A deserialization vulnerability existed in dubbo hessian-lite 3.2.11 and its earlier versions, which could lead to malicious code execution. Most Dubbo users use Hessian2 as the default serialization/deserialization protocol, during Hessian catch unexpected exceptions, Hessian will log out some imformation for users, which may cause remote command execution. This issue affects Apache Dubbo Apache Dubbo 2.6.x versions prior to 2.6.12; Apache Dubbo 2.7.x versions prior to 2.7.15; Apache Dubbo 3.0.x versions prior to 3.0.5.

Deserialization of Untrusted Data vulnerability in Apache InLong. This issue affects Apache InLong: from 1.13.0 through 2.1.0. This vulnerability is a secondary mining bypass for CVE-2024-26579. Users are advised to upgrade to Apache InLong's 2.2.0 or cherry-pick [1] to solve it. [1] https://github.com/apache/inlong/pull/11732

The JMX server embedded in Apache James, also used by the command line client is exposed to a java de-serialization issue, and thus can be used to execute arbitrary commands. As James exposes JMX socket by default only on local-host, this vulnerability can only be used for privilege escalation. Release 3.0.1 upgrades the incriminated library.

An Unsafe Deserialization vulnerability exists in the worker services of the Apache Storm supervisor server allowing pre-auth Remote Code Execution (RCE). Apache Storm 2.2.x users should upgrade to version 2.2.1 or 2.3.0. Apache Storm 2.1.x users should upgrade to version 2.1.1. Apache Storm 1.x users should upgrade to version 1.2.4

A remote code execution vulnerability exists where a malicious Raft node can exploit insecure Hessian deserialization within the PD store. The fix enforces IP-based authentication to restrict cluster membership and implements a strict class whitelist to harden the Hessian serialization process against object injection attacks. Users are recommended to upgrade to version 1.7.0, which fixes the issue.

Apache jUDDI uses several classes related to Java's Remote Method Invocation (RMI) which (as an extension to UDDI) provides an alternate transport for accessing UDDI services. RMI uses the default Java serialization mechanism to pass parameters in RMI invocations. A remote attacker can send a malicious serialized object to the above RMI entries. The objects get deserialized without any check on the incoming data. In the worst case, it may let the attacker run arbitrary code remotely. For both jUDDI web service applications and jUDDI clients, the usage of RMI is disabled by default. Since this is an optional feature and an extension to the UDDI protocol, the likelihood of impact is low. Starting with 3.3.10, all RMI related code was removed.

Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads - attacker knowledge of the names of security sensitive files being uploaded - the security sensitive files also being uploaded via partial PUT If all of the following were true, a malicious user was able to perform remote code execution: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - application was using Tomcat's file based session persistence with the default storage location - application included a library that may be leveraged in a deserialization attack Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue.

The Dubbo Provider will check the incoming request and the corresponding serialization type of this request meet the configuration set by the server. But there's an exception that the attacker can use to skip the security check (when enabled) and reaching a deserialization operation with native java serialization. Apache Dubbo 2.7.13, 3.0.2 fixed this issue by quickly fail when any unrecognized request was found.

Apache Tika before 1.14 allows Java code execution for serialized objects embedded in MATLAB files. The issue exists because Tika invokes JMatIO to do native deserialization.

Apache Airflow, versions before 2.8.1, have a vulnerability that allows a potential attacker to poison the XCom data by bypassing the protection of "enable_xcom_pickling=False" configuration setting resulting in poisoned data after XCom deserialization. This vulnerability is considered low since it requires a DAG author to exploit it. Users are recommended to upgrade to version 2.8.1 or later, which fixes this issue.

CWE-502 Deserialization of Untrusted Data at the eventmesh-meta-raft plugin module in Apache EventMesh master branch without release version on windows\linux\mac os e.g. platforms allows attackers to send controlled message and remote code execute via hessian deserialization rpc protocol. Users can use the code under the master branch in project repo or version 1.11.0 to fix this issue.

Deserialization of Untrusted Data, Improper Input Validation vulnerability in Apache UIMA Java SDK, Apache UIMA Java SDK, Apache UIMA Java SDK, Apache UIMA Java SDK.This issue affects Apache UIMA Java SDK: before 3.5.0. Users are recommended to upgrade to version 3.5.0, which fixes the issue. There are several locations in the code where serialized Java objects are deserialized without verifying the data. This affects in particular: * the deserialization of a Java-serialized CAS, but also other binary CAS formats that include TSI information using the CasIOUtils class; * the CAS Editor Eclipse plugin which uses the the CasIOUtils class to load data; * the deserialization of a Java-serialized CAS of the Vinci Analysis Engine service which can receive using Java-serialized CAS objects over network connections; * the CasAnnotationViewerApplet and the CasTreeViewerApplet; * the checkpointing feature of the CPE module. Note that the UIMA framework by default does not start any remotely accessible services (i.e. Vinci) that would be vulnerable to this issue. A user or developer would need to make an active choice to start such a service. However, users or developers may use the CasIOUtils in their own applications and services to parse serialized CAS data. They are affected by this issue unless they ensure that the data passed to CasIOUtils is not a serialized Java object. When using Vinci or using CasIOUtils in own services/applications, the unrestricted deserialization of Java-serialized CAS files may allow arbitrary (remote) code execution. As a remedy, it is possible to set up a global or context-specific ObjectInputFilter (cf. https://openjdk.org/jeps/290  and  https://openjdk.org/jeps/415 ) if running UIMA on a Java version that supports it. Note that Java 1.8 does not support the ObjectInputFilter, so there is no remedy when running on this out-of-support platform. An upgrade to a recent Java version is strongly recommended if you need to secure an UIMA version that is affected by this issue. To mitigate the issue on a Java 9+ platform, you can configure a filter pattern through the "jdk.serialFilter" system property using a semicolon as a separator: To allow deserializing Java-serialized binary CASes, add the classes: * org.apache.uima.cas.impl.CASCompleteSerializer * org.apache.uima.cas.impl.CASMgrSerializer * org.apache.uima.cas.impl.CASSerializer * java.lang.String To allow deserializing CPE Checkpoint data, add the following classes (and any custom classes your application uses to store its checkpoints): * org.apache.uima.collection.impl.cpm.CheckpointData * org.apache.uima.util.ProcessTrace * org.apache.uima.util.impl.ProcessTrace_impl * org.apache.uima.collection.base_cpm.SynchPoint Make sure to use "!*" as the final component to the filter pattern to disallow deserialization of any classes not listed in the pattern. Apache UIMA 3.5.0 uses tightly scoped ObjectInputFilters when reading Java-serialized data depending on the type of data being expected. Configuring a global filter is not necessary with this version.

