The App Settings (/admin/app) page in GROWI versions prior to v6.0.6 stores sensitive information in cleartext form. As a result, the Secret access key for external service may be obtained by an attacker who can access the App Settings page.

Jenkins Port Allocator Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins SOASTA CloudTest Plugin stores credentials unencrypted in its global configuration file on the Jenkins master where they can be viewed by users with access to the master file system.

Jenkins Gogs Plugin stored credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins View26 Test-Reporting Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins NeoLoad Plugin 2.2.5 and earlier stored credentials unencrypted in its global configuration file and in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system.

Jenkins iceScrum Plugin 1.1.4 and earlier stored credentials unencrypted in job config.xml files on the Jenkins master where they could be viewed by users with Extended Read permission, or access to the master file system.

Jenkins Fortify on Demand Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Jenkins Consul KV Builder Plugin 2.0.13 and earlier does not mask the HashiCorp Consul ACL Token on the global configuration form, increasing the potential for attackers to observe and capture it.

KDE Messagelib through 5.17.0 reveals cleartext of encrypted messages in some situations. Deleting an attachment of a decrypted encrypted message stored on a remote server (e.g., an IMAP server) causes KMail to upload the decrypted content of the message to the remote server. With a crafted message, a user could be tricked into decrypting an encrypted message and then deleting an attachment attached to this message. If the attacker has access to the messages stored on the email server, then the attacker could read the decrypted content of the encrypted message. This occurs in ViewerPrivate::deleteAttachment in messageviewer/src/viewer/viewer_p.cpp.

RICON Industrial Cellular Router S9922L 16.10.3(3794) is affected by cleartext storage of sensitive information and sends username and password as base64.

The Momo application 2.1.9 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user and a user's access token via Logcat.

A vulnerability has been identified in Control Center Server (CCS) (All versions < V1.5.0). The user configuration menu in the web interface of the Control Center Server (CCS) transfers user passwords in clear to the client (browser). An attacker with administrative privileges for the web interface could be able to read (and not only reset) passwords of other CCS users.

Since version 5.2.0, when using deferrable mode with the path of a Kubernetes configuration file for authentication, the Airflow worker serializes this configuration file as a dictionary and sends it to the triggerer by storing it in metadata without any encryption. Additionally, if used with an Airflow version between 2.3.0 and 2.6.0, the configuration dictionary will be logged as plain text in the triggerer service without masking. This allows anyone with access to the metadata or triggerer log to obtain the configuration file and use it to access the Kubernetes cluster. This behavior was changed in version 7.0.0, which stopped serializing the file contents and started providing the file path instead to read the contents into the trigger. Users are recommended to upgrade to version 7.0.0, which fixes this issue.

An internal product security audit of Lenovo XClarity Controller (XCC) discovered that the XCC configuration backup/restore password may be written to an internal XCC log buffer if Lenovo XClarity Administrator (LXCA) is used to perform the backup/restore. The backup/restore password typically exists in this internal log buffer for less than 10 minutes before being overwritten. Generating an FFDC service log will include the log buffer contents, including the backup/restore password if present. The FFDC service log is only generated when requested by a privileged XCC user and it is only accessible to the privileged XCC user that requested the file. The backup/restore password is not captured if the backup/restore is initiated directly from XCC.

IBM Security Guardium 11.2 discloses sensitive information in the response headers that could be used in further attacks against the system. IBM X-Force ID: 174850.

In Rapid7 Komand version 0.41.0 and prior, certain endpoints that are able to list the always encrypted-at-rest connection data could return some configurations of connection data without obscuring sensitive data from the API response sent over an encrypted channel. This issue does not affect Rapid7 Komand version 0.42.0 and later versions.

IBM Security Secret Server 10.6 stores potentially sensitive information in config files that could be read by an authenticated user. IBM X-Force ID: 190048.

Cleartext storage of sensitive information exists in SkyBridge MB-A100/110 firmware Ver. 4.2.0 and earlier, which may allow a remote authenticated attacker to obtain an APN credential for the product.

