In the Linux kernel, the following vulnerability has been resolved: iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic() When performing an iSCSI boot using IPv6, iscsistart still reads the /sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix length is 64, this causes the shift exponent to become negative, triggering a UBSAN warning. As the concept of a subnet mask does not apply to IPv6, the value is set to ~0 to suppress the warning message.

In the Linux kernel, the following vulnerability has been resolved: ice: validate queue quanta parameters to prevent OOB access Add queue wraparound prevention in quanta configuration. Ensure end_qid does not overflow by validating start_qid and num_queues.

In the Linux kernel, the following vulnerability has been resolved: mm/compaction: fix UBSAN shift-out-of-bounds warning syzkaller reported a UBSAN shift-out-of-bounds warning of (1UL << order) in isolate_freepages_block(). The bogus compound_order can be any value because it is union with flags. Add back the MAX_PAGE_ORDER check to fix the warning.

In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix stack-out-of-bounds read in usb_check_int_endpoints() Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from hid-thrustmaster driver. This array is passed to usb_check_int_endpoints function from usb.c core driver, which executes a for loop that iterates over the elements of the passed array. Not finding a null element at the end of the array, it tries to read the next, non-existent element, crashing the kernel. To fix this, a 0 element was added at the end of the array to break the for loop. [1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix kasan out-of-bounds warning in sja1105_table_delete_entry() There are actually 2 problems: - deleting the last element doesn't require the memmove of elements [i + 1, end) over it. Actually, element i+1 is out of bounds. - The memmove itself should move size - i - 1 elements, because the last element is out of bounds. The out-of-bounds element still remains out of bounds after being accessed, so the problem is only that we touch it, not that it becomes in active use. But I suppose it can lead to issues if the out-of-bounds element is part of an unmapped page.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds in parse_sec_desc() If osidoffset, gsidoffset and dacloffset could be greater than smb_ntsd struct size. If it is smaller, It could cause slab-out-of-bounds. And when validating sid, It need to check it included subauth array size.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check The dacloffset field was originally typed as int and used in an unchecked addition, which could overflow and bypass the existing bounds check in both smb_check_perm_dacl() and smb_inherit_dacl(). This could result in out-of-bounds memory access and a kernel crash when dereferencing the DACL pointer. This patch converts dacloffset to unsigned int and uses check_add_overflow() to validate access to the DACL.

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix out-of-range access of vnic_info array The bnxt_queue_{start | stop}() access vnic_info as much as allocated, which indicates bp->nr_vnics. So, it should not reach bp->vnic_info[bp->nr_vnics].

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: limit printed string from FW file There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have.

In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed When retrieving the PDH cert, don't attempt to copy the blobs to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033 CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347 sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error.

A flaw was found in libtpms. The flaw can be triggered by specially-crafted TPM 2 command packets containing illegal values and may lead to an out-of-bounds access when the volatile state of the TPM 2 is marshalled/written or unmarshalled/read. The highest threat from this vulnerability is to system availability.

Double free in Intel(R) SGX SDK for Linux before version 2.2 and Intel(R) SGX SDK for Windows before version 2.1 may allow an authenticated user to potentially enable information disclosure or denial of service via local access.

