In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

In the Linux kernel, the following vulnerability has been resolved: media: pci: cx23885: Fix the error handling in cx23885_initdev() When the driver fails to call the dma_set_mask(), the driver will get the following splat: [ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50 This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask().

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix possible use-after-free in transport error_recovery work While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix stale file descriptors on failed usercopy A failing usercopy of the fence_rep object will lead to a stale entry in the file descriptor table as put_unused_fd() won't release it. This enables userland to refer to a dangling 'file' object through that still valid file descriptor, leading to all kinds of use-after-free exploitation scenarios. Fix this by deferring the call to fd_install() until after the usercopy has succeeded.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free when reverting termination table When having multiple dests with termination tables and second one or afterwards fails the driver reverts usage of term tables but doesn't reset the assignment in attr->dests[num_vport_dests].termtbl which case a use-after-free when releasing the rule. Fix by resetting the assignment of termtbl to null.

In the Linux kernel, the following vulnerability has been resolved: peci: cpu: Fix use-after-free in adev_release() When auxiliary_device_add() returns an error, auxiliary_device_uninit() is called, which causes refcount for device to be decremented and .release callback will be triggered. Because adev_release() re-calls auxiliary_device_uninit(), it will cause use-after-free: [ 1269.455172] WARNING: CPU: 0 PID: 14267 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15 [ 1269.464007] refcount_t: underflow; use-after-free.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_debug_files_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: net/ipv6: avoid possible UAF in ip6_route_mpath_notify() syzbot found another use-after-free in ip6_route_mpath_notify() [1] Commit f7225172f25a ("net/ipv6: prevent use after free in ip6_route_mpath_notify") was not able to fix the root cause. We need to defer the fib6_info_release() calls after ip6_route_mpath_notify(), in the cleanup phase. [1] BUG: KASAN: slab-use-after-free in rt6_fill_node+0x1460/0x1ac0 Read of size 4 at addr ffff88809a07fc64 by task syz-executor.2/23037 CPU: 0 PID: 23037 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-01035-gea7f3cfaa588 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x167/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x180 mm/kasan/report.c:601 rt6_fill_node+0x1460/0x1ac0 inet6_rt_notify+0x13b/0x290 net/ipv6/route.c:6184 ip6_route_mpath_notify net/ipv6/route.c:5198 [inline] ip6_route_multipath_add net/ipv6/route.c:5404 [inline] inet6_rtm_newroute+0x1d0f/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f73dd87dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f73de6550c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f73dd9ac050 RCX: 00007f73dd87dda9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000005 RBP: 00007f73dd8ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f73dd9ac050 R15: 00007ffdbdeb7858 </TASK> Allocated by task 23037: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:372 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:389 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3981 [inline] __kmalloc+0x22e/0x490 mm/slub.c:3994 kmalloc include/linux/slab.h:594 [inline] kzalloc include/linux/slab.h:711 [inline] fib6_info_alloc+0x2e/0xf0 net/ipv6/ip6_fib.c:155 ip6_route_info_create+0x445/0x12b0 net/ipv6/route.c:3758 ip6_route_multipath_add net/ipv6/route.c:5298 [inline] inet6_rtm_newroute+0x744/0x2300 net/ipv6/route.c:5517 rtnetlink_rcv_msg+0x885/0x1040 net/core/rtnetlink.c:6597 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 Freed by task 16: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x4e/0x60 mm/kasan/generic.c:640 poison_slab_object+0xa6/0xe0 m ---truncated---

There exists a use-after-free vulnerability in the Linux kernel through io_uring and the IORING_OP_SPLICE operation. If IORING_OP_SPLICE is missing the IO_WQ_WORK_FILES flag, which signals that the operation won't use current->nsproxy, so its reference counter is not increased. This assumption is not always true as calling io_splice on specific files will call the get_uts function which will use current->nsproxy leading to invalidly decreasing its reference counter later causing the use-after-free vulnerability. We recommend upgrading to version 5.10.160 or above

A use-after-free flaw was found in the Linux kernel’s pipes functionality in how a user performs manipulations with the pipe post_one_notification() after free_pipe_info() that is already called. This flaw allows a local user to crash or potentially escalate their privileges on the system.

A use-after-free flaw was found in the Linux kernel’s Atheros wireless adapter driver in the way a user forces the ath9k_htc_wait_for_target function to fail with some input messages. This flaw allows a local user to crash or potentially escalate their privileges on the system.

Linux Kernel could allow a local attacker to execute arbitrary code on the system, caused by a concurrency use-after-free flaw in the bad_flp_intr function. By executing a specially-crafted program, an attacker could exploit this vulnerability to execute arbitrary code or cause a denial of service condition on the system.

The root cause of this vulnerability is that the ioctl$DRM_IOCTL_MODE_DESTROY_DUMB can decrease refcount of *drm_vgem_gem_object *(created in *vgem_gem_dumb_create*) concurrently, and *vgem_gem_dumb_create *will access the freed drm_vgem_gem_object.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - Fix use after free in cc_cipher_exit() kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But ctx_p->user.key is still used in the next line, which will lead to a use after free. We can call kfree_sensitive() after dev_dbg() to avoid the uaf.