The Send Anywhere application 9.4.18 for Android stores confidential information insecurely on the system (i.e., in cleartext), which allows a non-root user to find out the username/password of a valid user via /data/data/com.estmob.android.sendanywhere/shared_prefs/sendanywhere_device.xml.

Plaintext Password in Registry vulnerability in 42gears surelock windows surelockwinsetupv2.40.0.Exe on Windows (Registery modules) allows Retrieve Admin user credentials This issue affects surelock windows: from 2.3.12 through 2.40.0.

Nextcloud mail is an email app for the nextcloud home server platform. In versions prior to 2.2.2 user's passwords were stored in cleartext in the database during the duration of OAuth2 setup procedure. Any attacker or malicious user with access to the database would have access to these user passwords until the OAuth setup has been completed. It is recommended that the Nextcloud Mail app is upgraded to 2.2.2. There are no known workarounds for this issue.

IBM Security Identity Manager 7.0.2 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 199998.

Information disclosure vulnerability exists in Pgpool-II 4.4.0 to 4.4.1 (4.4 series), 4.3.0 to 4.3.4 (4.3 series), 4.2.0 to 4.2.11 (4.2 series), 4.1.0 to 4.1.14 (4.1 series), 4.0.0 to 4.0.21 (4.0 series), All versions of 3.7 series, All versions of 3.6 series, All versions of 3.5 series, All versions of 3.4 series, and All versions of 3.3 series. A specific database user's authentication information may be obtained by another database user. As a result, the information stored in the database may be altered and/or database may be suspended by a remote attacker who successfully logged in the product with the obtained credentials.

Jenkins Nouvola DiveCloud Plugin 1.08 and earlier stores DiveCloud API Keys and Credentials Encryption Keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

IBM Maximo Asset Management 7.6 could allow a an authenticated user to replace a target page with a phishing site which could allow the attacker to obtain highly sensitive information. IBM X-Force ID: 155554.

Jenkins Applitools Eyes Plugin 1.16.5 and earlier stores Applitools API keys unencrypted in job config.xml files on the Jenkins controller, where they can be viewed by users with Item/Extended Read permission or access to the Jenkins controller file system.

A vulnerability in the logging component of Cisco Duo Authentication Proxy could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability exists because certain unencrypted credentials are stored. An attacker could exploit this vulnerability by accessing the logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to view sensitive information in clear text.

Jenkins Kryptowire Plugin 0.2 and earlier stores the Kryptowire API key unencrypted in its global configuration file on the Jenkins controller, where it can be viewed by users with access to the Jenkins controller file system.

The fix in 4.6.16, 4.7.9, 4.8.4 and 4.9.7 for CVE-2018-10919 Confidential attribute disclosure vi LDAP filters was insufficient and an attacker may be able to obtain confidential BitLocker recovery keys from a Samba AD DC.

A vulnerability in the configuration archive functionality of Cisco DNA Center could allow any privilege-level authenticated, remote attacker to obtain the full unmasked running configuration of managed devices. The vulnerability is due to the configuration archives files being stored in clear text, which can be retrieved by various API calls. An attacker could exploit this vulnerability by authenticating to the device and executing a series of API calls. A successful exploit could allow the attacker to retrieve the full unmasked running configurations of managed devices.

Jenkins view-cloner Plugin 1.1 and earlier stores passwords unencrypted in job config.xml files on the Jenkins controller where they can be viewed by users with Extended Read permission, or access to the Jenkins controller file system.

IBM Maximo Asset Management 7.6.1.2 and 7.6.1.3 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 237587.

Jenkins BigPanda Notifier Plugin 1.4.0 and earlier does not mask the BigPanda API key on the global configuration form, increasing the potential for attackers to observe and capture it.

IBM Robotic Process Automation 21.0.1 and 21.0.2 could disclose sensitive version to an unauthorized control sphere information that could aid in further attacks against the system. IBM X-Force ID: 234292.

