A vulnerability in the scanning engines of Cisco AsyncOS Software for Cisco Secure Web Appliance, formerly known as Cisco Web Security Appliance (WSA), could allow an unauthenticated, remote attacker to bypass a configured rule, thereby allowing traffic onto a network that should have been blocked. This vulnerability exists because malformed, encoded traffic is not properly detected. An attacker could exploit this vulnerability by connecting through an affected device to a malicious server and receiving malformed HTTP responses. A successful exploit could allow the attacker to bypass an explicit block rule and receive traffic that should have been rejected by the device.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. The vulnerability is due to improper input validation of the parameters of an HTTP request. An attacker could exploit this vulnerability by intercepting an HTTP request from a user. A successful exploit could allow the attacker to modify the HTTP request to cause the interface to redirect the user to a specific, malicious URL. This type of vulnerability is known as an open redirect attack and is used in phishing attacks that get users to unknowingly visit malicious sites.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access rule and access parts of the WebVPN portal that are supposed to be blocked. The vulnerability is due to insufficient validation of URLs when portal access rules are configured. An attacker could exploit this vulnerability by accessing certain URLs on the affected device.

A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied.

A vulnerability in the web application of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an unauthenticated, remote attacker to create arbitrary user accounts. The vulnerability is due to the lack of authorization controls in the web application. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to add user accounts to the configuration of an affected device. These accounts would not be administrator or operator accounts.

Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass the configured file policies on an affected system. The vulnerability is due to errors in how the Snort detection engine handles specific HTTP responses. An attacker could exploit this vulnerability by sending crafted HTTP packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured file policies and deliver a malicious payload to the protected network.

A vulnerability in the API of Cisco Application Services Engine Software could allow an unauthenticated, remote attacker to update event policies on an affected device. The vulnerability is due to insufficient authentication of users who modify policies on an affected device. An attacker could exploit this vulnerability by crafting a malicious HTTP request to contact an affected device. A successful exploit could allow the attacker to update event policies on the affected device.

A vulnerability in the web UI of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to write arbitrary entries to the log file on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to send incorrect information to the system log on the affected system.

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.

A vulnerability in the Enhanced Charging Service (ECS) functionality of Cisco ASR 5000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass the traffic classification rules on an affected device. The vulnerability is due to insufficient input validation of user traffic going through an affected device. An attacker could exploit this vulnerability by sending a malformed HTTP request to an affected device. A successful exploit could allow the attacker to bypass the traffic classification rules and potentially avoid being charged for traffic consumption.

A vulnerability in the zip decompression engine of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass content filters that are configured on an affected device. The vulnerability is due to improper handling of password-protected zip files. An attacker could exploit this vulnerability by sending a malicious file inside a crafted zip-compressed file to an affected device. A successful exploit could allow the attacker to bypass configured content filters that would normally drop the email.

A vulnerability in the web-based management interface of Cisco Unity Connection could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. This vulnerability is due to improper input validation of HTTP request parameters. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to redirect a user to a malicious web page.

A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform a carriage return line feed (CRLF) injection attack against a user. This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to arbitrarily inject log entries, manipulate the structure of log files, or obscure legitimate log events.

A vulnerability in the authentication service feature of Cisco AsyncOS Software for Cisco Secure Web Appliance could allow an unauthenticated, remote attacker to bypass authentication policy requirements. This vulnerability is due to improper validation of user-supplied authentication input in HTTP requests. An attacker could exploit this vulnerability by sending HTTP requests that contain specific authentication requests to an affected device. A successful exploit could allow the attacker to bypass policy enforcement on the device. There is no direct impact to the Cisco Secure Web Appliance. However, as a result of exploiting this vulnerability, an attacker could send HTTP requests that should be restricted through the device.

A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name.

A vulnerability in the web UI of Cisco HyperFlex Software could allow an unauthenticated, remote attacker to affect the integrity of a device via a clickjacking attack. The vulnerability is due to insufficient input validation of iFrame data in HTTP requests that are sent to an affected device. An attacker could exploit this vulnerability by sending crafted HTTP packets with malicious iFrame data. A successful exploit could allow the attacker to perform a clickjacking attack where the user is tricked into clicking a malicious link.

