In the Linux kernel, the following vulnerability has been resolved: objtool, nvmet: Fix out-of-bounds stack access in nvmet_ctrl_state_show() The csts_state_names[] array only has six sparse entries, but the iteration code in nvmet_ctrl_state_show() iterates seven, resulting in a potential out-of-bounds stack read. Fix that. Fixes the following warning with an UBSAN kernel: vmlinux.o: warning: objtool: .text.nvmet_ctrl_state_show: unexpected end of section

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Decrement TID on RX peer frag setup error handling Currently, TID is not decremented before peer cleanup, during error handling path of ath12k_dp_rx_peer_frag_setup(). This could lead to out-of-bounds access in peer->rx_tid[]. Hence, add a decrement operation for TID, before peer cleanup to ensures proper cleanup and prevents out-of-bounds access issues when the RX peer frag setup fails. Found during code review. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-boundary access in dnode page As Jiaming Zhang reported: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x1c1/0x2a0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x17e/0x800 mm/kasan/report.c:480 kasan_report+0x147/0x180 mm/kasan/report.c:593 data_blkaddr fs/f2fs/f2fs.h:3053 [inline] f2fs_data_blkaddr fs/f2fs/f2fs.h:3058 [inline] f2fs_get_dnode_of_data+0x1a09/0x1c40 fs/f2fs/node.c:855 f2fs_reserve_block+0x53/0x310 fs/f2fs/data.c:1195 prepare_write_begin fs/f2fs/data.c:3395 [inline] f2fs_write_begin+0xf39/0x2190 fs/f2fs/data.c:3594 generic_perform_write+0x2c7/0x910 mm/filemap.c:4112 f2fs_buffered_write_iter fs/f2fs/file.c:4988 [inline] f2fs_file_write_iter+0x1ec8/0x2410 fs/f2fs/file.c:5216 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x546/0xa90 fs/read_write.c:686 ksys_write+0x149/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x3d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is in the corrupted image, there is a dnode has the same node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to access block address in dnode at offset 934, however it parses the dnode as inode node, so that get_dnode_addr() returns 360, then it tries to access page address from 360 + 934 * 4 = 4096 w/ 4 bytes. To fix this issue, let's add sanity check for node id of all direct nodes during f2fs_get_dnode_of_data().

In the Linux kernel, the following vulnerability has been resolved: net/mdiobus: Fix potential out-of-bounds clause 45 read/write access When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via C45 (clause 45) mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before C45 read/write operation. While this excludes this access from any statistics, it improves security of read/write operation.

In the Linux kernel, the following vulnerability has been resolved: clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data When num_parents is 4, __clk_register() occurs an out-of-bounds when accessing parent_names member. Use ARRAY_SIZE() instead of hardcode number here. BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8 Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59 Hardware name: NXP i.MX95 19X19 board (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x8c/0xcc print_report+0x398/0x5fc kasan_report+0xd4/0x114 __asan_report_load8_noabort+0x20/0x2c __clk_register+0x1844/0x20d8 clk_hw_register+0x44/0x110 __clk_hw_register_mux+0x284/0x3a8 imx95_bc_probe+0x4f4/0xa70

In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix out-of-bounds access in nvmet_enable_port When trying to enable a port that has no transport configured yet, nvmet_enable_port() uses NVMF_TRTYPE_MAX (255) to query the transports array, causing an out-of-bounds access: [ 106.058694] BUG: KASAN: global-out-of-bounds in nvmet_enable_port+0x42/0x1da [ 106.058719] Read of size 8 at addr ffffffff89dafa58 by task ln/632 [...] [ 106.076026] nvmet: transport type 255 not supported Since commit 200adac75888, NVMF_TRTYPE_MAX is the default state as configured by nvmet_ports_make(). Avoid this by checking for NVMF_TRTYPE_MAX before proceeding.

