In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a double-free in si_dpm_init When the allocation of adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails, amdgpu_free_extended_power_table is called to free some fields of adev. However, when the control flow returns to si_dpm_sw_init, it goes to label dpm_failed and calls si_dpm_fini, which calls amdgpu_free_extended_power_table again and free those fields again. Thus a double-free is triggered.

In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers These three bpf_map_{lookup,update,delete}_elem() helpers are also available for sleepable bpf program, so add the corresponding lock assertion for sleepable bpf program, otherwise the following warning will be reported when a sleepable bpf program manipulates bpf map under interpreter mode (aka bpf_jit_enable=0): WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ...... CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:bpf_map_lookup_elem+0x54/0x60 ...... Call Trace: <TASK> ? __warn+0xa5/0x240 ? bpf_map_lookup_elem+0x54/0x60 ? report_bug+0x1ba/0x1f0 ? handle_bug+0x40/0x80 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1b/0x20 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ? rcu_lockdep_current_cpu_online+0x65/0xb0 ? rcu_is_watching+0x23/0x50 ? bpf_map_lookup_elem+0x54/0x60 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ___bpf_prog_run+0x513/0x3b70 __bpf_prog_run32+0x9d/0xd0 ? __bpf_prog_enter_sleepable_recur+0xad/0x120 ? __bpf_prog_enter_sleepable_recur+0x3e/0x120 bpf_trampoline_6442580665+0x4d/0x1000 __x64_sys_getpgid+0x5/0x30 ? do_syscall_64+0x36/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: nfc: llcp: Add lock when modifying device list The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix io_req_prep_async with provided buffers io_req_prep_async() can import provided buffers, commit the ring state by giving up on that before, it'll be reimported later if needed.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix a memory corruption issue A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct ieee80211_channel'. So only 1 element is allocated in this array. When doing: mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the 'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void *)((u8 *)mvm->nvm_data->channels + 1); because of the "(u8 *)" cast, we add only 1 to the address of the beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just after. Remove the spurious casting so that the pointer arithmetic works as expected.

In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control(). syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in:

In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in shinker's callback The mmap read lock is used during the shrinker's callback, which means that using alloc->vma pointer isn't safe as it can race with munmap(). As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") the mmap lock is downgraded after the vma has been isolated. I was able to reproduce this issue by manually adding some delays and triggering page reclaiming through the shrinker's debug sysfs. The following KASAN report confirms the UAF: ================================================================== BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8 Read of size 8 at addr ffff356ed50e50f0 by task bash/478 CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70 Hardware name: linux,dummy-virt (DT) Call trace: zap_page_range_single+0x470/0x4b8 binder_alloc_free_page+0x608/0xadc __list_lru_walk_one+0x130/0x3b0 list_lru_walk_node+0xc4/0x22c binder_shrink_scan+0x108/0x1dc shrinker_debugfs_scan_write+0x2b4/0x500 full_proxy_write+0xd4/0x140 vfs_write+0x1ac/0x758 ksys_write+0xf0/0x1dc __arm64_sys_write+0x6c/0x9c Allocated by task 492: kmem_cache_alloc+0x130/0x368 vm_area_alloc+0x2c/0x190 mmap_region+0x258/0x18bc do_mmap+0x694/0xa60 vm_mmap_pgoff+0x170/0x29c ksys_mmap_pgoff+0x290/0x3a0 __arm64_sys_mmap+0xcc/0x144 Freed by task 491: kmem_cache_free+0x17c/0x3c8 vm_area_free_rcu_cb+0x74/0x98 rcu_core+0xa38/0x26d4 rcu_core_si+0x10/0x1c __do_softirq+0x2fc/0xd24 Last potentially related work creation: __call_rcu_common.constprop.0+0x6c/0xba0 call_rcu+0x10/0x1c vm_area_free+0x18/0x24 remove_vma+0xe4/0x118 do_vmi_align_munmap.isra.0+0x718/0xb5c do_vmi_munmap+0xdc/0x1fc __vm_munmap+0x10c/0x278 __arm64_sys_munmap+0x58/0x7c Fix this issue by performing instead a vma_lookup() which will fail to find the vma that was isolated before the mmap lock downgrade. Note that this option has better performance than upgrading to a mmap write lock which would increase contention. Plus, mmap_write_trylock() has been recently removed anyway.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix potential key use-after-free When ieee80211_key_link() is called by ieee80211_gtk_rekey_add() but returns 0 due to KRACK protection (identical key reinstall), ieee80211_gtk_rekey_add() will still return a pointer into the key, in a potential use-after-free. This normally doesn't happen since it's only called by iwlwifi in case of WoWLAN rekey offload which has its own KRACK protection, but still better to fix, do that by returning an error code and converting that to success on the cfg80211 boundary only, leaving the error for bad callers of ieee80211_gtk_rekey_add().

