Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.InternetConnection function.

A vulnerability classified as critical was found in D-Link DIR-880L up to 104WWb01. Affected by this vulnerability is the function sub_16570 of the file /htdocs/ssdpcgi of the component Request Header Handler. The manipulation of the argument HTTP_ST/REMOTE_ADDR/REMOTE_PORT/SERVER_ID leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

China Mobile An Lianbao WF-1 v1.0.1 router web interface through /api/ZRMacClone/mac_addr_clone receives parameters by POST request, and the parameter macType has a command injection vulnerability. An attacker can use the vulnerability to execute remote commands.

A vulnerability was found in Tenda RX3 16.03.13.11_multi. It has been rated as critical. This issue affects some unknown processing of the file /goform/telnet. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to command injection. The variables exp_dir1, among others, take user input and pass it to the click_train function, which concatenates them into a command that is run on the server. This can lead to arbitrary command execution. As of time of publication, no known patches exist.

Retrieval-based-Voice-Conversion-WebUI is a voice changing framework based on VITS. Versions 2.2.231006 and prior are vulnerable to command injection. The variables exp_dir1, np7 and f0method8 take user input and pass it into the extract_f0_feature function, which concatenates them into a command that is run on the server. This can lead to arbitrary command execution. As of time of publication, no known patches exist.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the password parameter.

Tenda AC9 v15.03.05.14 was discovered to contain a command injection vulnerability via the Telnet function.

An issue D-Link DIR-816-A2 DIR-816A2_FWv1.10CNB05_R1B011D88210 allows a remote attacker to execute arbitrary code via system() function in the bin/goahead file

A vulnerability was found in D-Link DIR-619L 2.04B04. It has been classified as critical. This affects the function formSysCmd. The manipulation of the argument sysCmd leads to command injection. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

git-fastclone before 1.0.5 passes user modifiable strings directly to a shell command. An attacker can execute malicious commands by modifying the strings that are passed as arguments to "cd " and "git clone " commands in the library.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability in the runtime.ddnsStatus DynDNS function via the hostname parameter.

A vulnerability classified as critical has been found in D-Link DIR-890L and DIR-806A1 up to 100CNb11/108B03. Affected is the function sub_175C8 of the file /htdocs/soap.cgi. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-605L 2.13B01. It has been rated as critical. This issue affects the function sub_454F2C. The manipulation of the argument sysCmd leads to command injection. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

Blink routers BL-WR9000 V2.4.9 , BL-AC2100_AZ3 V1.0.4, BL-X10_AC8 v1.0.5 , BL-LTE300 v1.2.3, BL-F1200_AT1 v1.0.0, BL-X26_AC8 v1.2.8, BLAC450M_AE4 v4.0.0 and BL-X26_DA3 v1.2.7 were discovered to contain a command injection vulnerability via the bs_SetSSIDHide function.

Osprey Pump Controller version 1.01 contains an unauthenticated command injection vulnerability that could allow system access with www-data permissions.

Blink routers BL-WR9000 V2.4.9 , BL-AC2100_AZ3 V1.0.4, BL-X10_AC8 v1.0.5 , BL-LTE300 v1.2.3, BL-F1200_AT1 v1.0.0, BL-X26_AC8 v1.2.8, BLAC450M_AE4 v4.0.0 and BL-X26_DA3 v1.2.7 were discovered to contain multiple command injection vulnerabilities via the dns1 and dns2 parameters in the bs_SetDNSInfo function.

TOTOLINK A950RG V4.1.2cu.5204_B20210112 contains a command execution vulnerability in the setDeviceName interface of the /lib/cste_modules/global.so library, specifically in the processing of the deviceMac parameter.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been declared as critical. Affected by this vulnerability is the function cmd_wireless. The manipulation of the argument host leads to command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

pgAdmin <= 8.4 is affected by a Remote Code Execution (RCE) vulnerability through the validate binary path API. This vulnerability allows attackers to execute arbitrary code on the server hosting PGAdmin, posing a severe risk to the database management system's integrity and the security of the underlying data.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. Successful exploitation could allow attackers to gain higher privileges.

