The microweber application allows large characters to insert in the input field "post title" which can allow attackers to cause a Denial of Service (DoS) via a crafted HTTP request. in GitHub repository microweber/microweber prior to 1.2.12.

Able to create an account with long password leads to memory corruption / Integer Overflow in GitHub repository microweber/microweber prior to 1.2.12.

Integer Overflow or Wraparound in GitHub repository microweber/microweber prior to 1.3.

In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix integer overflow bug on 32 bit systems Most of these sizes and counts are capped at 256MB so the math doesn't result in an integer overflow. The "relocs" count needs to be checked as well. Otherwise on 32bit systems the calculation of "full_data" could be wrong. full_data = data_len + relocs * sizeof(unsigned long);

In the Linux kernel, the following vulnerability has been resolved: rdma/cxgb4: Prevent potential integer overflow on 32bit The "gl->tot_len" variable is controlled by the user. It comes from process_responses(). On 32bit systems, the "gl->tot_len + sizeof(struct cpl_pass_accept_req) + sizeof(struct rss_header)" addition could have an integer wrapping bug. Use size_add() to prevent this.

In the Linux kernel, the following vulnerability has been resolved: printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which leads to undefined behavior. To prevent this, cast 1 to u32 before performing the shift, ensuring well-defined behavior. This change explicitly avoids any potential overflow by ensuring that the shift occurs on an unsigned 32-bit integer.

In the Linux kernel, the following vulnerability has been resolved: rtc: tps6594: Fix integer overflow on 32bit systems The problem is this multiply in tps6594_rtc_set_offset() tmp = offset * TICKS_PER_HOUR; The "tmp" variable is an s64 but "offset" is a long in the (-277774)-277774 range. On 32bit systems a long can hold numbers up to approximately two billion. The number of TICKS_PER_HOUR is really large, (32768 * 3600) or roughly a hundred million. When you start multiplying by a hundred million it doesn't take long to overflow the two billion mark. Probably the safest way to fix this is to change the type of TICKS_PER_HOUR to long long because it's such a large number.

Integer overflow vulnerability during glTF model loading in the 3D engine module Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent a potential integer overflow If the tag length is >= U32_MAX - 3 then the "length + 4" addition can result in an integer overflow. Address this by splitting the decoding into several steps so that decode_cb_compound4res() does not have to perform arithmetic on the unsafe length value.

In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dp: Fix integer overflow in zynqmp_dp_rate_get() This patch fixes a potential integer overflow in the zynqmp_dp_rate_get() The issue comes up when the expression drm_dp_bw_code_to_link_rate(dp->test.bw_code) * 10000 is evaluated using 32-bit Now the constant is a compatible 64-bit type. Resolves coverity issues: CID 1636340 and CID 1635811