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a Here are the specific bugs: 1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec->iov.iov_len and are thus not intended to be in the packet. 2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request->iovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages. This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request. Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well. Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit: 1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings. 2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node. If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail. The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between (2) and (3). 3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler->lock and checks mmu_rb_node->refcount before mmu_rb_node->refcount is incremented. 4. Related to #2 above, SDMA request submission failure path does not check mmu_rb_node->refcount before freeing mmu_rb_node object. If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in smb2_query_info_compound() The following UAF was triggered when running fstests generic/072 with KASAN enabled against Windows Server 2022 and mount options 'multichannel,max_channels=2,vers=3.1.1,mfsymlinks,noperm' BUG: KASAN: slab-use-after-free in smb2_query_info_compound+0x423/0x6d0 [cifs] Read of size 8 at addr ffff888014941048 by task xfs_io/27534 CPU: 0 PID: 27534 Comm: xfs_io Not tainted 6.6.0-rc7 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0x7f ? srso_alias_return_thunk+0x5/0x7f ? __phys_addr+0x46/0x90 kasan_report+0xda/0x110 ? smb2_query_info_compound+0x423/0x6d0 [cifs] ? smb2_query_info_compound+0x423/0x6d0 [cifs] smb2_query_info_compound+0x423/0x6d0 [cifs] ? __pfx_smb2_query_info_compound+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0x7f ? __stack_depot_save+0x39/0x480 ? kasan_save_stack+0x33/0x60 ? kasan_set_track+0x25/0x30 ? ____kasan_slab_free+0x126/0x170 smb2_queryfs+0xc2/0x2c0 [cifs] ? __pfx_smb2_queryfs+0x10/0x10 [cifs] ? __pfx___lock_acquire+0x10/0x10 smb311_queryfs+0x210/0x220 [cifs] ? __pfx_smb311_queryfs+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0x7f ? __lock_acquire+0x480/0x26c0 ? lock_release+0x1ed/0x640 ? srso_alias_return_thunk+0x5/0x7f ? do_raw_spin_unlock+0x9b/0x100 cifs_statfs+0x18c/0x4b0 [cifs] statfs_by_dentry+0x9b/0xf0 fd_statfs+0x4e/0xb0 __do_sys_fstatfs+0x7f/0xe0 ? __pfx___do_sys_fstatfs+0x10/0x10 ? srso_alias_return_thunk+0x5/0x7f ? lockdep_hardirqs_on_prepare+0x136/0x200 ? srso_alias_return_thunk+0x5/0x7f do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 27534: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x8f/0xa0 open_cached_dir+0x71b/0x1240 [cifs] smb2_query_info_compound+0x5c3/0x6d0 [cifs] smb2_queryfs+0xc2/0x2c0 [cifs] smb311_queryfs+0x210/0x220 [cifs] cifs_statfs+0x18c/0x4b0 [cifs] statfs_by_dentry+0x9b/0xf0 fd_statfs+0x4e/0xb0 __do_sys_fstatfs+0x7f/0xe0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 27534: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x50 ____kasan_slab_free+0x126/0x170 slab_free_freelist_hook+0xd0/0x1e0 __kmem_cache_free+0x9d/0x1b0 open_cached_dir+0xff5/0x1240 [cifs] smb2_query_info_compound+0x5c3/0x6d0 [cifs] smb2_queryfs+0xc2/0x2c0 [cifs] This is a race between open_cached_dir() and cached_dir_lease_break() where the cache entry for the open directory handle receives a lease break while creating it. And before returning from open_cached_dir(), we put the last reference of the new @cfid because of !@cfid->has_lease. Besides the UAF, while running xfstests a lot of missed lease breaks have been noticed in tests that run several concurrent statfs(2) calls on those cached fids CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame... CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1... CIFS: VFS: \\w22-root1.gandalf.test smb buf 00000000715bfe83 len 108 CIFS: VFS: Dump pending requests: CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame... CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1... CIFS: VFS: \\w22-root1.gandalf.test smb buf 000000005aa7316e len 108 ... To fix both, in open_cached_dir() ensure that @cfid->has_lease is set right before sending out compounded request so that any potential lease break will be get processed by demultiplex thread while we're still caching @cfid. And, if open failed for some reason, re-check @cfid->has_lease to decide whether or not put lease reference.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again.

