An issue was discovered in Django v5.1.1, v5.0.9, and v4.2.16. The django.contrib.auth.forms.PasswordResetForm class, when used in a view implementing password reset flows, allows remote attackers to enumerate user e-mail addresses by sending password reset requests and observing the outcome (only when e-mail sending is consistently failing).

The login function of Mealie v1.0.0beta-2 allows attackers to enumerate existing usernames by timing the server's response time.

Zitadel is an open source identity management system. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". Due to a implementation change to prevent deadlocks calling the database, the flag would not be correctly respected in all cases and an attacker would gain information if an account exist within ZITADEL, since the error message shows "object not found" instead of the generic error message. This vulnerability is fixed in 2.58.1, 2.57.1, 2.56.2, 2.55.5, 2.54.8, and 2.53.9.

In veilid-core in Veilid before 0.3.4, the protocol's ping function can be misused in a way that decreases the effectiveness of safety and private routes.

In Talend Administration Center 7.3.1.20200219 before TAC-15950, the Forgot Password feature provides different error messages for invalid reset attempts depending on whether the email address is associated with any account. This allows remote attackers to enumerate accounts via a series of requests.

Observable Response Discrepancy vulnerability in Tridium Niagara Framework on Windows, Linux, QNX, Tridium Niagara Enterprise Security on Windows, Linux, QNX allows Cryptanalysis. This issue affects Niagara Framework: before 4.14.2, before 4.15.1, before 4.10.11; Niagara Enterprise Security: before 4.14.2, before 4.15.1, before 4.10.11.Tridium recommends upgrading to Niagara Framework and Enterprise Security versions 4.14.2u2, 4.15.u1, or 4.10u.11.

In the Twilio Authy API, accessed by Authy Android before 25.1.0 and Authy iOS before 26.1.0, an unauthenticated endpoint provided access to certain phone-number data, as exploited in the wild in June 2024. Specifically, the endpoint accepted a stream of requests containing phone numbers, and responded with information about whether each phone number was registered with Authy. (Authy accounts were not compromised, however.)

Thinfinity VirtualUI before 3.0 allows a malicious actor to enumerate users registered in the OS (Windows) through the /changePassword URI. By accessing the vector, an attacker can determine if a username exists thanks to the message returned; it can be presented in different languages according to the configuration of VirtualUI. Common users are administrator, admin, guest and krgtbt.

Shenzhen Guoxin Synthesis image system before 8.3.0 allows username enumeration because of the response discrepancy of incorrect versus error.

Matrix Tafnit v8 - CWE-204: Observable Response Discrepancy

An observable response discrepancy vulnerability [CWE-204] in FortiClientEMS 7.4.0, 7.2.0 through 7.2.4, 7.0 all versions, and FortiSOAR 7.5.0, 7.4.0 through 7.4.4, 7.3.0 through 7.3.2, 7.2 all versions, 7.0 all versions, 6.4 all versions may allow an unauthenticated attacker to enumerate valid users via observing login request responses.

In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.109, an attacker could determine whether or not another user exists on the instance by deciphering the error response that they would likely receive from the instance when they attempt to log in. This disclosure could then lead to additional brute-force password-guessing attacks. This vulnerability would require that the Splunk platform instance uses the Security Assertion Markup Language (SAML) authentication scheme.

During an annual penetration test conducted on behalf of Axis Communications, Truesec discovered a flaw in the VAPIX Device Configuration framework that allowed for unauthenticated username enumeration through the VAPIX Device Configuration SSH Management API.

IBM i 7.2, 7.3, 7.4, and 7.5 Service Tools Server (SST) is vulnerable to SST user enumeration by a remote attacker. This vulnerability can be used by a malicious actor to gather information about SST users that can be targeted in further attacks. IBM X-Force ID: 287538.

An issue was discovered in Aviatrix Controller before 5.4.1204. There is a Observable Response Discrepancy from the API, which makes it easier to perform user enumeration via brute force.

In Logpoint before 7.4.0, an attacker can enumerate a valid list of usernames by using publicly exposed URLs of shared widgets.

Discourse is an open-source discussion platform. Prior to versions 2026.3.0-latest.1, 2026.2.1, and 2026.1.2, unauthenticated users can determine whether a specific user is a member of a private group by observing changes in directory results when using the `exclude_groups` parameter. Versions 2026.3.0-latest.1, 2026.2.1, and 2026.1.2 contain a patch. As a workaround, disable public access to the user directory via Admin → Settings → hide user profiles from public.

Umbraco is an ASP.NET content management system. Umbraco 10 prior to 10.8.4 with access to the native login screen is vulnerable to a possible user enumeration attack. This issue was fixed in version 10.8.5. As a workaround, one may disable the native login screen by exclusively using external logins.

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

A vulnerability in NetCat CMS allows an attacker to send a specially crafted http request that can be used to check whether a user exists in the system, which could be a basis for further attacks. This issue affects NetCat CMS v. 6.4.0.24126.2 and possibly others. Apply patch from vendor https://netcat.ru/ https://netcat.ru/] . Versions 6.4.0.24248 and on have the patch.

A vulnerability has been identified in Desigo DXR2 (All versions < V01.21.142.5-22), Desigo PXC3 (All versions < V01.21.142.4-18), Desigo PXC4 (All versions < V02.20.142.10-10884), Desigo PXC5 (All versions < V02.20.142.10-10884). The login functionality of the application fails to normalize the response times of login attempts performed with wrong usernames with the ones executed with correct usernames. A remote unauthenticated attacker could exploit this side-channel information to perform a username enumeration attack and identify valid usernames.

