Umbraco is a free and open source .NET content management system. Prior to versions 10.8.10 and 13.8.1, based on an analysis of the timing of post login API responses, it's possible to determine whether an account exists. The issue is patched in versions 10.8.10 and 13.8.1. No known workarounds are available.

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

Umbraco is an ASP.NET CMS. In versions 13.0.0 through 13.9.2, 15.0.0 through 15.4.1 and 16.0.0 through 16.1.0, the content delivery API can be restricted from public access where an API key must be provided in a header to authorize the request. It's also possible to configure output caching, such that the delivery API outputs will be cached for a period of time, improving performance. There's an issue when these two things are used together, where caching doesn't vary by the header that contains the API key. As such, it's possible for a user without a valid API key to retrieve a response for a given path and query if it has recently been requested and cached by request with a valid key. This is fixed in versions 13.9.3, 15.4.4 and 16.1.1.

Umbraco, a free and open source .NET content management system, has a vulnerability in versions 10.0.0 through 10.8.10 and 13.0.0 through 13.9.1. Via a request to an anonymously authenticated endpoint it's possible to retrieve information about the configured password requirements. The information available is limited but would perhaps give some additional detail useful for someone attempting to brute force derive a user's password. This information was not exposed in Umbraco 7 or 8, nor in 14 or higher versions. The vulnerability is patched in versions 10.8.11 and 13.9.2.

Umbraco is an ASP.NET content management system (CMS). Starting in version 8.0.0 and prior to versions 8.18.10, 10.8.1, and 12.3.4, a user enumeration attack is possible when SMTP is not set up correctly, but reset password is enabled. Versions 8.18.10, 10.8.1, and 12.3.4 contain a patch for this issue.

UmbracoIdentityExtensions is an Umbraco add-on package that enables easy extensibility points for ASP.Net Identity integration. In affected versions client secrets are not required which may expose some endpoints to untrusted actors. Since Umbraco is not a single-page application, the implicit flow is not safe. For traditional MVC applications, it is recommended to use the authorization code flow, which requires the client to authenticate with the authorization server using a client secret. This flow provides better security, as it involves exchanging an authorization code for an access token and/or ID token, rather than directly returning tokens in the URL fragment. This issue has been patched in commit `e792429f9` and a release to Nuget is pending. Users are advised to upgrade when possible.

Umbraco is an ASP.NET content management system (CMS). Starting in version 8.0.0 and prior to versions 8.18.10, 10.8.1, and 12.3.4, a brute force exploit can be used to collect valid usernames. Versions 8.18.10, 10.8.1, and 12.3.4 contain a patch for this issue.

Umbraco is an ASP.NET CMS. Failing webhooks logs are available when solution is not in debug mode. Those logs can contain information that is critical. This vulnerability is fixed in 13.1.1.

Umbraco is an ASP.NET CMS. Some endpoints in the Management API can return stack trace information, even when Umbraco is not in debug mode. This vulnerability is fixed in 14.1.2.

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

A vulnerability, which was classified as problematic, was found in viafintech Barzahlen Payment Module PHP SDK up to 2.0.0. Affected is the function verify of the file src/Webhook.php. The manipulation leads to observable timing discrepancy. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 2.0.1 is able to address this issue. The patch is identified as 3e7d29dc0ca6c054a6d6e211f32dae89078594c1. It is recommended to upgrade the affected component. VDB-217650 is the identifier assigned to this vulnerability.

Observable Timing Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

A security flaw has been discovered in Portabilis i-Diario up to 1.5.0. Affected by this vulnerability is an unknown functionality of the file /password/email of the component Password Recovery Endpoint. The manipulation results in observable response discrepancy. It is possible to launch the attack remotely. This attack is characterized by high complexity. The exploitation appears to be difficult. The exploit has been released to the public and may be exploited.

User enumeration vulnerability in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 8, 7.2 before fix pack 20, and older unsupported versions allows remote attackers to determine if an account exist in the application by comparing the request's response time.

Observable Discrepancy in GitHub repository healthchecks/healthchecks prior to v2.6.

User enumeration can occur in the Authentication REST API in Delinea PAM Secret Server 11.4. This allows a remote attacker to determine whether a user is valid because of a difference in responses from the /oauth2/token endpoint.

A vulnerability has been found in Surya2Developer Hostel Management Service 1.0 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /check_availability.php of the component HTTP POST Request Handler. The manipulation of the argument oldpassword leads to observable response discrepancy. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-256891.