In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix address wraparound in move_page_tables() On 32-bit platforms, it is possible for the expression `len + old_addr < old_end` to be false-positive if `len + old_addr` wraps around. `old_addr` is the cursor in the old range up to which page table entries have been moved; so if the operation succeeded, `old_addr` is the *end* of the old region, and adding `len` to it can wrap. The overflow causes mremap() to mistakenly believe that PTEs have been copied; the consequence is that mremap() bails out, but doesn't move the PTEs back before the new VMA is unmapped, causing anonymous pages in the region to be lost. So basically if userspace tries to mremap() a private-anon region and hits this bug, mremap() will return an error and the private-anon region's contents appear to have been zeroed. The idea of this check is that `old_end - len` is the original start address, and writing the check that way also makes it easier to read; so fix the check by rearranging the comparison accordingly. (An alternate fix would be to refactor this function by introducing an "orig_old_start" variable or such.) Tested in a VM with a 32-bit X86 kernel; without the patch: ``` user@horn:~/big_mremap$ cat test.c #define _GNU_SOURCE #include <stdlib.h> #include <stdio.h> #include <err.h> #include <sys/mman.h> #define ADDR1 ((void*)0x60000000) #define ADDR2 ((void*)0x10000000) #define SIZE 0x50000000uL int main(void) { unsigned char *p1 = mmap(ADDR1, SIZE, PROT_READ|PROT_WRITE, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED_NOREPLACE, -1, 0); if (p1 == MAP_FAILED) err(1, "mmap 1"); unsigned char *p2 = mmap(ADDR2, SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED_NOREPLACE, -1, 0); if (p2 == MAP_FAILED) err(1, "mmap 2"); *p1 = 0x41; printf("first char is 0x%02hhx\n", *p1); unsigned char *p3 = mremap(p1, SIZE, SIZE, MREMAP_MAYMOVE|MREMAP_FIXED, p2); if (p3 == MAP_FAILED) { printf("mremap() failed; first char is 0x%02hhx\n", *p1); } else { printf("mremap() succeeded; first char is 0x%02hhx\n", *p3); } } user@horn:~/big_mremap$ gcc -static -o test test.c user@horn:~/big_mremap$ setarch -R ./test first char is 0x41 mremap() failed; first char is 0x00 ``` With the patch: ``` user@horn:~/big_mremap$ setarch -R ./test first char is 0x41 mremap() succeeded; first char is 0x41 ```

Transient DOS can occur while processing UCI command.

In the Linux kernel, the following vulnerability has been resolved: io_uring: check for overflows in io_pin_pages WARNING: CPU: 0 PID: 5834 at io_uring/memmap.c:144 io_pin_pages+0x149/0x180 io_uring/memmap.c:144 CPU: 0 UID: 0 PID: 5834 Comm: syz-executor825 Not tainted 6.12.0-next-20241118-syzkaller #0 Call Trace: <TASK> __io_uaddr_map+0xfb/0x2d0 io_uring/memmap.c:183 io_rings_map io_uring/io_uring.c:2611 [inline] io_allocate_scq_urings+0x1c0/0x650 io_uring/io_uring.c:3470 io_uring_create+0x5b5/0xc00 io_uring/io_uring.c:3692 io_uring_setup io_uring/io_uring.c:3781 [inline] ... </TASK> io_pin_pages()'s uaddr parameter came directly from the user and can be garbage. Don't just add size to it as it can overflow.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Address an integer overflow Dan Carpenter reports: > Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data > structure") from Jun 22, 2020 (linux-next), leads to the following > Smatch static checker warning: > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk() > warn: potential user controlled sizeof overflow 'segcount * 4 * 4' > > net/sunrpc/xprtrdma/svc_rdma_recvfrom.c > 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt) > 489 { > 490 u32 segcount; > 491 __be32 *p; > 492 > 493 if (xdr_stream_decode_u32(&rctxt->rc_stream, &segcount)) > ^^^^^^^^ > > 494 return false; > 495 > 496 /* A bogus segcount causes this buffer overflow check to fail. */ > 497 p = xdr_inline_decode(&rctxt->rc_stream, > --> 498 segcount * rpcrdma_segment_maxsz * sizeof(*p)); > > > segcount is an untrusted u32. On 32bit systems anything >= SIZE_MAX / 16 will > have an integer overflow and some those values will be accepted by > xdr_inline_decode().

In the Linux kernel, the following vulnerability has been resolved: block: fix integer overflow in BLKSECDISCARD I independently rediscovered commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155 block: fix overflow in blk_ioctl_discard() but for secure erase. Same problem: uint64_t r[2] = {512, 18446744073709551104ULL}; ioctl(fd, BLKSECDISCARD, r); will enter near infinite loop inside blkdev_issue_secure_erase(): a.out: attempt to access beyond end of device loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048 bio_check_eod: 3286214 callbacks suppressed

MariaDB before 10.6.5 has a sql_lex.cc integer overflow, leading to an application crash.

