A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetAlarm param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetWifi param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetMask param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetAutoFocus param is not object. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetTime param is not object. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetNtp param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. Disconnect param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestEmail param is not object. An attacker can send an HTTP request to trigger this vulnerability.

Multiple denial of service vulnerabilities exist in the cgiserver.cgi JSON command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. GetMdState param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetUpnp param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. TestFtp param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi JSON command parser functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. SetPtzSerial param is not object. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the netserver recv_command functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted network request can lead to a reboot. An attacker can send a malicious packet to trigger this vulnerability.

An incorrect default permission vulnerability exists in the cgiserver.cgi cgi_check_ability functionality of reolink RLC-410W v3.0.0.136_20121102. In cgi_check_ability the Format API does not have a specific case, the user permission will default to 7. This will give non-administrative users the possibility to format the SD card and reboot the device.

A denial of service vulnerability exists in the cgiserver.cgi Upgrade API functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to a reboot. An attacker can send an HTTP request to trigger this vulnerability.

A memory corruption vulnerability exists in the netserver parse_command_list functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to an out-of-bounds write. An attacker can send an HTTP request to trigger this vulnerability.

A denial of service vulnerability exists in the cgiserver.cgi API command parser functionality of Reolink RLC-410W v3.0.0.136_20121102. A specially-crafted series of HTTP requests can lead to denial of service. An attacker can send an HTTP request to trigger this vulnerability.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(20), 7.3(2)D1(1), and 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). UCS 6200 and 6300 Fabric Interconnect are affected in versions prior to 3.2(2b).

A vulnerability in the Cisco Fabric Services component of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a buffer overflow, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow, resulting in process crashes and a DoS condition on the device. MDS 9000 Series Multilayer Switches are affected running software versions prior to 6.2(25), 8.1(1b), 8.3(1). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected running software versions prior to 7.0(3)F3(5) Nexus 7000 and 7700 Series Switches are affected running software versions prior to 6.2(22) and 8.2(3). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected running software versions prior to 7.0(3)F3(5). UCS 6200, 6300, and 6400 Fabric Interconnects are affected running software versions prior to 3.2(3j) and 4.0(2a).

A denial of service vulnerability exists when Microsoft Hyper-V Network Switch on a host server fails to properly validate input from a privileged user on a guest operating system, aka 'Windows Hyper-V Denial of Service Vulnerability'. This CVE ID is unique from CVE-2019-0712, CVE-2019-1309, CVE-2019-1399.

A denial of service vulnerability exists when Microsoft Hyper-V Network Switch on a host server fails to properly validate input from a privileged user on a guest operating system, aka 'Windows Hyper-V Denial of Service Vulnerability'. This CVE ID is unique from CVE-2019-0712, CVE-2019-1310, CVE-2019-1399.

A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the Raw Socket Transport feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper parsing of Raw Socket Transport payloads. An attacker could exploit this vulnerability by establishing a TCP session and then sending a malicious TCP segment via IPv4 to an affected device. This cannot be exploited via IPv6, as the Raw Socket Transport feature does not support IPv6 as a network layer protocol.

A denial of service vulnerability exists when Microsoft Hyper-V Network Switch on a host server fails to properly validate input from a privileged user on a guest operating system, aka 'Windows Hyper-V Denial of Service Vulnerability'. This CVE ID is unique from CVE-2019-1309, CVE-2019-1310, CVE-2019-1399.

A flaw was found in Red Hat 3scale API Management Platform 2. The 3scale backend does not perform preventive handling on user-requested date ranges in certain queries allowing a malicious authenticated user to submit a request with a sufficiently large date range to eventually yield an internal server error resulting in denial of service. The highest threat from this vulnerability is to system availability.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.

A denial of service vulnerability exists when Microsoft Hyper-V Network Switch on a host server fails to properly validate input from a privileged user on a guest operating system, aka "Windows Hyper-V Denial of Service Vulnerability." This affects Windows 10, Windows 10 Servers.

