GeoServer is an open source server that allows users to share and edit geospatial data. Prior to versions 2.23.5 and 2.24.3, if GeoServer is deployed in the Windows operating system using an Apache Tomcat web application server, it is possible to bypass existing input validation in the GeoWebCache ByteStreamController class and read arbitrary classpath resources with specific file name extensions. If GeoServer is also deployed as a web archive using the data directory embedded in the `geoserver.war` file (rather than an external data directory), it will likely be possible to read specific resources to gain administrator privileges. However, it is very unlikely that production environments will be using the embedded data directory since, depending on how GeoServer is deployed, it will be erased and re-installed (which would also reset to the default password) either every time the server restarts or every time a new GeoServer WAR is installed and is therefore difficult to maintain. An external data directory will always be used if GeoServer is running in standalone mode (via an installer or a binary). Versions 2.23.5 and 2.24.3 contain a patch for the issue. Some workarounds are available. One may change from a Windows environment to a Linux environment; or change from Apache Tomcat to Jetty application server. One may also disable anonymous access to the embeded GeoWebCache administration and status pages.

An issue was discovered in Veritas NetBackup through 10.0.0.1 and related Veritas products. The NetBackup Primary server is vulnerable to a Path traversal attack through the DiscoveryService service.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in BoldGrid Total Upkeep allows Relative Path Traversal.This issue affects Total Upkeep: from n/a through 1.15.8.

Path Traversal in WellKnownServlet in GitHub repository jgraph/drawio prior to 18.0.5. Read local files of the web application.

EMC Data Protection Advisor 6.1.x, EMC Data Protection Advisor 6.2, EMC Data Protection Advisor 6.2.1, EMC Data Protection Advisor 6.2.2, EMC Data Protection Advisor 6.2.3 prior to patch 446 has a path traversal vulnerability that may potentially be exploited by malicious users to compromise the affected system.

In Delta Electronics InfraSuite Device Master versions prior to 1.0.5, an attacker could use URL decoding to retrieve system files, credentials, and bypass authentication resulting in privilege escalation.

Path Traversal vulnerability in Tunis Soft "Product Designer" (productdesigner) module for PrestaShop before version 1.178.36, allows a remote attacker to escalate privileges and obtain sensitive information via the ajaxProcessCropImage() method.

aiohttp is an asynchronous HTTP client/server framework for asyncio and Python. When using aiohttp as a web server and configuring static routes, it is necessary to specify the root path for static files. Additionally, the option 'follow_symlinks' can be used to determine whether to follow symbolic links outside the static root directory. When 'follow_symlinks' is set to True, there is no validation to check if reading a file is within the root directory. This can lead to directory traversal vulnerabilities, resulting in unauthorized access to arbitrary files on the system, even when symlinks are not present. Disabling follow_symlinks and using a reverse proxy are encouraged mitigations. Version 3.9.2 fixes this issue.

IBM Spectrum Protect Plus 10.1.6 through 10.1.11 Microsoft File Systems restore operation can download any file on the target machine by manipulating the URL with a directory traversal attack. This results in the restore operation gaining access to files which the operator should not have access to. IBM X-Force ID: 235873.

A Directory Traversal issue was discovered in process_post on Draytek Vigor3910 4.3.2.5 devices. When sending a certain POST request, it calls the function and exports information.

A vulnerability, which was classified as critical, has been found in Ultimate Member Plugin up to 2.5.0. This issue affects the function load_template of the file includes/core/class-shortcodes.php of the component Template Handler. The manipulation of the argument tpl leads to pathname traversal. The attack may be initiated remotely. Upgrading to version 2.5.1 is able to address this issue. The name of the patch is e1bc94c1100f02a129721ba4be5fbc44c3d78ec4. It is recommended to upgrade the affected component. The identifier VDB-213545 was assigned to this vulnerability.

Twig is a template language for PHP. Versions 1.x prior to 1.44.7, 2.x prior to 2.15.3, and 3.x prior to 3.4.3 encounter an issue when the filesystem loader loads templates for which the name is a user input. It is possible to use the `source` or `include` statement to read arbitrary files from outside the templates' directory when using a namespace like `@somewhere/../some.file`. In such a case, validation is bypassed. Versions 1.44.7, 2.15.3, and 3.4.3 contain a fix for validation of such template names. There are no known workarounds aside from upgrading.