TensorFlow is an open source platform for machine learning. In affected versions the implementation of `tf.math.segment_*` operations results in a `CHECK`-fail related abort (and denial of service) if a segment id in `segment_ids` is large. This is similar to CVE-2021-29584 (and similar other reported vulnerabilities in TensorFlow, localized to specific APIs): the implementation (both on CPU and GPU) computes the output shape using `AddDim`. However, if the number of elements in the tensor overflows an `int64_t` value, `AddDim` results in a `CHECK` failure which provokes a `std::abort`. Instead, code should use `AddDimWithStatus`. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

TensorFlow is an open source platform for machine learning. In affected versions TensorFlow allows tensor to have a large number of dimensions and each dimension can be as large as desired. However, the total number of elements in a tensor must fit within an `int64_t`. If an overflow occurs, `MultiplyWithoutOverflow` would return a negative result. In the majority of TensorFlow codebase this then results in a `CHECK`-failure. Newer constructs exist which return a `Status` instead of crashing the binary. This is similar to CVE-2021-29584. The fix will be included in TensorFlow 2.7.0. We will also cherrypick this commit on TensorFlow 2.6.1, TensorFlow 2.5.2, and TensorFlow 2.4.4, as these are also affected and still in supported range.

Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have an integer overflow vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could cause an integer overflow and might reset a process.

In the Linux kernel, the following vulnerability has been resolved: bpf: fix overflow check in adjust_jmp_off() adjust_jmp_off() incorrectly used the insn->imm field for all overflow check, which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case, not the general jump instruction case. Fix it by using insn->off for overflow check in the general case.

Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C10, V500R002C00, V600R006C00 have an integer overflow vulnerability. Due to insufficient input validation, an authenticated, remote attacker could send malformed SOAP packets to the target device. Successful exploit could cause an integer overflow and might reset a process.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt".

In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: tda10048: Fix integer overflow state->xtal_hz can be up to 16M, so it can overflow a 32 bit integer when multiplied by pll_mfactor. Create a new 64 bit variable to hold the calculations.

In the Linux kernel, the following vulnerability has been resolved: s390/ap: Fix crash in AP internal function modify_bitmap() A system crash like this Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX. The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow.

in OpenHarmony v4.0.0 and prior versions allow a local attacker cause service crash through integer overflow.

Integer Overflow or Wraparound vulnerability in openEuler kernel on Linux (filesystem modules) allows Forced Integer Overflow.This issue affects openEuler kernel: from 4.19.90 before 4.19.90-2401.3, from 5.10.0-60.18.0 before 5.10.0-183.0.0.

In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init() Change num_ghes from int to unsigned int, preventing an overflow and causing subsequent vmalloc() to fail. The overflow happens in ghes_estatus_pool_init() when calculating len during execution of the statement below as both multiplication operands here are signed int: len += (num_ghes * GHES_ESOURCE_PREALLOC_MAX_SIZE); The following call trace is observed because of this bug: [ 9.317108] swapper/0: vmalloc error: size 18446744071562596352, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0-1 [ 9.317131] Call Trace: [ 9.317134] <TASK> [ 9.317137] dump_stack_lvl+0x49/0x5f [ 9.317145] dump_stack+0x10/0x12 [ 9.317146] warn_alloc.cold+0x7b/0xdf [ 9.317150] ? __device_attach+0x16a/0x1b0 [ 9.317155] __vmalloc_node_range+0x702/0x740 [ 9.317160] ? device_add+0x17f/0x920 [ 9.317164] ? dev_set_name+0x53/0x70 [ 9.317166] ? platform_device_add+0xf9/0x240 [ 9.317168] __vmalloc_node+0x49/0x50 [ 9.317170] ? ghes_estatus_pool_init+0x43/0xa0 [ 9.317176] vmalloc+0x21/0x30 [ 9.317177] ghes_estatus_pool_init+0x43/0xa0 [ 9.317179] acpi_hest_init+0x129/0x19c [ 9.317185] acpi_init+0x434/0x4a4 [ 9.317188] ? acpi_sleep_proc_init+0x2a/0x2a [ 9.317190] do_one_initcall+0x48/0x200 [ 9.317195] kernel_init_freeable+0x221/0x284 [ 9.317200] ? rest_init+0xe0/0xe0 [ 9.317204] kernel_init+0x1a/0x130 [ 9.317205] ret_from_fork+0x22/0x30 [ 9.317208] </TASK> [ rjw: Subject and changelog edits ]

