EuroTel ETL3100 versions v01c01 and v01x37 does not limit the number of attempts to guess administrative credentials in remote password attacks to gain full control of the system.

Due to insufficient server-side login-attempt limit enforcement, a vulnerability in /account/login in Huntflow Enterprise before 3.10.14 could allow an unauthenticated, remote user to perform multiple login attempts for brute-force password guessing.

The Theme My Login 2FA WordPress plugin before 1.2 does not rate limit 2FA validation attempts, which may allow an attacker to brute-force all possibilities, which shouldn't be too long, as the 2FA codes are 6 digits.

Sielco PolyEco1000 uses a weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

OpenStack Keystone 10.x through 16.x before 16.0.2, 17.x before 17.0.1, 18.x before 18.0.1, and 19.x before 19.0.1 allows information disclosure during account locking (related to PCI DSS features). By guessing the name of an account and failing to authenticate multiple times, any unauthenticated actor could both confirm the account exists and obtain that account's corresponding UUID, which might be leveraged for other unrelated attacks. All deployments enabling security_compliance.lockout_failure_attempts are affected.

A CWE-307: Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow unauthorized access when an attacker uses brute force. Affected Products: Wiser Smart, EER21000 & EER21001 (V4.5 and prior)

An issue was discovered in Fimer Aurora Vision before 2.97.10. The response to a failed login attempt discloses whether the username or password is wrong, helping an attacker to enumerate usernames. This can make a brute-force attack easier.

DoraCMS v2.1.8 was discovered to re-use the same code for verification of valid usernames and passwords. This vulnerability allows attackers to gain access to the application via a bruteforce attack.

Nextcloud Server provides data storage for Nextcloud, an open source cloud platform. In Nextcloud Server prior to versions 26.0.9 and 27.1.4; as well as Nextcloud Enterprise Server prior to versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4; when a (reverse) proxy is configured as trusted proxy the server could be tricked into reading a wrong remote address for an attacker, allowing them executing authentication attempts than intended. Nextcloud Server versions 26.0.9 and 27.1.4 and Nextcloud Enterprise Server versions 23.0.12.13, 24.0.12.9, 25.0.13.4, 26.0.9, and 27.1.4 contain a patch for this issue. No known workarounds are available.

In Discourse 2.7.0 through beta1, a rate-limit bypass leads to a bypass of the 2FA requirement for certain forms.

OpenClinic GA versions 5.09.02 and 5.89.05b may allow an attacker to bypass the system’s account lockout protection, which may allow brute force password attacks.

kodbox 1.46.01 has a security flaw that enables user enumeration. This problem is present on the login page, where an attacker can identify valid users based on varying response messages, potentially paving the way for a brute force attack.

IBM WebSphere Application Server 7.0, 8.0, 8.5, 9.0 and Liberty 17.0.0.3 through 21.0.0.9 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 205202.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It has brute-force attack mishandling because the CAS service lacks a limit on login failures.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers access to /tmp path which contains some sensitive data (e.g. device serial number). Having those info, a possible loginId can be self-calculated in a brute force attack against BMX interface. This is usable and part of an attack chain to gain SSH root access.

The Web UI component of Mitel MiVoice 6800 and 6900 series SIP Phones with firmware before 5.1.0.SP5 could allow an unauthenticated attacker to expose sensitive information due to improper memory handling during failed login attempts.

An issue was discovered in Stormshield SNS through 4.2.1. A brute-force attack can occur.

An issue was discovered on Samsung mobile devices with O(8.x) (with TEEGRIS) software. The Gatekeeper Trustlet allows a brute-force attack on user credentials. The Samsung ID is SVE-2020-16908 (June 2020).

CA eHealth Performance Manager through 6.3.2.12 is affected by Improper Restriction of Excessive Authentication Attempts. An attacker is able to perform an arbitrary number of /web/frames/ authentication attempts using different passwords, and eventually gain access to a targeted account, NOTE: This vulnerability only affects products that are no longer supported by the maintainer

It was found that all versions of 3Scale developer portal lacked brute force protections. An attacker could use this gap to bypass login controls, and access privileged information, or possibly conduct further attacks.

A vulnerability was discovered in GitLab versions before 13.1.10, 13.2.8 and 13.3.4. GitLab OAuth endpoint was vulnerable to brute-force attacks through a specific parameter.

An issue was discovered on Samsung mobile devices with P(9.0) and Q(10.0) (with TEEGRIS) software. Attackers can determine user credentials via a brute-force attack against the Gatekeeper trustlet. The Samsung ID is SVE-2020-16908 (May 2020).

