In the Linux kernel, the following vulnerability has been resolved: arm64: Don't call NULL in do_compat_alignment_fixup() do_alignment_t32_to_handler() only fixes up alignment faults for specific instructions; it returns NULL otherwise (e.g. LDREX). When that's the case, signal to the caller that it needs to proceed with the regular alignment fault handling (i.e. SIGBUS). Without this patch, the kernel panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000006 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000800164aa000 [0000000000000000] pgd=0800081fdbd22003, p4d=0800081fdbd22003, pud=08000815d51c6003, pmd=0000000000000000 Internal error: Oops: 0000000086000006 [#1] SMP Modules linked in: cfg80211 rfkill xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat br_netfilter veth nvme_fa> libcrc32c crc32c_generic raid0 multipath linear dm_mod dax raid1 md_mod xhci_pci nvme xhci_hcd nvme_core t10_pi usbcore igb crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_ce crct10dif_common usb_common i2c_algo_bit i2c> CPU: 2 PID: 3932954 Comm: WPEWebProcess Not tainted 6.1.0-31-arm64 #1 Debian 6.1.128-1 Hardware name: GIGABYTE MP32-AR1-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : do_compat_alignment_fixup+0xd8/0x3dc sp : ffff80000f973dd0 x29: ffff80000f973dd0 x28: ffff081b42526180 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000001 x20: 00000000e8551f00 x19: ffff80000f973eb0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffaebc949bc488 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000400000 x4 : 0000fffffffffffe x3 : 0000000000000000 x2 : ffff80000f973eb0 x1 : 00000000e8551f00 x0 : 0000000000000001 Call trace: 0x0 do_alignment_fault+0x40/0x50 do_mem_abort+0x4c/0xa0 el0_da+0x48/0xf0 el0t_32_sync_handler+0x110/0x140 el0t_32_sync+0x190/0x194 Code: bad PC value ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu' Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided L1<->L2 context switch latency counters to L1 user-space via perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't assign ownership of the PMU to the module 'vpa_pmu'. Consequently the module 'vpa_pmu' can be unloaded while one of the perf-events are still active, which can lead to kernel oops and panic of the form below on a Pseries-LPAR: BUG: Kernel NULL pointer dereference on read at 0x00000058 <snip> NIP [c000000000506cb8] event_sched_out+0x40/0x258 LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0 Call Trace: [c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable) [c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0 [c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120 <snip> Kernel panic - not syncing: Aiee, killing interrupt handler! Fix this by adding the module ownership to 'vpa_pmu' so that the module 'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events are initialized.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/hmm: Don't dereference struct page pointers without notifier lock The pnfs that we obtain from hmm_range_fault() point to pages that we don't have a reference on, and the guarantee that they are still in the cpu page-tables is that the notifier lock must be held and the notifier seqno is still valid. So while building the sg table and marking the pages accesses / dirty we need to hold this lock with a validated seqno. However, the lock is reclaim tainted which makes sg_alloc_table_from_pages_segment() unusable, since it internally allocates memory. Instead build the sg-table manually. For the non-iommu case this might lead to fewer coalesces, but if that's a problem it can be fixed up later in the resource cursor code. For the iommu case, the whole sg-table may still be coalesced to a single contigous device va region. This avoids marking pages that we don't own dirty and accessed, and it also avoid dereferencing struct pages that we don't own. v2: - Use assert to check whether hmm pfns are valid (Matthew Auld) - Take into account that large pages may cross range boundaries (Matthew Auld) v3: - Don't unnecessarily check for a non-freed sg-table. (Matthew Auld) - Add a missing up_read() in an error path. (Matthew Auld) (cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317)