Gin-vue-admin is a backstage management system based on vue and gin, which separates the front and rear of the full stack. Gin-vue-admin prior to 2.5.4 is vulnerable to path traversal, which leads to file upload vulnerabilities. Version 2.5.4 contains a patch for this issue. There are no workarounds aside from upgrading to a patched version.

Directory Traversal Vulnerability in LiveConfig before v.2.5.2 allows a remote attacker to obtain sensitive information via a crafted request to the /static/ endpoint.

McWebserver mod runs a simple HTTP server alongside the Minecraft server in seperate threads. Path traversal in McWebserver Minecraft Mod for Fabric and Quilt up to and including 0.1.2.1 and McWebserver Minecraft Mod for Forge up to and including 0.1.1 allows all files, accessible by the program, to be read by anyone via HTTP request. Version 0.2.0 with patches are released to both platforms (Fabric and Quilt, Forge). As a workaround, the McWebserver mod can be disabled by removing the file from the `mods` directory.

Italtel NetMatch-S CI 5.2.0-20211008 allows Absolute Path Traversal under NMSCI-WebGui/SaveFileUploader. An unauthenticated user can upload files to an arbitrary path. An attacker can change the uploadDir parameter in a POST request (not possible using the GUI) to an arbitrary directory. Because the application does not check in which directory a file will be uploaded, an attacker can perform a variety of attacks that can result in unauthorized access to the server.

A vulnerability was found in ZKTeco ZKBio Media 2.0.0_x64_2024-01-29-1028. It has been classified as problematic. Affected is an unknown function of the file /pro/common/download of the component Service Port 9999. The manipulation of the argument fileName with the input ../../../../zkbio_media.sql leads to path traversal: '../filedir'. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.3 Build 2025-05-26-1605 is able to address this issue. It is recommended to upgrade the affected component.

An issue in the IGB Files and OutfileService features of SmartVista Cardgen v3.28.0 allows attackers to list and download arbitrary files via modifying the PATH parameter.

The number identification module has a path traversal vulnerability. Successful exploitation of this vulnerability may cause data disclosure.

Hertz v0.3.0 ws discovered to contain a path traversal vulnerability via the normalizePath function.

IBM Maximo Application Suite 8.10 and 8.11 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. IBM X-Force ID: 279950.

MelisAssetManager provides deliveries of Melis Platform's assets located in every module's public folder. Attackers can read arbitrary files on affected versions of `melisplatform/melis-asset-manager`, leading to the disclosure of sensitive information. Conducting this attack does not require authentication. Users should immediately upgrade to `melisplatform/melis-asset-manager` >= 5.0.1. This issue was addressed by restricting access to files to intended directories only.

Neo4j APOC (Awesome Procedures on Cypher) before 4.3.0.7 and 4.x before 4.4.0.8 allows Directory Traversal to sibling directories via apoc.log.stream.

Adobe ColdFusion versions Update 14 (and earlier) and Update 4 (and earlier) are affected by an Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability that could result in information disclosure. Exploitation of this issue does not require user interaction.

There is a path traversal vulnerability in Esri ArcGIS Server versions 10.9.1 and below. Successful exploitation may allow a remote, unauthenticated attacker traverse the file system to access files outside of the intended directory on ArcGIS Server. This could lead to the disclosure of sensitive site configuration information (not user datasets).

In some non-default installations of Esri Portal for ArcGIS versions 10.9.1 and below, a directory traversal issue may allow a remote, unauthenticated attacker to traverse the file system and lead to the disclosure of sensitive data (not customer-published content).

Directory Traversal vulnerability in Qiyu iFair version 23.8_ad0 and before, allows remote attackers to obtain sensitive information via uploadimage component.

A potential security vulnerability has been identified in HPE OfficeConnect 1820, and 1850 switch series. The vulnerability could be remotely exploited to allow remote directory traversal in HPE OfficeConnect 1820 switch series version PT.02.17 and below, HPE OfficeConnect 1850 switch series version PC.01.23 and below, and HPE OfficeConnect 1850 (10G aggregator) switch version PO.01.22 and below.

Zentao Demo15 is vulnerable to Directory Traversal. The impact is: obtain sensitive information (remote). The component is: URL : view-source:https://demo15.zentao.pm/user-login.html/zentao/index.php?mode=getconfig.

Path traversal in the static file service in Iodine less than 0.7.33 allows an unauthenticated, remote attacker to read files outside the public folder via malicious URLs.

Payara through 5.2022.2 allows directory traversal without authentication. This affects Payara Server, Payara Micro, and Payara Server Embedded.

