Juniper Junos OS before 12.1X46-D45, 12.1X46-D50, 12.1X47 before 12.1X47-D35, 12.3X48 before 12.3X48-D30, 13.3 before 13.3R9-S1, 14.1 before 14.1R7, 14.2 before 14.2R6, 15.1 before 15.1F2-S5, 15.1F4 before 15.1F4-S2, 15.1R before 15.1R2-S3, 15.1 before 15.1R3, and 15.1X49 before 15.1X49-D40 allow remote attackers to cause a denial of service (kernel crash) via a crafted UDP packet destined to the interface IP address of a 64-bit OS device.

An improper input validation vulnerability in the Routing Protocol Daemon (RPD) service of Juniper Networks Junos OS allows an attacker to send a malformed RSVP packet when bidirectional LSPs are in use, which when received by an egress router crashes the RPD causing a Denial of Service (DoS) condition. Continued receipt of the packet will sustain the Denial of Service. This issue affects: Juniper Networks Junos OS: All versions prior to 17.3R3-S10 except 15.1X49-D240 for SRX series; 17.4 versions prior to 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R3-S3; 19.2 versions prior to 19.2R3; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3-S1; 20.1 versions prior to 20.1R1-S4, 20.1R2; 15.1X49 versions prior to 15.1X49-D240 on SRX Series. Juniper Networks Junos OS Evolved: 19.3 versions prior to 19.3R2-S5-EVO; 19.4 versions prior to 19.4R2-S2-EVO; 20.1 versions prior to 20.1R1-S4-EVO.

The PFE daemon in Juniper vSRX virtual firewalls with Junos OS before 15.1X49-D20 allows remote attackers to cause a denial of service via an unspecified connection request to the "host-OS."

Juniper chassis with Trio (Trinity) chipset line cards and Junos OS 13.3 before 13.3R8, 14.1 before 14.1R6, 14.2 before 14.2R5, and 15.1 before 15.1R2 allow remote attackers to cause a denial of service (MPC line card crash) via a crafted uBFD packet.

The L2TP packet processing functionality in Juniper Netscreen and ScreenOS Firewall products with ScreenOS before 6.3.0r13-dnd1, 6.3.0r14 through 6.3.0r18 before 6.3.0r18-dnc1, and 6.3.0r19 allows remote attackers to cause a denial of service via a crafted L2TP packet.

Juniper ScreenOS before 6.3.0r21, when ssh-pka is configured and enabled, allows remote attackers to cause a denial of service (system crash) or execute arbitrary code via crafted SSH negotiation.

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When a BGP update message is received over an established BGP session, and that message contains a specific, optional transitive attribute, this session will be torn down with an update message error. This issue cannot propagate beyond an affected system as the processing error occurs as soon as the update is received. This issue is exploitable remotely as the respective attribute can propagate through unaffected systems and intermediate AS (if any). Continuous receipt of a BGP update containing this attribute will create a sustained Denial of Service (DoS) condition. Some customers have experienced these BGP session flaps which prompted Juniper SIRT to release this advisory out of cycle before fixed releases are widely available as there is an effective workaround. This issue affects: Juniper Networks Junos OS 15.1R1 and later versions prior to 20.4R3-S8; 21.1 version 21.1R1 and later versions prior to 21.2R3-S6; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R3-S4; 22.1 versions prior to 22.1R3-S4; 22.2 versions prior to 22.2R3-S2; 22.3 versions prior to 22.3R2-S2, 22.3R3-S1; 22.4 versions prior to 22.4R2-S1, 22.4R3; 23.1 versions prior to 23.1R1-S1, 23.1R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S8-EVO; 21.1 version 21.1R1-EVO and later versions prior to 21.2R3-S6-EVO; 21.3 versions prior to 21.3R3-S5-EVO; 21.4 versions prior to 21.4R3-S4-EVO; 22.1 versions prior to 22.1R3-S4-EVO; 22.2 versions prior to 22.2R3-S2-EVO; 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO; 23.1 versions prior to 23.1R1-S1-EVO, 23.1R2-EVO.

Unspecified vulnerability in Juniper JUNOS 7.3 through 8.4 allows remote attackers to cause a denial of service (crash) via malformed BGP packets, possibly BGP UPDATE packets that trigger session flapping.