An integer overflow exists in pywin32 prior to version b301 when adding an access control entry (ACE) to an access control list (ACL) that would cause the size to be greater than 65535 bytes. An attacker who successfully exploited this vulnerability could crash the vulnerable process.

An issue was discovered in Squid before 4.15 and 5.x before 5.0.6. An integer overflow problem allows a remote server to achieve Denial of Service when delivering responses to HTTP Range requests. The issue trigger is a header that can be expected to exist in HTTP traffic without any malicious intent.

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix overflow check in io_recvmsg_mshot_prep() The "controllen" variable is type size_t (unsigned long). Casting it to int could lead to an integer underflow. The check_add_overflow() function considers the type of the destination which is type int. If we add two positive values and the result cannot fit in an integer then that's counted as an overflow. However, if we cast "controllen" to an int and it turns negative, then negative values *can* fit into an int type so there is no overflow. Good: 100 + (unsigned long)-4 = 96 <-- overflow Bad: 100 + (int)-4 = 96 <-- no overflow I deleted the cast of the sizeof() as well. That's not a bug but the cast is unnecessary.

An issue was discovered in Squid before 4.15 and 5.x before 5.0.6. Due to an input-validation bug, it is vulnerable to a Denial of Service attack (against all clients using the proxy). A client sends an HTTP Range request to trigger this.

Integer overflow in the xfs_acl_from_disk function in fs/xfs/xfs_acl.c in the Linux kernel before 3.1.9 allows local users to cause a denial of service (panic) via a filesystem with a malformed ACL, leading to a heap-based buffer overflow.

Integer overflow in the oom_badness function in mm/oom_kill.c in the Linux kernel before 3.1.8 on 64-bit platforms allows local users to cause a denial of service (memory consumption or process termination) by using a certain large amount of memory.

Integer overflow vulnerability in av_timecode_make_string in libavutil/timecode.c in FFmpeg version 4.3.2, allows local attackers to cause a denial of service (DoS) via crafted .mov file.

TensorFlow is an end-to-end open source platform for machine learning. An attacker can trigger a denial of service via a `CHECK`-fail in `tf.raw_ops.AddManySparseToTensorsMap`. This is because the implementation(https://github.com/tensorflow/tensorflow/blob/6f9896890c4c703ae0a0845394086e2e1e523299/tensorflow/core/kernels/sparse_tensors_map_ops.cc#L257) takes the values specified in `sparse_shape` as dimensions for the output shape. The `TensorShape` constructor(https://github.com/tensorflow/tensorflow/blob/6f9896890c4c703ae0a0845394086e2e1e523299/tensorflow/core/framework/tensor_shape.cc#L183-L188) uses a `CHECK` operation which triggers when `InitDims`(https://github.com/tensorflow/tensorflow/blob/6f9896890c4c703ae0a0845394086e2e1e523299/tensorflow/core/framework/tensor_shape.cc#L212-L296) returns a non-OK status. This is a legacy implementation of the constructor and operations should use `BuildTensorShapeBase` or `AddDimWithStatus` to prevent `CHECK`-failures in the presence of overflows. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.

AMD System Management Unit (SMU) may experience an integer overflow when an invalid length is provided which may result in a potential loss of resources.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: reject configurations that cause integer overflow Reject bogus configs where internal token counter wraps around. This only occurs with very very large requests, such as 17gbyte/s. Its better to reject this rather than having incorrect ratelimit.

