Groovy Code Injection & SpEL Injection which lead to Remote Code Execution. This issue affected Apache ShenYu 2.4.0 and 2.4.1.
Server-Side Request Forgery (SSRF), Improper Control of Generation of Code ('Code Injection') vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 18.12.16. Users are recommended to upgrade to version 18.12.16, which fixes the issue.
The CloudStack cluster service runs on unauthenticated port (default 9090) that can be misused to run arbitrary commands on targeted hypervisors and CloudStack management server hosts. Some of these commands were found to have command injection vulnerabilities that can result in arbitrary code execution via agents on the hosts that may run as a privileged user. An attacker that can reach the cluster service on the unauthenticated port (default 9090), can exploit this to perform remote code execution on CloudStack managed hosts and result in complete compromise of the confidentiality, integrity, and availability of CloudStack managed infrastructure. Users are recommended to restrict the network access to the cluster service port (default 9090) on a CloudStack management server host to only its peer CloudStack management server hosts. Users are recommended to upgrade to version 4.18.2.1, 4.19.0.2 or later, which addresses this issue.
The CloudStack integration API service allows running its unauthenticated API server (usually on port 8096 when configured and enabled via integration.api.port global setting) for internal portal integrations and for testing purposes. By default, the integration API service port is disabled and is considered disabled when integration.api.port is set to 0 or negative. Due to an improper initialisation logic, the integration API service would listen on a random port when its port value is set to 0 (default value). An attacker that can access the CloudStack management network could scan and find the randomised integration API service port and exploit it to perform unauthorised administrative actions and perform remote code execution on CloudStack managed hosts and result in complete compromise of the confidentiality, integrity, and availability of CloudStack managed infrastructure. Users are recommended to restrict the network access on the CloudStack management server hosts to only essential ports. Users are recommended to upgrade to version 4.18.2.1, 4.19.0.2 or later, which addresses this issue.
Improper Control of Generation of Code ('Code Injection') vulnerability in Apache InLong. This issue affects Apache InLong: from 1.10.0 through 1.12.0, which could lead to Remote Code Execution. Users are advised to upgrade to Apache InLong's 1.13.0 or cherry-pick [1] to solve it. [1] https://github.com/apache/inlong/pull/10251
The ExceptionDelegator component in Apache Struts before 2.2.3.1 interprets parameter values as OGNL expressions during certain exception handling for mismatched data types of properties, which allows remote attackers to execute arbitrary Java code via a crafted parameter.
Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Zeppelin. The attacker can inject sensitive configuration or malicious code when connecting MySQL database via JDBC driver. This issue affects Apache Zeppelin: before 0.11.1. Users are recommended to upgrade to version 0.11.1, which fixes the issue.
ONTAP Select Deploy administration utility versions 2.11.2 through 2.12.2 are susceptible to a code injection vulnerability which when successfully exploited could allow an unauthenticated remote attacker to enable and use a privileged user account.
The RocketMQ NameServer component still has a remote command execution vulnerability as the CVE-2023-33246 issue was not completely fixed in version 5.1.1. When NameServer address are leaked on the extranet and lack permission verification, an attacker can exploit this vulnerability by using the update configuration function on the NameServer component to execute commands as the system users that RocketMQ is running as. It is recommended for users to upgrade their NameServer version to 5.1.2 or above for RocketMQ 5.x or 4.9.7 or above for RocketMQ 4.x to prevent these attacks.
For RocketMQ versions 5.1.0 and below, under certain conditions, there is a risk of remote command execution. Several components of RocketMQ, including NameServer, Broker, and Controller, are leaked on the extranet and lack permission verification, an attacker can exploit this vulnerability by using the update configuration function to execute commands as the system users that RocketMQ is running as. Additionally, an attacker can achieve the same effect by forging the RocketMQ protocol content. To prevent these attacks, users are recommended to upgrade to version 5.1.1 or above for using RocketMQ 5.x or 4.9.6 or above for using RocketMQ 4.x .
Improper Control of Generation of Code ('Code Injection') vulnerability leading to a possible RCE in Apache OFBiz scrum plugin. This issue affects Apache OFBiz: before 24.09.02 only when the scrum plugin is used. Even unauthenticated attackers can exploit this vulnerability. Users are recommended to upgrade to version 24.09.02, which fixes the issue.
Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Software Foundation Apache Airflow Hive Provider.This issue affects Apache Airflow Hive Provider: before 6.0.0.