A Denial of Service vulnerability in J-Web service may allow a remote unauthenticated user to cause Denial of Service which may prevent other users to authenticate or to perform J-Web operations. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D60 on SRX Series; 15.1 versions prior to 15.1R7; 15.1F6; 15.1X49 versions prior to 15.1X49-D120 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D234 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D470, 15.1X53-D495 on NFX Series; 16.1 versions prior to 16.1R6; 16.2 versions prior to 16.2R2-S6, 16.2R3; 17.1 versions prior to 17.1R2-S6, 17.1R3; 17.2 versions prior to 17.2R3; 17.3 versions prior to 17.3R2. No other Juniper Networks products or platforms are affected by this issue.

Pulse Connect Secure (aka PCS and formerly Juniper PCS) PSC6000, PCS6500, and MAG PSC360 8.1 before 8.1r5, 8.0 before 8.0r13, 7.4 before 7.4r13.5, and 7.1 before 7.1r22.2 and PPS 5.1 before 5.1R5 and 5.0 before 5.0R13, when Hardware Acceleration is enabled, does not properly validate the Finished TLS handshake message, which makes it easier for remote attackers to conduct man-in-the-middle attacks via a crafted Finished message.

An error handling vulnerability in Routing Protocols Daemon (RPD) of Juniper Networks Junos OS allows an attacker to cause RPD to crash. Continued receipt of this malformed MPLS RSVP packet will cause a sustained Denial of Service condition. Affected releases are Juniper Networks Junos OS: 14.1 versions prior to 14.1R8-S5, 14.1R9; 14.1X53 versions prior to 14.1X53-D48 on QFX Switching; 14.2 versions prior to 14.1X53-D130 on QFabric System; 14.2 versions prior to 14.2R4. This issue does not affect versions of Junos OS before 14.1R1. Junos OS RSVP only supports IPv4. IPv6 is not affected by this issue. This issue require it to be received on an interface configured to receive this type of traffic.

Receipt of a specially crafted IPv6 exception packet may be able to trigger a kernel crash (vmcore), causing the device to reboot. The issue is specific to the processing of Broadband Edge (BBE) client route processing on MX Series subscriber management platforms, introduced by the Tomcat (Next Generation Subscriber Management) functionality in Junos OS 15.1. This issue affects no other platforms or configurations. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S2, 15.1R8 on MX Series; 16.1 versions prior to 16.1R4-S11, 16.1R7-S2, 16.1R8 on MX Series; 16.2 versions prior to 16.2R3 on MX Series; 17.1 versions prior to 17.1R2-S9, 17.1R3 on MX Series; 17.2 versions prior to 17.2R2-S6, 17.2R3 on MX Series; 17.3 versions prior to 17.3R2-S4, 17.3R3-S2, 17.3R4 on MX Series; 17.4 versions prior to 17.4R2 on MX Series; 18.1 versions prior to 18.1R2-S3, 18.1R3 on MX Series; 18.2 versions prior to 18.2R1-S1, 18.2R2 on MX Series.

A vulnerability in the Network Address Translation - Protocol Translation (NAT-PT) feature of Junos OS on SRX series devices may allow a certain valid IPv6 packet to crash the flowd daemon. Repeated crashes of the flowd daemon can result in an extended denial of service condition for the SRX device. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D72; 12.3X48 versions prior to 12.3X48-D55; 15.1X49 versions prior to 15.1X49-D90.

The receipt of a crafted BGP UPDATE can lead to a routing process daemon (RPD) crash and restart. Repeated receipt of the same crafted BGP UPDATE can result in an extended denial of service condition for the device. This issue only affects the specific versions of Junos OS listed within this advisory. Earlier releases are unaffected by this vulnerability. This crafted BGP UPDATE does not propagate to other BGP peers. Affected releases are Juniper Networks Junos OS: 16.1X65 versions prior to 16.1X65-D47; 17.2X75 versions prior to 17.2X75-D91, 17.2X75-D110; 17.3 versions prior to 17.3R1-S4, 17.3R2; 17.4 versions prior to 17.4R1-S3, 17.4R2.