The vmsvga_fifo_read_raw function in hw/display/vmware_vga.c in QEMU allows local guest OS administrators to obtain sensitive host memory information or cause a denial of service (QEMU process crash) by changing FIFO registers and issuing a VGA command, which triggers an out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: zonefs: fix zonefs_iomap_begin() for reads If a readahead is issued to a sequential zone file with an offset exactly equal to the current file size, the iomap type is set to IOMAP_UNWRITTEN, which will prevent an IO, but the iomap length is calculated as 0. This causes a WARN_ON() in iomap_iter(): [17309.548939] WARNING: CPU: 3 PID: 2137 at fs/iomap/iter.c:34 iomap_iter+0x9cf/0xe80 [...] [17309.650907] RIP: 0010:iomap_iter+0x9cf/0xe80 [...] [17309.754560] Call Trace: [17309.757078] <TASK> [17309.759240] ? lock_is_held_type+0xd8/0x130 [17309.763531] iomap_readahead+0x1a8/0x870 [17309.767550] ? iomap_read_folio+0x4c0/0x4c0 [17309.771817] ? lockdep_hardirqs_on_prepare+0x400/0x400 [17309.778848] ? lock_release+0x370/0x750 [17309.784462] ? folio_add_lru+0x217/0x3f0 [17309.790220] ? reacquire_held_locks+0x4e0/0x4e0 [17309.796543] read_pages+0x17d/0xb60 [17309.801854] ? folio_add_lru+0x238/0x3f0 [17309.807573] ? readahead_expand+0x5f0/0x5f0 [17309.813554] ? policy_node+0xb5/0x140 [17309.819018] page_cache_ra_unbounded+0x27d/0x450 [17309.825439] filemap_get_pages+0x500/0x1450 [17309.831444] ? filemap_add_folio+0x140/0x140 [17309.837519] ? lock_is_held_type+0xd8/0x130 [17309.843509] filemap_read+0x28c/0x9f0 [17309.848953] ? zonefs_file_read_iter+0x1ea/0x4d0 [zonefs] [17309.856162] ? trace_contention_end+0xd6/0x130 [17309.862416] ? __mutex_lock+0x221/0x1480 [17309.868151] ? zonefs_file_read_iter+0x166/0x4d0 [zonefs] [17309.875364] ? filemap_get_pages+0x1450/0x1450 [17309.881647] ? __mutex_unlock_slowpath+0x15e/0x620 [17309.888248] ? wait_for_completion_io_timeout+0x20/0x20 [17309.895231] ? lock_is_held_type+0xd8/0x130 [17309.901115] ? lock_is_held_type+0xd8/0x130 [17309.906934] zonefs_file_read_iter+0x356/0x4d0 [zonefs] [17309.913750] new_sync_read+0x2d8/0x520 [17309.919035] ? __x64_sys_lseek+0x1d0/0x1d0 Furthermore, this causes iomap_readahead() to loop forever as iomap_readahead_iter() always returns 0, making no progress. Fix this by treating reads after the file size as access to holes, setting the iomap type to IOMAP_HOLE, the iomap addr to IOMAP_NULL_ADDR and using the length argument as is for the iomap length. To simplify the code with this change, zonefs_iomap_begin() is split into the read variant, zonefs_read_iomap_begin() and zonefs_read_iomap_ops, and the write variant, zonefs_write_iomap_begin() and zonefs_write_iomap_ops.

A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: orangefs: fix a oob in orangefs_debug_write I got a syzbot report: slab-out-of-bounds Read in orangefs_debug_write... several people suggested fixes, I tested Al Viro's suggestion and made this patch.

An out-of-bounds read vulnerability was found in smbCalcSize in fs/smb/client/netmisc.c in the Linux Kernel. This issue could allow a local attacker to crash the system or leak internal kernel information.

In the Linux kernel, the following vulnerability has been resolved: hfs: fix slab-out-of-bounds in hfs_bnode_read() This patch introduces is_bnode_offset_valid() method that checks the requested offset value. Also, it introduces check_and_correct_requested_length() method that checks and correct the requested length (if it is necessary). These methods are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(), hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent the access out of allocated memory and triggering the crash.