In the Linux kernel, the following vulnerability has been resolved: arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth() KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth(). Call Trace: [ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550 [ 97.285732] [ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11 [ 97.287032] Hardware name: linux,dummy-virt (DT) [ 97.287815] Call trace: [ 97.288279] dump_backtrace+0xa0/0x128 [ 97.288946] show_stack+0x20/0x38 [ 97.289551] dump_stack_lvl+0x78/0xc8 [ 97.290203] print_address_description.constprop.0+0x84/0x3c8 [ 97.291159] print_report+0xb0/0x280 [ 97.291792] kasan_report+0x84/0xd0 [ 97.292421] __asan_load8+0x9c/0xc0 [ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.293835] process_fetch_insn+0x770/0xa30 [ 97.294562] kprobe_trace_func+0x254/0x3b0 [ 97.295271] kprobe_dispatcher+0x98/0xe0 [ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210 [ 97.296774] call_break_hook+0xc4/0x100 [ 97.297451] brk_handler+0x24/0x78 [ 97.298073] do_debug_exception+0xac/0x178 [ 97.298785] el1_dbg+0x70/0x90 [ 97.299344] el1h_64_sync_handler+0xcc/0xe8 [ 97.300066] el1h_64_sync+0x78/0x80 [ 97.300699] kernel_clone+0x0/0x500 [ 97.301331] __arm64_sys_clone+0x70/0x90 [ 97.302084] invoke_syscall+0x68/0x198 [ 97.302746] el0_svc_common.constprop.0+0x11c/0x150 [ 97.303569] do_el0_svc+0x38/0x50 [ 97.304164] el0_svc+0x44/0x1d8 [ 97.304749] el0t_64_sync_handler+0x100/0x130 [ 97.305500] el0t_64_sync+0x188/0x190 [ 97.306151] [ 97.306475] The buggy address belongs to stack of task 1.sh/2550 [ 97.307461] and is located at offset 0 in frame: [ 97.308257] __se_sys_clone+0x0/0x138 [ 97.308910] [ 97.309241] This frame has 1 object: [ 97.309873] [48, 184) 'args' [ 97.309876] [ 97.310749] The buggy address belongs to the virtual mapping at [ 97.310749] [ffff800089270000, ffff800089279000) created by: [ 97.310749] dup_task_struct+0xc0/0x2e8 [ 97.313347] [ 97.313674] The buggy address belongs to the physical page: [ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a [ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff) [ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000 [ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 97.319445] page dumped because: kasan: bad access detected [ 97.320371] [ 97.320694] Memory state around the buggy address: [ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00 [ 97.325023] ^ [ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This issue seems to be related to the behavior of some gcc compilers and was also fixed on the s390 architecture before: commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()") As described in that commit, regs_get_kernel_stack_nth() has confirmed that `addr` is on the stack, so reading the value at `*addr` should be allowed. Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case. [will: Use '*addr' as the argument to READ_ONCE_NOCHECK()]

In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse() Update struct hid_descriptor to better reflect the mandatory and optional parts of the HID Descriptor as per USB HID 1.11 specification. Note: the kernel currently does not parse any optional HID class descriptors, only the mandatory report descriptor. Update all references to member element desc[0] to rpt_desc. Add test to verify bLength and bNumDescriptors values are valid. Replace the for loop with direct access to the mandatory HID class descriptor member for the report descriptor. This eliminates the possibility of getting an out-of-bounds fault. Add a warning message if the HID descriptor contains any unsupported optional HID class descriptors.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking for bcm_op runtime updates The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via hrtimer. The content and also the length of the sequence can be changed resp reduced at runtime where the 'currframe' counter is then set to zero. Although this appeared to be a safe operation the updates of 'currframe' can be triggered from user space and hrtimer context in bcm_can_tx(). Anderson Nascimento created a proof of concept that triggered a KASAN slab-out-of-bounds read access which can be prevented with a spin_lock_bh. At the rework of bcm_can_tx() the 'count' variable has been moved into the protected section as this variable can be modified from both contexts too.

