PHOENIX CONTACT TC ROUTER 3002T-4G through 2.05.3, TC ROUTER 2002T-3G through 2.05.3, TC ROUTER 3002T-4G VZW through 2.05.3, TC ROUTER 3002T-4G ATT through 2.05.3, TC CLOUD CLIENT 1002-4G through 2.03.17, and TC CLOUD CLIENT 1002-TXTX through 1.03.17 devices allow authenticated users to inject system commands through a modified POST request to a specific URL.
All Phoenix Contact managed FL SWITCH 3xxx, 4xxx, 48xx products running firmware version 1.0 to 1.33 are prone to OS command injection.
On various RAD-ISM-900-EN-* devices by PHOENIX CONTACT an admin user could use the configuration file uploader in the WebUI to execute arbitrary code with root privileges on the OS due to an improper validation of an integrity check value in all versions of the firmware.
In Phoenix Contact FL SWITCH Series 2xxx in version 3.00 an incorrect privilege assignment allows an low privileged user to enable full access to the device configuration.
An issue was discovered on PHOENIX CONTACT RAD-80211-XD and RAD-80211-XD/HP-BUS devices. Command injection can occur in the WebHMI component.
Improper Input Validation vulnerability in PC Worx Automation Suite of Phoenix Contact up to version 1.88 could allow an attacker with a manipulated project file to unpack arbitrary files outside of the selected project directory.
Multiple Phoenix Contact PLCnext control devices in versions prior to 2021.0.5 LTS are prone to a DoS attack through special crafted JSON requests.
An improper input validation in the Qualcom plctool allows a local attacker with low privileges to gain root access by changing the ownership of specific files.
An unauthenticated local attacker can perform a privilege escalation due to improper input validation in the OCPP agent service.
An unauthenticated remote attacker can perform a log injection due to improper input validation. Only a certain log file is affected.
An Improper Validation of Integrity Check Value issue was discovered in PHOENIX CONTACT mGuard firmware versions 7.2 to 8.6.0. mGuard devices rely on internal checksums for verification of the internal integrity of the update packages. Verification may not always be performed correctly, allowing an attacker to modify firmware update packages.
An unauthenticated remote attacker can modify configurations to perform a remote code execution, gain root rights or perform an DoS due to improper input validation.
On Phoenix Contact PLCnext Control Devices versions before 2021.0 LTS a specially crafted LLDP packet may lead to a high system load in the PROFINET stack. An attacker can cause failure of system services or a complete reboot.
An unauthenticated remote attacker can use MQTT messages to crash a service on charging stations complying with German Calibration Law, resulting in a temporary denial-of-service for these stations until they got restarted by the watchdog.
A local attacker with a local user account can leverage a vulnerable script via SSH to escalate privileges to root due to improper input validation.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P4 was found.
NetIQ Identity Manager before 4.5.6.1 allowed uploading files with double extensions or non-image content in the Themes handling of the User Application Administration, allowing malicious user administrators to potentially execute code or mislead users.
An authenticated user of Unitrends Enterprise Backup before 9.1.2 can execute arbitrary OS commands by sending a specially crafted filename to the /api/restore/download-files endpoint, related to the downloadFiles function in api/includes/restore.php.
SquirrelMail 1.4.22 (and other versions before 20170427_0200-SVN) allows post-authentication remote code execution via a sendmail.cf file that is mishandled in a popen call. It's possible to exploit this vulnerability to execute arbitrary shell commands on the remote server. The problem is in the Deliver_SendMail.class.php with the initStream function that uses escapeshellcmd() to sanitize the sendmail command before executing it. The use of escapeshellcmd() is not correct in this case since it doesn't escape whitespaces, allowing the injection of arbitrary command parameters. The problem is in -f$envelopefrom within the sendmail command line. Hence, if the target server uses sendmail and SquirrelMail is configured to use it as a command-line program, it's possible to trick sendmail into using an attacker-provided configuration file that triggers the execution of an arbitrary command. For exploitation, the attacker must upload a sendmail.cf file as an email attachment, and inject the sendmail.cf filename with the -C option within the "Options > Personal Informations > Email Address" setting.