Liferay Portal 7.2.0 through 7.4.1, and older unsupported versions, and Liferay DXP 7.3 before service pack 3, 7.2 before fix pack 18, and older unsupported versions returns with different responses depending on whether a site does not exist or if the user does not have permission to access the site, which allows remote attackers to discover the existence of sites by enumerating URLs. This vulnerability occurs if locale.prepend.friendly.url.style=2 and if a custom 404 page is used.

A timing side channel in Vault and Vault Enterprise’s (“Vault”) userpass auth method allowed an attacker to distinguish between existing and non-existing users, and potentially enumerate valid usernames for Vault’s Userpass auth method. Fixed in Vault Community Edition 1.20.1 and Vault Enterprise 1.20.1, 1.19.7, 1.18.12, and 1.16.23.

The open-source identity infrastructure software Zitadel allows administrators to disable the user self-registration. Versions 4.0.0 to 4.0.2, 3.0.0 to 3.3.6, and all versions prior to 2.71.15 are vulnerable to a username enumeration issue in the login interface. The login UI includes a security feature, Ignoring unknown usernames, that is intended to prevent username enumeration by returning a generic response for both valid and invalid usernames. This vulnerability allows an unauthenticated attacker to bypass this protection by submitting arbitrary userIDs to the select account page and distinguishing between valid and invalid accounts based on the system's response. For effective exploitation, an attacker needs to iterate through possible userIDs, but the impact can be limited by implementing rate limiting or similar measures. The issue has been patched in versions 4.0.3, 3.4.0, and 2.71.15.

An user enumeration vulnerability was found in SEO Panel 4.10.0. This issue occurs during user authentication, where a difference in error messages could allow an attacker to determine if a username is valid or not, enabling a brute-force attack with valid usernames.

The vantage6 technology enables to manage and deploy privacy enhancing technologies like Federated Learning (FL) and Multi-Party Computation (MPC). It is possible to find out usernames from the response time of login requests. This could aid attackers in credential attacks. Version 4.2.0 patches this vulnerability.

Pimcore is an open source data & experience management platform. In versions prior to 10.1.3, it is possible to enumerate usernames via the forgot password functionality. This issue is fixed in version 10.1.3. As a workaround, one may apply the available patch manually.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 0.1.0 through 2.3.1, when using OpenBao's userpass auth method, user enumeration was possible due to timing difference between non-existent users and users with stored credentials. This is independent of whether the supplied credentials were valid for the given user. This issue was fixed in version 2.3.2. To work around this issue, users may use another auth method or apply rate limiting quotas to limit the number of requests in a period of time: https://openbao.org/api-docs/system/rate-limit-quotas/.

OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows an unauthenticated, remote attacker to query the /App/CreateRequest.aspx endpoint to check for the existence of valid usernames. There are no rate-limiting mechanisms in place.

A vulnerability classified as problematic has been found in langhsu Mblog Blog System 3.5.0. Affected is an unknown function of the file /login. The manipulation leads to observable response discrepancy. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic was found in funnyzpc Mee-Admin up to 1.6. This vulnerability affects unknown code of the file /mee/login of the component Login. The manipulation of the argument username leads to observable response discrepancy. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

Kanboard is project management software that focuses on the Kanban methodology. Prior to version 1.2.46, Kanboard is vulnerable to username enumeration and IP spoofing-based brute-force protection bypass. By analyzing login behavior and abusing trusted HTTP headers, an attacker can determine valid usernames and circumvent rate-limiting or blocking mechanisms. Any organization running a publicly accessible Kanboard instance is affected, especially if relying on IP-based protections like Fail2Ban or CAPTCHA for login rate-limiting. Attackers with access to the login page can exploit this flaw to enumerate valid usernames and bypass IP-based blocking mechanisms, putting all user accounts at higher risk of brute-force or credential stuffing attacks. Version 1.2.46 contains a patch for the issue.

The Page Restriction WordPress (WP) – Protect WP Pages/Post plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.3.6 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to higher-level roles such as administrator.

Tuleap is an Open Source Suite created to facilitate management of software development and collaboration. In Tuleap Community Edition prior to version 16.9.99.1750843170 and Tuleap Enterprise Edition prior to 16.8-4 and 16.9-2, the forgot password form allows for user enumeration. This is fixed in Tuleap Community Edition version 16.9.99.1750843170 and Tuleap Enterprise Edition 16.8-4 and 16.9-2.

Meow hash 0.5/calico does not sufficiently thwart key recovery by an attacker who can query whether there's a collision in the bottom bits of the hashes of two messages, as demonstrated by an attack against a long-running web service that allows the attacker to infer collisions by measuring timing differences.

