The DNS protocol in RFC 1035 and updates allows remote attackers to cause a denial of service (resource consumption) by arranging for DNS queries to be accumulated for seconds, such that responses are later sent in a pulsing burst (which can be considered traffic amplification in some cases), aka the "DNSBomb" issue.

Uncontrolled resource consumption vulnerability in MELSEC iQ-R Series modules (R00/01/02CPU firmware version '19' and earlier, R04/08/16/32/120 (EN) CPU firmware version '51' and earlier, R08/16/32/120SFCPU firmware version '22' and earlier, R08/16/32/120PCPU firmware version '25' and earlier, R08/16/32/120PSFCPU firmware version '06' and earlier, RJ71EN71 firmware version '47' and earlier, RJ71GF11-T2 firmware version '47' and earlier, RJ72GF15-T2 firmware version '07' and earlier, RJ71GP21-SX firmware version '47' and earlier, RJ71GP21S-SX firmware version '47' and earlier, and RJ71GN11-T2 firmware version '11' and earlier) allows a remote unauthenticated attacker to cause an error in a CPU unit and cause a denial-of-service (DoS) condition in execution of the program and its communication, or to cause a denial-of-service (DoS) condition in communication via the unit by receiving a specially crafted SLMP packet

A lack of rate limiting in pjActionAjaxSend in Appointment Scheduler 3.0 allows attackers to cause resource exhaustion.

Expr is an expression language and expression evaluation for Go. Prior to version 1.17.7, several builtin functions in Expr, including `flatten`, `min`, `max`, `mean`, and `median`, perform recursive traversal over user-provided data structures without enforcing a maximum recursion depth. If the evaluation environment contains deeply nested or cyclic data structures, these functions may recurse indefinitely until exceed the Go runtime stack limit. This results in a stack overflow panic, causing the host application to crash. While exploitability depends on whether an attacker can influence or inject cyclic or pathologically deep data into the evaluation environment, this behavior represents a denial-of-service (DoS) risk and affects overall library robustness. Instead of returning a recoverable evaluation error, the process may terminate unexpectedly. In affected versions, evaluation of expressions that invoke certain builtin functions on untrusted or insufficiently validated data structures can lead to a process-level crash due to stack exhaustion. This issue is most relevant in scenarios where Expr is used to evaluate expressions against externally supplied or dynamically constructed environments; cyclic references (directly or indirectly) can be introduced into arrays, maps, or structs; and there are no application-level safeguards preventing deeply nested input data. In typical use cases with controlled, acyclic data, the issue may not manifest. However, when present, the resulting panic can be used to reliably crash the application, constituting a denial of service. The issue has been fixed in the v1.17.7 versions of Expr. The patch introduces a maximum recursion depth limit for affected builtin functions. When this limit is exceeded, evaluation aborts gracefully and returns a descriptive error instead of panicking. Additionally, the maximum depth can be customized by users via `builtin.MaxDepth`, allowing applications with legitimate deep structures to raise the limit in a controlled manner. Users are strongly encouraged to upgrade to the patched release, which includes both the recursion guard and comprehensive test coverage to prevent regressions. For users who cannot immediately upgrade, some mitigations are recommended. Ensure that evaluation environments cannot contain cyclic references, validate or sanitize externally supplied data structures before passing them to Expr, and/or wrap expression evaluation with panic recovery to prevent a full process crash (as a last-resort defensive measure). These workarounds reduce risk but do not fully eliminate the issue without the patch.

The orjson.dumps function in orjson thru 3.11.4 does not limit recursion for deeply nested JSON documents.

An issue in ollama v.0.12.10 allows a remote attacker to cause a denial of service via the GGUF decoder

MongoDB Server's mongos component can become unresponsive to new connections due to incorrect handling of incomplete data. This affects MongoDB when configured with load balancer support. This issue affects MongoDB Server v6.0 prior to 6.0.23, MongoDB Server v7.0 prior to 7.0.20 and MongoDB Server v8.0 prior to 8.0.9 Required Configuration: This affects MongoDB sharded clusters when configured with load balancer support for mongos using HAProxy on specified ports.