In the Linux kernel, the following vulnerability has been resolved: md/raid1: Fix stack memory use after return in raid1_reshape In the raid1_reshape function, newpool is allocated on the stack and assigned to conf->r1bio_pool. This results in conf->r1bio_pool.wait.head pointing to a stack address. Accessing this address later can lead to a kernel panic. Example access path: raid1_reshape() { // newpool is on the stack mempool_t newpool, oldpool; // initialize newpool.wait.head to stack address mempool_init(&newpool, ...); conf->r1bio_pool = newpool; } raid1_read_request() or raid1_write_request() { alloc_r1bio() { mempool_alloc() { // if pool->alloc fails remove_element() { --pool->curr_nr; } } } } mempool_free() { if (pool->curr_nr < pool->min_nr) { // pool->wait.head is a stack address // wake_up() will try to access this invalid address // which leads to a kernel panic return; wake_up(&pool->wait); } } Fix: reinit conf->r1bio_pool.wait after assigning newpool.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3() In snd_usb_get_audioformat_uac3(), the length value returned from snd_usb_ctl_msg() is used directly for memory allocation without validation. This length is controlled by the USB device. The allocated buffer is cast to a uac3_cluster_header_descriptor and its fields are accessed without verifying that the buffer is large enough. If the device returns a smaller than expected length, this leads to an out-of-bounds read. Add a length check to ensure the buffer is large enough for uac3_cluster_header_descriptor.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix an out-of-bounds shift when invalidating TLB When the size of the range invalidated is larger than rounddown_pow_of_two(ULONG_MAX), The function macro roundup_pow_of_two(length) will hit an out-of-bounds shift [1]. Use a full TLB invalidation for such cases. v2: - Use a define for the range size limit over which we use a full TLB invalidation. (Lucas) - Use a better calculation of the limit. [1]: [ 39.202421] ------------[ cut here ]------------ [ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 [ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int' [ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10 [ 39.202690] Tainted: [U]=USER [ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 39.202691] Call Trace: [ 39.202692] <TASK> [ 39.202695] dump_stack_lvl+0x6e/0xa0 [ 39.202699] ubsan_epilogue+0x5/0x30 [ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6 [ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe] [ 39.202800] ? find_held_lock+0x2b/0x80 [ 39.202803] ? mark_held_locks+0x40/0x70 [ 39.202806] xe_svm_invalidate+0x459/0x700 [xe] [ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm] [ 39.202900] __mmu_notifier_release+0x1f5/0x270 [ 39.202905] exit_mmap+0x40e/0x450 [ 39.202912] __mmput+0x45/0x110 [ 39.202914] exit_mm+0xc5/0x130 [ 39.202916] do_exit+0x21c/0x500 [ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190 [ 39.202920] do_group_exit+0x36/0xa0 [ 39.202922] get_signal+0x8f8/0x900 [ 39.202926] arch_do_signal_or_restart+0x35/0x100 [ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290 [ 39.202932] do_syscall_64+0xa1/0x180 [ 39.202934] ? do_user_addr_fault+0x59f/0x8a0 [ 39.202937] ? lock_release+0xd2/0x2a0 [ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0 [ 39.202942] ? trace_hardirqs_off+0x4b/0xc0 [ 39.202944] ? clear_bhb_loop+0x25/0x80 [ 39.202946] ? clear_bhb_loop+0x25/0x80 [ 39.202947] ? clear_bhb_loop+0x25/0x80 [ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 39.202952] RIP: 0033:0x7fa945e543e1 [ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7. [ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293 [ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3 [ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff [ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0 [ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 [ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000 [ 39.202970] </TASK> [ 39.202970] ---[ end trace ]--- (cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad)

In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check.