In the Linux kernel, the following vulnerability has been resolved: atm: Fix NULL pointer dereference When MPOA_cache_impos_rcvd() receives the msg, it can trigger Null Pointer Dereference Vulnerability if both entry and holding_time are NULL. Because there is only for the situation where entry is NULL and holding_time exists, it can be passed when both entry and holding_time are NULL. If these are NULL, the entry will be passd to eg_cache_put() as parameter and it is referenced by entry->use code in it. kasan log: [ 3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I [ 3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102 [ 3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470 [ 3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80 [ 3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006 [ 3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e [ 3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030 [ 3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88 [ 3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15 [ 3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068 [ 3.324185] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000 [ 3.325042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0 [ 3.326430] Call Trace: [ 3.326725] <TASK> [ 3.326927] ? die_addr+0x3c/0xa0 [ 3.327330] ? exc_general_protection+0x161/0x2a0 [ 3.327662] ? asm_exc_general_protection+0x26/0x30 [ 3.328214] ? vprintk_emit+0x15e/0x420 [ 3.328543] ? eg_cache_remove_entry+0xa5/0x470 [ 3.328910] ? eg_cache_remove_entry+0x9a/0x470 [ 3.329294] ? __pfx_eg_cache_remove_entry+0x10/0x10 [ 3.329664] ? console_unlock+0x107/0x1d0 [ 3.329946] ? __pfx_console_unlock+0x10/0x10 [ 3.330283] ? do_syscall_64+0xa6/0x1a0 [ 3.330584] ? entry_SYSCALL_64_after_hwframe+0x47/0x7f [ 3.331090] ? __pfx_prb_read_valid+0x10/0x10 [ 3.331395] ? down_trylock+0x52/0x80 [ 3.331703] ? vprintk_emit+0x15e/0x420 [ 3.331986] ? __pfx_vprintk_emit+0x10/0x10 [ 3.332279] ? down_trylock+0x52/0x80 [ 3.332527] ? _printk+0xbf/0x100 [ 3.332762] ? __pfx__printk+0x10/0x10 [ 3.333007] ? _raw_write_lock_irq+0x81/0xe0 [ 3.333284] ? __pfx__raw_write_lock_irq+0x10/0x10 [ 3.333614] msg_from_mpoad+0x1185/0x2750 [ 3.333893] ? __build_skb_around+0x27b/0x3a0 [ 3.334183] ? __pfx_msg_from_mpoad+0x10/0x10 [ 3.334501] ? __alloc_skb+0x1c0/0x310 [ 3.334809] ? __pfx___alloc_skb+0x10/0x10 [ 3.335283] ? _raw_spin_lock+0xe0/0xe0 [ 3.335632] ? finish_wait+0x8d/0x1e0 [ 3.335975] vcc_sendmsg+0x684/0xba0 [ 3.336250] ? __pfx_vcc_sendmsg+0x10/0x10 [ 3.336587] ? __pfx_autoremove_wake_function+0x10/0x10 [ 3.337056] ? fdget+0x176/0x3e0 [ 3.337348] __sys_sendto+0x4a2/0x510 [ 3.337663] ? __pfx___sys_sendto+0x10/0x10 [ 3.337969] ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400 [ 3.338364] ? sock_ioctl+0x1bb/0x5a0 [ 3.338653] ? __rseq_handle_notify_resume+0x825/0xd20 [ 3.339017] ? __pfx_sock_ioctl+0x10/0x10 [ 3.339316] ? __pfx___rseq_handle_notify_resume+0x10/0x10 [ 3.339727] ? selinux_file_ioctl+0xa4/0x260 [ 3.340166] __x64_sys_sendto+0xe0/0x1c0 [ 3.340526] ? syscall_exit_to_user_mode+0x123/0x140 [ 3.340898] do_syscall_64+0xa6/0x1a0 [ 3.341170] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 3.341533] RIP: 0033:0x44a380 [ 3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in alloc_preauth_hash() The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete.

In the Linux kernel, the following vulnerability has been resolved: net: fec: handle page_pool_dev_alloc_pages error The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet.