In the Linux kernel, the following vulnerability has been resolved: class: fix use-after-free in class_register() The lock_class_key is still registered and can be found in lock_keys_hash hlist after subsys_private is freed in error handler path.A task who iterate over the lock_keys_hash later may cause use-after-free.So fix that up and unregister the lock_class_key before kfree(cp). On our platform, a driver fails to kset_register because of creating duplicate filename '/class/xxx'.With Kasan enabled, it prints a invalid-access bug report. KASAN bug report: BUG: KASAN: invalid-access in lockdep_register_key+0x19c/0x1bc Write of size 8 at addr 15ffff808b8c0368 by task modprobe/252 Pointer tag: [15], memory tag: [fe] CPU: 7 PID: 252 Comm: modprobe Tainted: G W 6.6.0-mainline-maybe-dirty #1 Call trace: dump_backtrace+0x1b0/0x1e4 show_stack+0x2c/0x40 dump_stack_lvl+0xac/0xe0 print_report+0x18c/0x4d8 kasan_report+0xe8/0x148 __hwasan_store8_noabort+0x88/0x98 lockdep_register_key+0x19c/0x1bc class_register+0x94/0x1ec init_module+0xbc/0xf48 [rfkill] do_one_initcall+0x17c/0x72c do_init_module+0x19c/0x3f8 ... Memory state around the buggy address: ffffff808b8c0100: 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a 8a ffffff808b8c0200: 8a 8a 8a 8a 8a 8a 8a 8a fe fe fe fe fe fe fe fe >ffffff808b8c0300: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe ^ ffffff808b8c0400: 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 As CONFIG_KASAN_GENERIC is not set, Kasan reports invalid-access not use-after-free here.In this case, modprobe is manipulating the corrupted lock_keys_hash hlish where lock_class_key is already freed before. It's worth noting that this only can happen if lockdep is enabled, which is not true for normal system.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix UAF in cifs_demultiplex_thread() There is a UAF when xfstests on cifs: BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160 Read of size 4 at addr ffff88810103fc08 by task cifsd/923 CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45 ... Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 kasan_check_range+0x145/0x1a0 smb2_is_network_name_deleted+0x27/0x160 cifs_demultiplex_thread.cold+0x172/0x5a4 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 923: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x147/0x320 mempool_alloc+0xe1/0x260 cifs_small_buf_get+0x24/0x60 allocate_buffers+0xa1/0x1c0 cifs_demultiplex_thread+0x199/0x10d0 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 Freed by task 921: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 kmem_cache_free+0xe3/0x4d0 cifs_small_buf_release+0x29/0x90 SMB2_negotiate+0x8b7/0x1c60 smb2_negotiate+0x51/0x70 cifs_negotiate_protocol+0xf0/0x160 cifs_get_smb_ses+0x5fa/0x13c0 mount_get_conns+0x7a/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The UAF is because: mount(pid: 921) | cifsd(pid: 923) -------------------------------|------------------------------- | cifs_demultiplex_thread SMB2_negotiate | cifs_send_recv | compound_send_recv | smb_send_rqst | wait_for_response | wait_event_state [1] | | standard_receive3 | cifs_handle_standard | handle_mid | mid->resp_buf = buf; [2] | dequeue_mid [3] KILL the process [4] | resp_iov[i].iov_base = buf | free_rsp_buf [5] | | is_network_name_deleted [6] | callback 1. After send request to server, wait the response until mid->mid_state != SUBMITTED; 2. Receive response from server, and set it to mid; 3. Set the mid state to RECEIVED; 4. Kill the process, the mid state already RECEIVED, get 0; 5. Handle and release the negotiate response; 6. UAF. It can be easily reproduce with add some delay in [3] - [6]. Only sync call has the problem since async call's callback is executed in cifsd process. Add an extra state to mark the mid state to READY before wakeup the waitter, then it can get the resp safely.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Make cake_enqueue return NET_XMIT_CN when past buffer_limit The following setup can trigger a WARNING in htb_activate due to the condition: !cl->leaf.q->q.qlen tc qdisc del dev lo root tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 \ htb rate 64bit tc qdisc add dev lo parent 1:1 handle f: \ cake memlimit 1b ping -I lo -f -c1 -s64 -W0.001 127.0.0.1 This is because the low memlimit leads to a low buffer_limit, which causes packet dropping. However, cake_enqueue still returns NET_XMIT_SUCCESS, causing htb_enqueue to call htb_activate with an empty child qdisc. We should return NET_XMIT_CN when packets are dropped from the same tin and flow. I do not believe return value of NET_XMIT_CN is necessary for packet drops in the case of ack filtering, as that is meant to optimize performance, not to signal congestion.

