0x8c/0xe0 device_unbind_cleanup+0x18/0x68 device_release_driver_internal+0x208/0x23c driver_detach+0x4c/0x94 bus_remove_driver+0x70/0xf4 driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 tidss_platform_driver_exit+0x18/0xb2c [tidss] __arm64_sys_delete_module+0x1a0/0x2b4 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x60/0x10c do_el0_svc_compat+0x1c/0x40 el0_svc_compat+0x40/0xac el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420)

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: media: bdisp: Add missing check for create_workqueue Add the check for the return value of the create_workqueue in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: f2fs: split initial and dynamic conditions for extent_cache Let's allocate the extent_cache tree without dynamic conditions to avoid a missing condition causing a panic as below. # create a file w/ a compressed flag # disable the compression # panic while updating extent_cache F2FS-fs (dm-64): Swapfile: last extent is not aligned to section F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N) Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 Write of size 4 at addr 0000000000000030 by task syz-executor154/3327 CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1 Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023 Call Trace: __dump_stack out/common/lib/dump_stack.c:77 [inline] dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline] f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310 ksys_fallocate out/common/fs/open.c:333 [inline] __do_sys_fallocate out/common/fs/open.c:341 [inline] __se_sys_fallocate out/common/fs/open.c:339 [inline] __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46

In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix null pointer access on DP83825/DP83826 devices The probe() function is only used for the DP83822 PHY, leaving the private data pointer uninitialized for the smaller DP83825/26 models. While all uses of the private data structure are hidden in 82822 specific callbacks, configuring the interrupt is shared across all models. This causes a NULL pointer dereference on the smaller PHYs as it accesses the private data unchecked. Verifying the pointer avoids that.

In the Linux kernel, the following vulnerability has been resolved: ice: xsk: disable txq irq before flushing hw ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] <TASK> [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] </TASK> In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings().

In the Linux kernel, the following vulnerability has been resolved: powerpc: Don't try to copy PPR for task with NULL pt_regs powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which from my (arguably very short) checking is not commonly done for other archs. This is fine, except when PF_IO_WORKER's have been created and the task does something that causes a coredump to be generated. Then we get this crash: Kernel attempted to read user page (160) - exploit attempt? (uid: 1000) BUG: Kernel NULL pointer dereference on read at 0x00000160 Faulting instruction address: 0xc0000000000c3a60 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0 REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8 ... NIP memcpy_power7+0x200/0x7d0 LR ppr_get+0x64/0xb0 Call Trace: ppr_get+0x40/0xb0 (unreliable) __regset_get+0x180/0x1f0 regset_get_alloc+0x64/0x90 elf_core_dump+0xb98/0x1b60 do_coredump+0x1c34/0x24a0 get_signal+0x71c/0x1410 do_notify_resume+0x140/0x6f0 interrupt_exit_user_prepare_main+0x29c/0x320 interrupt_exit_user_prepare+0x6c/0xa0 interrupt_return_srr_user+0x8/0x138 Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL pt_regs. Check for a valid pt_regs in both ppc_get/ppr_set, and return an error if not set. The actual error value doesn't seem to be important here, so just pick -EINVAL. [mpe: Trim oops in change log, add Fixes & Cc stable]

In the Linux kernel, the following vulnerability has been resolved: trace_events_hist: add check for return value of 'create_hist_field' Function 'create_hist_field' is called recursively at trace_events_hist.c:1954 and can return NULL-value that's why we have to check it to avoid null pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() If share is , share->path is NULL and it cause NULL pointer dereference issue.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Do not unset preset when cleaning up codec Several functions that take part in codec's initialization and removal are re-used by ASoC codec drivers implementations. Drivers mimic the behavior of hda_codec_driver_probe/remove() found in sound/pci/hda/hda_bind.c with their component->probe/remove() instead. One of the reasons for that is the expectation of snd_hda_codec_device_new() to receive a valid pointer to an instance of struct snd_card. This expectation can be met only once sound card components probing commences. As ASoC sound card may be unbound without codec device being actually removed from the system, unsetting ->preset in snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load scenario causing null-ptr-deref. Preset is assigned only once, during device/driver matching whereas ASoC codec driver's module reloading may occur several times throughout the lifetime of an audio stack.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame() It is preferable to exit through the out: label because internal debugging functions are located there.