Distrobox before 1.7.0.1 allows attackers to execute arbitrary code via command injection into exported executables.

FitNesse all releases allows a remote authenticated attacker to execute arbitrary OS commands. Note: A contributor of FitNesse has claimed that this is not a vulnerability but a product specification and this is currently under further investigation.

There is a system command injection vulnerability in BiSheng-WNM FW 3.0.0.325. A Huawei printer has a system command injection vulnerability. Successful exploitation could lead to remote code execution.

A remote code execution (RCE) vulnerability exists in the parisneo/lollms-webui, specifically within the 'open_file' module, version 9.5. The vulnerability arises due to improper neutralization of special elements used in a command within the 'open_file' function. An attacker can exploit this vulnerability by crafting a malicious file path that, when processed by the 'open_file' function, executes arbitrary system commands or reads sensitive file content. This issue is present in the code where subprocess.Popen is used unsafely to open files based on user-supplied paths without adequate validation, leading to potential command injection.

Sublime Text 4 was discovered to contain a command injection vulnerability via the New Build System module. NOTE: multiple third parties report that this is intended behavior.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the wps_ap_ssid5g parameter

In Notion Web Clipper 1.0.3(7), a .nib file is susceptible to the Dirty NIB attack. NIB files can be manipulated to execute arbitrary commands. Additionally, even if a NIB file is modified within an application, Gatekeeper may still permit the execution of the application, enabling the execution of arbitrary commands within the application's context. NOTE: the vendor's perspective is that this is simply an instance of CVE-2022-48505, cannot properly be categorized as a product-level vulnerability, and cannot have a product-level fix because it is about incorrect caching of file signatures on macOS.

Zentao v18.0 to v18.10 was discovered to contain a remote code execution (RCE) vulnerability via the checkConnection method of /app/zentao/module/repo/model.php.

A command injection vulnerability exists in the gena.cgi module of D-Link DAP-1650 devices. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

A vulnerability, which was classified as critical, has been found in SourceCodester Web-based Pharmacy Product Management System 1.0. This issue affects some unknown processing of the file backup.php of the component Database Backup Handler. The manipulation of the argument txtdbname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

FOG is a cloning/imaging/rescue suite/inventory management system. Prior to 1.5.10.34, packages/web/lib/fog/reportmaker.class.php in FOG was affected by a command injection via the filename parameter to /fog/management/export.php. This vulnerability is fixed in 1.5.10.34.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

Ruijie Networks RG-EW1200 Wireless Routers EW_3.0(1)B11P204 was discovered to contain a command injetion vulnerability via the params.path parameter in the upgradeConfirm function.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

A command injection remote code execution vulnerability exists in HPE StoreOnce Software.

Nanoleaf Desktop App before v1.3.1 was discovered to contain a command injection vulnerability which is exploited via a crafted HTTP request.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210803 and later

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability has been reported to affect QNAP device running QVR. If exploited, this vulnerability could allow remote attackers to run arbitrary commands. We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.5 build 20210902 and later

Alarm instance management has command injection when there is a specific command configured. It is only for logged-in users. We recommend you upgrade to version 2.0.6 or higher

In vowifi service, there is a possible command injection due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed.

A vulnerability classified as critical was found in TOTOLINK A6000R 1.0.1-B20201211.2000. Affected by this vulnerability is the function apcli_cancel_wps of the file /usr/lib/lua/luci/controller/mtkwifi.lua. The manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

xterm before 375 allows code execution via font ops, e.g., because an OSC 50 response may have Ctrl-g and therefore lead to command execution within the vi line-editing mode of Zsh. NOTE: font ops are not allowed in the xterm default configurations of some Linux distributions.

An issue in BL-AC2100 V1.0.4 and before allows a remote attacker to execute arbitrary code via the enable parameter passed to /goform/set_hidessid_cfg is not handled properly.

An issue in BL-AC2100 <=V1.0.4 allows a remote attacker to execute arbitrary code via the time1 and time2 parameters in the set_LimitClient_cfg of the goahead webservice.