Receipt of a specific MPLS packet may cause the routing protocol daemon (RPD) process to crash and restart or may lead to remote code execution. By continuously sending specific MPLS packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. This issue affects both IPv4 and IPv6. This issue can only be exploited from within the MPLS domain. End-users connected to the CE device cannot cause this crash. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 14.1X53 versions prior to 14.1X53-D130 on QFabric Series; 15.1F6 versions prior to 15.1F6-S10; 15.1 versions prior to 15.1R4-S9 15.1R7; 15.1X49 versions prior to 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S8 16.1R4-S8 16.1R5-S4 16.1R6-S4 16.1R7; 16.1X65 versions prior to 16.1X65-D48; 16.2 versions prior to 16.2R1-S6 16.2R3; 17.1 versions prior to 17.1R1-S7 17.1R2-S6 17.1R3; 17.2 versions prior to 17.2R1-S6 17.2R2-S3 17.2R3; 17.2X75 versions prior to 17.2X75-D100 17.2X75-D42 17.2X75-D91; 17.3 versions prior to 17.3R1-S4 17.3R2-S2 17.3R3; 17.4 versions prior to 17.4R1-S3 17.4R2 . No other Juniper Networks products or platforms are affected by this issue.

Receipt of a crafted or malformed RSVP PATH message may cause the routing protocol daemon (RPD) to hang or crash. When RPD is unavailable, routing updates cannot be processed which can lead to an extended network outage. If RSVP is not enabled on an interface, then the issue cannot be triggered via that interface. This issue only affects Juniper Networks Junos OS 16.1 versions prior to 16.1R3. This issue does not affect Junos releases prior to 16.1R1.

Junos OS routing protocol daemon (RPD) process may crash and restart or may lead to remote code execution while processing specific BGP NOTIFICATION messages. By continuously sending crafted BGP NOTIFICATION messages, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Due to design improvements, this issue does not affect Junos OS 16.1R1, and all subsequent releases. This issue only affects the receiving BGP device and is non-transitive in nature. Affected releases are Juniper Networks Junos OS: 15.1F5 versions starting from 15.1F5-S7 and all subsequent releases; 15.1F6 versions starting from 15.1F6-S3 and later releases prior to 15.1F6-S10; 15.1F7 versions 15.1 versions starting from 15.1R5 and later releases, including the Service Releases based on 15.1R5 and on 15.1R6 prior to 15.1R6-S6 and 15.1R7;

Junos OS may be impacted by the receipt of a malformed BGP UPDATE which can lead to a routing process daemon (rpd) crash and restart. Receipt of a repeated malformed BGP UPDATEs can result in an extended denial of service condition for the device. This malformed BGP UPDATE does not propagate to other BGP peers. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1F6-S10, 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D130 on SRX; 15.1X53 versions prior to 15.1X53-D66 on QFX10K; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S3, 16.1R6-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D47; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R2-S3, 17.1R3; 17.2 versions prior to 17.2R1-S3, 17.2R2-S1, 17.2R3; 17.2X75 versions prior to 17.2X75-D70; 13.2 versions above and including 13.2R1. Versions prior to 13.2R1 are not affected. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. No other Juniper Networks products or platforms are affected by this issue.

A Denial of Service vulnerability in the SIP application layer gateway (ALG) component of Junos OS based platforms allows an attacker to crash MS-PIC, MS-MIC, MS-MPC, MS-DPC or SRX flow daemon (flowd) process. This issue affects Junos OS devices with NAT or stateful firewall configuration in combination with the SIP ALG enabled. SIP ALG is enabled by default on SRX Series devices except for SRX-HE devices. SRX-HE devices have SIP ALG disabled by default. The status of ALGs in SRX device can be obtained by executing the command: show security alg status Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77; 12.3X48 versions prior to 12.3X48-D70; 15.1X49 versions prior to 15.1X49-D140; 15.1 versions prior to 15.1R4-S9, 15.1R7-S1; 15.1F6; 16.1 versions prior to 16.1R4-S9, 16.1R6-S1, 16.1R7; 16.2 versions prior to 16.2R2-S7, 16.2R3; 17.1 versions prior to 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.3 versions prior to 17.3R1-S5, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R2. No other Juniper Networks products or platforms are affected by this issue.

