A vulnerability classified as critical was found in GE Voluson S8. Affected is the underlying Windows XP operating system. Missing patches might introduce an excessive attack surface. Access to the local network is required for this attack to succeed.

A miscommunication in the file system allows adversaries with access to the MU320E to escalate privileges on the MU320E (all firmware versions prior to v04A00.1).

The software performs an operation at a privilege level higher than the minimum level required, which creates new weaknesses or amplifies the consequences of other weaknesses on the Reason DR60 (all firmware versions prior to 02A04.1).

A vulnerability was found in GE Voluson S8. It has been rated as critical. This issue affects the Service Browser which itroduces hard-coded credentials. Attacking locally is a requirement. It is recommended to change the configuration settings.

A vulnerability classified as problematic has been found in GE Voluson S8. Affected is the file /uscgi-bin/users.cgi of the Service Browser. The manipulation leads to improper authentication and elevated access possibilities. It is possible to launch the attack on the local host.

The affected product is vulnerable due to cleartext transmission of credentials seen in the CIMPLICITY network, which can be easily spoofed and used to log in to make operational changes to the system.

SSH server configuration file does not implement some best practices. This could lead to a weakening of the SSH protocol strength, which could lead to additional misconfiguration or be leveraged as part of a larger attack on the MU320E (all firmware versions prior to v04A00.1).

The software contains a hard-coded password that could allow an attacker to take control of the merging unit using these hard-coded credentials on the MU320E (all firmware versions prior to v04A00.1).

GE Communicator, all versions prior to 4.0.517, allows a non-administrative user to replace the uninstaller with a malicious version, which could allow an attacker to gain administrator privileges to the system.

GE Mark VIe Controller is shipped with pre-configured hard-coded credentials that may allow root-user access to the controller. A limited application of the affected product may ship without setup and configuration instructions immediately available to the end user. The bulk of controllers go into applications requiring the GE commissioning engineer to change default configurations during the installation process. GE recommends that users reset controller passwords during installation in the operating environment.

GE Digital Proficy iFIX 2022, GE Digital Proficy iFIX v6.1, and GE Digital Proficy iFIX v6.5 are vulnerable to code injection, which may allow an attacker to insert malicious configuration files in the expected web server execution path and gain full control of the HMI software.

GE CIMPLICITY 2023 is by a process control vulnerability, which could allow a local attacker to insert malicious configuration files in the expected web server execution path to escalate privileges and gain full control of the HMI software.

A local privilege escalation vulnerability has been identified in the GE Digital CIMPLICITY HMI/SCADA product v10.0 and prior. If exploited, this vulnerability could allow an adversary to modify the system, leading to the arbitrary execution of code. This vulnerability is only exploitable if an attacker has access to an authenticated session. GE Digital CIMPLICITY v11.0, released January 2020, contains mitigation for this local privilege escalation vulnerability. GE Digital recommends all users upgrade to GE CIMPLICITY v11.0 or newer.

Privilege Escalation vulnerability in Microsoft Windows client (McTray.exe) in McAfee VirusScan Enterprise (VSE) 8.8 prior to Patch 14 may allow local users to interact with the On-Access Scan Messages - Threat Alert Window with elevated privileges via running McAfee Tray with elevated privileges.

A privilege escalation vulnerability was identified in the CLI command of Zyxel USG FLEX 100(W) firmware versions 4.50 through 5.30, USG FLEX 200 firmware versions 4.50 through 5.30, USG FLEX 500 firmware versions 4.50 through 5.30, USG FLEX 700 firmware versions 4.50 through 5.30, USG FLEX 50(W) firmware versions 4.16 through 5.30, USG20(W)-VPN firmware versions 4.16 through 5.30, ATP series firmware versions 4.32 through 5.30, VPN series firmware versions 4.30 through 5.30, USG/ZyWALL series firmware versions 4.09 through 4.72, which could allow a local attacker to execute some OS commands with root privileges in some directories on a vulnerable device.