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: fix NULL-ptr deref in offchan check If, e.g. in AP mode, the link was already created by userspace but not activated yet, it has a chandef but the chandef isn't valid and has no channel. Check for this and ignore this link.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: do not run mt76_unregister_device() on unregistered hw Trying to probe a mt7921e pci card without firmware results in a successful probe where ieee80211_register_hw hasn't been called. When removing the driver, ieee802111_unregister_hw is called unconditionally leading to a kernel NULL pointer dereference. Fix the issue running mt76_unregister_device routine just for registered hw.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (axi-fan-control) Fix possible NULL pointer dereference axi_fan_control_irq_handler(), dependent on the private axi_fan_control_data structure, might be called before the hwmon device is registered. That will cause an "Unable to handle kernel NULL pointer dereference" error.

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix a NULL pointer dereference The LRU mechanism may look up a resource in the process of being removed from an object. The locking rules here are a bit unclear but it looks currently like res->bo assignment is protected by the LRU lock, whereas bo->resource is protected by the object lock, while *clearing* of bo->resource is also protected by the LRU lock. This means that if we check that bo->resource points to the LRU resource under the LRU lock we should be safe. So perform that check before deciding to swap out a bo. That avoids dereferencing a NULL bo->resource in ttm_bo_swapout().

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue System crash when qla2x00_start_sp(sp) returns error code EGAIN and wake_up gets called for uninitialized wait queue sp->nvme_ls_waitq. qla2xxx [0000:37:00.1]-2121:5: Returning existing qpair of ffff8ae2c0513400 for idx=0 qla2xxx [0000:37:00.1]-700e:5: qla2x00_start_sp failed = 11 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021 Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc] RIP: 0010:__wake_up_common+0x4c/0x190 RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8 R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7c/0xc0 qla_nvme_ls_req+0x355/0x4c0 [qla2xxx] ? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc] ? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc] ? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc] Remove unused nvme_ls_waitq wait queue. nvme_ls_waitq logic was removed previously in the commits tagged Fixed: below.

In the Linux kernel, the following vulnerability has been resolved: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239. The commit above is reverted as it did not solve the original issue. gsm_cleanup_mux() tries to free up the virtual ttys by calling gsm_dlci_release() for each available DLCI. There, dlci_put() is called to decrease the reference counter for the DLCI via tty_port_put() which finally calls gsm_dlci_free(). This already clears the pointer which is being checked in gsm_cleanup_mux() before calling gsm_dlci_release(). Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux() as done in the reverted commit. The commit introduces a null pointer dereference: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x156/0x420 ? search_exception_tables+0x37/0x50 ? fixup_exception+0x21/0x310 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? tty_port_put+0x19/0xa0 gsmtty_cleanup+0x29/0x80 [n_gsm] release_one_tty+0x37/0xe0 process_one_work+0x1e6/0x3e0 worker_thread+0x4c/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The actual issue is that nothing guards dlci_put() from being called multiple times while the tty driver was triggered but did not yet finished calling gsm_dlci_free().