OX App Suite 7.10.1 to 7.10.3 has improper input validation for rate limits with a crafted User-Agent header, spoofed vacation notices, and /apps/load memory consumption.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers to access uncontrolled the login service at /webif/SecurityModule in a brute force attack. The password could be weak and default username is known as 'admin'. This is usable and part of an attack chain to gain SSH root access.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V2.0 SP1). The web interface has no means to prevent password guessing attacks. The vulnerability could be exploited by an attacker with network access to the vulnerable software, requiring no privileges and no user interaction. The vulnerability could allow full access to the web interface. At the time of advisory publication no public exploitation of this security vulnerability was known.

User login brute force protection functionality bypass

An attacker can decrypt the Ovarro TBox login password by communication capture and brute force attacks.

A CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists that could allow an attacker to gain unauthorized access to the charging station web interface by performing brute force attacks. Affected Products: EVlink City EVC1S22P4 / EVC1S7P4 (All versions prior to R8 V3.4.0.2 ), EVlink Parking EVW2 / EVF2 / EVP2PE (All versions prior to R8 V3.4.0.2), and EVlink Smart Wallbox EVB1A (All versions prior to R8 V3.4.0.2)

In Sorcery before 0.15.0, there is a brute force vulnerability when using password authentication via Sorcery. The brute force protection submodule will prevent a brute force attack for the defined lockout period, but once expired, protection will not be re-enabled until a user or malicious actor logs in successfully. This does not affect users that do not use the built-in brute force protection submodule, nor users that use permanent account lockout. This has been patched in 0.15.0.

Insufficiently Protected Credentials vulnerability exists in homeLYnk (Wiser For KNX) and spaceLYnk V2.60 and prior that could cause unauthorized access of when credentials are discovered after a brute force attack.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) (Exynos7885, Exynos8895, and Exynos9810 chipsets) software. The Gatekeeper trustlet allows a brute-force attack on the screen lock password. The Samsung ID is SVE-2019-14575 (January 2020).

IBM Security Guardium 11.2 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196314.

The Phonemes mode in Pwgen 2.06 generates predictable passwords, which makes it easier for context-dependent attackers to guess the password via a brute-force attack.

An issue in the user login box of LJCMS v1.11 allows attackers to hijack user accounts via brute force attacks.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

Cryptocat before 2.0.42 has Group Chat ECC Private Key Generation Brute Force Weakness

The cookie session ID is of insufficient length and can be exploited by brute force, which may allow a remote attacker to obtain a valid session, bypass authentication, and manipulate the transmitter.

A vulnerability classified as critical was found in Telecommunication Software SAMwin Contact Center Suite 5.1. This vulnerability affects the function passwordScramble in the library SAMwinLIBVB.dll of the component Password Handler. Incorrect implementation of a hashing function leads to predictable authentication possibilities. Upgrading to version 6.2 is able to address this issue. It is recommended to upgrade the affected component.

The htdocs/index.php?mainmenu=home login page in Dolibarr 10.0.6 allows an unlimited rate of failed authentication attempts.

The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack.

Chunghwa Telecom NOKIA G-040W-Q has a vulnerability of insufficient measures to prevent multiple failed authentication attempts. An unauthenticated remote attacker can execute a crafted Javascript to expose captcha in page, making it very easy for bots to bypass the captcha check and more susceptible to brute force attacks.

A CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to gain full access by brute force.

OpenCart CMS v4.0.2.2 was discovered to lack a protective mechanism on its login page against excessive login attempts, allowing unauthenticated attackers to gain access to the application via a brute force attack to the password parameter.

Improper Restriction of Excessive Authentication Attempts in GitHub repository wger-project/wger prior to 2.2.

Improper Restriction of Excessive Authentication Attempts in GitHub repository janeczku/calibre-web prior to 0.6.20.

A flaw was found in Red Hat Process Automation Manager 7 where an attacker can benefit from a brute force attack against Administration Console as the application does not limit the number of unsuccessful login attempts.

Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Mail Login allows Brute Force.This issue affects Mail Login: from 3.0.0 before 3.2.0, from 4.0.0 before 4.2.0.

Hikvision DVR DS-7204HGHI-F1 V4.0.1 build 180903 Web Version sends a different response for failed ISAPI/Security/sessionLogin/capabilities login attempts depending on whether the user account exists, which might make it easier to enumerate users. However, only about 4 or 5 failed logins are allowed.

Improper Restriction of Excessive Authentication Attempts vulnerability exists in all hardware versions of spaceLYnk and Wiser for KNX (formerly homeLYnk) which could allow an attacker to guess a password when brute force is used.