J-Web in Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D35, 12.1X46 before 12.1X46-D25, 12.1X47 before 12.1X47-D10, 12.3X48 before 12.3X48-D10, 12.2 before 12.2R9, 12.3 before 12.3R7, 13.2 before 13.2R6, 13.2X51 before 13.2X51-D20, 13.3 before 13.3R5, 14.1 before 14.1R3, 14.1X53 before 14.1X53-D10, and 14.2 before 14.2R1 allows remote attackers to conduct clickjacking attacks via an X-Frame-Options header.

A vulnerability in Junos OS SNMP MIB-II subagent daemon (mib2d) may allow a remote network based attacker to cause the mib2d process to crash resulting in a denial of service condition (DoS) for the SNMP subsystem. While a mib2d process crash can disrupt the network monitoring via SNMP, it does not impact routing, switching or firewall functionalities. SNMP is disabled by default on devices running Junos OS. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D76; 12.3 versions prior to 12.3R12-S7, 12.3R13; 12.3X48 versions prior to 12.3X48-D65; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D130; 15.1 versions prior to 15.1F2-S20, 15.1F6-S10, 15.1R7; 15.1X49 versions prior to 15.1X49-D130; 15.1X53 versions prior to 15.1X53-D233, 15.1X53-D471, 15.1X53-D472, 15.1X53-D58, 15.1X53-D66; 16.1 versions prior to 16.1R5-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D47; 16.1X70 versions prior to 16.1X70-D10; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R2-S6, 17.1R3;

The IPv6 Neighbor Discovery Protocol (NDP) implementation in (1) FreeBSD 6.3 through 7.1, (2) OpenBSD 4.2 and 4.3, (3) NetBSD, (4) Force10 FTOS before E7.7.1.1, (5) Juniper JUNOS, and (6) Wind River VxWorks 5.x through 6.4 does not validate the origin of Neighbor Discovery messages, which allows remote attackers to cause a denial of service (loss of connectivity) or read private network traffic via a spoofed message that modifies the Forward Information Base (FIB).

An improper use of a validation framework when processing incoming genuine BGP packets within Juniper Networks RPD (routing protocols process) daemon allows an attacker to crash RPD thereby causing a Denial of Service (DoS) condition. This framework requires these packets to be passed. By continuously sending any of these types of formatted genuine packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Authentication to the BGP peer is not required. This issue can be initiated or propagated through eBGP and iBGP and can impact devices in either modes of use as long as the devices are configured to support the compromised framework and a BGP path is activated or active. This issue affects: Juniper Networks Junos OS 16.1 versions 16.1R7-S6 and later versions prior to 16.1R7-S8; 17.3 versions 17.3R2-S5, 17.3R3-S6 and later versions prior to 17.3R3-S8; 17.4 versions 17.4R2-S7, 17.4R3 and later versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions 18.1R3-S7 and later versions prior to 18.1R3-S10; 18.2 versions 18.2R2-S6, 18.2R3-S2 and later versions prior to 18.2R2-S7, 18.2R3-S5; 18.2X75 versions 18.2X75-D12, 18.2X75-D32, 18.2X75-D33, 18.2X75-D51, 18.2X75-D60, 18.2X75-D411, 18.2X75-D420 and later versions prior to 18.2X75-D32, 18.2X75-D33, 18.2X75-D420, 18.2X75-D52, 18.2X75-D60, 18.2X75-D65, 18.2X75-D70;(*1) 18.3 versions 18.3R1-S6, 18.3R2-S3, 18.3R3 and later versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions 18.4R1-S5, 18.4R2-S4, 18.4R3 and later versions prior to 18.4R1-S7, 18.4R2-S5, 18.4R3-S3(*2); 19.1 versions 19.1R1-S3, 19.1R2 and later versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3-S2; 19.2 versions 19.2R1-S2, 19.2R2 and later versions prior to 19.2R1-S5, 19.2R2, 19.2R3; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2, 19.4R3; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affect Junos OS prior to 16.1R1. This issue affects IPv4 and IPv6 traffic.

