SonicWall Email Security Virtual Appliance version 10.0.9 and earlier versions contain a default username and a password that is used at initial setup. An attacker could exploit this transitional/temporary user account from the trusted domain to access the Virtual Appliance remotely only when the device is freshly installed and not connected to Mysonicwall.

A vulnerability in Cisco Smart Software Manager Satellite could allow an authenticated, local attacker to access sensitive information on an affected system. The vulnerability is due to insufficient protection of static credentials in the affected software. An attacker could exploit this vulnerability by gaining access to the static credential that is stored on the local device. A successful exploit could allow the attacker to view static credentials, which the attacker could use to carry out further attacks.

A CWE-321: Use of hard-coded cryptographic key stored in cleartext vulnerability exists in Easergy Builder V1.4.7.2 and prior which could allow an attacker to decrypt a password.

IBM Spectrum LSF 10.1 and IBM Spectrum LSF Suite 10.2 could allow a user on the local network who has privileges to submit LSF jobs to execute arbitrary commands. IBM X-Force ID: 192586.

IBM QRadar SIEM 7.3 and 7.4 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 191748.

IBM Security Guardium 10.6, 11.0, and 11.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174851.

A vulnerability was found in GE Voluson S8. It has been rated as critical. This issue affects the Service Browser which itroduces hard-coded credentials. Attacking locally is a requirement. It is recommended to change the configuration settings.

An issue was discovered in MB CONNECT LINE mymbCONNECT24 and mbCONNECT24 through 2.6.2. The software uses a secure password for database access, but this password is shared across instances.

An issue was discovered on V-SOL V1600D4L V1.01.49 and V1600D-MINI V1.01.48 OLT devices. A hardcoded RSA private key (specific to V1600D4L and V1600D-MINI) is contained in the firmware images.

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. A hardcoded RSA private key (specific to V1600D, V1600G1, and V1600G2) is contained in the firmware images.

In SOOIL Developments Co., Ltd Diabecare RS, AnyDana-i and AnyDana-A, a hard-coded physician PIN in the physician menu of the insulin pump allows attackers with physical access to change insulin therapy settings.

An issue was discovered in SolarWinds N-Central 12.3.0.670. Hard-coded Credentials exist by default for local user accounts named support@n-able.com and nableadmin@n-able.com. These allow logins to the N-Central Administrative Console (NAC) and/or the regular web interface.

An attacker with local network access can obtain a fixed cryptography key which may allow for further compromise of Reolink P2P cameras outside of local network access

Unisys Stealth(core) before 4.0.134 stores passwords in a recoverable format. Therefore, a search of Enterprise Manager can potentially reveal credentials.

An issue was discovered on Victure WR1200 devices through 1.0.3. The root SSH password never gets updated from its default value of admin. This enables an attacker to gain control of the device through SSH (regardless of whether the admin password was changed on the web interface).

GE UR bootloader binary Version 7.00, 7.01 and 7.02 included unused hardcoded credentials. Additionally, a user with physical access to the UR IED can interrupt the boot sequence by rebooting the UR.

A Use of Hardcoded Credentials vulnerability exists in AquaView versions 1.60, 7.x, and 8.x that could allow an authenticated local attacker to manipulate users and system settings.

A weak default administrator password for the web interface and serial port was reported in some Lenovo Personal Cloud Storage devices that could allow unauthorized device access to an attacker with physical or local network access.

A weak default password for the serial port was reported in some Lenovo Personal Cloud Storage devices that could allow unauthorized device access to an attacker with physical access.

An issue was discovered in Luna Simo PPR1.180610.011/202001031830. It mishandles software updates such that local third-party apps can provide a spoofed software update file that contains an arbitrary shell script and arbitrary ARM binary, where both will be executed as the root user with an SELinux domain named osi. To exploit this vulnerability, a local third-party app needs to have write access to external storage to write the spoofed update at the expected path. The vulnerable system binary (i.e., /system/bin/osi_bin) does not perform any authentication of the update file beyond ensuring that it is encrypted with an AES key (that is hard-coded in the vulnerable system binary). Processes executing with the osi SELinux domain can programmatically perform the following actions: install apps, grant runtime permissions to apps (including permissions with protection levels of dangerous and development), access extensive Personally Identifiable Information (PII) using the programmatically grant permissions, uninstall apps, set the default launcher app to a malicious launcher app that spoofs other apps, set a network proxy to intercept network traffic, unload kernel modules, set the default keyboard to a keyboard that has keylogging functionality, examine notification contents, send text messages, and more. The spoofed update can optionally contain an arbitrary ARM binary that will be locally stored in internal storage and executed at system startup to achieve persistent code execution as the root user with the osi SELinux domain. This ARM binary will continue to execute at startup even if the app that provided the spoofed update is uninstalled.

In the Broadcom Nexus firmware, there is an insecure default password. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android SoCAndroid ID: A-171413483

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 stores usernames, passwords, and other configuration options in the file generated via the "export configuration" feature. The configuration file is encrypted using the awenc binary. The same binary can be used to decrypt any configuration file since all the encryption logic is hard coded. A local attacker can use this vulnerability to gain access to devices username and passwords.