A vulnerability in the statistics collection service of Cisco HyperFlex Software could allow an unauthenticated, remote attacker to inject arbitrary values on an affected device. The vulnerability is due to insufficient authentication for the statistics collection service. An attacker could exploit this vulnerability by sending properly formatted data values to the statistics collection service of an affected device. A successful exploit could allow the attacker to cause the web interface statistics view to present invalid data to users.

A vulnerability in the web-based management interface of Cisco Crosswork Network Services Orchestrator (NSO) could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. This vulnerability is due to improper input validation of a parameter in an HTTP request. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to redirect a user to a malicious website.

A vulnerability in the web-based management interface of Cisco Expressway Series could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. This vulnerability is due to improper input validation of HTTP request parameters. An attacker could exploit this vulnerability by intercepting and modifying an HTTP request from a user. A successful exploit could allow the attacker to redirect the user to a malicious web page. Note: Cisco Expressway Series refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices.

A vulnerability in the data model interface (DMI) services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to access resources that should have been protected by a configured IPv4 access control list (ACL). This vulnerability is due to improper handling of error conditions when a successfully authorized device administrator updates an IPv4 ACL using the NETCONF or RESTCONF protocol, and the update would reorder access control entries (ACEs) in the updated ACL. An attacker could exploit this vulnerability by accessing resources that should have been protected across an affected device.

A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic.  This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials. SNMP with IPv6 ACL configurations is not affected. For more information, see the section of this advisory.

A vulnerability in the access control list (ACL) programming of Cisco Nexus 3550-F Switches could allow an unauthenticated, remote attacker to send traffic that should be blocked to the management interface of an affected device.  This vulnerability exists because ACL deny rules are not properly enforced at the time of device reboot. An attacker could exploit this vulnerability by attempting to send traffic to the management interface of an affected device. A successful exploit could allow the attacker to send traffic to the management interface of the affected device.

A vulnerability in the classic access control list (ACL) compression feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to incorrect destination address range encoding in the compression module of an ACL that is applied to an interface of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication .

A vulnerability in the web-based management interface of Cisco ECE could allow an unauthenticated, remote attacker to redirect a user to an undesired web page. This vulnerability is due to improper input validation of the URL parameters in an HTTP request that is sent to an affected system. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to cause the interface to redirect the user to a specific, malicious URL. This type of vulnerability is known as an open redirect and is used in phishing attacks that get users to unknowingly visit malicious sites.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the out of band (OOB) management interface IP table rule programming for Cisco Application Policy Infrastructure Controller (APIC) could allow an unauthenticated, remote attacker to bypass configured deny entries for specific IP ports. These IP ports would be permitted to the OOB management interface when, in fact, the packets should be dropped. The vulnerability is due to the configuration of specific IP table entries for which there is a programming logic error that results in the IP port being permitted. An attacker could exploit this vulnerability by sending traffic to the OOB management interface on the targeted device. A successful exploit could allow the attacker to bypass configured IP table rules to drop specific IP port traffic. The attacker has no control over the configuration of the device itself. This vulnerability affects Cisco APIC releases prior to the first fixed software Release 4.2(3j).

A vulnerability in the web-based management interface of Cisco Secure Network Analytics Manager and Cisco Secure Network Analytics Virtual Manager could allow an authenticated, remote attacker with valid administrative credentials to execute arbitrary commands as root on the underlying operating system. This vulnerability is due to insufficient input validation in specific fields of the web-based management interface. An attacker with valid administrative credentials could exploit this vulnerability by sending crafted input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. 