In the Linux kernel, the following vulnerability has been resolved: 9p/net: fix improper handling of bogus negative read/write replies In p9_client_write() and p9_client_read_once(), if the server incorrectly replies with success but a negative write/read count then we would consider written (negative) <= rsize (positive) because both variables were signed. Make variables unsigned to avoid this problem. The reproducer linked below now fails with the following error instead of a null pointer deref: 9pnet: bogus RWRITE count (4294967295 > 3)

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() syzbot reports an UBSAN issue as below: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in fs/f2fs/node.h:381:10 index 18446744073709550692 is out of range for type '__le32[5]' (aka 'unsigned int[5]') CPU: 0 UID: 0 PID: 5318 Comm: syz.0.0 Not tainted 6.14.0-rc3-syzkaller-00060-g6537cfb395f3 #0 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429 get_nid fs/f2fs/node.h:381 [inline] f2fs_truncate_inode_blocks+0xa5e/0xf60 fs/f2fs/node.c:1181 f2fs_do_truncate_blocks+0x782/0x1030 fs/f2fs/file.c:808 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:836 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:886 f2fs_file_write_iter+0x1bdb/0x2550 fs/f2fs/file.c:5093 aio_write+0x56b/0x7c0 fs/aio.c:1633 io_submit_one+0x8a7/0x18a0 fs/aio.c:2052 __do_sys_io_submit fs/aio.c:2111 [inline] __se_sys_io_submit+0x171/0x2e0 fs/aio.c:2081 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f238798cde9 index 18446744073709550692 (decimal, unsigned long long) = 0xfffffffffffffc64 (hexadecimal, unsigned long long) = -924 (decimal, long long) In f2fs_truncate_inode_blocks(), UBSAN detects that get_nid() tries to access .i_nid[-924], it means both offset[0] and level should zero. The possible case should be in f2fs_do_truncate_blocks(), we try to truncate inode size to zero, however, dn.ofs_in_node is zero and dn.node_page is not an inode page, so it fails to truncate inode page, and then pass zeroed free_from to f2fs_truncate_inode_blocks(), result in this issue. if (dn.ofs_in_node || IS_INODE(dn.node_page)) { f2fs_truncate_data_blocks_range(&dn, count); free_from += count; } I guess the reason why dn.node_page is not an inode page could be: there are multiple nat entries share the same node block address, once the node block address was reused, f2fs_get_node_page() may load a non-inode block. Let's add a sanity check for such condition to avoid out-of-bounds access issue.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix out of bounds punch offset Punching a hole with a start offset that exceeds max_end is not permitted and will result in a negative length in the truncate_inode_partial_folio() function while truncating the page cache, potentially leading to undesirable consequences. A simple reproducer: truncate -s 9895604649994 /mnt/foo xfs_io -c "pwrite 8796093022208 4096" /mnt/foo xfs_io -c "fpunch 8796093022213 25769803777" /mnt/foo kernel BUG at include/linux/highmem.h:275! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 710 Comm: xfs_io Not tainted 6.15.0-rc3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:zero_user_segments.constprop.0+0xd7/0x110 RSP: 0018:ffffc90001cf3b38 EFLAGS: 00010287 RAX: 0000000000000005 RBX: ffffea0001485e40 RCX: 0000000000001000 RDX: 000000000040b000 RSI: 0000000000000005 RDI: 000000000040b000 RBP: 000000000040affb R08: ffff888000000000 R09: ffffea0000000000 R10: 0000000000000003 R11: 00000000fffc7fc5 R12: 0000000000000005 R13: 000000000040affb R14: ffffea0001485e40 R15: ffff888031cd3000 FS: 00007f4f63d0b780(0000) GS:ffff8880d337d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000001ae0b038 CR3: 00000000536aa000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> truncate_inode_partial_folio+0x3dd/0x620 truncate_inode_pages_range+0x226/0x720 ? bdev_getblk+0x52/0x3e0 ? ext4_get_group_desc+0x78/0x150 ? crc32c_arch+0xfd/0x180 ? __ext4_get_inode_loc+0x18c/0x840 ? ext4_inode_csum+0x117/0x160 ? jbd2_journal_dirty_metadata+0x61/0x390 ? __ext4_handle_dirty_metadata+0xa0/0x2b0 ? kmem_cache_free+0x90/0x5a0 ? jbd2_journal_stop+0x1d5/0x550 ? __ext4_journal_stop+0x49/0x100 truncate_pagecache_range+0x50/0x80 ext4_truncate_page_cache_block_range+0x57/0x3a0 ext4_punch_hole+0x1fe/0x670 ext4_fallocate+0x792/0x17d0 ? __count_memcg_events+0x175/0x2a0 vfs_fallocate+0x121/0x560 ksys_fallocate+0x51/0xc0 __x64_sys_fallocate+0x24/0x40 x64_sys_call+0x18d2/0x4170 do_syscall_64+0xa7/0x220 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by filtering out cases where the punching start offset exceeds max_end.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: do not index invalid pin_assignments A poorly implemented DisplayPort Alt Mode port partner can indicate that its pin assignment capabilities are greater than the maximum value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show will cause a BRK exception due to an out of bounds array access. Prevent for loop in pin_assignment_show from accessing invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop condition.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix out-of-bound memcpy() during ethtool -w When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock() Function ubifs_wbuf_write_nolock() may access buf out of bounds in following process: ubifs_wbuf_write_nolock(): aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096 if (aligned_len <= wbuf->avail) ... // Not satisfy if (wbuf->used) { ubifs_leb_write() // Fill some data in avail wbuf len -= wbuf->avail; // len is still not 8-bytes aligned aligned_len -= wbuf->avail; } n = aligned_len >> c->max_write_shift; if (n) { n <<= c->max_write_shift; err = ubifs_leb_write(c, wbuf->lnum, buf + written, wbuf->offs, n); // n > len, read out of bounds less than 8(n-len) bytes } , which can be catched by KASAN: ========================================================= BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0 Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128 Workqueue: writeback wb_workfn (flush-ubifs_0_0) Call Trace: kasan_report.cold+0x81/0x165 nand_write_page_swecc+0xa9/0x160 ubifs_leb_write+0xf2/0x1b0 [ubifs] ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs] write_head+0xdc/0x1c0 [ubifs] ubifs_jnl_write_inode+0x627/0x960 [ubifs] wb_workfn+0x8af/0xb80 Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8 bytes aligned, the 'len' represents the true length of buf (which is allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully to write leb safely. Fetch a reproducer in [Link].

