Qualys discovered that if unsanitized input was used with the library Modules::ScanDeps, before version 1.36 a local attacker could possibly execute arbitrary shell commands by open()ing a "pesky pipe" (such as passing "commands|" as a filename) or by passing arbitrary strings to eval().

The issue occurs because tagName user input is formatted inside the exec function is executed without any checks.

OS Command Injection vulnerability in the wirelessConnect handler of Abode iota All-In-One Security Kit allows an attacker to inject commands and gain root access. This issue affects: Abode iota All-In-One Security Kit versions prior to 1.0.2.23_6.9V_dev_t2_homekit_RF_2.0.19_s2_kvsABODE oz.

A vulnerability classified as critical has been found in KylinSoft kylin-system-updater up to 2.0.5.16-0k2.33. Affected is an unknown function of the file /usr/share/kylin-system-updater/SystemUpdater/UpgradeStrategiesDbus.py of the component com.kylin.systemupgrade Service. The manipulation of the argument SetDownloadspeedMax leads to os command injection. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-248940. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

There is an OS command injection vulnerability in Crestron AM-300 firmware version 1.4499.00018 which may enable a user of a limited-access SSH session to escalate their privileges to root-level access.

The Management I/O (MIO) component in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows local users to execute arbitrary OS commands as root via crafted CLI input, aka Bug ID CSCux10578.

Amaze File Manager before 3.5.1 allows attackers to obtain root privileges via shell metacharacters in a symbolic link.

An improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78 ] in FortiManager 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions, FortiAnalyzer 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions and FortiADC  7.1.0, 7.0.0 through 7.0.3, 6.2 all versions, 6.1 all versions, 6.0 all versions management interface may allow an authenticated attacker with at least READ permissions on system settings to execute arbitrary commands on the underlying shell due to an unsafe usage of the wordexp function.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to inject a command to the underlying operating system that will execute with root privileges upon the next reboot of the device. The authenticated user must have privileged EXEC permissions on the device. The vulnerability is due to insufficient protection of values passed to a script that executes during device startup. An attacker could exploit this vulnerability by writing values to a specific file. A successful exploit could allow the attacker to execute commands with root privileges each time the affected device is restarted.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

An issue was discovered in ClusterLabs crmsh through 4.2.1. Local attackers able to call "crm history" (when "crm" is run) were able to execute commands via shell code injection to the crm history commandline, potentially allowing escalation of privileges.

A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials on an affected device.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A command injection issue in dji_sys in DJI Mavic 2 Remote Controller before firmware version 01.00.0510 allows for code execution via a malicious firmware upgrade packet.

Dell EMC PowerStore versions prior to 1.0.3.0.5.006 contain an OS Command Injection vulnerability in PowerStore X environment . A locally authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS command on the PowerStore underlying OS. Exploiting may lead to a system take over by an attacker.

A vulnerability in the CLI parsers of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an authenticated, local attacker to execute arbitrary shell commands on the Virtual Device Server (VDS) of an affected device. The attacker must have valid user credentials at privilege level 15. The vulnerability is due to insufficient validation of arguments that are passed to specific VDS-related CLI commands. An attacker could exploit this vulnerability by authenticating to the targeted device and including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands in the context of the Linux shell of VDS with the privileges of the root user.

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exists because the affected software does not properly sanitize user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying certain CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, which could result in a complete system compromise.

In Apache SpamAssassin before 3.4.3, nefarious CF files can be configured to run system commands without any output or errors. With this, exploits can be injected in a number of scenarios. In addition to upgrading to SA 3.4.3, we recommend that users should only use update channels or 3rd party .cf files from trusted places.

The CLI command parser on Cisco RV110W, RV130W, and RV215W devices allows local users to execute arbitrary shell commands as an administrator via crafted parameters, aka Bug IDs CSCuv90134, CSCux58161, and CSCux73567.

A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

Network Manager VPNC plugin (aka networkmanager-vpnc) before version 1.2.6 is vulnerable to a privilege escalation attack. A new line character can be used to inject a Password helper parameter into the configuration data passed to VPNC, allowing an attacker to execute arbitrary commands as root.

A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the processing of boot options of specific Cisco IOS XE Software switches could allow an authenticated, local attacker with root shell access to the underlying operating system (OS) to conduct a command injection attack during device boot. This vulnerability is due to insufficient input validation checks while processing boot options. An attacker could exploit this vulnerability by modifying device boot options to execute attacker-provided code. A successful exploit may allow an attacker to bypass the Secure Boot process and execute malicious code on an affected device with root-level privileges.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the CLI of Cisco SD-WAN Solution software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions with SINEMA Remote Connect Edge Client installed). Affected devices do not properly sanitize configuration parameters. This could allow a non-privileged local attacker to execute root commands on the device.