A vulnerability was found in nasirkhan Laravel Starter up to 11.8.0. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /forgot-password of the component Password Reset Handler. The manipulation of the argument Email leads to observable response discrepancy. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-268784. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Adenza AxiomSL ControllerView through 10.8.1 is vulnerable to user enumeration. An attacker can identify valid usernames on the platform because a failed login attempt produces a different error message when the username is valid.

A website was able to detect when a user took a screenshot of a page using the built-in Screenshot functionality in Firefox. This vulnerability affects Firefox < 127.

GNU GRUB (aka GRUB2) through 2.12 does not use a constant-time algorithm for grub_crypto_memcmp and thus allows side-channel attacks.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15. An Observable Response Discrepancy vulnerability in the sendPasswordReinitLink action of the unlogged.do page allows remote attackers to test whether a username is valid or not. This allows confirmation of valid usernames.

REDCap 14.3.13 allows an attacker to enumerate usernames due to an observable discrepancy between login attempts.

SummaryThis advisory addresses a security vulnerability in Mautic related to the "Forget your password" functionality. This vulnerability could be exploited by unauthenticated users to enumerate valid usernames. User Enumeration via Timing Attack: A user enumeration vulnerability exists in the "Forget your password" functionality. Differences in response times for existing and non-existing users, combined with a lack of request limiting, allow an attacker to determine the existence of usernames through a timing-based attack. MitigationPlease update to a version that addresses this timing vulnerability, where password reset responses are normalized to respond at the same time regardless of user existence.

Jenkins Configuration as Code Plugin 1.55 and earlier used a non-constant time comparison function when validating an authentication token allowing attackers to use statistical methods to obtain a valid authentication token.

Dependency-Track is a Component Analysis platform that allows organizations to identify and reduce risk in the software supply chain. Performing a login request against the /api/v1/user/login endpoint with a username that exist in the system takes significantly longer than performing the same action with a username that is not known by the system. The observable difference in request duration can be leveraged by actors to enumerate valid names of managed users. LDAP and OpenID Connect users are not affected. The issue has been fixed in Dependency-Track 4.12.2.

Flask-AppBuilder is an application development framework, built on top of the Flask web framework. In affected versions there exists a user enumeration vulnerability. This vulnerability allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Users are advised to upgrade to version 3.4.4 as soon as possible. There are no known workarounds for this issue.

In NocoDB, versions 0.9 to 0.83.8 are vulnerable to Observable Discrepancy in the password-reset feature. When requesting a password reset for a given email address, the application displays an error message when the email isn't registered within the system. This allows attackers to enumerate the registered users' email addresses.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

By checking the result of calls to `window.open` with specifically set protocol handlers, an attacker could determine if the application which implements that protocol handler is installed. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Thunderbird < 128.3, and Thunderbird < 131.

ZimaOS is a fork of CasaOS, an operating system for Zima devices and x86-64 systems with UEFI. In version 1.2.4 and all prior versions, the API endpoint `http://<Server-IP>/v1/users/login` in ZimaOS returns distinct responses based on whether a username exists or the password is incorrect. This behavior can be exploited for username enumeration, allowing attackers to determine whether a user exists in the system or not. Attackers can leverage this information in further attacks, such as credential stuffing or targeted password brute-forcing. As of time of publication, no known patched versions are available.

A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to perform a timing attack. This vulnerability is due to insufficient protection of a system password. An attacker could exploit this vulnerability by observing the time it takes the system to respond to various queries. A successful exploit could allow the attacker to determine a sensitive system password.

All CODESYS Visualization versions before V4.2.0.0 generate a login dialog vulnerable to information exposure allowing a remote, unauthenticated attacker to enumerate valid users.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

A username enumeration vulnerability exists in multiple WSO2 products when Multi-Attribute Login is enabled. In this configuration, the system returns a distinct "User does not exist" error message to the login form, regardless of the validate_username setting. This behavior allows malicious actors to determine which usernames exist in the system based on observable discrepancies in the application's responses. Exploitation of this vulnerability could aid in brute-force attacks, targeted phishing campaigns, or other social engineering techniques by confirming the validity of user identifiers within the system.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

An issue was discovered in eZ Publish Ibexa Kernel before 7.5.15.1. The /user/sessions endpoint can be abused to determine account existence.

The password-reset form in ServiceNow Orlando provides different responses to invalid authentication attempts depending on whether the username exists.

An user enumeration vulnerability was found in SEO Panel 4.10.0. This issue occurs during user authentication, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

Observable discrepancies in the login process allow an attacker to guess legitimate user names registered in the BMC. This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to versions 8.6.54 and 9.6.0-alpha.43, an attacker can subscribe to LiveQuery with a watch parameter targeting a protected field. Although the protected field value is properly stripped from event payloads, the presence or absence of update events reveals whether the protected field changed, creating a binary oracle. For boolean protected fields, the timing of change events is equivalent to knowing the field value. This issue has been patched in versions 8.6.54 and 9.6.0-alpha.43.

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the identification of the correct tenant for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

Proxmox VE prior to 3.2: 'AccessControl.pm' User Enumeration Vulnerability

Dalmark Systems Systeam 2.22.8 build 1724 is vulnerable to User enumeration. The Systeam application is an ERP system that uses a mixed architecture based on SaaS tenant and user management, and on-premise database and web application counterparts. This issue occurs during the password recovery procedure for a given user, where a difference in messages could allow an attacker to determine if the given user is valid or not, enabling a brute force attack with valid users.

In Cibele Thinfinity VirtualUI before 3.0, /changePassword returns different responses for invalid authentication requests depending on whether the username exists.