In the Linux kernel, the following vulnerability has been resolved: iio: light: as73211: Ensure buffer holes are zeroed Given that the buffer is copied to a kfifo that ultimately user space can read, ensure we zero it.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc() The hfsplus_readdir() method is capable to crash by calling hfsplus_uni2asc(): [ 667.121659][ T9805] ================================================================== [ 667.122651][ T9805] BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0x902/0xa10 [ 667.123627][ T9805] Read of size 2 at addr ffff88802592f40c by task repro/9805 [ 667.124578][ T9805] [ 667.124876][ T9805] CPU: 3 UID: 0 PID: 9805 Comm: repro Not tainted 6.16.0-rc3 #1 PREEMPT(full) [ 667.124886][ T9805] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 667.124890][ T9805] Call Trace: [ 667.124893][ T9805] <TASK> [ 667.124896][ T9805] dump_stack_lvl+0x10e/0x1f0 [ 667.124911][ T9805] print_report+0xd0/0x660 [ 667.124920][ T9805] ? __virt_addr_valid+0x81/0x610 [ 667.124928][ T9805] ? __phys_addr+0xe8/0x180 [ 667.124934][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124942][ T9805] kasan_report+0xc6/0x100 [ 667.124950][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124959][ T9805] hfsplus_uni2asc+0x902/0xa10 [ 667.124966][ T9805] ? hfsplus_bnode_read+0x14b/0x360 [ 667.124974][ T9805] hfsplus_readdir+0x845/0xfc0 [ 667.124984][ T9805] ? __pfx_hfsplus_readdir+0x10/0x10 [ 667.124994][ T9805] ? stack_trace_save+0x8e/0xc0 [ 667.125008][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125015][ T9805] ? trace_lock_acquire+0x85/0xd0 [ 667.125022][ T9805] ? lock_acquire+0x30/0x80 [ 667.125029][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125037][ T9805] ? down_read_killable+0x1ed/0x4c0 [ 667.125044][ T9805] ? putname+0x154/0x1a0 [ 667.125051][ T9805] ? __pfx_down_read_killable+0x10/0x10 [ 667.125058][ T9805] ? apparmor_file_permission+0x239/0x3e0 [ 667.125069][ T9805] iterate_dir+0x296/0xb20 [ 667.125076][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.125084][ T9805] ? __pfx___x64_sys_getdents64+0x10/0x10 [ 667.125091][ T9805] ? __x64_sys_openat+0x141/0x200 [ 667.125126][ T9805] ? __pfx_filldir64+0x10/0x10 [ 667.125134][ T9805] ? do_user_addr_fault+0x7fe/0x12f0 [ 667.125143][ T9805] do_syscall_64+0xc9/0x480 [ 667.125151][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.125158][ T9805] RIP: 0033:0x7fa8753b2fc9 [ 667.125164][ T9805] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 48 [ 667.125172][ T9805] RSP: 002b:00007ffe96f8e0f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000d9 [ 667.125181][ T9805] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa8753b2fc9 [ 667.125185][ T9805] RDX: 0000000000000400 RSI: 00002000000063c0 RDI: 0000000000000004 [ 667.125190][ T9805] RBP: 00007ffe96f8e110 R08: 00007ffe96f8e110 R09: 00007ffe96f8e110 [ 667.125195][ T9805] R10: 0000000000000000 R11: 0000000000000217 R12: 0000556b1e3b4260 [ 667.125199][ T9805] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 667.125207][ T9805] </TASK> [ 667.125210][ T9805] [ 667.145632][ T9805] Allocated by task 9805: [ 667.145991][ T9805] kasan_save_stack+0x20/0x40 [ 667.146352][ T9805] kasan_save_track+0x14/0x30 [ 667.146717][ T9805] __kasan_kmalloc+0xaa/0xb0 [ 667.147065][ T9805] __kmalloc_noprof+0x205/0x550 [ 667.147448][ T9805] hfsplus_find_init+0x95/0x1f0 [ 667.147813][ T9805] hfsplus_readdir+0x220/0xfc0 [ 667.148174][ T9805] iterate_dir+0x296/0xb20 [ 667.148549][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.148937][ T9805] do_syscall_64+0xc9/0x480 [ 667.149291][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.149809][ T9805] [ 667.150030][ T9805] The buggy address belongs to the object at ffff88802592f000 [ 667.150030][ T9805] which belongs to the cache kmalloc-2k of size 2048 [ 667.151282][ T9805] The buggy address is located 0 bytes to the right of [ 667.151282][ T9805] allocated 1036-byte region [ffff88802592f000, ffff88802592f40c) [ 667.1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: smb3: fix for slab out of bounds on mount to ksmbd With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs]