In the Linux kernel, the following vulnerability has been resolved: HID: appleir: Fix potential NULL dereference at raw event handle Syzkaller reports a NULL pointer dereference issue in input_event(). BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline] BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395 Read of size 8 at addr 0000000000000028 by task syz-executor199/2949 CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 kasan_report+0xd9/0x110 mm/kasan/report.c:602 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] is_event_supported drivers/input/input.c:67 [inline] input_event+0x42/0xa0 drivers/input/input.c:395 input_report_key include/linux/input.h:439 [inline] key_down drivers/hid/hid-appleir.c:159 [inline] appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232 __hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111 hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484 __usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734 dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993 __run_hrtimer kernel/time/hrtimer.c:1739 [inline] __hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803 hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820 handle_softirqs+0x206/0x8d0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 __mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185 add_timer+0x62/0x90 kernel/time/timer.c:1295 schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98 usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645 usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784 hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This happens due to the malformed report items sent by the emulated device which results in a report, that has no fields, being added to the report list. Due to this appleir_input_configured() is never called, hidinput_connect() fails which results in the HID_CLAIMED_INPUT flag is not being set. However, it does not make appleir_probe() fail and lets the event callback to be called without the associated input device. Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook early if the driver didn't claim any input_dev for some reason. Moreover, some other hid drivers accessing input_dev in their event callbacks do have similar checks, too. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix NULL pointer access Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them.

In the Linux kernel, the following vulnerability has been resolved: acct: perform last write from workqueue In [1] it was reported that the acct(2) system call can be used to trigger NULL deref in cases where it is set to write to a file that triggers an internal lookup. This can e.g., happen when pointing acc(2) to /sys/power/resume. At the point the where the write to this file happens the calling task has already exited and called exit_fs(). A lookup will thus trigger a NULL-deref when accessing current->fs. Reorganize the code so that the the final write happens from the workqueue but with the caller's credentials. This preserves the (strange) permission model and has almost no regression risk. This api should stop to exist though.

In the Linux kernel, the following vulnerability has been resolved: driver core: class: Fix wild pointer dereferences in API class_dev_iter_next() There are a potential wild pointer dereferences issue regarding APIs class_dev_iter_(init|next|exit)(), as explained by below typical usage: // All members of @iter are wild pointers. struct class_dev_iter iter; // class_dev_iter_init(@iter, @class, ...) checks parameter @class for // potential class_to_subsys() error, and it returns void type and does // not initialize its output parameter @iter, so caller can not detect // the error and continues to invoke class_dev_iter_next(@iter) even if // @iter still contains wild pointers. class_dev_iter_init(&iter, ...); // Dereference these wild pointers in @iter here once suffer the error. while (dev = class_dev_iter_next(&iter)) { ... }; // Also dereference these wild pointers here. class_dev_iter_exit(&iter); Actually, all callers of these APIs have such usage pattern in kernel tree. Fix by: - Initialize output parameter @iter by memset() in class_dev_iter_init() and give callers prompt by pr_crit() for the error. - Check if @iter is valid in class_dev_iter_next().

In the Linux kernel, the following vulnerability has been resolved: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs().

In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.

In the Linux kernel, the following vulnerability has been resolved: mm/migrate: fix shmem xarray update during migration A shmem folio can be either in page cache or in swap cache, but not at the same time. Namely, once it is in swap cache, folio->mapping should be NULL, and the folio is no longer in a shmem mapping. In __folio_migrate_mapping(), to determine the number of xarray entries to update, folio_test_swapbacked() is used, but that conflates shmem in page cache case and shmem in swap cache case. It leads to xarray multi-index entry corruption, since it turns a sibling entry to a normal entry during xas_store() (see [1] for a userspace reproduction). Fix it by only using folio_test_swapcache() to determine whether xarray is storing swap cache entries or not to choose the right number of xarray entries to update. [1] https://lore.kernel.org/linux-mm/Z8idPCkaJW1IChjT@casper.infradead.org/ Note: In __split_huge_page(), folio_test_anon() && folio_test_swapcache() is used to get swap_cache address space, but that ignores the shmem folio in swap cache case. It could lead to NULL pointer dereferencing when a in-swap-cache shmem folio is split at __xa_store(), since !folio_test_anon() is true and folio->mapping is NULL. But fortunately, its caller split_huge_page_to_list_to_order() bails out early with EBUSY when folio->mapping is NULL. So no need to take care of it here.