Spring Data Commons, versions prior to 1.13 to 1.13.10, 2.0 to 2.0.5, and older unsupported versions, contain a property binder vulnerability caused by improper neutralization of special elements. An unauthenticated remote malicious user (or attacker) can supply specially crafted request parameters against Spring Data REST backed HTTP resources or using Spring Data's projection-based request payload binding hat can lead to a remote code execution attack.
Remote Code Execution with untrusted URI of UDF vulnerability in Apache IoTDB. The attacker who has privilege to create UDF can register malicious function from untrusted URI. This issue affects Apache IoTDB: from 1.0.0 before 1.3.4. Users are recommended to upgrade to version 1.3.4, which fixes the issue.
Remote Code Execution vulnerability in Apache IoTDB.This issue affects Apache IoTDB: from 1.0.0 through 1.2.2. Users are recommended to upgrade to version 1.3.0, which fixes the issue.
Improper Control of Generation of Code ('Code Injection') vulnerability in Apache InLong.This issue affects Apache InLong: from 1.5.0 through 1.9.0, which could lead to Remote Code Execution. Users are advised to upgrade to Apache InLong's 1.10.0 or cherry-pick [1] to solve it. [1] https://github.com/apache/inlong/pull/9329
Exposure of Remote Code Execution in Apache Dolphinscheduler. This issue affects Apache DolphinScheduler: before 3.2.1. We recommend users to upgrade Apache DolphinScheduler to version 3.2.1, which fixes the issue.
Pre-auth RCE in Apache Ofbiz 18.12.09. It's due to XML-RPC no longer maintained still present. This issue affects Apache OFBiz: before 18.12.10. Users are recommended to upgrade to version 18.12.10
Server-Side Request Forgery (SSRF), Improper Control of Generation of Code ('Code Injection') vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 18.12.17. Users are recommended to upgrade to version 18.12.17, which fixes the issue.
Exposure of Remote Code Execution in Apache Dolphinscheduler. This issue affects Apache DolphinScheduler: before 3.2.2. We recommend users to upgrade Apache DolphinScheduler to version 3.2.2, which fixes the issue.
In 0.10.0 or older versions of Apache Pinot, Pinot query endpoint and realtime ingestion layer has a vulnerability in unprotected environments due to a groovy function support. In order to avoid this, we disabled the groovy function support by default from Pinot release 0.11.0. See https://docs.pinot.apache.org/basics/releases/0.11.0
http/impl/client/HttpClientBuilder.java in Apache HttpClient 4.3.x before 4.3.1 does not ensure that X509HostnameVerifier is not null, which allows attackers to have unspecified impact via vectors involving hostname verification.
In PHP from 8.1.* before 8.1.32, from 8.2.* before 8.2.28, from 8.3.* before 8.3.19, from 8.4.* before 8.4.5, when parsing HTTP redirect in the response to an HTTP request, there is currently limit on the location value size caused by limited size of the location buffer to 1024. However as per RFC9110, the limit is recommended to be 8000. This may lead to incorrect URL truncation and redirecting to a wrong location.
Apache Struts 2.0.0 through 2.3.15 allows remote attackers to execute arbitrary OGNL expressions via a parameter with a crafted (1) action:, (2) redirect:, or (3) redirectAction: prefix.
An Improper Input Validation vulnerability in DataImportHandler of Apache Solr allows an attacker to provide a Windows UNC path resulting in an SMB network call being made from the Solr host to another host on the network. If the attacker has wider access to the network, this may lead to SMB attacks, which may result in: * The exfiltration of sensitive data such as OS user hashes (NTLM/LM hashes), * In case of misconfigured systems, SMB Relay Attacks which can lead to user impersonation on SMB Shares or, in a worse-case scenario, Remote Code Execution This issue affects all Apache Solr versions prior to 8.11.1. This issue only affects Windows.
Apache kylin checks the legitimacy of the project before executing some commands with the project name passed in by the user. There is a mismatch between what is being checked and what is being used as the shell command argument in DiagnosisService. This may cause an illegal project name to pass the check and perform the following steps, resulting in a command injection vulnerability. This issue affects Apache Kylin 4.0.0.
In Apache APISIX Dashboard before 2.10.1, the Manager API uses two frameworks and introduces framework `droplet` on the basis of framework `gin`, all APIs and authentication middleware are developed based on framework `droplet`, but some API directly use the interface of framework `gin` thus bypassing the authentication.