A vulnerability, which was classified as critical, was found in X1a0He Adobe Downloader up to 1.3.1 on macOS. Affected is the function shouldAcceptNewConnection of the file com.x1a0he.macOS.Adobe-Downloader.helper of the component XPC Service. The manipulation leads to improper privilege management. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. This product is not affiliated with the company Adobe.

Omnissa Horizon Client for macOS contains a Local privilege escalation (LPE) Vulnerability due to a logic flaw. Successful exploitation of this issue may allow attackers with user privileges to escalate their privileges to root on the system where the Horizon Client for macOS is installed.

An issue was discovered in TitanFTP (aka Titan FTP) NextGen before 1.2.1050. When installing, Microsoft SQL Express 2019 installs by default with an SQL instance running as SYSTEM with BUILTIN\Users as sysadmin, thus enabling unprivileged Windows users to execute commands locally as NT AUTHORITY\SYSTEM, aka NX-I674 (sub-issue 2). NOTE: as of 2022-06-21, the 1.2.1050 release corrects this vulnerability in a new installation, but not in an upgrade installation.

In Tenable Agent versions prior to 10.8.5 on a Windows host, it was found that a non-administrative user could overwrite arbitrary local system files with log content at SYSTEM privilege.

In multiple methods of UserManagerService.java, there is a possible failure to persist or enforce user restrictions due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.

In multiple locations, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In Telerik JustDecompile versions prior to 2024 R1, a privilege elevation vulnerability has been identified in the applications installer component.  In an environment where an existing Telerik JustDecompile install is present, a lower privileged user has the ability to manipulate the installation package to elevate their privileges on the underlying operating system.

Local privilege escalation vulnerability affects OpenText Operations Agent product versions 12.15 and 12.20-12.25 when installed on Non-Windows platforms. The vulnerability could allow local privilege escalation. 

NVIDIA DGX Spark GB10 contains a vulnerability in SROOT, where an attacker could use privileged access to gain access to SoC protected areas. A successful exploit of this vulnerability might lead to code execution, information disclosure, data tampering, denial of service, or escalation of privileges.

Privilege escalation in jar_signature agent plugin in Checkmk before 2.2.0p18, 2.1.0p38 and 2.0.0p39 allows local user to escalate privileges

Privilege escalation in mk_tsm agent plugin in Checkmk before 2.2.0p18, 2.1.0p38 and 2.0.0p39 allows local user to escalate privileges

In updateState of ContentProtectionTogglePreferenceController.java, there is a possible way for a secondary user to disable the primary user's deceptive app scanning setting due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

arch/x86/kernel/entry_64.S in the Linux kernel before 3.17.5 does not properly handle faults associated with the Stack Segment (SS) segment register, which allows local users to gain privileges by triggering an IRET instruction that leads to access to a GS Base address from the wrong space.

A correctness issue was addressed with improved checks. This issue is fixed in iOS 18.5 and iPadOS 18.5, macOS Sequoia 15.5, macOS Sonoma 14.7.6, macOS Ventura 13.7.6, tvOS 18.5, visionOS 2.5, watchOS 11.5. A user may be able to elevate privileges.

Local privilege escalation due to excessive permissions assigned to child processes. The following products are affected: Acronis Snap Deploy (Windows) before build 3640

UC-8100A-ME-T System Image: Versions v1.0 to v1.6, UC-2100 System Image: Versions v1.0 to v1.12, UC-2100-W System Image: Versions v1.0 to v 1.12, UC-3100 System Image: Versions v1.0 to v1.6, UC-5100 System Image: Versions v1.0 to v1.4, UC-8100 System Image: Versions v3.0 to v3.5, UC-8100-ME-T System Image: Versions v3.0 and v3.1, UC-8200 System Image: v1.0 to v1.5, AIG-300 System Image: v1.0 to v1.4, UC-8410A with Debian 9 System Image: Versions v4.0.2 and v4.1.2, UC-8580 with Debian 9 System Image: Versions v2.0 and v2.1, UC-8540 with Debian 9 System Image: Versions v2.0 and v2.1, and DA-662C-16-LX (GLB) System Image: Versions v1.0.2 to v1.1.2 of Moxa's ARM-based computers have an execution with unnecessary privileges vulnerability, which could allow an attacker with user-level privileges to gain root privileges.

