Jenkins Selection tasks Plugin 1.0 and earlier executes a user-specified program on the Jenkins controller, allowing attackers with Job/Configure permission to execute an arbitrary system command on the Jenkins controller as the OS user that the Jenkins process is running as.

OS Command Injection vulnerability in the db_optimize component of Device42 Asset Management Appliance allows an authenticated attacker to execute remote code on the device. This issue affects: Device42 CMDB version 18.01.00 and prior versions.

/graphStatus/displayServiceStatus.php in Centreon 19.10.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the RRDdatabase_path parameter.

FiberHome ONU GPON AN5506-04-F RP2617 is affected by an OS command injection vulnerability. This vulnerability allows the attacker, once logged in, to send commands to the operating system as the root user via the ping diagnostic tool, bypassing the IP address field, and concatenating OS commands with a semicolon.

Artica Web Proxy 4.30.000000 allows an authenticated remote attacker to inject commands via the service-cmds parameter in cyrus.php. These commands are executed with root privileges via service_cmds_peform.

TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

Apache Kylin 2.3.0, and releases up to 2.6.5 and 3.0.1 has some restful apis which will concatenate os command with the user input string, a user is likely to be able to execute any os command without any protection or validation.

IBM Aspera Orchestrator 4.0.1 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 260116.

A shell command injection in the HW Events SNMP community in XoruX LPAR2RRD and STOR2RRD before 7.30 allows authenticated remote attackers to execute arbitrary shell commands as the user running the service.

MitraStar GPT-2541GNAC-N1 (HGU) 100VNZ0b33 devices allow remote authenticated users to obtain root access by executing command "deviceinfo show file &&/bin/bash" because of incorrect sanitization of parameter "path".

The administrative interface of Cohesive Networks vns3:vpn appliances before version 4.11.1 is vulnerable to authenticated remote code execution leading to server compromise.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

NeDi 1.9C is vulnerable to Remote Command Execution. System-Snapshot.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a psw parameter. (This can also be exploited via CSRF.)

OCS Inventory NG 2.7 allows Remote Command Execution via shell metacharacters to require/commandLine/CommandLine.php because mib_file in plugins/main_sections/ms_config/ms_snmp_config.php is mishandled in get_mib_oid.

NeDi 1.9C is vulnerable to Remote Command Execution. pwsec.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a pw parameter. (This can also be exploited via CSRF.)

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability in the diagnostic tools page. This vulnerability is exploited via a crafted HTTP request.

rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.

In the "webupg" binary of D-Link DIR-825 G1, because of the lack of parameter verification, attackers can use "cmd" parameters to execute arbitrary system commands after obtaining authorization.

Loadbalancer.org Enterprise VA MAX through 8.3.8 has an OS Command Injection vulnerability that allows a remote authenticated attacker to execute arbitrary code.

The novish command-line interface, included in NoviFlow NoviWare before NW500.2.12 and deployed on NoviSwitch devices, is vulnerable to command injection in the "show status destination ipaddr" command. This could be used by a read-only user (monitoring group) or admin to execute commands on the operating system.

QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8 allows an authenticated remote attacker to execute code on the server via command injection in the servicestart parameter.

SABnzbd 2.3.9 and 3.0.0Alpha2 has a command injection vulnerability in the web configuration interface that permits an authenticated user to execute arbitrary Python commands on the underlying operating system.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action send_log_email with the key auth_acname (or auth_passwd), allowing an authenticated user to run arbitrary commands on the device.

The ATOS/Sips (aka Atos-Magento) community module 3.0.0 to 3.0.5 for Magento allows command injection.

Centreon before 19.04.15 allows remote attackers to execute arbitrary OS commands by placing shell metacharacters in RRDdatabase_status_path (via a main.get.php request) and then visiting the include/views/graphs/graphStatus/displayServiceStatus.php page.