In the Linux kernel, the following vulnerability has been resolved: audit: fix out-of-bounds read in audit_compare_dname_path() When a watch on dir=/ is combined with an fsnotify event for a single-character name directly under / (e.g., creating /a), an out-of-bounds read can occur in audit_compare_dname_path(). The helper parent_len() returns 1 for "/". In audit_compare_dname_path(), when parentlen equals the full path length (1), the code sets p = path + 1 and pathlen = 1 - 1 = 0. The subsequent loop then dereferences p[pathlen - 1] (i.e., p[-1]), causing an out-of-bounds read. Fix this by adding a pathlen > 0 check to the while loop condition to prevent the out-of-bounds access. [PM: subject tweak, sign-off email fixes]

In the Linux kernel, the following vulnerability has been resolved: i2c: rtl9300: Fix out-of-bounds bug in rtl9300_i2c_smbus_xfer The data->block[0] variable comes from user. Without proper check, the variable may be very large to cause an out-of-bounds bug. Fix this bug by checking the value of data->block[0] first. 1. commit 39244cc75482 ("i2c: ismt: Fix an out-of-bounds bug in ismt_access()") 2. commit 92fbb6d1296f ("i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()")

In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbdirect: validate data_offset and data_length field of smb_direct_data_transfer If data_offset and data_length of smb_direct_data_transfer struct are invalid, out of bounds issue could happen. This patch validate data_offset and data_length field in recv_done.

The net_checksum_calculate function in net/checksum.c in QEMU allows local guest OS users to cause a denial of service (out-of-bounds heap read and crash) via the payload length in a crafted packet.

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: <TASK> unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 </TASK> Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Correct tid cleanup when tid setup fails Currently, if any error occurs during ath12k_dp_rx_peer_tid_setup(), the tid value is already incremented, even though the corresponding TID is not actually allocated. Proceed to ath12k_dp_rx_peer_tid_delete() starting from unallocated tid, which might leads to freeing unallocated TID and cause potential crash or out-of-bounds access. Hence, fix by correctly decrementing tid before cleanup to match only the successfully allocated TIDs. Also, remove tid-- from failure case of ath12k_dp_rx_peer_frag_setup(), as decrementing the tid before cleanup in loop will take care of this. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access.

In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: edma: Fix memory allocation size for queue_priority_map Fix a critical memory allocation bug in edma_setup_from_hw() where queue_priority_map was allocated with insufficient memory. The code declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8), but allocated memory using sizeof(s8) instead of the correct size. This caused out-of-bounds memory writes when accessing: queue_priority_map[i][0] = i; queue_priority_map[i][1] = i; The bug manifested as kernel crashes with "Oops - undefined instruction" on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the memory corruption triggered kernel hardening features on Clang. Change the allocation to use sizeof(*queue_priority_map) which automatically gets the correct size for the 2D array structure.

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels The cacheinfo sets up the shared_cpu_map by checking whether the caches with the same index are shared between CPUs. However, this will trigger slab-out-of-bounds access if the CPUs do not have the same cache hierarchy. Another problem is the mismatched shared_cpu_map when the shared cache does not have the same index between CPUs. CPU0 I D L3 index 0 1 2 x ^ ^ ^ ^ index 0 1 2 3 CPU1 I D L2 L3 This patch checks each cache is shared with all caches on other CPUs.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix kernel crash due to null io->bio We should return when io->bio is null before doing anything. Otherwise, panic. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs] Call Trace: <TASK> f2fs_submit_merged_write+0x1d/0x30 [f2fs] commit_checkpoint+0x110/0x1e0 [f2fs] f2fs_write_checkpoint+0x9f7/0xf00 [f2fs] ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] __checkpoint_and_complete_reqs+0x84/0x190 [f2fs] ? preempt_count_add+0x82/0xc0 ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] issue_checkpoint_thread+0x4c/0xf0 [f2fs] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xff/0x130 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK>

In the Linux kernel, the following vulnerability has been resolved: comedi: das6402: Fix bit shift out of bounds When checking for a supported IRQ number, the following test is used: /* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */ if ((1 << it->options[1]) & 0x8cec) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.