In the Linux kernel through 6.2.8, net/bluetooth/hci_sync.c allows out-of-bounds access because amp_init1[] and amp_init2[] are supposed to have an intentionally invalid element, but do not.

A flaw was found in the Linux kernel's implementation of string matching within a packet. A privileged user (with root or CAP_NET_ADMIN) when inserting iptables rules could insert a rule which can panic the system. Kernel before kernel 5.5-rc1 is affected.

An out-of-bounds read vulnerability was found in the SR-IPv6 implementation in the Linux kernel. The flaw exists within the processing of seg6 attributes. The issue results from the improper validation of user-supplied data, which can result in a read past the end of an allocated buffer. This flaw allows a privileged local user to disclose sensitive information on affected installations of the Linux kernel.

In the Linux kernel 5.5.0 and newer, the bpf verifier (kernel/bpf/verifier.c) did not properly restrict the register bounds for 32-bit operations, leading to out-of-bounds reads and writes in kernel memory. The vulnerability also affects the Linux 5.4 stable series, starting with v5.4.7, as the introducing commit was backported to that branch. This vulnerability was fixed in 5.6.1, 5.5.14, and 5.4.29. (issue is aka ZDI-CAN-10780)

An out-of-bounds read in V8 in Google Chrome prior to 57.0.2987.133 for Linux, Windows, and Mac, and 57.0.2987.132 for Android, allowed a remote attacker to obtain heap memory contents via a crafted HTML page.

