D-Link DIR-882 1.10B02 and 1.20B06 is vulnerable to Buffer Overflow via webGetVarString.

D-Link DIR878 1.02B04 and 1.02B05 are vulnerable to Buffer Overflow.

D-Link DIR823G 1.02B05 is vulnerable to Commad Injection.

D-Link DIR-816 A2 1.10 B05 was discovered to contain a stack overflow via the pskValue parameter in the setSecurity function.

D-Link DIR-816 A2 1.10 B05 was discovered to contain a stack overflow via the wizardstep4_pskpwd parameter at /goform/form2WizardStep4.

An issue in dlink DIR 823x 240802 allows a remote attacker to execute arbitrary code via the target_addr key value and the function 0x41710c

Incorrect access control in the DELT_file.xgi endpoint of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows attackers to modify arbitrary settings within the device's XML database, including the administrator’s password.

An issue in dlink DIR 832x 240802 allows a remote attacker to execute arbitrary code via the macaddr key value to the function 0x42232c

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-859 1.06B01. It has been rated as critical. Affected by this issue is some unknown functionality of the file /hedwig.cgi of the component HTTP POST Request Handler. The manipulation of the argument service with the input ../../../../htdocs/webinc/getcfg/DHCPS6.BRIDGE-1.xml leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-251666 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

The D-Link DSR-250 (3.14) DSR-1000N (2.11B201) UPnP service contains a command injection vulnerability, which can cause remote command execution.

A stack-based buffer overflow vulnerability in the my_cgi.cgi component of certain D-Link devices, including the DSP-W215 version 1.02, can be exploited via a specially crafted HTTP POST request to the /common/info.cgi endpoint. This flaw enables an unauthenticated attacker to achieve remote code execution with system-level privileges.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

D-Link DIR-100 4.03B07 has PPTP and poe information disclosure

A vulnerability, which was classified as critical, was found in D-Link DAP-1620 1.03. This affects the function check_dws_cookie of the file /storage of the component Cookie Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DAP-1620 1.03. Affected by this issue is the function set_ws_action of the file /dws/api/ of the component Path Handler. The manipulation leads to heap-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in soap.cgi?service=WANIPConn1 on D-Link DIR-845 before v1.02b03, DIR-600 before v2.17b01, DIR-645 before v1.04b11, DIR-300 rev. B, and DIR-865 devices. There is Command Injection via shell metacharacters in the NewInternalClient, NewExternalPort, or NewInternalPort element of a SOAP POST request.

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a stack-based buffer overflow vulnerability via the Password parameter in the SetDynamicDNSSettings module.

A vulnerability classified as critical has been found in D-Link DIR-823G 1.0.2B05_20181207. Affected is the function SetDDNSSettings of the file /HNAP1/ of the component DDNS Service. The manipulation of the argument SOAPAction leads to improper authorization. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Multiple SQL injection vulnerabilities in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allow remote attackers to execute arbitrary SQL commands via the password to (1) the login.authenticate function in share/lua/5.1/teamf1lualib/login.lua or (2) captivePortal.lua.

An issue in D-Link DWR-M972V 1.05SSG allows a remote attacker to execute arbitrary code via SSH using root account without restrictions

A vulnerability was found in D-Link DIR-823G 1.0.2B05_20181207. It has been rated as critical. This issue affects the function SetAutoRebootSettings/SetClientInfo/SetDMZSettings/SetFirewallSettings/SetParentsControlInfo/SetQoSSettings/SetVirtualServerSettings of the file /HNAP1/ of the component Web Management Interface. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been rated as critical. Affected by this issue is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument group leads to os command injection. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-320, DNS-320LW, DNS-325 and DNS-340L up to 20241028. It has been declared as critical. Affected by this vulnerability is the function cgi_user_add of the file /cgi-bin/account_mgr.cgi?cmd=cgi_user_add. The manipulation of the argument name leads to os command injection. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been rated as critical. Affected by this issue is the function dbsrv_asp of the file /dbsrv.asp. The manipulation of the argument str leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A security issue exists in D-Link D-View 8 v2.0.2.89 and prior that could allow an attacker to manipulate the probe inventory of the D-View service. This could result in the disclosure of information from other probes, denial of service conditions due to the probe inventory becoming full, or the execution of tasks on other probes.

A flaw has been found in D-Link DI-7100G C1 up to 20250928. This vulnerability affects the function sub_4C0990 of the file /webchat/login.cgi of the component jhttpd. Executing manipulation of the argument openid can lead to buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used.

The web service of certain models of D-Link wireless routers contains a Stack-based Buffer Overflow vulnerability, which allows unauthenticated remote attackers to exploit this vulnerability to execute arbitrary code on the device.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. A hard-coded account allows management-interface login with high privileges. The logged-in user can perform critical tasks and take full control of the device.

A stack-based buffer overflow was found on the D-Link DIR-842 REVC with firmware v3.13B09 HOTFIX due to the use of strcpy for LOGINPASSWORD when handling a POST request to the /MTFWU endpoint.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. A cfm UDP service listening on port 65002 allows remote, unauthenticated exfiltration of administrative credentials.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

D-Link DIR-615 devices have a buffer overflow via a long Authorization HTTP header.

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a stack-based buffer overflow vulnerability via the Password parameter in the SetWanSettings module.

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

A vulnerability was found in D-Link DCS-935L up to 1.13.01. The impacted element is the function sub_402280 of the file /HNAP1/. The manipulation of the argument HNAP_AUTH/SOAPAction results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the curTime parameter on login.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary code as root via HNAP1/control/SetGuestWLanSettings.php.

A weakness has been identified in D-Link DI-7001 MINI 24.04.18B1. Impacted is an unknown function of the file /upgrade_filter.asp. This manipulation of the argument path causes os command injection. The attack may be initiated remotely. The exploit has been made available to the public and could be exploited.

A vulnerability was determined in D-Link DIR-823X up to 250416. Affected by this vulnerability is the function sub_415028 of the file /goform/set_static_leases. Executing manipulation of the argument Hostname can lead to command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

D-Link DI-8200 16.07.26A1 is vulnerable to remote command execution in the msp_info_htm function via the flag parameter and cmd parameter.

D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DAR-7000-40 V31R02B1413C and classified as critical. This vulnerability affects unknown code of the file /firewall/urlblist.php. The manipulation of the argument file leads to unrestricted upload. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-264532. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_move_photo of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument photo_name leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

Authentication Bypass vulnerability in D-Link DIR-645 firmware version 1.03 allows remote attackers to gain escalated privileges via function phpcgi_main in cgibin. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Authentication Bypass vulnerability in D-Link DIR-895 FW102b07 allows remote attackers to gain escalated privileges via via function phpcgi_main in cgibin. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been declared as critical. This vulnerability affects the function cgi_FMT_R5_SpareDsk_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a command injection vulnerability via the ST parameter in the lxmldbc_system() function.

A stack overflow vulnerability exists in the sub_402280 function of the HNAP service of D-Link DCS-960L 1.09, allowing an attacker to execute arbitrary code.

D-link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img is vulnerable to Buffer Overflow via /goform/addRouting.