VMware vSphere Data Protection (VDP) 6.1.x, 6.0.x, 5.8.x, and 5.5.x locally stores vCenter Server credentials using reversible encryption. This issue may allow plaintext credentials to be obtained.

An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. A custom encryption algorithm is used to store encrypted passwords. This algorithm will XOR the password with the hardcoded *j7a(L#yZ98sSd5HfSgGjMj8;Ss;d)(*&^#@$a2s0i3g value.

Sympa before 6.2.62 relies on a cookie parameter for certain security objectives, but does not ensure that this parameter exists and has an unpredictable value. Specifically, the cookie parameter is both a salt for stored passwords and an XSS protection mechanism.

A cryptographic weakness existed in the authentication protocol of Remote Desktop. This issue was addressed by implementing the Secure Remote Password authentication protocol. This issue is fixed in Apple Remote Desktop 3.9. An attacker may be able to capture cleartext passwords.

In the IPv6 implementation in the Linux kernel before 5.13.3, net/ipv6/output_core.c has an information leak because of certain use of a hash table which, although big, doesn't properly consider that IPv6-based attackers can typically choose among many IPv6 source addresses.

In Mbed TLS before 3.1.0, psa_aead_generate_nonce allows policy bypass or oracle-based decryption when the output buffer is at memory locations accessible to an untrusted application.

In Mbed TLS before 2.28.0 and 3.x before 3.1.0, psa_cipher_generate_iv and psa_cipher_encrypt allow policy bypass or oracle-based decryption when the output buffer is at memory locations accessible to an untrusted application.

IBM Storage Copy Data Management 2.2.0.0 through 2.2.19.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 262268.

mySCADA myPRO Versions 8.20.0 and prior stores passwords using MD5, which may allow an attacker to crack the previously retrieved password hashes.

A Broken or Risky Cryptographic Algorithm exists in Max Mazurov Maddy before 0.5.2, which is an unnecessary risk that may result in the exposure of sensitive information.

An insufficiently protected credentials issue was discovered in Intland codeBeamer ALM 10.x through 10.1.SP4. The remember-me cookie (CB_LOGIN) issued by the application contains the encrypted user's credentials. However, due to a bug in the application code, those credentials are encrypted using a NULL encryption key.

It was found that python-rsa is vulnerable to Bleichenbacher timing attacks. An attacker can use this flaw via the RSA decryption API to decrypt parts of the cipher text encrypted with RSA.

IBM Security Verify Governance, Identity Manager virtual appliance component 10.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 225078.

IBM Security Verify Governance, Identity Manager 10.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 225007.

Oclean Mobile Application 2.1.2 communicates with an external website using HTTP so it is possible to eavesdrop the network traffic. The content of HTTP payload is encrypted using XOR with a hardcoded key, which allows for the possibility to decode the traffic.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Due to the usage of an outdated cipher mode on port 10005/tcp, an attacker could extract the encryption key from a captured communication with the device.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Due to the usage of an insecure random number generation function and a deprecated cryptographic function, an attacker could extract the key that is used when communicating with an affected device on port 8080/tcp.

IBM QRadar Data Synchronization App 1.0 through 3.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 217370.

IBM UrbanCode Deploy (UCD) 7.0.5, 7.1.0, 7.1.1, and 7.1.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 218859.

Sensitive information disclosure and weak encryption in Pyrescom Termod4 time management devices before 10.04k allows remote attackers to read a session-file and obtain plain-text user credentials.

AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q (Affected 1.1.1-1.1.1p).

There is a weak algorithm vulnerability in some Huawei products. The affected products use the RSA algorithm in the SSL key exchange algorithm which have been considered as a weak algorithm. Attackers may exploit this vulnerability to leak some information.

libxcrypt in SUSE openSUSE 11.0 uses the DES algorithm when the configuration specifies the MD5 algorithm, which makes it easier for attackers to conduct brute-force attacks against hashed passwords.