An issue was discovered in the Linux kernel before 4.14.16. There is a use-after-free in net/sctp/socket.c for a held lock after a peel off, aka CID-a0ff660058b8.

In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

In the Linux kernel, the following vulnerability has been resolved: misc/libmasm/module: Fix two use after free in ibmasm_init_one In ibmasm_init_one, it calls ibmasm_init_remote_input_dev(). Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are allocated by input_allocate_device(), and assigned to sp->remote.mouse_dev and sp->remote.keybd_dev respectively. In the err_free_devices error branch of ibmasm_init_one, mouse_dev and keybd_dev are freed by input_free_device(), and return error. Then the execution runs into error_send_message error branch of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev. My patch add a "error_init_remote" label to handle the error of ibmasm_init_remote_input_dev(), to avoid the uaf bugs.

In the Linux kernel, the following vulnerability has been resolved: regmap: set debugfs_name to NULL after it is freed There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed.

In the Linux kernel, the following vulnerability has been resolved: iio: mma8452: Fix trigger reference couting The mma8452 driver directly assigns a trigger to the struct iio_dev. The IIO core when done using this trigger will call `iio_trigger_put()` to drop the reference count by 1. Without the matching `iio_trigger_get()` in the driver the reference count can reach 0 too early, the trigger gets freed while still in use and a use-after-free occurs. Fix this by getting a reference to the trigger before assigning it to the IIO device.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Fix invalid error returning in mhi_queue mhi_queue returns an error when the doorbell is not accessible in the current state. This can happen when the device is in non M0 state, like M3, and needs to be waken-up prior ringing the DB. This case is managed earlier by triggering an asynchronous M3 exit via controller resume/suspend callbacks, that in turn will cause M0 transition and DB update. So, since it's not an error but just delaying of doorbell update, there is no reason to return an error. This also fixes a use after free error for skb case, indeed a caller queuing skb will try to free the skb if the queueing fails, but in that case queueing has been done.

In the Linux kernel, the following vulnerability has been resolved: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in gfs2_glock_shrink_scan The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put(). On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list. Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock.

In the Linux kernel, the following vulnerability has been resolved: arch_topology: Avoid use-after-free for scale_freq_data Currently topology_scale_freq_tick() (which gets called from scheduler_tick()) may end up using a pointer to "struct scale_freq_data", which was previously cleared by topology_clear_scale_freq_source(), as there is no protection in place here. The users of topology_clear_scale_freq_source() though needs a guarantee that the previously cleared scale_freq_data isn't used anymore, so they can free the related resources. Since topology_scale_freq_tick() is called from scheduler tick, we don't want to add locking in there. Use the RCU update mechanism instead (which is already used by the scheduler's utilization update path) to guarantee race free updates here. synchronize_rcu() makes sure that all RCU critical sections that started before it is called, will finish before it returns. And so the callers of topology_clear_scale_freq_source() don't need to worry about their callback getting called anymore.

In the Linux kernel, the following vulnerability has been resolved: atm: iphase: fix possible use-after-free in ia_module_exit() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: can: pch_can: pch_can_rx_normal: fix use after free After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: media: davinci: vpif: fix use-after-free on driver unbind The driver allocates and registers two platform device structures during probe, but the devices were never deregistered on driver unbind. This results in a use-after-free on driver unbind as the device structures were allocated using devres and would be freed by driver core when remove() returns. Fix this by adding the missing deregistration calls to the remove() callback and failing probe on registration errors. Note that the platform device structures must be freed using a proper release callback to avoid leaking associated resources like device names.

In the Linux kernel, the following vulnerability has been resolved: Revert "Revert "block, bfq: honor already-setup queue merges"" A crash [1] happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41428cf ("block, bfq: reset last_bfqq_created on group change"). So, there is no point in keeping commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") out. This commit restores it. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_restart: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix a use after free in siw_alloc_mr Our code analyzer reported a UAF. In siw_alloc_mr(), it calls siw_mr_add_mem(mr,..). In the implementation of siw_mr_add_mem(), mem is assigned to mr->mem and then mem is freed via kfree(mem) if xa_alloc_cyclic() failed. Here, mr->mem still point to a freed object. After, the execution continue up to the err_out branch of siw_alloc_mr, and the freed mr->mem is used in siw_mr_drop_mem(mr). My patch moves "mr->mem = mem" behind the if (xa_alloc_cyclic(..)<0) {} section, to avoid the uaf.