In the Linux kernel, the following vulnerability has been resolved: jfs: upper bound check of tree index in dbAllocAG When computing the tree index in dbAllocAG, we never check if we are out of bounds realative to the size of the stree. This could happen in a scenario where the filesystem metadata are corrupted.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Prevent recovery work from being queued during device removal Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini() to ensure that no new recovery work items can be queued after device removal has started. Previously, recovery work could be scheduled even after canceling existing work, potentially leading to use-after-free bugs if recovery accessed freed resources. Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better reflect its new behavior.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Avoid stack buffer overflow from kernel cmdline While the kernel command line is considered trusted in most environments, avoid writing 1 byte past the end of "acpiid" if the "str" argument is maximum length.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix double free in idxd_setup_wqs() The clean up in idxd_setup_wqs() has had a couple bugs because the error handling is a bit subtle. It's simpler to just re-write it in a cleaner way. The issues here are: 1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when "conf_dev" hasn't been initialized. 2) If kzalloc_node() fails then again "conf_dev" is invalid. It's either uninitialized or it points to the "conf_dev" from the previous iteration so it leads to a double free. It's better to free partial loop iterations within the loop and then the unwinding at the end can handle whole loop iterations. I also renamed the labels to describe what the goto does and not where the goto was located.

In the Linux kernel, the following vulnerability has been resolved: media: rc: bpf attach/detach requires write permission Note that bpf attach/detach also requires CAP_NET_ADMIN.

In the Linux kernel, the following vulnerability has been resolved: fuse: Block access to folio overlimit syz reported a slab-out-of-bounds Write in fuse_dev_do_write. When the number of bytes to be retrieved is truncated to the upper limit by fc->max_pages and there is an offset, the oob is triggered. Add a loop termination condition to prevent overruns.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when releasing mids All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock*

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a potential double-free in fs_any_create_groups When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups().

In the Linux kernel, the following vulnerability has been resolved: fbdev: fix potential buffer overflow in do_register_framebuffer() The current implementation may lead to buffer overflow when: 1. Unregistration creates NULL gaps in registered_fb[] 2. All array slots become occupied despite num_registered_fb < FB_MAX 3. The registration loop exceeds array bounds Add boundary check to prevent registered_fb[FB_MAX] access.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Validate the size of the received input buffer Add buffer_recv_size to store the size of the received bytes. Validate buffer_recv_size in send_usb_cmd().

