Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to versions 3.1.43 and 4.0.3, template authors could run restricted static php methods. Users should upgrade to version 3.1.43 or 4.0.3 to receive a patch.

SeaCMS 12.9 has a remote code execution vulnerability. The vulnerability is caused by admin_weixin.php directly splicing and writing the user input data into weixin.php without processing it, which allows authenticated attackers to exploit the vulnerability to execute arbitrary commands and obtain system permissions.

PowerScale OneFS 8.1.2,8.2.2 and 9.1.0 contains an improper input sanitization issue in its API handler. An un-authtenticated with ISI_PRIV_SYS_SUPPORT and ISI_PRIV_LOGIN_PAPI privileges could potentially exploit this vulnerability, leading to potential privileges escalation.

Unrestricted file upload vulnerability in asys/site/files.php in Adminsystems CMS before 4.0.2 allows remote authenticated users to execute arbitrary code by uploading a file with an executable extension, then accessing it via a direct request to the file in upload/files/.

An issue was discovered in the cantata-mounter D-Bus service in Cantata through 2.3.1. A regular user can inject additional mount options such as file_mode= by manipulating (for example) the domain parameter of the samba URL.

An issue was discovered in Joomla! 2.5.0 through 3.8.8 before 3.8.9. The autoload code checks classnames to be valid, using the "class_exists" function in PHP. In PHP 5.3, this function validates invalid names as valid, which can result in a Local File Inclusion.

TYPO3 is an open source PHP based web content management system. In TYPO3 before versions 8.7.40, 9.5.25, 10.4.14, 11.1.1 due to improper input validation, attackers can by-pass restrictions of predefined options and submit arbitrary data in the Form Designer backend module of the Form Framework. In the default configuration of the Form Framework this allows attackers to explicitly allow arbitrary mime-types for file uploads - however, default _fileDenyPattern_ successfully blocked files like _.htaccess_ or _malicious.php_. Besides that, attackers can persist those files in any writable directory of the corresponding TYPO3 installation. A valid backend user account with access to the form module is needed to exploit this vulnerability. This is fixed in versions 8.7.40, 9.5.25, 10.4.14, 11.1.1.

A vulnerability was found in zhilink 智互联(深圳)科技有限公司 ADP Application Developer Platform 应用开发者平台 1.0.0 and classified as critical. Affected by this issue is some unknown functionality of the file /adpweb/wechat/verifyToken/. The manipulation leads to deserialization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Alotcer - AR7088H-A firmware version 16.10.3 Command execution Improper validation of unspecified input field may allow Authenticated command execution.

An issue was discovered in Linaro LAVA before 2018.5.post1. Because of use of yaml.load() instead of yaml.safe_load() when parsing user data, remote code execution can occur.

Status2k allows Remote Command Execution in admin/options/editpl.php.

Invalid file validation on the upload feature in GROWI versions v4.2.2 allows a remote attacker with administrative privilege to overwrite the files on the server, which may lead to arbitrary code execution.

A flaw was found in RPC request using gfs3_mknod_req supported by glusterfs server. An authenticated attacker could use this flaw to write files to an arbitrary location via path traversal and execute arbitrary code on a glusterfs server node.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

An attacker who has gained access to an admin account can perform RCE via null-byte injection Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.0.0 before 7.1.0

A flaw was found in RPC request using gfs2_create_req in glusterfs server. An authenticated attacker could use this flaw to create arbitrary files and execute arbitrary code on glusterfs server nodes.

A heap-buffer overflow was found in the way samba clients processed extra long filename in a directory listing. A malicious samba server could use this flaw to cause arbitrary code execution on a samba client. Samba versions before 4.6.16, 4.7.9 and 4.8.4 are vulnerable.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

A vulnerability was discovered in SPICE before version 0.14.1 where the generated code used for demarshalling messages lacked sufficient bounds checks. A malicious client or server, after authentication, could send specially crafted messages to its peer which would result in a crash or, potentially, other impacts.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities.

Ansible Tower through version 3.2.3 has a vulnerability that allows users only with access to define variables for a job template to execute arbitrary code on the Tower server.

Hastymail 1.5 and earlier before 20061008 allows remote authenticated users to send arbitrary SMTP commands by placing them after a CRLF.CRLF sequence in the smtp_message parameter. NOTE: this crosses privilege boundaries if the SMTP server configuration prevents a user from establishing a direct SMTP session. NOTE: this is a different type of issue than CVE-2006-5262.

IBM QRadar SIEM 7.4 and 7.5 is vulnerable to privilege escalation, allowing a user with some admin capabilities to gain additional admin capabilities. IBM X-Force ID: 239425.

H2 1.4.197, as used in Datomic before 0.9.5697 and other products, allows remote code execution because CREATE ALIAS can execute arbitrary Java code. NOTE: the vendor's position is "h2 is not designed to be run outside of a secure environment."

WordPress version 4.9.8 and earlier contains a CWE-20 Input Validation vulnerability in thumbnail processing that can result in remote code execution due to an incomplete fix for CVE-2017-1000600. This attack appears to be exploitable via thumbnail upload by an authenticated user and may require additional plugins in order to be exploited however this has not been confirmed at this time.

The admin interface in Landesk Management Suite 9.6 and earlier allows remote attackers to conduct remote file inclusion attacks involving ASPX pages from third-party sites via the d parameter to (1) ldms/sm_actionfrm.asp or (2) remote/frm_coremainfrm.aspx; or the (3) top parameter to remote/frm_splitfrm.aspx.

