Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the wakeup_mac parameter in the Wake-On-LAN (WoL) function. This vulnerability is exploited via a crafted payload.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field.

An OS command injection vulnerability exists in web2py 2.24.1 and earlier. When the product is configured to use notifySendHandler for logging (not the default configuration), a crafted web request may execute an arbitrary OS command on the web server using the product.

In GenieACS 1.2.x before 1.2.8, the UI interface API is vulnerable to unauthenticated OS command injection via the ping host argument (lib/ui/api.ts and lib/ping.ts). The vulnerability arises from insufficient input validation combined with a missing authorization check.

OS Command Injection in GitHub repository gogs/gogs prior to 0.12.11.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

Remote Code Execution (RCE) vulnerability exists in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicious users can use this vulnerability to use "\ " or backticks to bypass the shell metacharacters in the ssid0 or ssid1 parameters to execute arbitrary commands.This vulnerability is due to the fact that CVE-2019-17509 is not fully patched and can be bypassed by using line breaks or backticks on its basis.

Linear eMerge E3-Series devices allow Command Injections.

netis-systems MEX605 v2.00.06 allows attackers to execute arbitrary OS commands via a crafted payload to the tracert page.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

mySCADA myPRO: Versions 8.20.0 and prior has a vulnerable debug interface which includes a ping utility, which may allow an attacker to inject arbitrary operating system commands.

dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.

naholyr github-todos 3.1.0 is vulnerable to command injection. The range argument for the _hook subcommand is concatenated without any validation, and is directly used by the exec function.

An issue in YeaLinkSIP-T19P-E2 v.53.84.0.15 allows a remote privileged attacker to execute arbitrary code via a crafted request the ping function of the diagnostic component.

Improper neutralization of special elements in the SonicWall SSL-VPN SMA100 series management interface allows a remote authenticated attacker to inject OS Commands which potentially leads to remote command execution vulnerability or denial of service (DoS) attack.

In WhatsUp Gold versions released before 2023.1.3, a Remote Code Execution issue exists in Progress WhatsUp Gold. This vulnerability allows an unauthenticated attacker to achieve the RCE as a service account through NmApi.exe.

TOTOLINK EX1200T V4.1.2cu.5215 is affected by a command injection vulnerability that can remotely execute arbitrary code.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceMac of the file global.so which can control deviceName to attack.

Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in mail sending and receiving component in Synology Mail Station before 20211105-10315 allows remote authenticated users to execute arbitrary commands via unspecified vectors.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. Multiple functions in the bpserverd daemon were vulnerable to arbitrary remote code execution as root. The vulnerability was caused by untrusted input (received by the server) being passed to system calls.

A vulnerability was found in D-Link DAR-8000-10 up to 20230809. It has been classified as critical. This affects an unknown part of the file /app/sys1.php. The manipulation of the argument cmd with the input id leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-238047. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and 6.4.0, version 6.3.15 and below, version 6.2.6 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function NTPSyncWithHost of the file system.so which can control hostTime to attack.

An issue was discovered in ExecuteCommand() in AVEVA Edge (formerly InduSoft Web Studio) versions R2020 and prior that allows unauthenticated arbitrary commands to be executed.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in the function setDiagnosisCfg of the file lib/cste_modules/system.so to control the ipDoamin.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

# Vulnerability in `title` function **Description**: the `title` function defined in `lib/termsupport.zsh` uses `print` to set the terminal title to a user-supplied string. In Oh My Zsh, this function is always used securely, but custom user code could use the `title` function in a way that is unsafe. **Fixed in**: [a263cdac](https://github.com/ohmyzsh/ohmyzsh/commit/a263cdac). **Impacted areas**: - `title` function in `lib/termsupport.zsh`. - Custom user code using the `title` function.

A remote command execution (RCE) vulnerability was found in FeMiner wms V1.0 in /wms/src/system/datarec.php. The $_POST[r_name] is directly passed into the $mysqlstr and is executed by exec.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setLanguageCfg of the file global.so which can control langType to attack.