Fresenius Kabi Agilia Link + version 3.0 does not enforce transport layer encryption. Therefore, transmitted data may be sent in cleartext. Transport layer encryption is offered on Port TCP/443, but the affected service does not perform an automated redirect from the unencrypted service on Port TCP/80 to the encrypted service.

HCL OneTest Performance V9.5, V10.0, V10.1 uses basic authentication which is relatively weak. An attacker could potentially decode the encoded credentials.

Python-RSA before 4.1 ignores leading '\0' bytes during decryption of ciphertext. This could conceivably have a security-relevant impact, e.g., by helping an attacker to infer that an application uses Python-RSA, or if the length of accepted ciphertext affects application behavior (such as by causing excessive memory allocation).

airhost.exe in Zoom Client for Meetings 4.6.11 uses the SHA-256 hash of 0123425234234fsdfsdr3242 for initialization of an OpenSSL EVP AES-256 CBC context. NOTE: the vendor states that this initialization only occurs within unreachable code

Zoom Client for Meetings through 4.6.9 uses the ECB mode of AES for video and audio encryption. Within a meeting, all participants use a single 128-bit key.

In the "NQ Contacts Backup & Restore" application 1.1 for Android, DES encryption with a static key is used to secure transmitted contact data. This makes it easier for remote attackers to obtain cleartext information by sniffing the network.

Broadcom RAID Controller web interface is vulnerable has an insecure default TLS configuration that support obsolete and vulnerable TLS protocols

IBM Security Guardium 10.0 Database Activity Monitor uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 132611.

Rucky is a USB HID Rubber Ducky Launch Pad for Android. Versions 2.2 and earlier for release builds and versions 425 and earlier for nightly builds suffer from use of a weak cryptographic algorithm (RSA/ECB/PKCS1Padding). The issue will be patched in v2.3 for release builds and 426 onwards for nightly builds. As a workaround, one may disable an advance security feature if not required.

IBM Security Guardium Insights 2.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 174405.

Broadcom RAID Controller web interface is vulnerable has an insecure default TLS configuration that supports obsolete SHA1-based ciphersuites

Squirrelmail 4.0 uses the outdated MD5 hash algorithm for passwords.

An Observable Timing Discrepancy, Covert Timing Channel vulnerability in Silabs GSDK on ARM potentially allows Padding Oracle Crypto Attack on CBC PKCS7.This issue affects GSDK: through 4.4.0.

EnroCrypt is a Python module for encryption and hashing. Prior to version 1.1.4, EnroCrypt used the MD5 hashing algorithm in the hashing file. Beginners who are unfamiliar with hashes can face problems as MD5 is considered an insecure hashing algorithm. The vulnerability is patched in v1.1.4 of the product. As a workaround, users can remove the `MD5` hashing function from the file `hashing.py`.

IBM Sterling Connect:Direct for UNIX 1.5 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 210574.

IBM Cognos Controller 10.4.1, 10.4.2, and 11.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 264939.

IBM Spectrum Copy Data Management 2.2.13 and earlier uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 214617.

"HCL AppScan Enterprise makes use of broken or risky cryptographic algorithm to store REST API user details."

IBM API Connect 2018.4.1.7 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 168510.

In GLPI before version 9.5.0, the encryption algorithm used is insecure. The security of the data encrypted relies on the password used, if a user sets a weak/predictable password, an attacker could decrypt data. This is fixed in version 9.5.0 by using a more secure encryption library. The library chosen is sodium.

IBM UrbanCode Deploy (UCD) 7.1.1.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

Philips IntelliSpace Portal all versions of 8.0.x, and 7.0.x have a vulnerability using SSL legacy encryption that could allow an attacker to gain unauthorized access to resources and information.

IBM CICS TX Advanced 10.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 260770.

IBM Security Access Manager Docker 10.0.0.0 through 10.0.7.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 261198.