Tornado is a Python web framework and asynchronous networking library. Versions 6.5.2 and below use an inefficient algorithm when parsing parameters for HTTP header values, potentially causing a DoS. The _parseparam function in httputil.py is used to parse specific HTTP header values, such as those in multipart/form-data and repeatedly calls string.count() within a nested loop while processing quoted semicolons. If an attacker sends a request with a large number of maliciously crafted parameters in a Content-Disposition header, the server's CPU usage increases quadratically (O(n²)) during parsing. Due to Tornado's single event loop architecture, a single malicious request can cause the entire server to become unresponsive for an extended period. This issue is fixed in version 6.5.3.

Yamux is a stream multiplexer over reliable, ordered connections such as TCP/IP. The Rust implementation of the Yamux stream multiplexer uses a vector for pending frames. This vector is not bounded in length. Every time the Yamux protocol requires sending of a new frame, this frame gets appended to this vector. This can be remotely triggered in a number of ways, for example by: 1. Opening a new libp2p Identify stream. This causes the node to send its Identify message. Of course, every other protocol that causes the sending of data also works. The larger the response, the more data is enqueued. 2. Sending a Yamux Ping frame. This causes a Pong frame to be enqueued. Under normal circumstances, this queue of pending frames would be drained once they’re sent out over the network. However, the attacker can use TCP’s receive window mechanism to prevent the victim from sending out any data: By not reading from the TCP connection, the receive window will never be increased, and the victim won’t be able to send out any new data (this is how TCP implements backpressure). Once this happens, Yamux’s queue of pending frames will start growing indefinitely. The queue will only be drained once the underlying TCP connection is closed. An attacker can cause a remote node to run out of memory, which will result in the corresponding process getting terminated by the operating system.

It was found that the fix addressing CVE-2025-55184 in React Server Components was incomplete and does not prevent a denial of service attack in a specific case. React Server Components versions 19.0.2, 19.1.3 and 19.2.2 are affected, allowing unsafe deserialization of payloads from HTTP requests to Server Function endpoints. This can cause an infinite loop that hangs the server process and may prevent future HTTP requests from being served.

Uncontrolled resource consumption vulnerability in Ethernet Port on MELSEC iQ-R, Q and L series CPU modules (R 00/01/02 CPU firmware versions '20' and earlier, R 04/08/16/32/120 (EN) CPU firmware versions '52' and earlier, R 08/16/32/120 SFCPU firmware versions '22' and earlier, R 08/16/32/120 PCPU all versions, R 08/16/32/120 PSFCPU all versions, R 16/32/64 MTCPU all versions, Q03 UDECPU, Q 04/06/10/13/20/26/50/100 UDEHCPU serial number '22081' and earlier , Q 03/04/06/13/26 UDVCPU serial number '22031' and earlier, Q 04/06/13/26 UDPVCPU serial number '22031' and earlier, Q 172/173 DCPU all versions, Q 172/173 DSCPU all versions, Q 170 MCPU all versions, Q 170 MSCPU all versions, L 02/06/26 CPU (-P) and L 26 CPU - (P) BT all versions) allows a remote unauthenticated attacker to stop the Ethernet communication functions of the products via a specially crafted packet, which may lead to a denial of service (DoS) condition .

Tornado is a Python web framework and asynchronous networking library. In versions 6.5.2 and below, a single maliciously crafted HTTP request can block the server's event loop for an extended period, caused by the HTTPHeaders.add method. The function accumulates values using string concatenation when the same header name is repeated, causing a Denial of Service (DoS). Due to Python string immutability, each concatenation copies the entire string, resulting in O(n²) time complexity. The severity can vary from high if max_header_size has been increased from its default, to low if it has its default value of 64KB. This issue is fixed in version 6.5.3.

An issue was discovered in GitLab CE/EE affecting all versions starting from 17.2 before 18.2.7, 18.3 before 18.3.3, and 18.4 before 18.4.1, that allows an attacker to cause uncontrolled CPU consumption, potentially leading to a Denial of Service (DoS) condition while using specific GraphQL queries.

Improper input validation in GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier allows remote attackers to cause a denial of service via unspecified vectors.