In the Linux kernel, the following vulnerability has been resolved: of: Fix double free in of_parse_phandle_with_args_map In of_parse_phandle_with_args_map() the inner loop that iterates through the map entries calls of_node_put(new) to free the reference acquired by the previous iteration of the inner loop. This assumes that the value of "new" is NULL on the first iteration of the inner loop. Make sure that this is true in all iterations of the outer loop by setting "new" to NULL after its value is assigned to "cur". Extend the unittest to detect the double free and add an additional test case that actually triggers this path.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix use-after-free in state_show() state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock. This allows a use-after-free race: CPU 0 CPU 1 ----- ----- state_show() damon_sysfs_turn_damon_on() ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock); damon_destroy_ctx(kdamond->damon_ctx); kdamond->damon_ctx = NULL; mutex_unlock(&damon_sysfs_lock); damon_is_running(ctx); /* ctx is freed */ mutex_lock(&ctx->kdamond_lock); /* UAF */ (The race can also occur with damon_sysfs_kdamonds_rm_dirs() and damon_sysfs_kdamond_release(), which free or replace the context under damon_sysfs_lock.) Fix by taking damon_sysfs_lock before dereferencing the context, mirroring the locking used in pid_show(). The bug has existed since state_show() first accessed kdamond->damon_ctx.

In the Linux kernel, the following vulnerability has been resolved: media: ivsc: Fix crash at shutdown due to missing mei_cldev_disable() calls Both the ACE and CSI driver are missing a mei_cldev_disable() call in their remove() function. This causes the mei_cl client to stay part of the mei_device->file_list list even though its memory is freed by mei_cl_bus_dev_release() calling kfree(cldev->cl). This leads to a use-after-free when mei_vsc_remove() runs mei_stop() which first removes all mei bus devices calling mei_ace_remove() and mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing the just freed cldev->cl. And mei_vsc_remove() it self is run at shutdown because of the platform_device_unregister(tp->pdev) in vsc_tp_shutdown() When building a kernel with KASAN this leads to the following KASAN report: [ 106.634504] ================================================================== [ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1 [ 106.634729] [ 106.634767] Tainted: [E]=UNSIGNED_MODULE [ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025 [ 106.634773] Call Trace: [ 106.634777] <TASK> ... [ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) [ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei [ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei ... [ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei [ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc [ 106.635066] platform_remove (drivers/base/platform.c:1424) Add the missing mei_cldev_disable() calls so that the mei_cl gets removed from mei_device->file_list before it is freed to fix this.

In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix UAF via HID_CLAIMED_INPUT validation After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfre ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with iio_for_each_active_channel()) without making sure the indio_dev stays in buffer mode. There is a race if indio_dev exits buffer mode in the middle of the interrupt that flushes the fifo. Fix this by calling synchronize_irq() to ensure that no interrupt is currently running when disabling buffer mode. Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [...] _find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290 fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178 fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c irq_thread_fn from irq_thread+0x110/0x1f4 irq_thread from kthread+0xe0/0xfc kthread from ret_from_fork+0x14/0x2c

In the Linux kernel, the following vulnerability has been resolved: reiserfs: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change reiserfs rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start() Preserve the error code if iwl_setup_deferred_work() fails. The current code returns ERR_PTR(0) (which is NULL) on this path. I believe the missing error code potentially leads to a use after free involving debugfs.

In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Fix memory corruption when using identity domain zpci_get_iommu_ctrs() returns counter information to be reported as part of device statistics; these counters are stored as part of the s390_domain. The problem, however, is that the identity domain is not backed by an s390_domain and so the conversion via to_s390_domain() yields a bad address that is zero'd initially and read on-demand later via a sysfs read. These counters aren't necessary for the identity domain; just return NULL in this case. This issue was discovered via KASAN with reports that look like: BUG: KASAN: global-out-of-bounds in zpci_fmb_enable_device when using the identity domain for a device on s390.

In the Linux kernel, the following vulnerability has been resolved: mptcp: plug races between subflow fail and subflow creation We have races similar to the one addressed by the previous patch between subflow failing and additional subflow creation. They are just harder to trigger. The solution is similar. Use a separate flag to track the condition 'socket state prevent any additional subflow creation' protected by the fallback lock. The socket fallback makes such flag true, and also receiving or sending an MP_FAIL option. The field 'allow_infinite_fallback' is now always touched under the relevant lock, we can drop the ONCE annotation on write.