In the Linux kernel, the following vulnerability has been resolved: arcnet: Add NULL check in com20020pci_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: Fix crash on error in gpiochip_get_ngpios() The gpiochip_get_ngpios() uses chip_*() macros to print messages. However these macros rely on gpiodev to be initialised and set, which is not the case when called via bgpio_init(). In such a case the printing messages will crash on NULL pointer dereference. Replace chip_*() macros by the respective dev_*() ones to avoid such crash.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and only if the local API is emulated/virtualized by KVM, and explicitly reject said hypercalls if the local APIC is emulated in userspace, i.e. don't rely on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID. Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if Hyper-V enlightenments are exposed to the guest without an in-kernel local APIC: dump_stack+0xbe/0xfd __kasan_report.cold+0x34/0x84 kasan_report+0x3a/0x50 __apic_accept_irq+0x3a/0x5c0 kvm_hv_send_ipi.isra.0+0x34e/0x820 kvm_hv_hypercall+0x8d9/0x9d0 kvm_emulate_hypercall+0x506/0x7e0 __vmx_handle_exit+0x283/0xb60 vmx_handle_exit+0x1d/0xd0 vcpu_enter_guest+0x16b0/0x24c0 vcpu_run+0xc0/0x550 kvm_arch_vcpu_ioctl_run+0x170/0x6d0 kvm_vcpu_ioctl+0x413/0xb20 __se_sys_ioctl+0x111/0x160 do_syscal1_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode can't be modified after vCPUs are created, i.e. if one vCPU has an in-kernel local APIC, then all vCPUs have an in-kernel local APIC.

In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix NULL pointer dereference on mkdir When a 9p tree was mounted with option 'posixacl', parent directory had a default ACL set for its subdirectories, e.g.: setfacl -m default:group:simpsons:rwx parentdir then creating a subdirectory crashed 9p client, as v9fs_fid_add() call in function v9fs_vfs_mkdir_dotl() sets the passed 'fid' pointer to NULL (since dafbe689736) even though the subsequent v9fs_set_create_acl() call expects a valid non-NULL 'fid' pointer: [ 37.273191] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 37.322338] Call Trace: [ 37.323043] <TASK> [ 37.323621] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 37.324448] ? page_fault_oops (arch/x86/mm/fault.c:714) [ 37.325532] ? search_module_extables (kernel/module/main.c:3733) [ 37.326742] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.328006] ? search_bpf_extables (kernel/bpf/core.c:804) [ 37.329142] ? exc_page_fault (./arch/x86/include/asm/paravirt.h:686 arch/x86/mm/fault.c:1488 arch/x86/mm/fault.c:1538) [ 37.330196] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:574) [ 37.331330] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.332562] ? v9fs_fid_xattr_get (fs/9p/xattr.c:30) 9p [ 37.333824] v9fs_fid_xattr_set (fs/9p/fid.h:23 fs/9p/xattr.c:121) 9p [ 37.335077] v9fs_set_acl (fs/9p/acl.c:276) 9p [ 37.336112] v9fs_set_create_acl (fs/9p/acl.c:307) 9p [ 37.337326] v9fs_vfs_mkdir_dotl (fs/9p/vfs_inode_dotl.c:411) 9p [ 37.338590] vfs_mkdir (fs/namei.c:4313) [ 37.339535] do_mkdirat (fs/namei.c:4336) [ 37.340465] __x64_sys_mkdir (fs/namei.c:4354) [ 37.341455] do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) [ 37.342447] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by simply swapping the sequence of these two calls in v9fs_vfs_mkdir_dotl(), i.e. calling v9fs_set_create_acl() before v9fs_fid_add().