A Local File Inclusion vulnerability was found in HRSALE The Ultimate HRM v1.0.2, exploitable by a low privileged user.

IBM Security Guardium Insights 3.0 could allow an authenticated user to perform unauthorized actions due to improper input validation. IBM X-Force ID: 205255.

The PMA_Bookmark_get function in libraries/bookmark.lib.php in phpMyAdmin 2.11.x before 2.11.11.3, and 3.3.x before 3.3.9.2, does not properly restrict bookmark queries, which makes it easier for remote authenticated users to trigger another user's execution of a SQL query by creating a bookmark.

Eucalyptus before 2.0.3 and Eucalyptus EE before 2.0.2, as used in Ubuntu Enterprise Cloud (UEC) and other products, do not properly interpret signed elements in SOAP requests, which allows man-in-the-middle attackers to execute arbitrary commands by modifying a request, related to an "XML Signature Element Wrapping" or a "SOAP signature replay" issue.

A vulnerability in an operations script of Cisco UCS Central could allow an authenticated, remote attacker to execute arbitrary shell commands with the privileges of the daemon user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by posting a crafted request to the user interface of Cisco UCS Central. This vulnerability affects Cisco UCS Central Software prior to Release 2.0(1c). Cisco Bug IDs: CSCve70825.

A vulnerability in the credential reset functionality for Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP request. A successful exploit could allow the attacker to gain elevated privileges to access functionality that should be restricted. The attacker must have valid user credentials to the device to exploit this vulnerability. Cisco Bug IDs: CSCvf69753.

Input validation issue in EC-CUBE Payment Module (2.12) version 3.5.23 and earlier, EC-CUBE Payment Module (2.11) version 2.3.17 and earlier, GMO-PG Payment Module (PG Multi-Payment Service) (2.12) version 3.5.23 and earlier, GMO-PG Payment Module (PG Multi-Payment Service) (2.11) version 2.3.17 and earlier allows an attacker with administrative rights to execute arbitrary PHP code on the server via unspecified vectors.

A vulnerability has been found in easysoft zentaopms 21.5_20250307 and classified as critical. This vulnerability affects the function Edit of the file /index.php?m=editor&f=edit&filePath=cGhhcjovLy9ldGMvcGFzc3dk&action=edit of the component Committer. The manipulation of the argument filePath leads to deserialization. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security QRadar SIEM QRM 7.1 MR1 and QRM/QVM 7.2 MR2 allows remote authenticated users to gain privileges via invalid input.

A CWE-20: Improper Input Validation vulnerability exists that could allow an authenticated attacker to gain the same privilege as the application on the server when a malicious payload is provided over HTTP for the server to execute.

Cacti before 0.8.7f, as used in Red Hat High Performance Computing (HPC) Solution and other products, allows remote authenticated administrators to execute arbitrary commands via shell metacharacters in (1) the FQDN field of a Device or (2) the Vertical Label field of a Graph Template.

The merge_authdata function in kdc_authdata.c in the Key Distribution Center (KDC) in MIT Kerberos 5 (aka krb5) 1.8.x before 1.8.4 does not properly manage an index into an authorization-data list, which allows remote attackers to cause a denial of service (daemon crash), or possibly obtain sensitive information, spoof authorization, or execute arbitrary code, via a TGS request that triggers an uninitialized pointer dereference, as demonstrated by a request from a Windows Active Directory client.

The dashboard subscription interface in Request Tracker (RT) 4.x before 4.0.25, 4.2.x before 4.2.14, and 4.4.x before 4.4.2 might allow remote authenticated users with certain privileges to execute arbitrary code via a crafted saved search name.

Local user may lead to privilege escalation using Gaia Portal hostnames page.

Unrestricted file upload vulnerability in the Tribulant Slideshow Gallery plugin before 1.4.7 for WordPress allows remote authenticated users to execute arbitrary code by uploading a PHP file, then accessing it via a direct request to the file in wp-content/uploads/slideshow-gallery/.

DP300 V500R002C00,TE60 with software V100R001C01, V100R001C10, V100R003C00, V500R002C00 and V600R006C00,TP3106 with software V100R001C06 and V100R002C00,ViewPoint 9030 with software V100R011C02, V100R011C03,eCNS210_TD with software V100R004C10,eSpace 7950 with software V200R003C00 and V200R003C30,eSpace IAD with software V300R001C07SPCa00 and V300R002C01SPCb00,eSpace U1981 with software V100R001C20, V100R001C30, V200R003C00, V200R003C20 and V200R003C30 have an input validation vulnerability.A remote attacker may exploit this vulnerability by crafting a malformed packet and sending it to the device. A successful exploit could allow the attacker to cause a denial of service or execute arbitrary code.

In cPanel before 62.0.4, Exim piped filters ran in the context of an incorrect user account when delivering to a system user (SEC-204).

cPanel before 62.0.17 allows demo accounts to execute code via an NVData_fetchinc API call (SEC-233).

Improper Input Validation vulnerability exists in PowerChute Business Edition (software V9.0.x and earlier) which could cause remote code execution when a script is executed during a shutdown event.

cPanel before 64.0.21 allows demo accounts to execute code via an ImageManager_dimensions API call (SEC-243).