A vulnerability, which was classified as critical, has been found in MailCleaner up to 2023.03.14. This issue affects some unknown processing of the component Email Handler. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-262307.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in function setDeviceName of the file global.so which can control thedeviceName to attack.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.2 and below, version 8.5.2 and below, version 8.4.2 and below, version 8.3.2 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests to the alarm dashboard and controller config handlers.

FiberHome ONU GPON AN5506-04-F RP2617 is affected by an OS command injection vulnerability. This vulnerability allows the attacker, once logged in, to send commands to the operating system as the root user via the ping diagnostic tool, bypassing the IP address field, and concatenating OS commands with a semicolon.

A vulnerability has been found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This vulnerability affects the function setTracerouteCfg. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-237514 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Dell DM5500 contains a privilege escalation vulnerability in the appliance. A remote attacker with low privileges could potentially exploit this vulnerability to escape the restricted shell and gain root access to the appliance.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an authenticated remote command execution (RCE) vulnerability via the "mru" parameter in the "cstecgi.cgi" binary.

TP-Link Archer A7 Archer A7(US)_V5_210519 is affected by a command injection vulnerability in /usr/bin/tddp. The vulnerability is caused by the program taking part of the received data packet as part of the command. This will cause an attacker to execute arbitrary commands on the router.

Sharetribe Go is a source available marketplace software. In affected versions operating system command injection is possible on installations of Sharetribe Go, that do not have a secret AWS Simple Notification Service (SNS) notification token configured via the `sns_notification_token` configuration parameter. This configuration parameter is unset by default. The vulnerability has been patched in version 10.2.1. Users who are unable to upgrade should set the`sns_notification_token` configuration parameter to a secret value.

A OS Command Injection vulnerability was discovered in Artica Proxy 4.30.000000. Attackers can execute OS commands in cyrus.events.php with GET param logs and POST param rp.

Tenda G3 Router firmware v15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the usbPartitionName parameter in the formSetUSBPartitionUmount function.

A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023. This affects the function setDiagnosisCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237513 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Sapido BR270n, BRC76n, GR297 and RB1732 and classified as critical. Affected by this issue is some unknown functionality of the file ip/syscmd.htm. The manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-214592.

The Device42 Remote Collector before 17.05.01 does not sanitize user input in its SNMP Connectivity utility. This allows an authenticated attacker (with access to the console application) to execute arbitrary OS commands and escalate privileges.

Adtran 834-5 11.1.0.101-202106231430, and fixed as of SmartOS Version 12.6.3.1, devices allow OS Command Injection via shell metacharacters to the Ping or Traceroute utility.

kustomize-controller is a Kubernetes operator, specialized in running continuous delivery pipelines for infrastructure and workloads defined with Kubernetes manifests and assembled with Kustomize. Users that can create Kubernetes Secrets, Service Accounts and Flux Kustomization objects, could execute commands inside the kustomize-controller container by embedding a shell script in a Kubernetes Secret. This can be used to run `kubectl` commands under the Service Account of kustomize-controller, thus allowing an authenticated Kubernetes user to gain cluster admin privileges. In affected versions multitenant environments where non-admin users have permissions to create Flux Kustomization objects are affected by this issue. This vulnerability was fixed in kustomize-controller v0.15.0 (included in flux2 v0.18.0) released on 2021-10-08. Starting with v0.15, the kustomize-controller no longer executes shell commands on the container OS and the `kubectl` binary has been removed from the container image. To prevent the creation of Kubernetes Service Accounts with `secrets` in namespaces owned by tenants, a Kubernetes validation webhook such as Gatekeeper OPA or Kyverno can be used.

A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service.

TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.

There is a Potential Zip Slip Vulnerability and OS Command Injection Vulnerability on the management system of baserCMS. Users with permissions to upload files may upload crafted zip files which may execute arbitrary commands on the host operating system. This is a vulnerability that needs to be addressed when the management system is used by an unspecified number of users. If you are eligible, please update to the new version as soon as possible.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the Hostname parameter within the WAN settings. This vulnerability is exploited via a crafted payload.

The affected product is vulnerable to a parameter injection via passphrase, which enables the attacker to supply uncontrolled input.