JMSAppender in Log4j 1.2 is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration. The attacker can provide TopicBindingName and TopicConnectionFactoryBindingName configurations causing JMSAppender to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-44228. Note this issue only affects Log4j 1.2 when specifically configured to use JMSAppender, which is not the default. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions.

Java object deserialization issue in Jackrabbit webapp/standalone on all platforms allows attacker to remotely execute code via RMIVersions up to (including) 2.20.10 (stable branch) and 2.21.17 (unstable branch) use the component "commons-beanutils", which contains a class that can be used for remote code execution over RMI. Users are advised to immediately update to versions 2.20.11 or 2.21.18. Note that earlier stable branches (1.0.x .. 2.18.x) have been EOLd already and do not receive updates anymore. In general, RMI support can expose vulnerabilities by the mere presence of an exploitable class on the classpath. Even if Jackrabbit itself does not contain any code known to be exploitable anymore, adding other components to your server can expose the same type of problem. We therefore recommend to disable RMI access altogether (see further below), and will discuss deprecating RMI support in future Jackrabbit releases. How to check whether RMI support is enabledRMI support can be over an RMI-specific TCP port, and over an HTTP binding. Both are by default enabled in Jackrabbit webapp/standalone. The native RMI protocol by default uses port 1099. To check whether it is enabled, tools like "netstat" can be used to check. RMI-over-HTTP in Jackrabbit by default uses the path "/rmi". So when running standalone on port 8080, check whether an HTTP GET request on localhost:8080/rmi returns 404 (not enabled) or 200 (enabled). Note that the HTTP path may be different when the webapp is deployed in a container as non-root context, in which case the prefix is under the user's control. Turning off RMIFind web.xml (either in JAR/WAR file or in unpacked web application folder), and remove the declaration and the mapping definition for the RemoteBindingServlet:         <servlet>             <servlet-name>RMI</servlet-name>             <servlet-class>org.apache.jackrabbit.servlet.remote.RemoteBindingServlet</servlet-class>         </servlet>         <servlet-mapping>             <servlet-name>RMI</servlet-name>             <url-pattern>/rmi</url-pattern>         </servlet-mapping> Find the bootstrap.properties file (in $REPOSITORY_HOME), and set         rmi.enabled=false     and also remove         rmi.host         rmi.port         rmi.url-pattern  If there is no file named bootstrap.properties in $REPOSITORY_HOME, it is located somewhere in the classpath. In this case, place a copy in $REPOSITORY_HOME and modify it as explained.

Deserialization of Untrusted Data Vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.4.0 through 1.7.0.  The attacker could bypass the current logic and achieve arbitrary file reading. To solve it, users are advised to upgrade to Apache InLong's 1.8.0 or cherry-pick https://github.com/apache/inlong/pull/8130 .

** UNSUPPORTED WHEN ASSIGNED ** When using the Chainsaw or SocketAppender components with Log4j 1.x on JRE less than 1.7, an attacker that manages to cause a logging entry involving a specially-crafted (ie, deeply nested) hashmap or hashtable (depending on which logging component is in use) to be processed could exhaust the available memory in the virtual machine and achieve Denial of Service when the object is deserialized. This issue affects Apache Log4j before 2. Affected users are recommended to update to Log4j 2.x. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Deserialization of untrusted data in IPC and Parquet readers in the Apache Arrow R package versions 4.0.0 through 16.1.0 allows arbitrary code execution. An application is vulnerable if it reads Arrow IPC, Feather or Parquet data from untrusted sources (for example, user-supplied input files). This vulnerability only affects the arrow R package, not other Apache Arrow implementations or bindings unless those bindings are specifically used via the R package (for example, an R application that embeds a Python interpreter and uses PyArrow to read files from untrusted sources is still vulnerable if the arrow R package is an affected version). It is recommended that users of the arrow R package upgrade to 17.0.0 or later. Similarly, it is recommended that downstream libraries upgrade their dependency requirements to arrow 17.0.0 or later. If using an affected version of the package, untrusted data can read into a Table and its internal to_data_frame() method can be used as a workaround (e.g., read_parquet(..., as_data_frame = FALSE)$to_data_frame()). This issue affects the Apache Arrow R package: from 4.0.0 through 16.1.0. Users are recommended to upgrade to version 17.0.0, which fixes the issue.

A vulnerability was found in zhangyanbo2007 youkefu up to 4.2.0 and classified as problematic. Affected by this issue is the function impsave of the file m\web\handler\admin\system\TemplateController.java. The manipulation of the argument dataFile leads to deserialization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.