In the Linux kernel, the following vulnerability has been resolved: libceph: fix invalid accesses to ceph_connection_v1_info There is a place where generic code in messenger.c is reading and another place where it is writing to con->v1 union member without checking that the union member is active (i.e. msgr1 is in use). On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter, so such a read is almost guaranteed to return a bogus value instead of 0 when msgr2 is in use. This ends up being fairly benign because the side effect is just the invalidation of the authorizer and successive fetching of new tickets. con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that it's being written to can cause more serious consequences, but luckily it's not something that happens often.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv Given mt8365_dai_set_priv allocate priv_size space to copy priv_data which means we should pass mt8365_i2s_priv[i] or "struct mtk_afe_i2s_priv" instead of afe_priv which has the size of "struct mt8365_afe_private". Otherwise the KASAN complains about. [ 59.389765] BUG: KASAN: global-out-of-bounds in mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm] ... [ 59.394789] Call trace: [ 59.395167] dump_backtrace+0xa0/0x128 [ 59.395733] show_stack+0x20/0x38 [ 59.396238] dump_stack_lvl+0xe8/0x148 [ 59.396806] print_report+0x37c/0x5e0 [ 59.397358] kasan_report+0xac/0xf8 [ 59.397885] kasan_check_range+0xe8/0x190 [ 59.398485] asan_memcpy+0x3c/0x98 [ 59.399022] mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm] [ 59.399928] mt8365_dai_i2s_register+0x1e8/0x2b0 [snd_soc_mt8365_pcm] [ 59.400893] mt8365_afe_pcm_dev_probe+0x4d0/0xdf0 [snd_soc_mt8365_pcm] [ 59.401873] platform_probe+0xcc/0x228 [ 59.402442] really_probe+0x340/0x9e8 [ 59.402992] driver_probe_device+0x16c/0x3f8 [ 59.403638] driver_probe_device+0x64/0x1d8 [ 59.404256] driver_attach+0x1dc/0x4c8 [ 59.404840] bus_for_each_dev+0x100/0x190 [ 59.405442] driver_attach+0x44/0x68 [ 59.405980] bus_add_driver+0x23c/0x500 [ 59.406550] driver_register+0xf8/0x3d0 [ 59.407122] platform_driver_register+0x68/0x98 [ 59.407810] mt8365_afe_pcm_driver_init+0x2c/0xff8 [snd_soc_mt8365_pcm]

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org

In the Linux kernel, the following vulnerability has been resolved: dm-bufio: don't schedule in atomic context A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and try_verify_in_tasklet are enabled. [ 129.444685][ T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421 [ 129.444723][ T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4 [ 129.444740][ T934] preempt_count: 201, expected: 0 [ 129.444756][ T934] RCU nest depth: 0, expected: 0 [ 129.444781][ T934] Preemption disabled at: [ 129.444789][ T934] [<ffffffd816231900>] shrink_work+0x21c/0x248 [ 129.445167][ T934] kernel BUG at kernel/sched/walt/walt_debug.c:16! [ 129.445183][ T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ 129.445204][ T934] Skip md ftrace buffer dump for: 0x1609e0 [ 129.447348][ T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G W OE 6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8 [ 129.447362][ T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT) [ 129.447373][ T934] Workqueue: dm_bufio_cache shrink_work [ 129.447394][ T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 129.447406][ T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug] [ 129.447435][ T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c [ 129.447451][ T934] sp : ffffffc0843dbc90 [ 129.447459][ T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b [ 129.447479][ T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68 [ 129.447497][ T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900 [ 129.447517][ T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030 [ 129.447535][ T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358 [ 129.447554][ T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003 [ 129.447572][ T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400 [ 129.447591][ T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8 [ 129.447610][ T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0 [ 129.447629][ T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000 [ 129.447647][ T934] Call trace: [ 129.447655][ T934] android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6] [ 129.447681][ T934] __might_resched+0x190/0x1a8 [ 129.447694][ T934] shrink_work+0x180/0x248 [ 129.447706][ T934] process_one_work+0x260/0x624 [ 129.447718][ T934] worker_thread+0x28c/0x454 [ 129.447729][ T934] kthread+0x118/0x158 [ 129.447742][ T934] ret_from_fork+0x10/0x20 [ 129.447761][ T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000) [ 129.447772][ T934] ---[ end trace 0000000000000000 ]--- dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet is enabled, and __scan will be called in atomic context.

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mode1 reset crash issue If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal user space to abort the processes. After process abort exit, user queues still use the GPU to access system memory before h/w is reset while KFD cleanup worker free system memory and free VRAM. There is use-after-free race bug that KFD allocate and reuse the freed system memory, and user queue write to the same system memory to corrupt the data structure and cause driver crash. To fix this race, KFD cleanup worker terminate user queues, then flush reset_domain wq to wait for any GPU ongoing reset complete, and then free outstanding BOs.