Cisco Linksys E4200 1.0.05 Build 7 routers contain a Local File Include Vulnerability which could allow remote attackers to obtain sensitive information or execute arbitrary code by sending a crafted URL request to the apply.cgi script using the submit_type parameter.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying operating system as root. The attacker does not require any valid credentials to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to obtain root privileges on an affected device.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to execute arbitrary code on the underlying operating system as root. The attacker does not require any valid credentials to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to obtain root privileges on an affected device.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system as root. This vulnerability is due to insufficient validation of user-supplied input. An attacker with valid credentials could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to execute commands as the root user. To exploit this vulnerability, the attacker must have valid high-privileged credentials.

A vulnerability in a specific API of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system as root. This vulnerability is due to insufficient validation of user-supplied input. An attacker with valid credentials could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to execute commands as the root user. To exploit this vulnerability, the attacker must have valid high-privileged credentials.

A vulnerability in the RADIUS subsystem implementation of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to inject arbitrary shell commands that are executed by the device.  This vulnerability is due to a lack of proper handling of user input during the authentication phase. An attacker could exploit this vulnerability by sending crafted input when entering credentials that will be authenticated at the configured RADIUS server. A successful exploit could allow the attacker to execute commands at a high privilege level. Note: For this vulnerability to be exploited, Cisco Secure FMC Software must be configured for RADIUS authentication for the web-based management interface, SSH management, or both.

Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2.

A vulnerability in the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to conduct a HTTP response splitting attack. The vulnerability is due to the failure of the application or its environment to properly sanitize input values. An attacker could exploit this vulnerability by injecting malicious HTTP headers, controlling the response body, or splitting the response into multiple responses. An exploit could allow the attacker to perform cross-site scripting attacks, cross-user defacement, web cache poisoning, and similar exploits. Cisco Bug IDs: CSCvf16705.

Cisco Video Communications Server (VCS) before X7.0.3 contains a command injection vulnerability which allows remote, authenticated attackers to execute arbitrary commands.

A vulnerability in Cisco IOS on Catalyst Switches and Nexus 9300 Series Switches could allow an unauthenticated, adjacent attacker to cause a Layer 2 network storm. More Information: CSCuu69332, CSCux07028. Known Affected Releases: 15.2(3)E. Known Fixed Releases: 12.2(50)SE4 12.2(50)SE5 12.2(50)SQ5 12.2(50)SQ6 12.2(50)SQ7 12.2(52)EY4 12.2(52)SE1 12.2(53)EX 12.2(53)SE 12.2(53)SE1 12.2(53)SE2 12.2(53)SG10 12.2(53)SG11 12.2(53)SG2 12.2(53)SG9 12.2(54)SG1 12.2(55)EX3 12.2(55)SE 12.2(55)SE1 12.2(55)SE10 12.2(55)SE2 12.2(55)SE3 12.2(55)SE4 12.2(55)SE5 12.2(55)SE6 12.2(55)SE7 12.2(55)SE8 12.2(55)SE9 12.2(58)EZ 12.2(58)SE1 12.2(58)SE2 12.2(60)EZ 12.2(60)EZ1 12.2(60)EZ2 12.2(60)EZ3 12.2(60)EZ4 12.2(60)EZ5 12.2(60)EZ6 12.2(60)EZ7 12.2(60)EZ8 15.0(1)EY2 15.0(1)SE 15.0(1)SE2 15.0(1)SE3 15.0(2)EA 15.0(2)EB 15.0(2)EC 15.0(2)ED 15.0(2)EH 15.0(2)EJ 15.0(2)EJ1 15.0(2)EK1 15.0(2)EX 15.0(2)EX1 15.0(2)EX3 15.0(2)EX4 15.0(2)EX5 15.0(2)EY 15.0(2)EY1 15.0(2)EY2 15.0(2)EZ 15.0(2)SE 15.0(2)SE1 15.0(2)SE2 15.0(2)SE3 15.0(2)SE4 15.0(2)SE5 15.0(2)SE6 15.0(2)SE7 15.0(2)SE9 15.0(2)SG10 15.0(2)SG3 15.0(2)SG6 15.0(2)SG7 15.0(2)SG8 15.0(2)SG9 15.0(2a)EX5 15.1(2)SG 15.1(2)SG1 15.1(2)SG2 15.1(2)SG3 15.1(2)SG4 15.1(2)SG5 15.1(2)SG6 15.2(1)E 15.2(1)E1 15.2(1)E2 15.2(1)E3 15.2(1)EY 15.2(2)E 15.2(2)E3 15.2(2b)E.