In the Linux kernel, the following vulnerability has been resolved: soundwire: qcom: fix storing port config out-of-bounds The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14), however we index it starting from 1, not 0, to match real port numbers. This can lead to writing port config past 'pconfig' bounds and overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by smatch: drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14

In the Linux kernel, the following vulnerability has been resolved: jfs: jfs_dmap: Validate db_l2nbperpage while mounting In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block number inside dbFree(). db_l2nbperpage, which is the log2 number of blocks per page, is passed as an argument to BLKTODMAP which uses it for shifting. Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is too big. This happens because the large value is set without any validation in dbMount() at line 181. Thus, make sure that db_l2nbperpage is correct while mounting. Max number of blocks per page = Page size / Min block size => log2(Max num_block per page) = log2(Page size / Min block size) = log2(Page size) - log2(Min block size) => Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE

In the Linux kernel, the following vulnerability has been resolved: tunnels: fix kasan splat when generating ipv4 pmtu error If we try to emit an icmp error in response to a nonliner skb, we get BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220 Read of size 4 at addr ffff88811c50db00 by task iperf3/1691 CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309 [..] kasan_report+0x105/0x140 ip_compute_csum+0x134/0x220 iptunnel_pmtud_build_icmp+0x554/0x1020 skb_tunnel_check_pmtu+0x513/0xb80 vxlan_xmit_one+0x139e/0x2ef0 vxlan_xmit+0x1867/0x2760 dev_hard_start_xmit+0x1ee/0x4f0 br_dev_queue_push_xmit+0x4d1/0x660 [..] ip_compute_csum() cannot deal with nonlinear skbs, so avoid it. After this change, splat is gone and iperf3 is no longer stuck.

In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix out-of-bounds when setting channels on remove If we set channels greater during iavf_remove(), and waiting reset done would be timeout, then returned with error but changed num_active_queues directly, that will lead to OOB like the following logs. Because the num_active_queues is greater than tx/rx_rings[] allocated actually. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 3506.152887] iavf 0000:41:02.0: Removing device [ 3510.400799] ================================================================== [ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536 [ 3510.400823] [ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 3510.400835] Call Trace: [ 3510.400851] dump_stack+0x71/0xab [ 3510.400860] print_address_description+0x6b/0x290 [ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400868] kasan_report+0x14a/0x2b0 [ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf] [ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf] [ 3510.400891] ? wait_woken+0x1d0/0x1d0 [ 3510.400895] ? notifier_call_chain+0xc1/0x130 [ 3510.400903] pci_device_remove+0xa8/0x1f0 [ 3510.400910] device_release_driver_internal+0x1c6/0x460 [ 3510.400916] pci_stop_bus_device+0x101/0x150 [ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20 [ 3510.400924] pci_iov_remove_virtfn+0x187/0x420 [ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10 [ 3510.400929] ? pci_get_subsys+0x90/0x90 [ 3510.400932] sriov_disable+0xed/0x3e0 [ 3510.400936] ? bus_find_device+0x12d/0x1a0 [ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e] [ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 3510.400968] ? pci_get_device+0x7c/0x90 [ 3510.400970] ? pci_get_subsys+0x90/0x90 [ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210 [ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 3510.401001] sriov_numvfs_store+0x214/0x290 [ 3510.401005] ? sriov_totalvfs_show+0x30/0x30 [ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.401011] ? __check_object_size+0x15a/0x350 [ 3510.401018] kernfs_fop_write+0x280/0x3f0 [ 3510.401022] vfs_write+0x145/0x440 [ 3510.401025] ksys_write+0xab/0x160 [ 3510.401028] ? __ia32_sys_read+0xb0/0xb0 [ 3510.401031] ? fput_many+0x1a/0x120 [ 3510.401032] ? filp_close+0xf0/0x130 [ 3510.401038] do_syscall_64+0xa0/0x370 [ 3510.401041] ? page_fault+0x8/0x30 [ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 3510.401073] RIP: 0033:0x7f3a9bb842c0 [ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data The MT7921 driver no longer uses eeprom.data, but the relevant code has not been removed completely since commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability"). This could result in potential invalid memory access. To fix the kernel panic issue in mt7921, it is necessary to avoid accessing unallocated eeprom.data which can lead to invalid memory access. Furthermore, it is possible to entirely eliminate the mt7921_mcu_parse_eeprom function and solely depend on mt7921_mcu_parse_response to divide the RxD header. [2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550 [2.702740] #PF: supervisor write access in kernel mode [2.702741] #PF: error_code(0x0002) - not-present page [2.702743] PGD 0 P4D 0 [2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI [2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common] [2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286 [2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000 [2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500 [2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005 [2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40 [2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40 [2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000 [2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0 [2.702776] PKRU: 55555554 [2.702777] Call Trace: [2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>] [2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>] [2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>] [2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>] [2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>] [2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>] [2.702799] pci_device_probe+0x9f/0x12a