In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix peer flow lists handling The cited change refactored mlx5e_tc_del_fdb_peer_flow() to only clear DUP flag when list of peer flows has become empty. However, if any concurrent user holds a reference to a peer flow (for example, the neighbor update workqueue task is updating peer flow's parent encap entry concurrently), then the flow will not be removed from the peer list and, consecutively, DUP flag will remain set. Since mlx5e_tc_del_fdb_peers_flow() calls mlx5e_tc_del_fdb_peer_flow() for every possible peer index the algorithm will try to remove the flow from eswitch instances that it has never peered with causing either NULL pointer dereference when trying to remove the flow peer list head of peer_index that was never initialized or a warning if the list debug config is enabled[0]. Fix the issue by always removing the peer flow from the list even when not releasing the last reference to it. [0]: [ 3102.985806] ------------[ cut here ]------------ [ 3102.986223] list_del corruption, ffff888139110698->next is NULL [ 3102.986757] WARNING: CPU: 2 PID: 22109 at lib/list_debug.c:53 __list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.987561] Modules linked in: act_ct nf_flow_table bonding act_tunnel_key act_mirred act_skbedit vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcg ss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core [last unloaded: bonding] [ 3102.991113] CPU: 2 PID: 22109 Comm: revalidator28 Not tainted 6.6.0-rc6+ #3 [ 3102.991695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 3102.992605] RIP: 0010:__list_del_entry_valid_or_report+0x4f/0xc0 [ 3102.993122] Code: 39 c2 74 56 48 8b 32 48 39 fe 75 62 48 8b 51 08 48 39 f2 75 73 b8 01 00 00 00 c3 48 89 fe 48 c7 c7 48 fd 0a 82 e8 41 0b ad ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 fd 0a 82 e8 2d 0b ad ff 0f 0b [ 3102.994615] RSP: 0018:ffff8881383e7710 EFLAGS: 00010286 [ 3102.995078] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 3102.995670] RDX: 0000000000000001 RSI: ffff88885f89b640 RDI: ffff88885f89b640 [ 3102.997188] DEL flow 00000000be367878 on port 0 [ 3102.998594] RBP: dead000000000122 R08: 0000000000000000 R09: c0000000ffffdfff [ 3102.999604] R10: 0000000000000008 R11: ffff8881383e7598 R12: dead000000000100 [ 3103.000198] R13: 0000000000000002 R14: ffff888139110000 R15: ffff888101901240 [ 3103.000790] FS: 00007f424cde4700(0000) GS:ffff88885f880000(0000) knlGS:0000000000000000 [ 3103.001486] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3103.001986] CR2: 00007fd42e8dcb70 CR3: 000000011e68a003 CR4: 0000000000370ea0 [ 3103.002596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3103.003190] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3103.003787] Call Trace: [ 3103.004055] <TASK> [ 3103.004297] ? __warn+0x7d/0x130 [ 3103.004623] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.005094] ? report_bug+0xf1/0x1c0 [ 3103.005439] ? console_unlock+0x4a/0xd0 [ 3103.005806] ? handle_bug+0x3f/0x70 [ 3103.006149] ? exc_invalid_op+0x13/0x60 [ 3103.006531] ? asm_exc_invalid_op+0x16/0x20 [ 3103.007430] ? __list_del_entry_valid_or_report+0x4f/0xc0 [ 3103.007910] mlx5e_tc_del_fdb_peers_flow+0xcf/0x240 [mlx5_core] [ 3103.008463] mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] [ 3103.008944] mlx5e_flow_put+0x26/0x50 [mlx5_core] [ 3103.009401] mlx5e_delete_flower+0x25f/0x380 [mlx5_core] [ 3103.009901] tc_setup_cb_destroy+0xab/0x180 [ 3103.010292] fl_hw_destroy_filter+0x99/0xc0 [cls_flower] [ 3103.010779] __fl_delete+0x2d4/0x2f0 [cls_flower] [ 3103.0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: apparmor: avoid crash when parsed profile name is empty When processing a packed profile in unpack_profile() described like "profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}" a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: <TASK> ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment "a ns name without a following profile is allowed" inside. AFAICS, nothing can prevent unpacked "name" to be in form like ":samba-dcerpcd" - it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: team: fix null-ptr-deref when team device type is changed Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix some null pointer dereference issues in ice_ptp.c devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: check the alloc_workqueue return value in radeon_crtc_init() check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: mm: migrate: fix getting incorrect page mapping during page migration When running stress-ng testing, we found below kernel crash after a few hours: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 pc : dentry_name+0xd8/0x224 lr : pointer+0x22c/0x370 sp : ffff800025f134c0 ...... Call trace: dentry_name+0xd8/0x224 pointer+0x22c/0x370 vsnprintf+0x1ec/0x730 vscnprintf+0x2c/0x60 vprintk_store+0x70/0x234 vprintk_emit+0xe0/0x24c vprintk_default+0x3c/0x44 vprintk_func+0x84/0x2d0 printk+0x64/0x88 __dump_page+0x52c/0x530 dump_page+0x14/0x20 set_migratetype_isolate+0x110/0x224 start_isolate_page_range+0xc4/0x20c offline_pages+0x124/0x474 memory_block_offline+0x44/0xf4 memory_subsys_offline+0x3c/0x70 device_offline+0xf0/0x120 ...... After analyzing the vmcore, I found this issue is caused by page migration. The scenario is that, one thread is doing page migration, and we will use the target page's ->mapping field to save 'anon_vma' pointer between page unmap and page move, and now the target page is locked and refcount is 1. Currently, there is another stress-ng thread performing memory hotplug, attempting to offline the target page that is being migrated. It discovers that the refcount of this target page is 1, preventing the offline operation, thus proceeding to dump the page. However, page_mapping() of the target page may return an incorrect file mapping to crash the system in dump_mapping(), since the target page->mapping only saves 'anon_vma' pointer without setting PAGE_MAPPING_ANON flag. There are seveval ways to fix this issue: (1) Setting the PAGE_MAPPING_ANON flag for target page's ->mapping when saving 'anon_vma', but this can confuse PageAnon() for PFN walkers, since the target page has not built mappings yet. (2) Getting the page lock to call page_mapping() in __dump_page() to avoid crashing the system, however, there are still some PFN walkers that call page_mapping() without holding the page lock, such as compaction. (3) Using target page->private field to save the 'anon_vma' pointer and 2 bits page state, just as page->mapping records an anonymous page, which can remove the page_mapping() impact for PFN walkers and also seems a simple way. So I choose option 3 to fix this issue, and this can also fix other potential issues for PFN walkers, such as compaction.