In the Linux kernel, the following vulnerability has been resolved: padata: use integer wrap around to prevent deadlock on seq_nr overflow When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow.

copy_params in drivers/md/dm-ioctl.c in the Linux kernel through 6.7.1 can attempt to allocate more than INT_MAX bytes, and crash, because of a missing param_kernel->data_size check. This is related to ctl_ioctl.

An issue in GPAC GPAC v.2.2.1 and before allows a local attacker to cause a denial of service via the Q_DecCoordOnUnitSphere function of file src/bifs/unquantize.c.

An integer overflow flaw was found in the Linux kernel. This issue leads to the kernel allocating `skb_shared_info` in the userspace, which is exploitable in systems without SMAP protection since `skb_shared_info` contains references to function pointers.

A user authorized to perform database queries may trigger denial of service by issuing specially crafted queries, which use the $mod operator to overflow negative values. This issue affects: MongoDB Inc. MongoDB Server v4.4 versions prior to 4.4.1; v4.2 versions prior to 4.2.9; v4.0 versions prior to 4.0.20; v3.6 versions prior to 3.6.20.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix coverity issue with unintentional integer overflow 1. Instead of multiplying 2 variable of different types. Change to assign a value of one variable and then multiply the other variable. 2. Add a int variable for multiplier calculation instead of calculating different types multiplier with dma_addr_t variable directly.

A vulnerability in the Secure Copy (SCP) feature of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to the use of an incorrect data type for a length variable. An attacker could exploit this vulnerability by initiating the transfer of a large file to an affected device via SCP. To exploit this vulnerability, the attacker would need to have valid privilege level 15 credentials on the affected device. A successful exploit could allow the attacker to cause the length variable to roll over, which could cause the affected device to crash.

Integer overflow in DxeImageVerificationHandler() EDK II may allow an authenticated user to potentially enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: net/sctp: Prevent autoclose integer overflow in sctp_association_init() While by default max_autoclose equals to INT_MAX / HZ, one may set net.sctp.max_autoclose to UINT_MAX. There is code in sctp_association_init() that can consequently trigger overflow.

Integer format vulnerability in the ticket number generator in Enhancesoft osTicket before 1.10.2 allows remote attackers to cause a denial-of-service (preventing the creation of new tickets) via a large number of digits in the ticket number format setting.

Trusty contains a vulnerability in the NVIDIA TLK kernel function where a lack of checks allows the exploitation of an integer overflow through a specific SMC call that is triggered by the user, which may lead to denial of service.

Redis is an in-memory database that persists on disk. Authenticated users issuing specially crafted `SRANDMEMBER`, `ZRANDMEMBER`, and `HRANDFIELD` commands can trigger an integer overflow, resulting in a runtime assertion and termination of the Redis server process. This problem affects all Redis versions. Patches were released in Redis version(s) 6.0.18, 6.2.11 and 7.0.9.

TensorFlow is an end-to-end open source platform for machine learning. An attacker can trigger a denial of service via a `CHECK`-fail in caused by an integer overflow in constructing a new tensor shape. This is because the implementation(https://github.com/tensorflow/tensorflow/blob/0908c2f2397c099338b901b067f6495a5b96760b/tensorflow/core/kernels/sparse_split_op.cc#L66-L70) builds a dense shape without checking that the dimensions would not result in overflow. The `TensorShape` constructor(https://github.com/tensorflow/tensorflow/blob/6f9896890c4c703ae0a0845394086e2e1e523299/tensorflow/core/framework/tensor_shape.cc#L183-L188) uses a `CHECK` operation which triggers when `InitDims`(https://github.com/tensorflow/tensorflow/blob/6f9896890c4c703ae0a0845394086e2e1e523299/tensorflow/core/framework/tensor_shape.cc#L212-L296) returns a non-OK status. This is a legacy implementation of the constructor and operations should use `BuildTensorShapeBase` or `AddDimWithStatus` to prevent `CHECK`-failures in the presence of overflows. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range.