On Xerox WorkCentre 3550 25.003.03.000 devices, an authenticated attacker can view the SMB server settings and can obtain the stored cleartext credentials associated with those settings.

An issue has been discovered in hunter2 affecting all versions before 2.1.0. Improper handling of auto-completion input allows an authenticated attacker to extract other users email addresses

"IBM Cognos Analytics 11.2.1, 11.2.0, 11.1.7 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 229963."

IBM Security Directory Suite VA 8.0.1 through 8.0.1.19 stores user credentials in plain clear text which can be read by an authenticated user. IBM X-Force ID: 228567.

An issue was discovered in the view_statistics (aka View frontend statistics) extension before 2.0.1 for TYPO3. It saves all GET and POST data of TYPO3 frontend requests to the database. Depending on the extensions used on a TYPO3 website, sensitive data (e.g., cleartext passwords if ext:felogin is installed) may be saved.

A cleartext storage of sensitive information exists in Rocket.Chat <v4.6.4 due to Oauth token being leaked in plaintext in Rocket.chat logs.

An issue was discovered in the MakeMyTrip application 7.2.4 for Android. The databases (locally stored) are not encrypted and have cleartext that might lead to sensitive information disclosure, as demonstrated by data/com.makemytrip/databases and data/com.makemytrip/Cache SQLite database files.

389-ds-base before versions 1.3.8.5, 1.4.0.12 is vulnerable to a Cleartext Storage of Sensitive Information. By default, when the Replica and/or retroChangeLog plugins are enabled, 389-ds-base stores passwords in plaintext format in their respective changelog files. An attacker with sufficiently high privileges, such as root or Directory Manager, can query these files in order to retrieve plaintext passwords.

The Philips DoseWise Portal web-based application versions 1.1.7.333 and 2.1.1.3069 stores login credentials in clear text within backend system files. CVSS v3 base score: 6.5, CVSS vector string: AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N.

Nextcloud Server is the file server software for Nextcloud, a self-hosted productivity platform. In Nextcloud Server prior to versions 23.0.9 and 24.0.5 and Nextcloud Enterprise Server prior to versions 22.2.10.5, 23.0.9, and 24.0.5 an attacker reading `nextcloud.log` may gain knowledge of credentials to connect to a SharePoint service. Nextcloud Server versions 23.0.9 and 24.0.5 and Nextcloud Enterprise Server versions 22.2.10.5, 23.0.9, and 24.0.5 contain a patch for this issue. As a workaround, set `zend.exception_ignore_args = On` as an option in `php.ini`.

Cleartext Storage of Sensitive Information in Memory vulnerability in Mitsubishi Electric Corporation GX Works3 versions 1.015R and later, GX Works2 all versions and GX Developer versions 8.40S and later allows a remote unauthenticated attacker to disclose sensitive information. As a result, unauthenticated users could obtain information about the project file for MELSEC safety CPU modules or project file for MELSEC Q/FX/L series with security setting.

Jenkins Sofy.AI Plugin stores credentials unencrypted in job config.xml files on the Jenkins master where they can be viewed by users with Extended Read permission, or access to the master file system.

Dell Wyse Management Suite 3.6.1 and below contains a Sensitive Data Exposure vulnerability. A low privileged malicious user could potentially exploit this vulnerability in order to obtain credentials. The attacker may be able to use the exposed credentials to access the target device and perform unauthorized actions.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. It is an npm package "parse-server". In Parse Server before version 4.5.0, user passwords involved in LDAP authentication are stored in cleartext. This is fixed in version 4.5.0 by stripping password after authentication to prevent cleartext password storage.

BEC Technologies Multiple Routers Cleartext Password Storage Information Disclosure Vulnerability. This vulnerability allows remote attackers to disclose sensitive information on affected installations of BEC Technologies routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the web-based user interface. The issue results from storing credentials in a recoverable format. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-25986.