IBM BigFix Remote Control before 9.1.3 allows local users to discover hardcoded credentials via unspecified vectors.

Static credentials exist in the PostgreSQL data used in ManageEngine Access Manager Plus (AMP) build 4309, ManageEngine Password Manager Pro, and ManageEngine PAM360. These credentials could allow a malicious actor to modify configuration data that would escalate their permissions from that of a low-privileged user to an Administrative user.

An issue was discovered on TK-Star Q90 Junior GPS horloge 3.1042.9.8656 devices. When using the device at initial setup, a default password is used (123456) for administrative purposes. There is no prompt to change this password. Note that this password can be used in combination with CVE-2019-20470.

Android App 'Wolt Delivery: Food and more' version 4.27.2 and earlier uses hard-coded credentials (API key for an external service), which may allow a local attacker to obtain the hard-coded API key via reverse-engineering the application binary.

IBM Storage Defender - Resiliency Service 2.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 278749.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.951, Application prior to 20.0.2368 (VA and SaaS deployments) contain an undocumented local user account named ubuntu with a preset password and a sudoers entry granting that account passwordless root privileges (ubuntu ALL=(ALL) NOPASSWD: ALL). Anyone who knows the hardcoded password can obtain root privileges via local console or equivalent administrative access, enabling local privilege escalation. This vulnerability has been identified by the vendor as: V-2024-010 — Hardcoded Linux Password. NOTE: The patch for this vulnerability is reported to be incomplete: /etc/shadow was remediated but /etc/sudoers remains vulnerable.

Brocade SANnav versions before v2.0 use a hard-coded password, which could allow local authenticated attackers to access a back-end database and gain privileges.

CWE-798: Use of hard-coded credentials vulnerability exists that could cause local privilege escalation when logged in as a non-administrative user.

The centralized management feature for Utimaco Safeguard stores hard-coded cryptographic keys in executable programs for encrypted configuration files, which allows attackers to recover the keys from the configuration files and decrypt the disk drive.

The vulnerability allows an unprivileged (untrusted) third- party application to arbitrary modify the server settings of the Android Client application, inducing it to connect to an attacker - controlled malicious server.This is possible by forging a valid broadcast intent encrypted with a hardcoded RSA key pair

NMIS/BioDose software V22.02 and previous versions contain executable binaries with plain text hard-coded passwords. These hard-coded passwords could allow unauthorized access to both the application and database.

Penta Security Systems Inc WAPPLES v6.0 r3 4.10-hotfix1 allows attackers to escalate privileges via overwriting files using SUID flagged executables.

A use of hard-coded credentials vulnerability [CWE-798] in FortiTester 2.3.0 through 7.2.3 may allow an attacker who managed to get a shell on the device to access the database via shell commands.

A improper authentication vulnerability in Fortinet FortiSIEM before 6.5.0 allows a local attacker with CLI access to perform operations on the Glassfish server directly via a hardcoded password.

A use of hard-coded cryptographic key vulnerability [CWE-321] in the registration mechanism of FortiEDR collectors versions 5.0.2, 5.0.1, 5.0.0, 4.0.0 may allow a local attacker to disable and uninstall the collectors from the end-points within the same deployment.

Precor touchscreen console P62, P80, and P82 could allow a remote attacker (within the local network) to bypass security restrictions, and access the service menu, because there is a hard-coded service code.

Due to the implementation of "deriveVaultKey", prior to version 7.10, the generated vault key would always have the last 16 bytes predetermined to be "arfoobarfoobarfo". This issue happens because "deriveVaultKey" calls "retrieveCloudKey" (which will always return "foobarfoobarfoobarfoobarfoobarfo" as the key), and then merges the 32byte randomly generated key with this key (by takeing 16bytes from each, see "mergeKeys"). This makes the key a lot weaker. This issue does not persist in devices that were initialized on/after version 7.10, but devices that were initialized before that and updated to a newer version still have this issue. Roll an update that enforces the full 32bytes key usage.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices have 0644 /var/etc/shadow (aka the /etc/shadow symlink target) permissions.

The Cisco AMP For Endpoints application allows an authenticated, local attacker to access a static key value stored in the local application software. The vulnerability is due to the use of a static key value stored in the application used to encrypt the connector protection password. An attacker could exploit this vulnerability by gaining local, administrative access to a Windows host and stopping the Cisco AMP for Endpoints service. Cisco Bug IDs: CSCvg42904.

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05.11 (only with activated debug support)), CP-8050 MASTER MODULE (All versions < CPCI85 V05.11 (only with activated debug support)). The affected devices contain a hard-coded ID in the SSH `authorized_keys` configuration file. An attacker with knowledge of the corresponding private key could login to the device via SSH. Only devices with activated debug support are affected.

Windows Local Security Authority (LSA) Elevation of Privilege Vulnerability