A carefully crafted request body can cause a buffer overflow in the mod_lua multipart parser (r:parsebody() called from Lua scripts). The Apache httpd team is not aware of an exploit for the vulnerabilty though it might be possible to craft one. This issue affects Apache HTTP Server 2.4.51 and earlier.
libcurl would wrongly close the same eventfd file descriptor twice when taking down a connection channel after having completed a threaded name resolve.
An issue was discovered in net/tipc/crypto.c in the Linux kernel before 5.14.16. The Transparent Inter-Process Communication (TIPC) functionality allows remote attackers to exploit insufficient validation of user-supplied sizes for the MSG_CRYPTO message type.
The npm ci command in npm 7.x and 8.x through 8.1.3 proceeds with an installation even if dependency information in package-lock.json differs from package.json. This behavior is inconsistent with the documentation, and makes it easier for attackers to install malware that was supposed to have been blocked by an exact version match requirement in package-lock.json. NOTE: The npm team believes this is not a vulnerability. It would require someone to socially engineer package.json which has different dependencies than package-lock.json. That user would have to have file system or write access to change dependencies. The npm team states preventing malicious actors from socially engineering or gaining file system access is outside the scope of the npm CLI.
Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in the stats-over-http plugin of Apache Traffic Server allows an attacker to overwrite memory. This issue affects Apache Traffic Server 9.1.0.
Legion of the Bouncy Castle Legion of the Bouncy Castle Java Cryptography APIs 1.58 up to but not including 1.60 contains a CWE-470: Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in XMSS/XMSS^MT private key deserialization that can result in Deserializing an XMSS/XMSS^MT private key can result in the execution of unexpected code. This attack appear to be exploitable via A handcrafted private key can include references to unexpected classes which will be picked up from the class path for the executing application. This vulnerability appears to have been fixed in 1.60 and later.
An unauthenticated Apache Traffic Control Traffic Ops user can send a request with a specially-crafted username to the POST /login endpoint of any API version to inject unsanitized content into the LDAP filter.
NSS (Network Security Services) versions prior to 3.73 or 3.68.1 ESR are vulnerable to a heap overflow when handling DER-encoded DSA or RSA-PSS signatures. Applications using NSS for handling signatures encoded within CMS, S/MIME, PKCS \#7, or PKCS \#12 are likely to be impacted. Applications using NSS for certificate validation or other TLS, X.509, OCSP or CRL functionality may be impacted, depending on how they configure NSS. *Note: This vulnerability does NOT impact Mozilla Firefox.* However, email clients and PDF viewers that use NSS for signature verification, such as Thunderbird, LibreOffice, Evolution and Evince are believed to be impacted. This vulnerability affects NSS < 3.73 and NSS < 3.68.1.
In PHP versions 8.1.* before 8.1.31, 8.2.* before 8.2.26, 8.3.* before 8.3.14, uncontrolled long string inputs to ldap_escape() function on 32-bit systems can cause an integer overflow, resulting in an out-of-bounds write.
A deserialization vulnerability existed in dubbo hessian-lite 3.2.11 and its earlier versions, which could lead to malicious code execution. Most Dubbo users use Hessian2 as the default serialization/deserialization protocol, during Hessian catch unexpected exceptions, Hessian will log out some imformation for users, which may cause remote command execution. This issue affects Apache Dubbo Apache Dubbo 2.6.x versions prior to 2.6.12; Apache Dubbo 2.7.x versions prior to 2.7.15; Apache Dubbo 3.0.x versions prior to 3.0.5.
The Struts 1 plugin in Apache Struts 2.1.x and 2.3.x might allow remote code execution via a malicious field value passed in a raw message to the ActionMessage.
In versions 3.0.0-3.9.0, 2.0.0-2.9.0, and 1.0.1, the NGINX Controller Agent does not use absolute paths when calling system utilities.
Affected Products and Versions * Apache Druid * Affected Versions: 0.17.0 through 35.x (all versions prior to 36.0.0) * Prerequisites: * druid-basic-security extension enabled * LDAP authenticator configured * Underlying LDAP server permits anonymous bind Vulnerability Description An authentication bypass vulnerability exists in Apache Druid when using the druid-basic-security extension with LDAP authentication. If the underlying LDAP server is configured to allow anonymous binds, an attacker can bypass authentication by providing an existing username with an empty password. This allows unauthorized access to otherwise restricted Druid resources without valid credentials. The vulnerability stems from improper validation of LDAP authentication responses when anonymous binds are permitted, effectively treating anonymous bind success as valid user authentication. Impact A remote, unauthenticated attacker can: * Gain unauthorized access to the Apache Druid cluster * Access sensitive data stored in Druid datasources * Execute queries and potentially manipulate data * Access administrative interfaces if the bypassed account has elevated privileges * Completely compromise the confidentiality, integrity, and availability of the Druid deployment Mitigation Immediate Mitigation (No Druid Upgrade Required): * Disable anonymous bind on your LDAP server. This prevents the vulnerability from being exploitable and is the recommended immediate action. Resolution * Upgrade Apache Druid to version 36.0.0 or later, which includes fixes to properly reject anonymous LDAP bind attempts.