Improper input handling in a system endpoint may allow attackers to overload resources, causing a denial of service.

mIRC before 6.35 allows attackers to cause a denial of service (crash) via a long nickname.

vLLM is an inference and serving engine for large language models (LLMs). In versions from 0.6.4 to before 0.12.0, users can crash the vLLM engine serving multimodal models that use the Idefics3 vision model implementation by sending a specially crafted 1x1 pixel image. This causes a tensor dimension mismatch that results in an unhandled runtime error, leading to complete server termination. This issue has been patched in version 0.12.0.

A Denial of Service (DoS) vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software enables an unauthenticated attacker to render the service unavailable by sending a large number of specially crafted packets over a period of time. This issue affects both the GlobalProtect portal and the GlobalProtect gateway. This issue does not apply to Cloud NGFWs or Prisma Access software.

Uncontrolled resource consumption vulnerability in MELSEC iQ-R Series CPU Modules (R00/01/02CPU Firmware versions from '05' to '19' and R04/08/16/32/120(EN)CPU Firmware versions from '35' to '51') allows a remote attacker to cause an error in a CPU unit via a specially crafted HTTP packet, which may lead to a denial-of-service (DoS) condition in execution of the program and its communication.

Apache Traffic Server is vulnerable to HTTP/2 setting flood attacks. Earlier versions of Apache Traffic Server didn't limit the number of setting frames sent from the client using the HTTP/2 protocol. Users should upgrade to Apache Traffic Server 7.1.7, 8.0.4, or later versions.

IBM MQ Internet Pass-Thru 2.1 and 9.2 could allow a remote user to cause a denial of service by sending malformed MQ data requests which would consume all available resources. IBM X-Force ID: 188093.

An issue has been discovered in GitLab CE/EE affecting all versions before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. This could allow an authenticated attacker to cause a denial of service condition by exhausting server resources.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 13.12 to 18.2.8, 18.3 to 18.3.4, and 18.4 to 18.4.2 that could make the GitLab instance unresponsive or severely degraded by sending crafted GraphQL queries requesting large repository blobs.

Those using Jettison to parse untrusted XML or JSON data may be vulnerable to Denial of Service attacks (DOS). If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by Out of memory. This effect may support a denial of service attack.

When MELSOFT transmission port (UDP/IP) of Mitsubishi Electric MELSEC iQ-R series (all versions), MELSEC iQ-F series (all versions), MELSEC Q series (all versions), MELSEC L series (all versions), and MELSEC F series (all versions) receives massive amount of data via unspecified vectors, resource consumption occurs and the port does not process the data properly. As a result, it may fall into a denial-of-service (DoS) condition. The vendor states this vulnerability only affects Ethernet communication functions.

Denial of service condition in M-Files Server in versions before 25.1.14445.5 allows an unauthenticated user to consume computing resources in certain conditions.

A denial-of-service issue was addressed with improved validation. This issue is fixed in watchOS 26.3, tvOS 26.3, macOS Tahoe 26.3, visionOS 26.3, iOS 26.3 and iPadOS 26.3. An attacker in a privileged network position may be able to perform denial-of-service attack using crafted Bluetooth packets.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.5.1, a malicious server can crash the FreeRDP client by sending invalid huge allocation size. Version 3.5.1 contains a patch for the issue. No known workarounds are available.

An issue has been discovered affecting service availability via issue preview in GitLab CE/EE affecting all versions from 16.7 before 17.9.7, 17.10 before 17.10.5, and 17.11 before 17.11.1.

An issue in ollama v.0.12.10 allows a remote attacker to cause a denial of service via the fs/ggml/gguf.go, function readGGUFV1String reads a string length from untrusted GGUF metadata

Pimcore is an Open Source Data & Experience Management Platform. The Pimcore thumbnail generation can be used to flood the server with large files. By changing the file extension or scaling factor of the requested thumbnail, attackers can create files that are much larger in file size than the original. This vulnerability is fixed in 11.2.4.

Dell EMC Isilon OneFS versions 8.2.2 and earlier contain a denial of service vulnerability. SmartConnect had an error condition that may be triggered to loop, using CPU and potentially preventing other SmartConnect DNS responses.