Artica Pandora FMS 7.44 allows remote command execution via the events feature.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

TRENDnet TEW-827DRU devices through 2.06B04 contain multiple command injections in apply.cgi via the action pppoe_connect, ru_pppoe_connect, or dhcp_connect with the key wan_ifname (or wan0_dns), allowing an authenticated user to run arbitrary commands on the device.

In QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8, the local www-data user can execute sudo mysql without a password, which means that the www-data user can execute arbitrary OS commands via the mysql -e option.

An issue was discovered in Open-AudIT 3.2.2. There is OS Command injection in Discovery.

An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable.

IBM Security Guardium 11.1 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 174735.

Dell SmartFabric Storage Software v1.4 (and earlier) contains an OS Command Injection Vulnerability in the CLI use of the ‘more’ command. A local or remote authenticated attacker could potentially exploit this vulnerability, leading to the ability to gain root-level access.

VIVOTEK Network Cameras before XXXXX-VVTK-2.2002.xx.01x (and before XXXXX-VVTK-0XXXX_Beta2) allows an authenticated user to upload and execute a script (with resultant execution of OS commands). For example, this affects IT9388-HT devices.

An issue was discovered in Open-AudIT 3.3.1. There is shell metacharacter injection via attributes to an open-audit/configuration/ URI. An attacker can exploit this by adding an excluded IP address to the global discovery settings (internally called exclude_ip). This exclude_ip value is passed to the exec function in the discoveries_helper.php file (inside the all_ip_list function) without being filtered, which means that the attacker can provide a payload instead of a valid IP address.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWeb version 6.4.1 and 6.4.0, version 6.3.15 and below, version 6.2.6 and below allows attacker to execute unauthorized code or commands via crafted HTTP requests.

An issue in YeaLinkSIP-T19P-E2 v.53.84.0.15 allows a remote privileged attacker to execute arbitrary code via a crafted request the ping function of the diagnostic component.

A Remote Code Execution (RCE) vulnerability exists in Ruijie Networks Ruijie RG-EW Series Routers up to ReyeeOS 1.55.1915 / EW_3.0(1)B11P55 via the updateVersion function in /cgi-bin/luci/api/wireless.

DKIM key management page vulnerability on Micro Focus Secure Messaging Gateway (SMG). Affecting all SMG Appliance running releases prior to July 2020. The vulnerability could allow a logged in user with rights to generate DKIM key information to inject system commands into the call to the DKIM system command.

sendfax.php in iFAX AvantFAX before 3.3.6 and HylaFAX Enterprise Web Interface before 0.2.5 allows authenticated Command Injection.

Dell DM5500 contains a privilege escalation vulnerability in the appliance. A remote attacker with low privileges could potentially exploit this vulnerability to escape the restricted shell and gain root access to the appliance.

Dell EMC Data Protection Advisor 6.4, 6.5 and 18.1 contain an OS command injection vulnerability. A remote authenticated malicious user may exploit this vulnerability to execute arbitrary commands on the affected system.

Beeline Smart Box 2.0.38 routers allow "Advanced settings > Other > Diagnostics" OS command injection via the Ping ping_ipaddr parameter, the Nslookup nslookup_ipaddr parameter, or the Traceroute traceroute_ipaddr parameter.

Pepperl+Fuchs Comtrol IO-Link Master in Version 1.5.48 and below is prone to an authenticated blind OS Command Injection.

Certain TP-Link devices allow Command Injection. This affects NC200 2.1.9 build 200225, NC210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.

ZeroShell 3.9.5 has a command injection vulnerability in /cgi-bin/kerbynet IP parameter, which may allow an authenticated attacker to execute system commands.

There is a Potential Zip Slip Vulnerability and OS Command Injection Vulnerability on the management system of baserCMS. Users with permissions to upload files may upload crafted zip files which may execute arbitrary commands on the host operating system. This is a vulnerability that needs to be addressed when the management system is used by an unspecified number of users. If you are eligible, please update to the new version as soon as possible.