User enumeration vulnerability in Devklan's Alma Blog that affects versions 2.1.10 and earlier. This vulnerability could allow a remote user to retrieve all valid users registered in the application just by looking at the request response.

For failed login attempts, the application returns different error messages depending on whether the login failed due to an incorrect password or a non-existing username. This allows an attacker to guess usernames until they find an existing one.

Under certain circumstances a CCURE Portal user could enumerate user accounts in CCURE 9000 version 2.90 and prior versions.

Failed login response could be different depending on whether the username was local or central.

Using iterative requests an attacker was able to learn the size of an opaque response, as well as the contents of a server-supplied Vary header. This vulnerability affects Firefox < 119.

A vulnerability has been identified in Mendix Runtime V10 (All versions < V10.17.0 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.12 (All versions < V10.12.11 only if the basic authentication mechanism is used by the application), Mendix Runtime V10.6 (All versions < V10.6.19 only if the basic authentication mechanism is used by the application), Mendix Runtime V8 (All versions < V8.18.33 only if the basic authentication mechanism is used by the application), Mendix Runtime V9 (All versions < V9.24.31 only if the basic authentication mechanism is used by the application). The authentication mechanism of affected applications contains an observable response discrepancy vulnerability when validating usernames. This could allow unauthenticated remote attackers to distinguish between valid and invalid usernames.

The Stop User Enumeration WordPress plugin before version 1.7.3 blocks REST API /wp-json/wp/v2/users/ requests for non-authorized users. However, this can be bypassed by URL-encoding the API path.

Observable behavioral discrepancy vulnerability in QSAN Storage Manager allows remote attackers to obtain the system information without permissions. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

A vulnerability, which was classified as problematic, has been found in Antabot White-Jotter up to 0.2.2. This issue affects some unknown processing of the file /login. The manipulation of the argument username leads to observable response discrepancy. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

Redmine before 4.0.9 and 4.1.x before 4.1.3 allows an attacker to learn the values of internal authentication keys by observing timing differences in string comparison operations within SysController and MailHandlerController.

IBM Security Identity Manager 7.0.2 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 200018

UrBackup Server 2.5.31 allows brute-force enumeration of user accounts because a failure message confirms that a username is not valid.

Flask-AppBuilder is a development framework, built on top of Flask. User enumeration in database authentication in Flask-AppBuilder <= 3.2.3. Allows for a non authenticated user to enumerate existing accounts by timing the response time from the server when you are logging in. Upgrade to version 3.3.0 or higher to resolve.

EspoCRM is an Open Source Customer Relationship Management software. Prior to version 9.0.7, users can be sorted by their password hash. This flaw allows an attacker to make assumptions about the hash values of other users stored in the password column of the user table, based on the results of the sorted list of users. Although unlikely, if an attacker knows the hash value of their password, they can change the password and repeat the sorting until the other user's password hash is fully revealed. This issue is patched in version 9.0.7.

A vulnerability has been identified in Mendix Forgot Password (Mendix 10 compatible) (All versions < V5.4.0), Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.3), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.3), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.4.0). Applications using the affected module are vulnerable to user enumeration due to distinguishable responses. This could allow an unauthenticated remote attacker to determine if a user is valid or not, enabling a brute force attack with valid users.

Piccolo is an ORM and query builder which supports asyncio. In versions 0.120.0 and prior, the implementation of `BaseUser.login` leaks enough information to a malicious user such that they would be able to successfully generate a list of valid users on the platform. As Piccolo on its own does not also enforce strong passwords, these lists of valid accounts are likely to be used in a password spray attack with the outcome being attempted takeover of user accounts on the platform. The impact of this vulnerability is minor as it requires chaining with other attack vectors in order to gain more then simply a list of valid users on the underlying platform. The likelihood of this vulnerability is possible as it requires minimal skills to pull off, especially given the underlying login functionality for Piccolo based sites is open source. This issue has been patched in version 0.121.0.

In Directus 8.x through 8.8.1, an attacker can discover whether a user is present in the database through the password reset feature. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Zitadel is open-source identity infrastructure software. ZITADEL administrators can enable a setting called "Ignoring unknown usernames" which helps mitigate attacks that try to guess/enumerate usernames. If enabled, ZITADEL will show the password prompt even if the user doesn't exist and report "Username or Password invalid". While the setting was correctly respected during the login flow, the user's username was normalized leading to a disclosure of the user's existence. This vulnerability is fixed in 2.71.6, 2.70.8, 2.69.9, 2.68.9, 2.67.13, 2.66.16, 2.65.7, 2.64.6, and 2.63.9.

Snipe-IT through 6.0.14 allows attackers to check whether a user account exists because of response variations in a /password/reset request.