In the Linux kernel, the following vulnerability has been resolved: ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl Hulk Robot reported a KASAN report about use-after-free: ================================================================== BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160 Read of size 8 at addr ffff888035e37d98 by task ubiattach/1385 [...] Call Trace: klist_dec_and_del+0xa7/0x4a0 klist_put+0xc7/0x1a0 device_del+0x4d4/0xed0 cdev_device_del+0x1a/0x80 ubi_attach_mtd_dev+0x2951/0x34b0 [ubi] ctrl_cdev_ioctl+0x286/0x2f0 [ubi] Allocated by task 1414: device_add+0x60a/0x18b0 cdev_device_add+0x103/0x170 ubi_create_volume+0x1118/0x1a10 [ubi] ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi] Freed by task 1385: cdev_device_del+0x1a/0x80 ubi_remove_volume+0x438/0x6c0 [ubi] ubi_cdev_ioctl+0xbf4/0x1ba0 [ubi] [...] ================================================================== The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be concurrent. ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach. ubi_detach is bug-free because it uses reference counting to prevent concurrency. However, uif_init and uif_close in ubi_attach may race with ubi_cdev_ioctl. uif_init will race with ubi_cdev_ioctl as in the following stack. cpu1 cpu2 cpu3 _______________________|________________________|______________________ ctrl_cdev_ioctl ubi_attach_mtd_dev uif_init ubi_cdev_ioctl ubi_create_volume cdev_device_add ubi_add_volume // sysfs exist kill_volumes ubi_cdev_ioctl ubi_remove_volume cdev_device_del // first free ubi_free_volume cdev_del // double free cdev_device_del And uif_close will race with ubi_cdev_ioctl as in the following stack. cpu1 cpu2 cpu3 _______________________|________________________|______________________ ctrl_cdev_ioctl ubi_attach_mtd_dev uif_init ubi_cdev_ioctl ubi_create_volume cdev_device_add ubi_debugfs_init_dev //error goto out_uif; uif_close kill_volumes ubi_cdev_ioctl ubi_remove_volume cdev_device_del // first free ubi_free_volume // double free The cause of this problem is that commit 714fb87e8bc0 make device "available" before it becomes accessible via sysfs. Therefore, we roll back the modification. We will fix the race condition between ubi device creation and udev by removing ubi_get_device in vol_attribute_show and dev_attribute_show.This avoids accessing uninitialized ubi_devices[ubi_num]. ubi_get_device is used to prevent devices from being deleted during sysfs execution. However, now kernfs ensures that devices will not be deleted before all reference counting are released. The key process is shown in the following stack. device_del device_remove_attrs device_remove_groups sysfs_remove_groups sysfs_remove_group remove_files kernfs_remove_by_name kernfs_remove_by_name_ns __kernfs_remove kernfs_drain

In the Linux kernel, the following vulnerability has been resolved: net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..). If some error happens in emac_tx_fill_tpd(), the skb will be freed via dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd(). But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len). As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len, thus my patch assigns skb->len to 'len' before the possible free and use 'len' instead of skb->len later.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() In resp_mode_select() sanity check the block descriptor len to avoid UAF. BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 Read of size 1 at addr ffff888026670f50 by task scsicmd/15032 CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Call Trace: <TASK> dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257 kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306 resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509 schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483 scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537 scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166 __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52 do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113

In the Linux kernel, the following vulnerability has been resolved: net: usb: fix possible use-after-free in smsc75xx_bind The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: Fix conn use after free during resets If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session.

In the Linux kernel, the following vulnerability has been resolved: aio: fix use-after-free due to missing POLLFREE handling signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <ramjiyani@google.com> (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.

In the Linux kernel, the following vulnerability has been resolved: drm/prime: Fix use after free in mmap with drm_gem_ttm_mmap drm_gem_ttm_mmap() drops a reference to the gem object on success. If the gem object's refcount == 1 on entry to drm_gem_prime_mmap(), that drop will free the gem object, and the subsequent drm_gem_object_get() will be a UAF. Fix by grabbing a reference before calling the mmap helper. This issue was forseen when the reference dropping was adding in commit 9786b65bc61ac ("drm/ttm: fix mmap refcounting"): "For that to work properly the drm_gem_object_get() call in drm_gem_ttm_mmap() must be moved so it happens before calling obj->funcs->mmap(), otherwise the gem refcount would go down to zero."

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login().

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a user-after-free in add_pble_prm When irdma_hmc_sd_one fails, 'chunk' is freed while its still on the PBLE info list. Add the chunk entry to the PBLE info list only after successful setting of the SD in irdma_hmc_sd_one.

In the Linux kernel, the following vulnerability has been resolved: inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:234 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: qcom/emac: fix UAF in emac_remove adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.

In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop.

In the Linux kernel, the following vulnerability has been resolved: bpf: Track subprog poke descriptors correctly and fix use-after-free Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- */ u32 size_poke_tab; /* 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, a748c6975dea3 ("bpf: propagate poke des ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix use-after-free bug in hclgevf_send_mbx_msg Currently, the hns3_remove function firstly uninstall client instance, and then uninstall acceletion engine device. The netdevice is freed in client instance uninstall process, but acceletion engine device uninstall process still use it to trace runtime information. This causes a use after free problem. So fixes it by check the instance register state to avoid use after free.

In the Linux kernel, the following vulnerability has been resolved: KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU If allocating a new instance of an I/O bus fails when unregistering a device, wait to destroy the device until after all readers are guaranteed to see the new null bus. Destroying devices before the bus is nullified could lead to use-after-free since readers expect the devices on their reference of the bus to remain valid.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge/panel: Cleanup connector on bridge detach If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] r ---truncated---