A Denial of Service vulnerability exists in the Juniper Networks Junos OS JDHCPD daemon which allows an attacker to core the JDHCPD daemon by sending a crafted IPv6 packet to the system. This issue is limited to systems which receives IPv6 DHCP packets on a system configured for DHCP processing using the JDHCPD daemon. This issue does not affect IPv4 DHCP packet processing. Affected releases are Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S10 on EX Series; 12.3X48 versions prior to 12.3X48-D70 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on EX2200/VC, EX3200, EX3300/VC, EX4200, EX4300, EX4550/VC, EX4600, EX6200, EX8200/VC (XRE), QFX3500, QFX3600, QFX5100; 14.1X53 versions prior to 14.1X53-D130 on QFabric; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10000 Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5110, QFX5200; 15.1X53 versions prior to 15.1X53-D471 on NFX 150, NFX 250; 16.1 versions prior to 16.1R3-S9, 16.1R4-S8, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.2 versions prior to 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2.

On Juniper Networks PTX and QFX Series devices with packet sampling configured using tunnel-observation mpls-over-udp, sampling of a malformed packet can cause the Kernel Routing Table (KRT) queue to become stuck. KRT is the module within the Routing Process Daemon (RPD) that synchronized the routing tables with the forwarding tables in the kernel. This table is then synchronized to the Packet Forwarding Engine (PFE) via the KRT queue. Thus, when KRT queue become stuck, it can lead to unexpected packet forwarding issues. An administrator can monitor the following command to check if there is the KRT queue is stuck: user@device > show krt state ... Number of async queue entries: 65007 <--- this value keep on increasing. When this issue occurs, the following message might appear in the /var/log/messages: DATE DEVICE kernel: %KERN-3: rt_pfe_veto: Too many delayed route/nexthop unrefs. Op 2 err 55, rtsm_id 5:-1, msg type 2 DATE DEVICE kernel: %KERN-3: rt_pfe_veto: Memory usage of M_RTNEXTHOP type = (0) Max size possible for M_RTNEXTHOP type = (7297134592) Current delayed unref = (60000), Current unique delayed unref = (18420), Max delayed unref on this platform = (40000) Current delayed weight unref = (60000) Max delayed weight unref on this platform= (400000) curproc = rpd This issue affects Juniper Networks Junos OS on PTX/QFX Series: 17.2X75 versions prior to 17.2X75-D105; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.2X75 versions prior to 18.2X75-D420, 18.2X75-D53, 18.2X75-D65; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R1-S7, 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S2, 20.1R2. This issue does not affect Juniper Networks Junos OS prior to 18.1R1.

Receipt of a specific Draft-Rosen MVPN control packet may cause the routing protocol daemon (RPD) process to crash and restart or may lead to remote code execution. By continuously sending the same specific Draft-Rosen MVPN control packet, an attacker can repeatedly crash the RPD process causing a prolonged denial of service. This issue may occur when the Junos OS device is configured for Draft-Rosen multicast virtual private network (MVPN). The VPN is multicast-enabled and configured to use Protocol Independent Multicast (PIM) protocol within the VPN. This issue can only be exploited from the PE device within the MPLS domain which is capable of forwarding IP multicast traffic in core. End-users connected to the CE device cannot cause this crash. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D70 on SRX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1F6; 15.1X49 versions prior to 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.2 versions prior to 16.2R1-S6, 16.2R2-S6, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R2-S4, 17.2R3; 17.3 versions prior to 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.1 versions prior to 18.1R2. No other Juniper Networks products or platforms are affected by this issue.

The DHCPv6 Relay-Agent service, part of the Juniper Enhanced jdhcpd daemon shipped with Juniper Networks Junos OS has an Improper Input Validation vulnerability which will result in a Denial of Service (DoS) condition when a DHCPv6 client sends a specific DHPCv6 message allowing an attacker to potentially perform a Remote Code Execution (RCE) attack on the target device. Continuous receipt of the specific DHCPv6 client message will result in an extended Denial of Service (DoS) condition. If adjacent devices are also configured to relay DHCP packets, and are not affected by this issue and simply transparently forward unprocessed client DHCPv6 messages, then the attack vector can be a Network-based attack, instead of an Adjacent-device attack. No other DHCP services are affected. Receipt of the packet without configuration of the DHCPv6 Relay-Agent service, will not result in exploitability of this issue. This issue affects Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S15; 12.3X48 versions prior to 12.3X48-D95; 14.1X53 versions prior to 14.1X53-D53; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D200; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S7; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2; 17.2 versions prior to 17.2R3-S3; 17.2X75 versions prior to 17.2X75-D44; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R2-S6, 18.2R3-S2; 18.2X75 versions prior to 18.2X75-D12, 18.2X75-D33, 18.2X75-D435, 18.2X75-D60; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2; 19.3 versions prior to 19.3R2.