An issue was discovered in EMC RecoverPoint for Virtual Machines versions prior to 5.1.1, EMC RecoverPoint version 5.1.0.0, and EMC RecoverPoint versions prior to 5.0.1.3. Command injection vulnerability in Boxmgmt CLI may allow a malicious user with boxmgmt privileges to bypass Boxmgmt CLI and run arbitrary commands with root privileges.

Dell EMC PowerScale OneFS versions 8.1.0 - 9.1.0 contain an improper input validation vulnerability. A user with the ISI_PRIV_CLUSTER privilege may exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application.

The QCMAP_CLI utility in the Qualcomm QCMAP software suite prior to versions released in October 2020 uses a system() call without validating the input, while handling a SetGatewayUrl() request. A local attacker with shell access can pass shell metacharacters and run arbitrary commands. If QCMAP_CLI can be run via sudo or setuid, this also allows elevating privileges to root. This version of QCMAP is used in many kinds of networking devices, primarily mobile hotspots and LTE routers.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exist because the affected software improperly sanitizes command arguments, failing to prevent access to certain internal data structures on an affected device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain custom arguments. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series Aggregation Services Routers could allow an authenticated, local attacker to perform a command injection attack on an affected system. The vulnerability is due to insufficient validation of commands that are supplied to certain configurations in the CLI of the affected operating system. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable CLI command for an affected system. A successful exploit could allow the attacker to insert and execute arbitrary commands in the CLI of the affected system. To exploit this vulnerability, the attacker would need to authenticate to an affected system by using valid administrator credentials. Cisco Bug IDs: CSCvg29441.

A vulnerability in the Sourcefire tunnel control channel protocol in Cisco Firepower System Software running on Cisco Firepower Threat Defense (FTD) sensors could allow an authenticated, local attacker to execute specific CLI commands with root privileges on the Cisco Firepower Management Center (FMC), or through Cisco FMC on other Firepower sensors and devices that are controlled by the same Cisco FMC. To send the commands, the attacker must have root privileges for at least one affected sensor or the Cisco FMC. The vulnerability exists because the affected software performs insufficient checks for certain CLI commands, if the commands are executed via a Sourcefire tunnel connection. An attacker could exploit this vulnerability by authenticating with root privileges to a Firepower sensor or Cisco FMC, and then sending specific CLI commands to the Cisco FMC or through the Cisco FMC to another Firepower sensor via the Sourcefire tunnel connection. A successful exploit could allow the attacker to modify device configurations or delete files on the device that is running Cisco FMC Software or on any Firepower device that is managed by Cisco FMC.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent modifications to the underlying Linux filesystem on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

Nagios XI 5.5.6 allows local authenticated attackers to escalate privileges to root via Autodiscover_new.php.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to inject arbitrary commands into the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell of an affected device and execute commands with root privileges on the device. The vulnerabilities exist because the affected software does not sufficiently sanitize command arguments before passing commands to the Linux shell for execution. An attacker could exploit these vulnerabilities by submitting a malicious CLI command to the affected software. A successful exploit could allow the attacker to break from the CLI of the affected software, which could allow the attacker to gain access to the underlying Linux shell on an affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuz03145, CSCuz56419, CSCva31971, CSCvb09542.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

A vulnerability in the CLI of the Cisco StarOS operating system for Cisco ASR 5000 Series Aggregation Services Routers could allow an authenticated, local attacker to execute arbitrary commands with root privileges on an affected operating system. The vulnerability is due to insufficient validation of user-supplied input by the affected operating system. An attacker could exploit this vulnerability by authenticating to an affected system and injecting malicious arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. Cisco Bug IDs: CSCvg38807.

A vulnerability in the command-line interface (CLI) in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.

A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663.

A vulnerability in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerability is due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has privileged EXEC mode (privilege level 15) access to an affected device could exploit this vulnerability on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCuv91356.

Cisco Wireless LAN Controller (WLC) devices with software 7.0(240.0) allow local users to execute arbitrary OS commands in a privileged context via crafted CLI commands, aka Bug ID CSCuj39474.

The boot implementation on Cisco ASR 5000 and 5500 devices with software 14.0 allows local users to execute arbitrary Linux commands by leveraging administrative privileges for storage of these commands in a Compact Flash (CF) file, aka Bug ID CSCuu75278.

Dell Unity, version(s) 5.5 and prior, contain(s) an OS Command Injection Vulnerability in its svc_nfssupport utility. An authenticated attacker could potentially exploit this vulnerability, escaping the restricted shell and execute arbitrary operating system commands with root privileges.

The diagnostics subsystem in the administrative web interface on Cisco Virtualization Experience (aka VXC) Client 6215 devices with firmware 11.2(27.4) allows local users to gain privileges for OS command execution via a crafted option value, aka Bug ID CSCug54412.

The Manager component in Cisco Unified Computing System (UCS) 2.2(3b) on B Blade Server devices allows local users to gain privileges for executing arbitrary CLI commands by leveraging access to the subordinate fabric interconnect, aka Bug ID CSCut32778.