A vulnerability in the Border Gateway Protocol (BGP) Multicast VPN (MVPN) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a BGP session to repeatedly reset, causing a partial denial of service (DoS) condition due to the BGP session being down. The vulnerability is due to incorrect parsing of a specific type of BGP MVPN update message. An attacker could exploit this vulnerability by sending this BGP MVPN update message to a targeted device. A successful exploit could allow the attacker to cause the BGP peer connections to reset, which could lead to BGP route instability and impact traffic. The incoming BGP MVPN update message is valid but is parsed incorrectly by the NX-OS device, which could send a corrupted BGP update to the configured BGP peer. Note: The Cisco implementation of BGP accepts incoming BGP traffic from only explicitly configured peers. To exploit this vulnerability, an attacker must send a specific BGP MVPN update message over an established TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the trusted network of the affected system.

A vulnerability in the FTP inspection engine of Cisco Adaptive Security (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of FTP data. An attacker could exploit this vulnerability by sending malicious FTP traffic through an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

A vulnerability in the Common Open Policy Service (COPS) engine of Cisco IOS XE Software on Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to crash a device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a malformed COPS message to the device. A successful exploit could allow the attacker to crash the device.

A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by sending a malformed Flexible NetFlow Version 9 packet to the Control and Provisioning of Wireless Access Points (CAPWAP) data port of an affected device. An exploit could allow the attacker to trigger an infinite loop, resulting in a process crash that would cause a reload of the device.

A vulnerability in the web interface of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition. Note: This vulnerability applies to IP Version 4 (IPv4) and IP Version 6 (IPv6) HTTP traffic.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol handler of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software on Catalyst 4500 Series Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the software processes specific SNMP object identifiers. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: To exploit this vulnerability by using SNMPv2c or earlier, the attacker must know the SNMP read-only community string for an affected system. To exploit this vulnerability by using SNMPv3, the attacker must know the user credentials for the affected system.

A vulnerability in the management REST API of Cisco Industrial Network Director (IND) could allow an authenticated, remote attacker to cause the CPU utilization to increase to 100 percent, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of requests sent to the REST API. An attacker could exploit this vulnerability by sending a crafted request to the REST API. A successful exploit could allow the attacker to cause a permanent DoS condition that is due to high CPU utilization. Manual intervention may be required to recover the Cisco IND.

A vulnerability in the IPv6 packet processing engine of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet through an affected device. A successful exploit could allow the attacker to cause an unexpected reboot of the switch, leading to a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected.

A vulnerability in the multicast DNS (mDNS) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of mDNS packets. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device. A successful exploit could cause a device to reload, resulting in a DoS condition.

A vulnerability in DNS over IPv6 packet processing for Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper length validation of a field in an IPv6 DNS packet. An attacker could exploit this vulnerability by sending a crafted DNS query over IPv6, which traverses the affected device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability is specific to DNS over IPv6 traffic only.

An inaccurate frame deduplication process in ChirpStack Network Server 3.9.0 allows a malicious gateway to perform uplink Denial of Service via malformed frequency attributes in CollectAndCallOnceCollect in internal/uplink/collect.go. NOTE: the vendor's position is that there are no "guarantees that allowing untrusted LoRa gateways to the network should still result in a secure network.

customapp in Cybozu Office 9.9.0 through 10.3.0 allows remote authenticated users to cause a denial of service (excessive database locking) via a crafted CSV file, a different vulnerability than CVE-2016-1153.

A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063.

A vulnerability in the Polaris kernel of Cisco Catalyst 9200 Series Switches could allow an unauthenticated, remote attacker to crash the device. The vulnerability is due to insufficient packet size validation. An attacker could exploit this vulnerability by sending jumbo frames or frames larger than the configured MTU size to the management interface of this device. A successful exploit could allow the attacker to crash the device fully before an automatic recovery.

IBM WebSphere Cast Iron Solution 7.0.0 and 7.5.0.0 is vulnerable to External Service Interaction attack, caused by improper validation of user-supplied input. A remote attacker could exploit this vulnerability to induce the application to perform server-side DNS lookups or HTTP requests to arbitrary domain names. By submitting suitable payloads, an attacker can cause the application server to attack other systems that it can interact with. IBM X-Force ID: 119516.

Huawei USG9520, USG9560, and USG9580 unified security gateways with software before V300R001C01SPCa00 allow remote authenticated users to cause a denial of service (device restart) via an unspecified command parameter.