In the Linux kernel, the following vulnerability has been resolved: can: etas_es58x: fix potential NULL pointer dereference on udev->serial The driver assumed that es58x_dev->udev->serial could never be NULL. While this is true on commercially available devices, an attacker could spoof the device identity providing a NULL USB serial number. That would trigger a NULL pointer dereference. Add a check on es58x_dev->udev->serial before accessing it.

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add sanity checks on rdev validity There is a possibility that ulp_irq_stop and ulp_irq_start callbacks will be called when the device is in detached state. This can cause a crash due to NULL pointer dereference as the rdev is already freed.

A NULL pointer dereference flaw was found in the Linux kernel's drivers/gpu/drm/msm/msm_gem_submit.c code in the submit_lookup_cmds function, which fails because it lacks a check of the return value of kmalloc(). This issue allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in ni_usb If the usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: mptcp: sysctl: blackhole timeout: avoid using current->nsproxy As mentioned in the previous commit, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'pernet' structure can be obtained from the table->data using container_of().

In the Linux kernel, the following vulnerability has been resolved: media: imx-pxp: Fix ERR_PTR dereference in pxp_probe() devm_regmap_init_mmio() can fail, add a check and bail out in case of error.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flags PRT BOs may not have any backing store, so bo->tbo.resource will be NULL. Check for that before dereferencing. (cherry picked from commit 3e3fcd29b505cebed659311337ea03b7698767fc)

In the Linux kernel, the following vulnerability has been resolved: w1: fix NULL pointer dereference in probe The w1_uart_probe() function calls w1_uart_serdev_open() (which includes devm_serdev_device_open()) before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via w1_uart_serdev_open().

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: During vport delete send async logout explicitly During vport delete, it is observed that during unload we hit a crash because of stale entries in outstanding command array. For all these stale I/O entries, eh_abort was issued and aborted (fast_fail_io = 2009h) but I/Os could not complete while vport delete is in process of deleting. BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI Workqueue: qla2xxx_wq qla_do_work [qla2xxx] RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffa1e1e150fc68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000001 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8ce208a7a0d0 RBP: ffff8ce208a7a0d0 R08: 0000000000000000 R09: ffff8ce378aac9c8 R10: ffff8ce378aac8a0 R11: ffffa1e1e150f9d8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8ce378aac9c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8d217f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000002089acc000 CR4: 0000000000350ee0 Call Trace: <TASK> qla2xxx_qpair_sp_free_dma+0x417/0x4e0 ? qla2xxx_qpair_sp_compl+0x10d/0x1a0 ? qla2x00_status_entry+0x768/0x2830 ? newidle_balance+0x2f0/0x430 ? dequeue_entity+0x100/0x3c0 ? qla24xx_process_response_queue+0x6a1/0x19e0 ? __schedule+0x2d5/0x1140 ? qla_do_work+0x47/0x60 ? process_one_work+0x267/0x440 ? process_one_work+0x440/0x440 ? worker_thread+0x2d/0x3d0 ? process_one_work+0x440/0x440 ? kthread+0x156/0x180 ? set_kthread_struct+0x50/0x50 ? ret_from_fork+0x22/0x30 </TASK> Send out async logout explicitly for all the ports during vport delete.

In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Check if is_avq is NULL [bug] In the virtio_pci_common.c function vp_del_vqs, vp_dev->is_avq is involved to determine whether it is admin virtqueue, but this function vp_dev->is_avq may be empty. For installations, virtio_pci_legacy does not assign a value to vp_dev->is_avq. [fix] Check whether it is vp_dev->is_avq before use. [test] Test with virsh Attach device Before this patch, the following command would crash the guest system After applying the patch, everything seems to be working fine.