A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.
A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.
A Remote Arbitrary Code Execution vulnerability in HPE Intelligent Management Center (IMC) PLAT version 7.2 E0403P06 was found.
A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.
vpn-user-portal (aka eduVPN or Let's Connect!) before 2.3.14, as packaged for Debian 10, Debian 11, and Fedora, allows remote authenticated users to obtain OS filesystem access, because of the interaction of QR codes with an exec that uses the -r option. This can be leveraged to obtain additional VPN access.
A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.
A security-check flaw was found in the way the Heketi 5 server API handled user requests. An authenticated Heketi user could send specially crafted requests to the Heketi server, resulting in remote command execution as the user running Heketi server and possibly privilege escalation.
A vulnerability in Sierra Wireless AirLink GX400, GX440, ES440, and LS300 routers with firmware before 4.4.5 and GX450, ES450, RV50, RV50X, MP70, and MP70E routers with firmware before 4.9 could allow an authenticated remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. This vulnerability is due to insufficient input validation on user-controlled input in an HTTP request to the targeted device. An attacker in possession of router login credentials could exploit this vulnerability by sending a crafted HTTP request to an affected system.
A vulnerability has been identified in SINEC NMS (All versions < V3.0). The affected application does not properly validate user input to a privileged command queue. This could allow an authenticated attacker to execute OS commands with elevated privileges.
Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability while saving a customer's details with a specially crafted file. An authenticated attacker with admin privileges can leverage this vulnerability to achieve remote code execution.
Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability. An attacker with admin privileges could make a crafted request to the Adobe Stock API to achieve remote code execution.
Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an improper input validation vulnerability in the API File Option Upload Extension. An attacker with Admin privileges can achieve unrestricted file upload which can result in remote code execution.
The network proxy page on the web portal for the Zoom On-Premise Meeting Connector Controller before version 4.6.365.20210703, Zoom On-Premise Meeting Connector MMR before version 4.6.365.20210703, Zoom On-Premise Recording Connector before version 3.8.45.20210703, Zoom On-Premise Virtual Room Connector before version 4.4.6868.20210703, and Zoom On-Premise Virtual Room Connector Load Balancer before version 2.5.5496.20210703 fails to validate input sent in requests to set the network proxy password. This could lead to remote command injection by a web portal administrator.
An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated J-Web attacker to escalate their privileges to root over the target device. This issue affects: Juniper Networks Junos OS All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2;
A vulnerability in the software update feature of Cisco Industrial Network Director could allow an authenticated, remote attacker to execute arbitrary code. The vulnerability is due to improper validation of files uploaded to the affected application. An attacker could exploit this vulnerability by authenticating to the affected system using administrator privileges and uploading an arbitrary file. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges.
Adobe Commerce versions 2.4.7, 2.4.6-p5, 2.4.5-p7, 2.4.4-p8 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction, but admin privileges are required and scope is changed.
Under certain circumstances the web interface will accept characters unrelated to the expected input.
manager.c in the Manager Interface in Asterisk Open Source 1.4.x before 1.4.40.1, 1.6.1.x before 1.6.1.25, 1.6.2.x before 1.6.2.17.3, and 1.8.x before 1.8.3.3 and Asterisk Business Edition C.x.x before C.3.6.4 does not properly check for the system privilege, which allows remote authenticated users to execute arbitrary commands via an Originate action that has an Async header in conjunction with an Application header.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
ServerAdmin/TestTelnetConnection.jsp in DS3 Authentication Server allows remote authenticated users to execute arbitrary commands via shell metacharacters in the HOST_NAME field.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
The email function in manage_sql.c in OpenVAS Manager 1.0.x through 1.0.3 and 2.0.x through 2.0rc2 allows remote authenticated users to execute arbitrary commands via the (1) To or (2) From e-mail address in an OMP request to the Greenbone Security Assistant (GSA).
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
A remote code execution vulnerability in HPE intelligent Management Center (iMC) PLAT iMC Plat 7.3 E0504P2 and earlier was found.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.