PHP 7.x through 7.1.5 allows remote attackers to cause a denial of service (buffer overflow and application crash) or possibly have unspecified other impact via a long string because of an Integer overflow in mysqli_real_escape_string.
Heron versions <= 0.20.4-incubating allows CRLF log injection because of the lack of escaping in the log statements. Please update to version 0.20.5-incubating which addresses this issue.
Authentication Bypass Issue If the path does not contain / and contain., authentication is not required. Expected Normal Request and Response Example curl -X POST -H "Content-Type: application/json" -d {\"username\":\"hack2\",\"password\":\"hack\",\"component\":\"CONTROLLER\",\"role\":\"ADMIN\",\"tables\":[],\"permissions\":[],\"usernameWithComponent\":\"hack_CONTROLLER\"} http://{server_ip}:9000/users Return: {"code":401,"error":"HTTP 401 Unauthorized"} Malicious Request and Response Example curl -X POST -H "Content-Type: application/json" -d '{\"username\":\"hack\",\"password\":\"hack\",\"component\":\"CONTROLLER\",\"role\":\"ADMIN\",\"tables\":[],\"permissions\":[],\"usernameWithComponent\":\"hack_CONTROLLER\"}' http://{serverip}:9000/users; http://{serverip}:9000/users; . Return: {"users":{}} A new user gets added bypassing authentication, enabling the user to control Pinot.
libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a use-after-free in xmlSchemaIDCFillNodeTables and xmlSchemaBubbleIDCNodeTables in xmlschemas.c. To exploit this, a crafted XML document must be validated against an XML schema with certain identity constraints, or a crafted XML schema must be used.
An attacker-controlled pointer free in Busybox's hush applet leads to denial of service and possible code execution when processing a crafted shell command, due to the shell mishandling the &&& string. This may be used for remote code execution under rare conditions of filtered command input.
In Eclipse Jetty Server, versions 9.2.x and older, 9.3.x (all non HTTP/1.x configurations), and 9.4.x (all HTTP/1.x configurations), when presented with two content-lengths headers, Jetty ignored the second. When presented with a content-length and a chunked encoding header, the content-length was ignored (as per RFC 2616). If an intermediary decided on the shorter length, but still passed on the longer body, then body content could be interpreted by Jetty as a pipelined request. If the intermediary was imposing authorization, the fake pipelined request would bypass that authorization.
In Eclipse Jetty, versions 9.2.x and older, 9.3.x (all configurations), and 9.4.x (non-default configuration with RFC2616 compliance enabled), transfer-encoding chunks are handled poorly. The chunk length parsing was vulnerable to an integer overflow. Thus a large chunk size could be interpreted as a smaller chunk size and content sent as chunk body could be interpreted as a pipelined request. If Jetty was deployed behind an intermediary that imposed some authorization and that intermediary allowed arbitrarily large chunks to be passed on unchanged, then this flaw could be used to bypass the authorization imposed by the intermediary as the fake pipelined request would not be interpreted by the intermediary as a request.
Improper Neutralization of Formula Elements in Export CSV feature of Apache Ranger in Apache Ranger Version < 2.6.0. Users are recommended to upgrade to version 2.6.0, which fixes this issue.
It was found that the fix for CVE-2021-41773 in Apache HTTP Server 2.4.50 was insufficient. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue only affects Apache 2.4.49 and Apache 2.4.50 and not earlier versions.
Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.1.0 before 8.0.0 Description: Default clustering instructions at https://openmeetings.apache.org/Clustering.html doesn't specify white/black lists for OpenJPA this leads to possible deserialisation of untrusted data. Users are recommended to upgrade to version 8.0.0 and update their startup scripts to include the relevant 'openjpa.serialization.class.blacklist' and 'openjpa.serialization.class.whitelist' configurations as shown in the documentation.