Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

A vulnerability was found in Totolink X6000R AX3000 9.4.0cu.852_20230719. It has been rated as critical. This issue affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component shttpd. The manipulation leads to command injection. The exploit has been disclosed to the public and may be used. The identifier VDB-254573 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The LB-Link routers, including the BL-AC2100_AZ3 V1.0.4, BL-WR4000 v2.5.0, BL-WR9000_AE4 v2.4.9, BL-AC1900_AZ2 v1.0.2, BL-X26_AC8 v1.2.8, and BL-LTE300_DA4 V1.2.3 models, are vulnerable to unauthorized command injection. Attackers can exploit this vulnerability by accessing the /goform/set_serial_cfg interface to gain the highest level of device privileges without authorization, enabling them to remotely execute malicious commands.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

An issue discovered in sub_4117F8 function in TOTOLINK X6000R V9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the 'lang' parameter.

An issue discovered in TOTOLINK X6000R v9.4.0cu.852_B20230719 allows attackers to run arbitrary commands via the sub_41284C function.

TOTOlink EX1800T V9.1.0cu.2112_B20220316 is vulnerable to an unauthorized arbitrary command execution in the ‘admuser’ parameter of the setPasswordCfg interface of the cstecgi .cgi.

TOTOLINK EX1800T V9.1.0cu.2112_B20220316 is vulnerable to unauthorized arbitrary command execution in the lanSecDns parameter’ of the setLanConfig interface of the cstecgi .cgi

The generate_local_queue function in utils/cups-browsed.c in cups-browsed in cups-filters before 1.0.53 allows remote IPP printers to execute arbitrary commands via shell metacharacters in the host name. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-2707.

Tenda AX12 V22.03.01.46 has been discovered to contain a command injection vulnerability in the 'mac' parameter at /goform/SetOnlineDevName.

In l2cble_process_sig_cmd of l2c_ble.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution over Bluetooth with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12 Android-12LAndroid ID: A-230494481

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_422BD4 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_411D00 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_ The 41A414 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_ 41D494 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_415498 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_412688 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_415730 function.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in HTTP interface of ADT LifeShield DIY HD Video Doorbell allows an attacker on the same network to execute commands on the device. This issue affects: ADT LifeShield DIY HD Video Doorbell version 1.0.02R09 and prior versions.

DrayTek Vigor3900 1.5.1.3 allows attackers to inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the sign_cacertificate function.

Tenda G3 v3.0 v15.11.0.20 was discovered to contain a command injection vulnerability via the formSetDebugCfg function.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the get_apcli_conn_info function.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK20 before 2.6.1.36, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.36, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, and RBS50Y before 2.6.1.40.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-1860 firmware version 1.04B03 WiFi extenders. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the Authorization request header, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-10880.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.58 and R7500v2 before 1.0.3.48.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects SRK60 before 2.5.3.110, SRR60 before 2.5.3.110, and SRS60 before 2.5.3.110.

NETGEAR R8300 devices before 1.0.2.134 are affected by command injection by an unauthenticated attacker.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, RBS850 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, and RBS840 before 3.2.15.25.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

A command injection in the parsing_xml_stasurvey function inside libcgifunc.so of the D-Link DAP-X1860 repeater 1.00 through 1.01b05-01 allows attackers (within range of the repeater) to run shell commands as root during the setup process of the repeater, via a crafted SSID. Also, network names containing single quotes (in the range of the repeater) can result in a denial of service.

A command injection vulnerability in Ivanti Sentry prior to 9.19.0 allows unauthenticated threat actor to execute arbitrary commands on the underlying operating system of the appliance within the same physical or logical network.

TP-Link TL-WR841N ated_tp Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link TL-WR841N routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the ated_tp service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21825.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DVA-2800 and DSL-2888A routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the dhttpd service, which listens on TCP port 8008 by default. When parsing the path parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the web server. Was ZDI-CAN-10911.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK852 before 3.2.17.12, RBK853 before 3.2.17.12, RBK854 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_41E588 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_41590C function.

NETGEAR XR1000 devices before 1.0.0.58 are affected by command injection by an unauthenticated attacker.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

A malicious user on the same LAN could use DNS spoofing followed by a command injection attack to trick a NAS device into loading through an unsecured HTTP call. Addressed this vulnerability by disabling checks for internet connectivity using HTTP.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects SRK60 before 2.5.2.104, SRS60 before 2.5.2.104, SRR60 before 2.5.2.104, SRK60B03 before 2.5.2.104, SRK60B04 before 2.5.2.104, SRK60B05 before 2.5.2.104, and SRK60B06 before 2.5.2.104.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBK753 before 3.2.15.25, RBK753S before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RBK852 before 3.2.15.25, RBK853 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_411994 function.

TOTOLINK X6000R v9.4.0cu.652_B20230116 was discovered to contain a remote command execution (RCE) vulnerability via the sub_417094 function.

Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBW30 before 2.6.2.2, RBS40V before 2.6.2.4, RBK852 before 3.2.17.12, RBK853 before 3.2.17.12, RBK854 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, RBK752 before 3.2.17.12, RBK753 before 3.2.17.12, RBK753S before 3.2.17.12, RBK754 before 3.2.17.12, RBR750 before 3.2.17.12, and RBS750 before 3.2.17.12.