In the Linux kernel, the following vulnerability has been resolved: comedi: pcl726: Prevent invalid irq number The reproducer passed in an irq number(0x80008000) that was too large, which triggered the oob. Added an interrupt number check to prevent users from passing in an irq number that was too large. If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid because it shifts a 1-bit into the sign bit (which is UB in C). Possible solutions include reducing the upper bound on the `it->options[1]` value to 30 or lower, or using `1U << it->options[1]`. The old code would just not attempt to request the IRQ if the `options[1]` value were invalid. And it would still configure the device without interrupts even if the call to `request_irq` returned an error. So it would be better to combine this test with the test below.

In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix possible desc_ptr out-of-bounds accesses Sanitize possible desc_ptr out-of-bounds accesses in ses_enclosure_data_process().

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one Eric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer. BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0 Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371 [..] Fix this by increasing the stack buffer to also include room for the extra sequence numbers and all the known dccp packet type headers, then pull again after the initial validation of the basic header. While at it, mark packets invalid that lack 48bit sequence bit but where RFC says the type MUST use them. Compile tested only. v2: first skb_header_pointer() now needs to adjust the size to only pull the generic header. (Eric) Heads-up: I intend to remove dccp conntrack support later this year.

In the Linux kernel, the following vulnerability has been resolved: net: ena: fix shift-out-of-bounds in exponential backoff The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies() Fix a slab-out-of-bounds read that occurs in kmemdup() called from brcmf_get_assoc_ies(). The bug could occur when assoc_info->req_len, data from a URB provided by a USB device, is bigger than the size of buffer which is defined as WL_EXTRA_BUF_MAX. Add the size check for req_len/resp_len of assoc_info. Found by a modified version of syzkaller. [ 46.592467][ T7] ================================================================== [ 46.594687][ T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50 [ 46.596572][ T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7 [ 46.598575][ T7] [ 46.599157][ T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #145 [ 46.601333][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 46.604360][ T7] Workqueue: events brcmf_fweh_event_worker [ 46.605943][ T7] Call Trace: [ 46.606584][ T7] dump_stack_lvl+0x8e/0xd1 [ 46.607446][ T7] print_address_description.constprop.0.cold+0x93/0x334 [ 46.608610][ T7] ? kmemdup+0x3e/0x50 [ 46.609341][ T7] kasan_report.cold+0x79/0xd5 [ 46.610151][ T7] ? kmemdup+0x3e/0x50 [ 46.610796][ T7] kasan_check_range+0x14e/0x1b0 [ 46.611691][ T7] memcpy+0x20/0x60 [ 46.612323][ T7] kmemdup+0x3e/0x50 [ 46.612987][ T7] brcmf_get_assoc_ies+0x967/0xf60 [ 46.613904][ T7] ? brcmf_notify_vif_event+0x3d0/0x3d0 [ 46.614831][ T7] ? lock_chain_count+0x20/0x20 [ 