A vulnerability in the Cisco Webex Teams client for Windows could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. This vulnerability is due to improper restrictions on software logging features used by the application on Windows operating systems. An attacker could exploit this vulnerability by convincing a targeted user to visit a website designed to submit malicious input to the affected application. A successful exploit could allow the attacker to cause the application to modify files and execute arbitrary commands on the system with the privileges of the targeted user.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

A vulnerability in Cisco Unified Contact Center Express (UCCX) Software could allow an unauthenticated, remote attacker to conduct an HTTP response splitting attack. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected system. An attacker could exploit this vulnerability by convincing a user to follow a malicious link or by intercepting a user request on an affected device. A successful exploit could allow the attacker to perform cross-site scripting attacks, web cache poisoning, access sensitive browser-based information, and similar exploits.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

A vulnerability in the user interface of Cisco Webex Meetings and Cisco Webex Meetings Server Software could allow an authenticated, remote attacker to inject a hyperlink into a meeting invitation email. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by entering a URL into a field in the user interface. A successful exploit could allow the attacker to generate a Webex Meetings invitation email that contains a link to a destination of their choosing. Because this email is sent from a trusted source, the recipient may be more likely to click the link.

A vulnerability in the web framework of Cisco Small Business Managed Switches software could allow an unauthenticated, remote attacker to conduct an HTTP response splitting attack against a user of the web interface of an affected system. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected system. An attacker could exploit this vulnerability by convincing a user to follow a malicious link or by intercepting a user request and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. This vulnerability affects the following Cisco Small Business 300 and 500 Series Managed Switches: Cisco 350 Series Managed Switches, Cisco 350X Series Stackable Managed Switches, Cisco 550X Series Stackable Managed Switches, Cisco ESW2 Series Advanced Switches, Cisco Small Business 300 Series Managed Switches, Cisco Small Business 500 Series Stackable Managed Switches. Cisco Bug IDs: CSCvg29980.

A vulnerability in the web server of Cisco Umbrella could allow an unauthenticated, remote attacker to perform a carriage return line feed (CRLF) injection attack against a user of an affected service. The vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user to access a crafted URL. A successful exploit could allow the attacker to inject arbitrary HTTP headers into valid HTTP responses sent to the browser of the user.

Multiple vulnerabilities in the web UI of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to conduct cross-site scripting (XSS) attacks against users on an affected system. The vulnerabilities are due to insufficient validation of user-supplied input that is processed by the web UI. An attacker could exploit these vulnerabilities by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information on an affected system.

CRLF injection vulnerability in the HTTP Header Handler in Digital Broadband Delivery System in Cisco Headend System Release allows remote attackers to inject arbitrary HTTP headers, and conduct HTTP response splitting attacks or cross-site scripting (XSS) attacks, via a crafted request, aka Bug ID CSCur25580.

A vulnerability in the SSL certificate handling of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to execute commands on the underlying operating system as the root user. This vulnerability is due to insufficient validation of user-supplied input. An authenticated attacker could exploit this vulnerability by uploading a crafted certificate to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials.

A vulnerability in Cisco Webex Business Suite could allow an unauthenticated, remote attacker to inject arbitrary text into a user's browser. The vulnerability is due to improper validation of input. An attacker could exploit this vulnerability by convincing a targeted user to view a malicious URL. A successful exploit could allow the attacker to inject arbitrary text into the user's browser. The attacker could use the content injection to conduct spoofing attacks. Versions prior than 3.0.9 are affected.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to send a malicious packet to the management interface on an affected system and execute a command-injection exploit. The vulnerability is due to incorrect input validation of user-supplied data to the NX-API subsystem. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Note: NX-API is disabled by default. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd47415, CSCve03216, CSCve03224, CSCve03234.