A privilege escalation vulnerability in Juniper Networks QFX10K Series, EX9200 Series, MX Series, and PTX Series with Next-Generation Routing Engine (NG-RE), allows a local authenticated high privileged user to access the underlying WRL host. This issue only affects QFX10K Series with NG-RE, EX9200 Series with NG-RE, MX Series with NG-RE and PTX Series with NG-RE; which uses vmhost. This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3; 17.2 versions prior to 17.2R1-S9, 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S4; 18.2 versions prior to 18.2R3; 18.2X75 versions prior to 18.2X75-D50; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2. To identify whether the device has NG-RE with vmhost, customer can run the following command: > show vmhost status Compute cluster: rainier-re-cc Compute Node: rainier-re-cn, Online If the "show vmhost status" is not supported, then the device does not have NG-RE with vmhost.

When SAML authentication is enabled, Juniper Networks Mist Cloud UI might incorrectly handle SAML responses, allowing a remote attacker to modify a valid SAML response without invalidating its cryptographic signature to bypass SAML authentication security controls. This issue affects all Juniper Networks Mist Cloud UI versions prior to September 2 2020.

When SAML authentication is enabled, Juniper Networks Mist Cloud UI might incorrectly handle child elements in SAML responses, allowing a remote attacker to modify a valid SAML response without invalidating its cryptographic signature to bypass SAML authentication security controls. This issue affects all Juniper Networks Mist Cloud UI versions prior to September 2 2020.

On Juniper Networks Junos OS and Junos OS Evolved devices, BGP session flapping can lead to a routing process daemon (RPD) crash and restart, limiting the attack surface to configured BGP peers. This issue only affects devices with BGP damping in combination with accepted-prefix-limit configuration. When the issue occurs the following messages will appear in the /var/log/messages: rpd[6046]: %DAEMON-4-BGP_PREFIX_THRESH_EXCEEDED: XXXX (External AS x): Configured maximum accepted prefix-limit threshold(1800) exceeded for inet6-unicast nlri: 1984 (instance master) rpd[6046]: %DAEMON-3-BGP_CEASE_PREFIX_LIMIT_EXCEEDED: 2001:x:x:x::2 (External AS x): Shutting down peer due to exceeding configured maximum accepted prefix-limit(2000) for inet6-unicast nlri: 2001 (instance master) rpd[6046]: %DAEMON-4: bgp_rt_maxprefixes_check_common:9284: NOTIFICATION sent to 2001:x:x:x::2 (External AS x): code 6 (Cease) subcode 1 (Maximum Number of Prefixes Reached) AFI: 2 SAFI: 1 prefix limit 2000 kernel: %KERN-5: mastership_relinquish_on_process_exit: RPD crashed on master RE. Sending SIGUSR2 to chassisd (5612:chassisd) to trigger RE switchover This issue affects: Juniper Networks Junos OS: 17.2R3-S3; 17.3 version 17.3R3-S3 and later versions, prior to 17.3R3-S8; 17.4 version 17.4R2-S4, 17.4R3 and later versions, prior to 17.4R2-S10, 17.4R3-S2; 18.1 version 18.1R3-S6 and later versions, prior to 18.1R3-S10; 18.2 version 18.2R3 and later versions, prior to 18.2R3-S4; 18.2X75 version 18.2X75-D50, 18.2X75-D60 and later versions, prior to 18.2X75-D53, 18.2X75-D65; 18.3 version 18.3R2 and later versions, prior to 18.3R2-S4, 18.3R3-S2; 18.4 version 18.4R2 and later versions, prior to 18.4R2-S5, 18.4R3-S2; 19.1 version 19.1R1 and later versions, prior to 19.1R2-S2, 19.1R3-S1; 19.2 version 19.2R1 and later versions, prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2; 20.1 versions prior to 20.1R1-S2, 20.1R2. Juniper Networks Junos OS Evolved prior to 20.1R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R3-S3.

The Juniper MX Series routers with Junos 13.3R3 through 13.3Rx before 13.3R6, 14.1 before 14.1R4, 14.1X50 before 14.1X50-D70, and 14.2 before 14.2R2, when configured as a broadband edge (BBE) router, allows remote attackers to cause a denial of service (jpppd crash and restart) by sending a crafted PAP Authenticate-Request after the PPPoE Discovery and LCP phase are complete.

Juniper Junos 11.4 before 11.4R12, 12.1 before 12.1R10, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R8, 12.3 before 12.3R7, 13.1 before 13.1R4, 13.2 before 13.2R4, 13.3 before 13.3R2, and 14.1 before 14.1R1, when Auto-RP is enabled, allows remote attackers to cause a denial of service (RDP routing process crash and restart) via a malformed PIM packet.

Juniper Junos 12.1X46 before 12.1X46-D20 and 12.1X47 before 12.1X47-D10 on SRX Series devices allows remote attackers to cause a denial of service (flowd crash) via a crafted SIP packet.

Juniper Junos 11.4 before 11.4R8, 12.1 before 12.1R5, 12.1X44 before 12.1X44-D20, 12.1X45 before 12.1X45-D15, 12.1X46 before 12.1X46-D10, and 12.1X47 before 12.1X47-D10 on SRX Series devices, allows remote attackers to cause a denial of service (flowd crash) via a malformed packet, related to translating IPv6 to IPv4.

Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D32, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, and 12.1X47 before 12.1X47-D10 on SRX Series devices, when NAT protocol translation from IPv4 to IPv6 is enabled, allows remote attackers to cause a denial of service (flowd hang or crash) via a crafted packet.

The Juniper Junos Pulse Secure Access Service (SSL VPN) devices with IVE OS 8.0 before 8.0r1, 7.4 before 7.4r5, and 7.1 before 7.1r18 allows remote attackers to conduct clickjacking attacks via unspecified vectors.

On Juniper Networks Junos OS and Junos OS Evolved devices, the receipt of a specific BGP UPDATE packet causes an internal counter to be incremented incorrectly, which over time can lead to the routing protocols process (RPD) crash and restart. This issue affects both IBGP and EBGP multihop deployment in IPv4 or IPv6 network. This issue affects: Juniper Networks Junos OS: 17.2X75 versions prior to 17.2X75-D105.19; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.2X75 versions prior to 18.2X75-D13, 18.2X75-D411.1, 18.2X75-D420.18, 18.2X75-D52.3, 18.2X75-D60; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S2, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Juniper Networks Junos OS Evolved: any releases prior to 20.1R2-EVO. This issue does not affect Juniper Networks Junos OS releases prior to 17.3R1.

The Enhanced Web Filtering (EWF) in Juniper Junos before 10.4R15, 11.4 before 11.4R9, 12.1 before 12.1R7, 12.1X44 before 12.1X44-D20, 12.1X45 before 12.1X45-D10, and 12.1X46 before 12.1X46-D10, as used in the SRX Series services gateways, allows remote attackers to cause a denial of service (flow daemon crash and restart) via a crafted URL.

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). When certain specific crafted BGP UPDATE messages are received over an established BGP session, one BGP session may be torn down with an UPDATE message error, or the issue may propagate beyond the local system which will remain non-impacted, but may affect one or more remote systems. This issue is exploitable remotely as the crafted UPDATE message can propagate through unaffected systems and intermediate BGP speakers. Continuous receipt of the crafted BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices. This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session. Improper Input Validation, Denial of Service vulnerability in Juniper Networks, Inc. Junos OS (BGP, rpd modules), Juniper Networks, Inc. Junos OS Evolved (BGP, rpd modules) allows Fuzzing.This issue affects  Junos OS:  * All versions before 20.4R3-S10, * from 21.1R1 through 21.*, * from 21.2 before 21.2R3-S5, * from 21.3 before 21.3R3-S5, * from 21.4 before 21.4R3-S7 (unaffected from 21.4R3-S5, affected from 21.4R3-S6) * from 22.1 before 22.1R3-S4, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3-S1, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2. Junos OS Evolved: * All versions before 20.4R3-S10-EVO, * from 21.2-EVO before 21.2R3-S7-EVO, * from 21.3-EVO before 21.3R3-S5-EVO, * from 21.4-EVO before 21.4R3-S5-EVO, * from 22.1-EVO before 22.1R3-S4-EVO, * from 22.2-EVO before 22.2R3-S3-EVO, * from 22.3-EVO before 22.3R3-S1-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO.

An Improper Input Validation vulnerability in the routing protocol daemon (rpd) of Juniper Networks allows an attacker to cause a Denial of Service (DoS )to the device upon receiving and processing a specific malformed ISO VPN BGP UPDATE packet. Continued receipt of this packet will cause a sustained Denial of Service condition. This issue affects: * Juniper Networks Junos OS: * All versions prior to 20.4R3-S6; * 21.1 versions prior to 21.1R3-S5; * 21.2 versions prior to 21.2R3-S4; * 21.3 versions prior to 21.3R3-S3; * 21.4 versions prior to 21.4R3-S3; * 22.1 versions prior to 22.1R2-S2, 22.1R3; * 22.2 versions prior to 22.2R2-S1, 22.2R3; * 22.3 versions prior to 22.3R1-S2, 22.3R2. Juniper Networks Junos OS Evolved: * All versions prior to 20.4R3-S6-EVO; * 21.1-EVO version 21.1R1-EVO and later versions prior to 21.2R3-S4-EVO; * 21.3-EVO versions prior to 21.3R3-S3-EVO; * 21.4-EVO versions prior to 21.4R3-S3-EVO; * 22.1-EVO versions prior to 22.1R3-EVO; * 22.2-EVO versions prior to 22.2R2-S1-EVO, 22.2R3-EVO; * 22.3-EVO versions prior to 22.3R1-S2-EVO, 22.3R2-EVO.

On Juniper Networks Junos OS devices configured with DHCPv6 relay enabled, receipt of a specific DHCPv6 packet might crash the jdhcpd daemon. The jdhcpd daemon automatically restarts without intervention, but continuous receipt of specific crafted DHCP messages will repeatedly crash jdhcpd, leading to an extended Denial of Service (DoS) condition. Only DHCPv6 packet can trigger this issue. DHCPv4 packet cannot trigger this issue. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2.

The Juniper SRX Series devices with Junos 11.4 before 11.4R12-S4, 12.1X44 before 12.1X44-D40, 12.1X45 before 12.1X45-D30, 12.1X46 before 12.1X46-D25, and 12.1X47 before 12.1X47-D10, when an Application Layer Gateway (ALG) is enabled, allows remote attackers to cause a denial of service (flowd crash) via a crafted packet.

The Juniper Networks NetScreen Firewall devices with ScreenOS before 6.3r17, when configured to use the internal DNS lookup client, allows remote attackers to cause a denial of service (crash and reboot) via a sequence of malformed packets to the device IP.

An input validation vulnerability exists in Juniper Networks Junos OS, allowing an attacker to crash the srxpfe process, causing a Denial of Service (DoS) through the use of specific maintenance commands. The srxpfe process restarts automatically, but continuous execution of the commands could lead to an extended Denial of Service condition. This issue only affects the SRX1500, SRX4100, SRX4200, NFX150, NFX250, and vSRX-based platforms. No other products or platforms are affected by this vulnerability. This issue affects Juniper Networks Junos OS: 15.1X49 versions prior to 15.1X49-D220 on SRX1500, SRX4100, SRX4200, vSRX; 17.4 versions prior to 17.4R3-S3 on SRX1500, SRX4100, SRX4200, vSRX; 18.1 versions prior to 18.1R3-S11 on SRX1500, SRX4100, SRX4200, vSRX, NFX150; 18.2 versions prior to 18.2R3-S5 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 19.1 versions prior to 19.1R3-S2 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250; 19.2 versions prior to 19.2R1-S5, 19.2R3 on SRX1500, SRX4100, SRX4200, vSRX, NFX150, NFX250. This issue does not affect Junos OS 19.3 or any subsequent version.