Wikmd is a file based wiki that uses markdown. Prior to version 1.7.1, Wikmd is vulnerable to path traversal when accessing `/list/<path:folderpath>` and discloses lists of files located on the server including sensitive data. Version 1.7.1 fixes this issue.

FLIR AX8 thermal sensor cameras version up to and including 1.46.16 is vulnerable to Directory Traversal due to an improper access restriction. An unauthenticated, remote attacker can exploit this by sending a URI that contains directory traversal characters to disclose the contents of files located outside of the server's restricted path.

Sanic is an opensource python web server/framework. Affected versions of sanic allow access to lateral directories when using `app.static` if using encoded `%2F` URLs. Parent directory traversal is not impacted. Users are advised to upgrade. There is no known workaround for this issue.

The vulnerability was found in Moodle, occurs due to input validation error when importing lesson questions. This insufficient path checks results in arbitrary file read risk. This vulnerability allows a remote attacker to perform directory traversal attacks. The capability to access this feature is only available to teachers, managers and admins by default.

Path Traversal in GitHub repository ikus060/rdiffweb prior to 2.4.10.

An issue in /admin/index.php?n=system&c=filept&a=doGetFileList of Metinfo v7.0.0 allows attackers to perform a directory traversal and access sensitive information.

The Managentities plugin before 4.0.2 for GLPI allows reading local files via directory traversal in the inc/cri.class.php file parameter.

NASA cFS (Core Flight System) Aquila is vulnerable to path traversal in the OSAL module, allowing the override of any arbitrary file on the system.

Absolute path traversal in Ivanti EPM before the 2024 January-2025 Security Update and 2022 SU6 January-2025 Security Update allows a remote unauthenticated attacker to leak sensitive information.

Versions of the package spatie/browsershot before 5.0.2 are vulnerable to Directory Traversal due to URI normalisation in the browser where the file:// check can be bypassed with file:\\. An attacker could read any file on the server by exploiting the normalization of \ into /.

Jenkins Embeddable Build Status Plugin 2.0.3 and earlier allows specifying a `style` query parameter that is used to choose a different SVG image style without restricting possible values, resulting in a relative path traversal vulnerability that allows attackers without Overall/Read permission to specify paths to other SVG images on the Jenkins controller file system.

A vulnerability was found in Inis up to 2.0.1. It has been rated as problematic. This issue affects some unknown processing of the file /app/api/controller/default/File.php of the component GET Request Handler. The manipulation of the argument path leads to path traversal: '../filedir'. The exploit has been disclosed to the public and may be used. The identifier VDB-250109 was assigned to this vulnerability.

Directory traversal vulnerability in the TAP plugin before 1.25 in Jenkins allows remote attackers to read arbitrary files via an unspecified parameter.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Carlo Gavazzi Powersoft up to version 2.1.1.1 allows an unauthenticated, remote attacker to download any file from the affected device.

The Simple File List WordPress plugin is vulnerable to Arbitrary File Download via the eeFile parameter found in the ~/includes/ee-downloader.php file due to missing controls which makes it possible unauthenticated attackers to supply a path to a file that will subsequently be downloaded, in versions up to and including 3.2.7.

Grafana 8.4.3 allows reading files via (for example) a /dashboard/snapshot/%7B%7Bconstructor.constructor'/.. /.. /.. /.. /.. /.. /.. /.. /etc/passwd URI. NOTE: the vendor's position is that there is no vulnerability; this request yields a benign error page, not /etc/passwd content

gradio-app/gradio is vulnerable to a local file inclusion vulnerability due to improper validation of user-supplied input in the UploadButton component. Attackers can exploit this vulnerability to read arbitrary files on the filesystem, such as private SSH keys, by manipulating the file path in the request to the `/queue/join` endpoint. This issue could potentially lead to remote code execution. The vulnerability is present in the handling of file upload paths, allowing attackers to redirect file uploads to unintended locations on the server.

A path traversal vulnerability exists in the mlflow/mlflow repository due to improper handling of URL parameters. By smuggling path traversal sequences using the ';' character in URLs, attackers can manipulate the 'params' portion of the URL to gain unauthorized access to files or directories. This vulnerability allows for arbitrary data smuggling into the 'params' part of the URL, enabling attacks similar to those described in previous reports but utilizing the ';' character for parameter smuggling. Successful exploitation could lead to unauthorized information disclosure or server compromise.