In the Linux kernel, the following vulnerability has been resolved: net_sched: keep alloc_hash updated after hash allocation In commit 599be01ee567 ("net_sched: fix an OOB access in cls_tcindex") I moved cp->hash calculation before the first tcindex_alloc_perfect_hash(), but cp->alloc_hash is left untouched. This difference could lead to another out of bound access. cp->alloc_hash should always be the size allocated, we should update it after this tcindex_alloc_perfect_hash().

Leptonica before 1.80.0 allows a heap-based buffer over-read in rasteropGeneralLow, related to adaptmap_reg.c and adaptmap.c.

An issue was discovered in the Linux kernel before 5.8.1. net/bluetooth/hci_event.c has a slab out-of-bounds read in hci_extended_inquiry_result_evt, aka CID-51c19bf3d5cf.

An out-of-bounds (OOB) memory access flaw was found in x25_bind in net/x25/af_x25.c in the Linux kernel version v5.12-rc5. A bounds check failure allows a local attacker with a user account on the system to gain access to out-of-bounds memory, leading to a system crash or a leak of internal kernel information. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

A slab-out-of-bounds read in fbcon in the Linux kernel before 5.9.7 could be used by local attackers to read privileged information or potentially crash the kernel, aka CID-3c4e0dff2095. This occurs because KD_FONT_OP_COPY in drivers/tty/vt/vt.c can be used for manipulations such as font height.

In imgsys_cmdq, there is a possible out of bounds read due to a missing valid range checking. This could lead to local information disclosure with System execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS07354023; Issue ID: ALPS07340098.

In imgsys_cmdq, there is a possible out of bounds read due to a missing valid range checking. This could lead to local escalation of privilege with System execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS07340433; Issue ID: ALPS07340433.

An out-of-bounds (OOB) memory read flaw was found in parse_lease_state in the KSMBD implementation of the in-kernel samba server and CIFS in the Linux kernel. When an attacker sends the CREATE command with a malformed payload to KSMBD, due to a missing check of `NameOffset` in the `parse_lease_state()` function, the `create_context` object can access invalid memory.

In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Fix out-of-bounds access Clip memory range to screen-buffer size to avoid out-of-bounds access in fbdev deferred I/O's damage handling. Fbdev's deferred I/O can only track pages. From the range of pages, the damage handler computes the clipping rectangle for the display update. If the fbdev screen buffer ends near the beginning of a page, that page could contain more scanlines. The damage handler would then track these non-existing scanlines as dirty and provoke an out-of-bounds access during the screen update. Hence, clip the maximum memory range to the size of the screen buffer. While at it, rename the variables min/max to min_off/max_off in drm_fb_helper_deferred_io(). This avoids confusion with the macros of the same name.

In the Linux kernel, the following vulnerability has been resolved: selinux: Add boundary check in put_entry() Just like next_entry(), boundary check is necessary to prevent memory out-of-bound access.

In the Linux kernel, the following vulnerability has been resolved: i2c: ismt: Fix an out-of-bounds bug in ismt_access() When the driver does not check the data from the user, the variable 'data->block[0]' may be very large to cause an out-of-bounds bug. The following log can reveal it: [ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20 [ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE [ 33.996475] ================================================================== [ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b [ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485 [ 33.999450] Call Trace: [ 34.001849] memcpy+0x20/0x60 [ 34.002077] ismt_access.cold+0x374/0x214b [ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0 [ 34.004007] i2c_smbus_xfer+0x10a/0x390 [ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710 [ 34.005196] i2cdev_ioctl+0x5ec/0x74c Fix this bug by checking the size of 'data->block[0]' first.