In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7091r: Allow users to configure device events AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null pointer dereference in the kernel because the pointers to the callback functions were not set. Implement event configuration callbacks allowing users to read/write event thresholds and enable/disable event generation. Since the event spec structs are generic to AD7091R devices, also move those from the ad7091r-5 driver the base driver so they can be reused when support for ad7091r-2/-4/-8 be added.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference at hibernate During hibernate sequence the source context might not have a clk_mgr. So don't use it to look for DML2 support.

A NULL pointer dereference in Busybox's man applet leads to denial of service when a section name is supplied but no page argument is given

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock Take and hold kvm->lock for before checking sev_guest() in sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to a not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83 Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00 RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256 RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000 RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000 R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000 R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000 FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0 Call Trace: <TASK> kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371 kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363 __se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f34e9f7e9a9 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9 RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007 RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8 </TASK> with a syzlang reproducer that looks like: syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async) syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async) r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0) r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0) ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async) ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async) ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async) r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0) openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async) ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async) r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2) close(r0) (async) openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async) ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async) ioctl$KVM_RUN(r5, 0xae80, 0x0) Opportunistically use guard() to avoid having to define a new error label and goto usage.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short period of time but be a bit more straight-forward here and just check for NULL instead of changing the order of function calls. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: HID: winwing: Add NULL check in winwing_init_led() devm_kasprintf() can return a NULL pointer on failure,but this returned value in winwing_init_led() is not checked. Add NULL check in winwing_init_led(), to handle kernel NULL pointer dereference error.

A NULL pointer dereference flaw was found in vmxnet3_rq_cleanup in drivers/net/vmxnet3/vmxnet3_drv.c in the networking sub-component in vmxnet3 in the Linux Kernel. This issue may allow a local attacker with normal user privilege to cause a denial of service due to a missing sanity check during cleanup.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp2: call pm_genpd_init() only after genpd.name is set Setting the genpd's struct device's name with dev_set_name() is happening within pm_genpd_init(). If it remains NULL, things can blow up later, such as when crafting the devfs hierarchy for the power domain: Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read ... Call trace: strlen from start_creating+0x90/0x138 start_creating from debugfs_create_dir+0x20/0x178 debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144 genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90 genpd_debug_init from do_one_initcall+0x5c/0x244 do_one_initcall from kernel_init_freeable+0x19c/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28 Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name with dev_name(&genpd->dev) in genpd_debug_add.part().

A NULL pointer dereference flaw was found in the Linux kernel ipv4 stack. The socket buffer (skb) was assumed to be associated with a device before calling __ip_options_compile, which is not always the case if the skb is re-routed by ipvs. This issue may allow a local user with CAP_NET_ADMIN privileges to crash the system.

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix when get product name maybe null pointer Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in cleanup_bearer() syzbot found [1] that after blamed commit, ub->ubsock->sk was NULL when attempting the atomic_dec() : atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count); Fix this by caching the tipc_net pointer. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 0 UID: 0 PID: 5896 Comm: kworker/0:3 Not tainted 6.13.0-rc1-next-20241203-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events cleanup_bearer RIP: 0010:read_pnet include/net/net_namespace.h:387 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:cleanup_bearer+0x1f7/0x280 net/tipc/udp_media.c:820 Code: 18 48 89 d8 48 c1 e8 03 42 80 3c 28 00 74 08 48 89 df e8 3c f7 99 f6 48 8b 1b 48 83 c3 30 e8 f0 e4 60 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 74 08 48 89 df e8 1a f7 99 f6 49 83 c7 e8 48 8b 1b RSP: 0018:ffffc9000410fb70 EFLAGS: 00010206 RAX: 0000000000000006 RBX: 0000000000000030 RCX: ffff88802fe45a00 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffc9000410f900 RBP: ffff88807e1f0908 R08: ffffc9000410f907 R09: 1ffff92000821f20 R10: dffffc0000000000 R11: fffff52000821f21 R12: ffff888031d19980 R13: dffffc0000000000 R14: dffffc0000000000 R15: ffff88807e1f0918 FS: 0000000000000000(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ca050b000 CR3: 0000000031c0c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68

In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL check may lead to NULL dereference. Add NULL checks for all the kunit_kzalloc() in sound_kunit.c