A Privilege Context Switching issue was discovered in join.c in Firejail 0.9.68. By crafting a bogus Firejail container that is accepted by the Firejail setuid-root program as a join target, a local attacker can enter an environment in which the Linux user namespace is still the initial user namespace, the NO_NEW_PRIVS prctl is not activated, and the entered mount namespace is under the attacker's control. In this way, the filesystem layout can be adjusted to gain root privileges through execution of available setuid-root binaries such as su or sudo.

Zohocorp ManageEngine EndPoint Central versions 11.3.2416.21 and below, 11.3.2428.9 and below are vulnerable to Arbitrary File Deletion in the agent installed machines.

Improper privilege management in Jungo WinDriver before 12.1.0 allows local attackers to escalate privileges and execute arbitrary code.

An improper privilege management vulnerability [CWE-269] in Fortinet FortiSOAR before 7.2.1 allows a GUI user who has already found a way to modify system files (via another, unrelated and hypothetical exploit) to execute arbitrary Python commands as root.

In Versa Analytics, the cron jobs are used for scheduling tasks by executing commands at specific dates and times on the server. If the job is run as the user root, there is a potential privilege escalation vulnerability. In this case, the job runs a script as root that is writable by users who are members of the versa group.

An improper access control vulnerability in Trend Micro Deep Security 20.0 and Trend Micro Cloud One - Endpoint and Workload Security Agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

An exposed dangerous function vulnerability in the Trend Micro Apex One agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to a utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient security controls on the CLI. An attacker could exploit this vulnerability by using an affected CLI utility that is running on an affected system. A successful exploit could allow the attacker to gain root privileges.

Local privilege escalation vulnerability potentially allowed an attacker to misuse ESET’s file operations to delete files without having proper permission.

A vulnerability in Cisco SD-WAN Software could allow an authenticated, local attacker to elevate privileges to root group on the underlying operating system. The vulnerability is due to incorrect permissions being set when the affected command is executed. An attacker could exploit this vulnerability by executing the affected command on an affected system. A successful exploit could allow the attacker to gain root privileges.

The SolarWinds Dameware Mini Remote Control was determined to be affected by Incorrect Permissions Local Privilege Escalation Vulnerability. This vulnerability requires local access and a valid low privilege account to be susceptible to this vulnerability.

Improper privilege management in Microsoft Office SharePoint allows an authorized attacker to elevate privileges locally.

Sandbox Accounts for Events provides multiple, temporary AWS accounts to a number of authenticated users simultaneously via a browser-based GUI. Authenticated users could potentially read data from the events table by sending request payloads to the events API, collecting information on planned events, timeframes, budgets and owner email addresses. This data access may allow users to get insights into upcoming events and join events which they have not been invited to. This issue has been patched in version 1.10.0.

A vulnerability in the BitdefenderVirusScanner binary as used in Bitdefender Virus Scanner for MacOS may allow .dynamic library injection (DYLD injection) without being blocked by AppleMobileFileIntegrity (AMFI). This issue is caused by the absence of Hardened Runtime or Library Validation signing. This issue affects Bitdefender Virus Scanner versions before 3.18.

Pritunl Client v1.2.2550.20 contains a local privilege escalation vulnerability in the pritunl-service component. The attack vector is: malicious openvpn config. A local attacker could leverage the log and log-append along with log injection to create or append to privileged script files and execute code as root/SYSTEM.

In installExistingPackageAsUser of InstallPackageHelper.java, there is a possible carrier restriction bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

Juniper Junos OS 13.2 before 13.2R5, 13.2X51, 13.2X52, and 13.3 before 13.3R3 allow local users to bypass intended restrictions and execute arbitrary Python code via vectors involving shell access.

Dell EMC Isilon OneFS versions 8.1 and later and Dell EMC PowerScale OneFS version 9.0.0 contain a privilege escalation vulnerability on a SmartLock Compliance mode cluster. The compadmin user connecting using ISI PRIV LOGIN SSH or ISI PRIV LOGIN CONSOLE can elevate privileges to the root user if they have ISI PRIV HARDENING privileges.