In the Linux kernel, the following vulnerability has been resolved: s390/cio: fix out-of-bounds access on cio_ignore free The channel-subsystem-driver scans for newly available devices whenever device-IDs are removed from the cio_ignore list using a command such as: echo free >/proc/cio_ignore Since an I/O device scan might interfer with running I/Os, commit 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") introduced an optimization to exclude online devices from the scan. The newly added check for online devices incorrectly assumes that an I/O-subchannel's drvdata points to a struct io_subchannel_private. For devices that are bound to a non-default I/O subchannel driver, such as the vfio_ccw driver, this results in an out-of-bounds read access during each scan. Fix this by changing the scan logic to rely on a driver-independent online indication. For this we can use struct subchannel->config.ena, which is the driver's requested subchannel-enabled state. Since I/Os can only be started on enabled subchannels, this matches the intent of the original optimization of not scanning devices where I/O might be running.

In nDPI through 3.2, the Oracle protocol dissector has a heap-based buffer over-read in ndpi_search_oracle in lib/protocols/oracle.c.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix reading strings from synthetic events The follow commands caused a crash: # cd /sys/kernel/tracing # echo 's:open char file[]' > dynamic_events # echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger' # echo 1 > events/synthetic/open/enable BOOM! The problem is that the synthetic event field "char file[]" will read the value given to it as a string without any memory checks to make sure the address is valid. The above example will pass in the user space address and the sythetic event code will happily call strlen() on it and then strscpy() where either one will cause an oops when accessing user space addresses. Use the helper functions from trace_kprobe and trace_eprobe that can read strings safely (and actually succeed when the address is from user space and the memory is mapped in). Now the above can show: packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Align upwards buffer size The hardware can support any image size WxH, with arbitrary W (image width) and H (image height) dimensions. Align upwards buffer size for both encoder and decoder. and leave the picture resolution unchanged. For decoder, the risk of memory out of bounds can be avoided. For both encoder and decoder, the driver will lift the limitation of resolution alignment. For example, the decoder can support jpeg whose resolution is 227x149 the encoder can support nv12 1080P, won't change it to 1920x1072.

In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue When value < time_unit, the parameter of ilog2() will be zero and the return value is -1. u64(-1) is too large for shift exponent and then will trigger shift-out-of-bounds: shift exponent 18446744073709551615 is too large for 32-bit type 'int' Call Trace: rapl_compute_time_window_core rapl_write_data_raw set_time_window store_constraint_time_window_us

A memory out-of-bounds read flaw was found in the Linux kernel before 5.9-rc2 with the ext3/ext4 file system, in the way it accesses a directory with broken indexing. This flaw allows a local user to crash the system if the directory exists. The highest threat from this vulnerability is to system availability.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive/spapr: correct bitmap allocation size kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency.

In the Linux kernel, the following vulnerability has been resolved: drm/dp: Fix OOB read when handling Post Cursor2 register The link_status array was not large enough to read the Adjust Request Post Cursor2 register, so remove the common helper function to avoid an OOB read, found with a -Warray-bounds build: drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor': drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds] 59 | return link_status[r - DP_LANE0_1_STATUS]; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status' 147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE], | ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Replace the only user of the helper with an open-coded fetch and decode, similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c.

In the Linux kernel, the following vulnerability has been resolved: module: fix [e_shstrndx].sh_size=0 OOB access It is trivial to craft a module to trigger OOB access in this line: if (info->secstrings[strhdr->sh_size - 1] != '\0') { BUG: unable to handle page fault for address: ffffc90000aa0fff PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:load_module+0x19b/0x2391 [rebased patch onto modules-next]

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type. Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes. Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data. In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end. In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null.

In the Linux kernel, the following vulnerability has been resolved: dm raid: fix accesses beyond end of raid member array On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled).

In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix array out of bounds access The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end t ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wc938x: fix accessing array out of bounds for enum type Accessing enums using integer would result in array out of bounds access on platforms like aarch64 where sizeof(long) is 8 compared to enum size which is 4 bytes. Fix this by using enumerated items instead of integers.