A flaw in Node.js TLS error handling allows remote attackers to crash or exhaust resources of a TLS server when `pskCallback` or `ALPNCallback` are in use. Synchronous exceptions thrown during these callbacks bypass standard TLS error handling paths (tlsClientError and error), causing either immediate process termination or silent file descriptor leaks that eventually lead to denial of service. Because these callbacks process attacker-controlled input during the TLS handshake, a remote client can repeatedly trigger the issue. This vulnerability affects TLS servers using PSK or ALPN callbacks across Node.js versions where these callbacks throw without being safely wrapped.

CAPI (Cloud Controller) versions prior to 1.101.0 are vulnerable to a denial-of-service attack in which an unauthenticated malicious attacker can send specially-crafted YAML files to certain endpoints, causing the YAML parser to consume excessive CPU and RAM.

IBM Spectrum Protect Plus 10.1.0 through 10.1.7 could allow a remote user to inject arbitrary data iwhich could cause the serivce to crash due to excess resource consumption. IBM X-Force ID: 193659.

Plesk Obsidian versions 8.0.1 through 18.0.73 are vulnerable to a Denial of Service (DoS) condition. The vulnerability exists in the get_password.php endpoint, where a crafted request containing a malicious payload can cause the affected web interface to continuously reload, rendering the service unavailable to legitimate users. An attacker can exploit this issue remotely without authentication, resulting in a persistent availability impact on the affected Plesk Obsidian instance.

In version 3.25.0 of aimhubio/aim, the tracking server is vulnerable to a denial of service attack. The server overrides the maximum size for websocket messages, allowing very large images to be tracked. This causes the server to become unresponsive to other requests while processing the large image, leading to a denial of service condition.

A type validation flaw in the flow.dstack() component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input.

A GPU device-ID validation flaw in OneFlow v0.9.0 allows attackers to trigger a Denial of Dervice (DoS) by invoking flow.cuda.get_device_properties() with an invalid or negative device index.

SyncBreeze 10.0.28 contains a denial of service vulnerability in the login endpoint that allows remote attackers to crash the service. Attackers can send an oversized payload in the login request to overwhelm the application and potentially disrupt service availability.

The issue was addressed with improved memory handling. This issue is fixed in macOS Tahoe 26.3, iOS 18.7.5 and iPadOS 18.7.5, visionOS 26.3, iOS 26.3 and iPadOS 26.3, Safari 26.3. A remote attacker may be able to cause a denial-of-service.

There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

Remote prevention of access to cellular service with no user interaction (for example, crashing the cellular radio service with a malformed packet)

webtransport-go is an implementation of the WebTransport protocol. From 0.3.0 to 0.9.0, an attacker can cause excessive memory consumption in webtransport-go's session implementation by sending a WT_CLOSE_SESSION capsule containing an excessively large Application Error Message. The implementation does not enforce the draft-mandated limit of 1024 bytes on this field, allowing a peer to send an arbitrarily large message payload that is fully read and stored in memory. This allows an attacker to consume an arbitrary amount of memory. The attacker must transmit the full payload to achieve the memory consumption, but the lack of any upper bound makes large-scale attacks feasible given sufficient bandwidth. This vulnerability is fixed in 0.10.0.

A vulnerability was found in Brondahl EnumStringValues up to 4.0.0. It has been declared as problematic. This vulnerability affects the function GetStringValuesWithPreferences_Uncache of the file EnumStringValues/EnumExtensions.cs. The manipulation leads to resource consumption. Upgrading to version 4.0.1 is able to address this issue. The name of the patch is c0fc7806beb24883cc2f9543ebc50c0820297307. It is recommended to upgrade the affected component. VDB-216466 is the identifier assigned to this vulnerability.

Frigate 2.02 contains a denial of service vulnerability that allows attackers to crash the application by sending oversized input to the command line interface. Attackers can generate a payload of 8000 repeated characters and paste it into the application's command line field to trigger an application crash.

Aerohive HiveOS contains a denial of service vulnerability in the NetConfig UI that allows unauthenticated attackers to render the web interface unusable. Attackers can send a crafted HTTP request to the action.php5 script with specific parameters to trigger a 5-minute service disruption.

Adobe Experience Manager versions 6.5, and 6.4 have an uncontrolled resource consumption vulnerability. Successful exploitation could lead to denial-of-service.

An issue in Yonganda YAD-LOJ V3.0.561 allows a remote attacker to cause a denial of service via a crafted packet.