46.615683][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.616552][ T7] ? lock_chain_count+0x20/0x20 [ 46.617409][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.618244][ T7] ? lock_chain_count+0x20/0x20 [ 46.619024][ T7] brcmf_bss_connect_done.constprop.0+0x241/0x2e0 [ 46.620019][ T7] ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0 [ 46.620818][ T7] ? __lock_acquire+0x181f/0x5790 [ 46.621462][ T7] brcmf_notify_connect_status+0x448/0x1950 [ 46.622134][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.622736][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.623390][ T7] ? find_held_lock+0x2d/0x110 [ 46.623962][ T7] ? brcmf_fweh_event_worker+0x19f/0xc60 [ 46.624603][ T7] ? mark_held_locks+0x9f/0xe0 [ 46.625145][ T7] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 [ 46.625871][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.626545][ T7] brcmf_fweh_call_event_handler.isra.0+0x90/0x100 [ 46.627338][ T7] brcmf_fweh_event_worker+0x557/0xc60 [ 46.627962][ T7] ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 [ 46.628736][ T7] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 46.629396][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.629970][ T7] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 46.630649][ T7] process_one_work+0x92b/0x1460 [ 46.631205][ T7] ? pwq_dec_nr_in_flight+0x330/0x330 [ 46.631821][ T7] ? rwlock_bug.part.0+0x90/0x90 [ 46.632347][ T7] worker_thread+0x95/0xe00 [ 46.632832][ T7] ? __kthread_parkme+0x115/0x1e0 [ 46.633393][ T7] ? process_one_work+0x1460/0x1460 [ 46.633957][ T7] kthread+0x3a1/0x480 [ 46.634369][ T7] ? set_kthread_struct+0x120/0x120 [ 46.634933][ T7] ret_from_fork+0x1f/0x30 [ 46.635431][ T7] [ 46.635687][ T7] Allocated by task 7: [ 46.636151][ T7] kasan_save_stack+0x1b/0x40 [ 46.636628][ T7] __kasan_kmalloc+0x7c/0x90 [ 46.637108][ T7] kmem_cache_alloc_trace+0x19e/0x330 [ 46.637696][ T7] brcmf_cfg80211_attach+0x4a0/0x4040 [ 46.638275][ T7] brcmf_attach+0x389/0xd40 [ 46.638739][ T7] brcmf_usb_probe+0x12de/0x1690 [ 46.639279][ T7] usb_probe_interface+0x2aa/0x760 [ 46.639820][ T7] really_probe+0x205/0xb70 [ 46.640342][ T7] __driver_probe_device+0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfilter: nftables: exthdr: fix 4-byte stack OOB write If priv->len is a multiple of 4, then dst[len / 4] can write past the destination array which leads to stack corruption. This construct is necessary to clean the remainder of the register in case ->len is NOT a multiple of the register size, so make it conditional just like nft_payload.c does. The bug was added in 4.1 cycle and then copied/inherited when tcp/sctp and ip option support was added. Bug reported by Zero Day Initiative project (ZDI-CAN-21950, ZDI-CAN-21951, ZDI-CAN-21961).

In the Linux kernel, the following vulnerability has been resolved: ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and size. This would make xlate_pos negative. [ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000 [ 23.734158] ================================================================================ [ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7 [ 23.734418] shift exponent -1 is negative Ensuring xlate_pos is a positive or zero before BIT.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea.