IBM UrbanCode Deploy (UCD) 7.0.5.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171249.

IBM Security Verify Privilege 11.6.25 could allow an unauthenticated actor to obtain sensitive information from the SOAP API. IBM X-Force ID: 287651.

IBM i Access Client Solutions 1.1.2 through 1.1.4 and 1.1.4.3 through 1.1.9.3 could allow an attacker to obtain a decryption key due to improper authority checks. IBM X-Force ID: 268270.

IBM OpenBMC FW1050.00 through FW1050.10 BMCWeb HTTPS server component could disclose sensitive URI content to an unauthorized actor that bypasses authentication channels. IBM X-ForceID: 290026.

IBM Cognos Analytics 11.0 and 11.1 could allow a remote attacker to obtain credentials from a user's browser via incorrect autocomplete settings in New Data Server Connection page. IBM X-Force ID: 172129.

IBM Security Verify Access Appliance 10.0.0 through 10.0.7 contains hard-coded credentials which it uses for its own inbound authentication that could be obtained by a malicious actor. IBM X-Force ID: 287317.

IBM Cloud Orchestrator 2.4 through 2.4.0.5 and 2.5 through 2.5.0.9 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 162260.

IBM Cognos Controller 11.0.0 through 11.0.1 FP3 and IBM Controller 11.1.0 Rich Client  uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Security Directory Integrator 7.2.0 and IBM Security Verify Directory Integrator 10.0.0 could disclose sensitive information about directory contents that could aid in further attacks against the system.

IBM Maximo Asset Management 7.6 could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 162887.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 158577.

The Network Address Translation (NAT) capability for Netfilter ("iptables") 1.2.6a and earlier leaks translated IP addresses in ICMP error messages.

IBM Security Guardium Big Data Intelligence 4.0 (SonarG) uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 161036.

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix refcnt handling in __inet_hash_connect(). syzbot reported a warning in sk_nulls_del_node_init_rcu(). The commit 66b60b0c8c4a ("dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().") tried to fix an issue that an unconnected socket occupies an ehash entry when bhash2 allocation fails. In such a case, we need to revert changes done by check_established(), which does not hold refcnt when inserting socket into ehash. So, to revert the change, we need to __sk_nulls_add_node_rcu() instead of sk_nulls_add_node_rcu(). Otherwise, sock_put() will cause refcnt underflow and leak the socket. [0]: WARNING: CPU: 0 PID: 23948 at include/net/sock.h:799 sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799 Modules linked in: CPU: 0 PID: 23948 Comm: syz-executor.2 Not tainted 6.8.0-rc6-syzkaller-00159-gc055fc00c07b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:sk_nulls_del_node_init_rcu+0x166/0x1a0 include/net/sock.h:799 Code: e8 7f 71 c6 f7 83 fb 02 7c 25 e8 35 6d c6 f7 4d 85 f6 0f 95 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 1b 6d c6 f7 90 <0f> 0b 90 eb b2 e8 10 6d c6 f7 4c 89 e7 be 04 00 00 00 e8 63 e7 d2 RSP: 0018:ffffc900032d7848 EFLAGS: 00010246 RAX: ffffffff89cd0035 RBX: 0000000000000001 RCX: 0000000000040000 RDX: ffffc90004de1000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: 1ffff1100439ac26 R08: ffffffff89ccffe3 R09: 1ffff1100439ac28 R10: dffffc0000000000 R11: ffffed100439ac29 R12: ffff888021cd6140 R13: dffffc0000000000 R14: ffff88802a9bf5c0 R15: ffff888021cd6130 FS: 00007f3b823f16c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3b823f0ff8 CR3: 000000004674a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __inet_hash_connect+0x140f/0x20b0 net/ipv4/inet_hashtables.c:1139 dccp_v6_connect+0xcb9/0x1480 net/dccp/ipv6.c:956 __inet_stream_connect+0x262/0xf30 net/ipv4/af_inet.c:678 inet_stream_connect+0x65/0xa0 net/ipv4/af_inet.c:749 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f3b8167dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3b823f10c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f3b817abf80 RCX: 00007f3b8167dda9 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007f3b823f1120 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f3b817abf80 R15: 00007ffd3beb57b8 </TASK>

IBM Rational Collaborative Lifecycle Management 6.0 through 6.0.6.1 could allow a remote attacker to traverse directories on the system. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 159883.

Sensitive information disclosure due to insufficient token field masking. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 35979.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 158092.

IBM Security Secret Server 10.7 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 170045.

IBM WebSphere Application Server 7.0, 8.0, 8.5, and 9.0 Admin Console could allow a remote attacker to obtain sensitive information when a specially crafted url causes a stack trace to be dumped. IBM X-Force ID: 160202.

Sensitive information disclosure due to cleartext storage of sensitive information in memory. The following products are affected: Acronis Cyber Protect 15 (Linux, macOS, Windows) before build 35979.

IBM Intelligent Operations Center (IOC) 5.1.0 through 5.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 157012.

IBM QRadar Suite Products 1.10.12.0 through 1.10.18.0 and IBM Cloud Pak for Security 1.10.0.0 through 1.10.11.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 280781.

IBM WebSphere Application Server Liberty 17.0.0.3 through 24.0.0.4 is vulnerable to a denial of service, caused by sending a specially crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. IBM X-Force ID: 280400.

IBM API Connect 5.0.0.0 through 5.0.8.6 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 159944.

IBM QRadar SIEM 7.2.8 WinCollect could allow an attacker to obtain sensitive information by spoofing a trusted entity using man in the middle techniques due to not validating or incorrectly validating a certificate. IBM X-Force ID: 160072.

IBM Semeru Runtime 8.0.302.0 through 8.0.392.0, 11.0.12.0 through 11.0.21.0, 17.0.1.0 - 17.0.9.0, and 21.0.1.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 281222.

Sensitive information disclosure due to spell-jacking. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 35979.

IBM Security Key Lifecycle Manager 3.0 and 3.0.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166626.

IBM DevOps Velocity 5.0.0 and IBM UrbanCode Velocity 4.0.0 through 4.0. 25 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Storage Defender - Resiliency Service 2.0.0 through 2.0.12 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Security Guardium Big Data Intelligence (SonarG) 4.0 stores sensitive information in cleartext within a resource that might be accessible to another control sphere. IBM X-Force ID: 1610141.

IBM Sterling B2B Integrator 5.2.0.1 through 6.0.0.0 Standard Edition could allow highly sensitive information to be transmitted in plain text. An attacker could obtain this information using man in the middle techniques. IBM X-ForceID: 157008.

A flaw was found within the parsing of extended attributes in the kernel ksmbd module. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this to disclose sensitive information on affected installations of Linux. Only systems with ksmbd enabled are vulnerable to this CVE.

IBM API Connect V5.0.0.0 through 5.0.8.7iFix3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 165958.

IBM Cloud CLI 0.6.0 through 0.16.1 windows installers are signed using SHA1 certificate. An attacker might be able to exploit the weak algorithm to generate a installer with malicious software inside. IBM X-Force ID: 162773.

IBM Cloud Pak for Security (CP4S) 1.4.0.0, 1.5.0.0, 1.5.0.1, 1.6.0.0, and 1.6.0.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 199235.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 discloses sensitive information in source code that could be used in further attacks against the system. IBM X-Force ID: 196185.

IBM Security Guardium 11.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 196280.

IBM QRadar SIEM 7.3 and 7.4 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 196074.

IBM QRadar Advisor With Watson App 1.1 through 2.5 as used on IBM QRadar SIEM 7.4 could allow a remote user to obtain sensitive information from HTTP requests that could aid in further attacks against the system. IBM X-Force ID: 195712.

IBM Security Verify Bridge contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 196618.

IBM Cloud Pak for Applications 4.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 195361.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 196188.

IBM WebSphere Application Server 8.0, 8.5, and 9.0 could allow a remote attacker to traverse directories. An attacker could send a specially-crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 194883.

Sensitive information leak through log files. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 35979.

Broadcom RAID Controller Web server (nginx) is serving private server-side files without any authentication on Linux

IBM License Metric Tool 9.2 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 266893.

IBM SAN Volume Controller, IBM Storwize, IBM FlashSystem and IBM Storage Virtualize 8.3 products use default passwords for a privileged user. IBM X-Force ID: 266874.

IBM Storage Virtualize vSphere Remote Plug-in 1.0 and 1.1 could allow a remote user to obtain sensitive credential information after deployment.

A sensitive information disclosure vulnerability in Tableau Server 10.5, 2018.x, 2019.x, 2020.x released before June 26, 2020, could allow access to sensitive information in log files.