In the Linux kernel, the following vulnerability has been resolved: erofs: avoid using multiple devices with different type For multiple devices, both primary and extra devices should be the same type. `erofs_init_device` has already guaranteed that if the primary is a file-backed device, extra devices should also be regular files. However, if the primary is a block device while the extra device is a file-backed device, `erofs_init_device` will get an ENOTBLK, which is not treated as an error in `erofs_fc_get_tree`, and that leads to an UAF: erofs_fc_get_tree get_tree_bdev_flags(erofs_fc_fill_super) erofs_read_superblock erofs_init_device // sbi->dif0 is not inited yet, // return -ENOTBLK deactivate_locked_super free(sbi) if (err is -ENOTBLK) sbi->dif0.file = filp_open() // sbi UAF So if -ENOTBLK is hitted in `erofs_init_device`, it means the primary device must be a block device, and the extra device is not a block device. The error can be converted to -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix double free in delayed_free The double free could happen in the following path. exfat_create_upcase_table() exfat_create_upcase_table() : return error exfat_free_upcase_table() : free ->vol_utbl exfat_load_default_upcase_table : return error exfat_kill_sb() delayed_free() exfat_free_upcase_table() <--------- double free This patch set ->vol_util as NULL after freeing it.

In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: Fix unlocked deletion of default FDB entry When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB entry associated with the default remote (assuming one was configured) is deleted without holding the hash lock. This is wrong and will result in a warning [1] being generated by the lockdep annotation that was added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup"). Reproducer: # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0 # bridge vni del vni 10010 dev vx0 Fix by acquiring the hash lock before the deletion and releasing it afterwards. Blame the original commit that introduced the issue rather than the one that exposed it. [1] WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0 [...] RIP: 0010:vxlan_find_mac+0x17f/0x1a0 [...] Call Trace: <TASK> __vxlan_fdb_delete+0xbe/0x560 vxlan_vni_delete_group+0x2ba/0x940 vxlan_vni_del.isra.0+0x15f/0x580 vxlan_process_vni_filter+0x38b/0x7b0 vxlan_vnifilter_process+0x3bb/0x510 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: x86/srso: Add SRSO mitigation for Hygon processors Add mitigation for the speculative return stack overflow vulnerability which exists on Hygon processors too.

In the Linux kernel, the following vulnerability has been resolved: mm, slab: clean up slab->obj_exts always When memory allocation profiling is disabled at runtime or due to an error, shutdown_mem_profiling() is called: slab->obj_exts which previously allocated remains. It won't be cleared by unaccount_slab() because of mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts should always be cleaned up in unaccount_slab() to avoid following error: [...]BUG: Bad page state in process... .. [...]page dumped because: page still charged to cgroup [andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user]

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix timeline left held on VMA alloc error The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f)

In the Linux kernel, the following vulnerability has been resolved: media: vivid: Change the siize of the composing syzkaller found a bug: BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304 CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline] tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705 vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline] vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629 vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> The composition size cannot be larger than the size of fmt_cap_rect. So execute v4l2_rect_map_inside() even if has_compose_cap == 0.

In the Linux kernel, the following vulnerability has been resolved: mctp: perform route lookups under a RCU read-side lock Our current route lookups (mctp_route_lookup and mctp_route_lookup_null) traverse the net's route list without the RCU read lock held. This means the route lookup is subject to preemption, resulting in an potential grace period expiry, and so an eventual kfree() while we still have the route pointer. Add the proper read-side critical section locks around the route lookups, preventing premption and a possible parallel kfree. The remaining net->mctp.routes accesses are already under a rcu_read_lock, or protected by the RTNL for updates. Based on an analysis from Sili Luo <rootlab@huawei.com>, where introducing a delay in the route lookup could cause a UAF on simultaneous sendmsg() and route deletion.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk Smatch detected a potential use-after-free of an ndlp oject in dev_loss_tmo_callbk during driver unload or fatal error handling. Fix by reordering code to avoid potential use-after-free if initial nodelist reference has been previously removed.