In the Linux kernel, the following vulnerability has been resolved: net: Add rx_skb of kfree_skb to raw_tp_null_args[]. Yan Zhai reported a BPF prog could trigger a null-ptr-deref [0] in trace_kfree_skb if the prog does not check if rx_sk is NULL. Commit c53795d48ee8 ("net: add rx_sk to trace_kfree_skb") added rx_sk to trace_kfree_skb, but rx_sk is optional and could be NULL. Let's add kfree_skb to raw_tp_null_args[] to let the BPF verifier validate such a prog and prevent the issue. Now we fail to load such a prog: libbpf: prog 'drop': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; int BPF_PROG(drop, struct sk_buff *skb, void *location, @ kfree_skb_sk_null.bpf.c:21 0: (79) r3 = *(u64 *)(r1 +24) func 'kfree_skb' arg3 has btf_id 5253 type STRUCT 'sock' 1: R1=ctx() R3_w=trusted_ptr_or_null_sock(id=1) ; bpf_printk("sk: %d, %d\n", sk, sk->__sk_common.skc_family); @ kfree_skb_sk_null.bpf.c:24 1: (69) r4 = *(u16 *)(r3 +16) R3 invalid mem access 'trusted_ptr_or_null_' processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 -- END PROG LOAD LOG -- Note this fix requires commit 838a10bd2ebf ("bpf: Augment raw_tp arguments with PTR_MAYBE_NULL"). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000010 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 PREEMPT SMP RIP: 0010:bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x148/0x420 ? search_bpf_extables+0x5b/0x70 ? fixup_exception+0x27/0x2c0 ? exc_page_fault+0x75/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d bpf_trace_run4+0x68/0xd0 ? unix_stream_connect+0x1f4/0x6f0 sk_skb_reason_drop+0x90/0x120 unix_stream_connect+0x1f4/0x6f0 __sys_connect+0x7f/0xb0 __x64_sys_connect+0x14/0x20 do_syscall_64+0x47/0xc30 entry_SYSCALL_64_after_hwframe+0x4b/0x53

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix adapter NULL pointer dereference on reboot With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE There is a WARN_ON_ONCE to catch an unlikely situation when domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless happens we must avoid using a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: Don't unset window if it was never set On pSeries, when user attempts to use the same vfio container used by different iommu group, the spapr_tce_set_window() returns -EPERM and the subsequent cleanup leads to the below crash. Kernel attempted to read user page (308) - exploit attempt? BUG: Kernel NULL pointer dereference on read at 0x00000308 Faulting instruction address: 0xc0000000001ce358 Oops: Kernel access of bad area, sig: 11 [#1] NIP: c0000000001ce358 LR: c0000000001ce05c CTR: c00000000005add0 <snip> NIP [c0000000001ce358] spapr_tce_unset_window+0x3b8/0x510 LR [c0000000001ce05c] spapr_tce_unset_window+0xbc/0x510 Call Trace: spapr_tce_unset_window+0xbc/0x510 (unreliable) tce_iommu_attach_group+0x24c/0x340 [vfio_iommu_spapr_tce] vfio_container_attach_group+0xec/0x240 [vfio] vfio_group_fops_unl_ioctl+0x548/0xb00 [vfio] sys_ioctl+0x754/0x1580 system_call_exception+0x13c/0x330 system_call_vectored_common+0x15c/0x2ec <snip> --- interrupt: 3000 Fix this by having null check for the tbl passed to the spapr_tce_unset_window().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)

In the Linux kernel, the following vulnerability has been resolved: net: mana: cleanup mana struct after debugfs_remove() When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 19 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Flush the notify_hotplug_work When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower]

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: Fix NAPI registration sequence Registering the interrupts for TX or RX DMA Channels prior to registering their respective NAPI callbacks can result in a NULL pointer dereference. This is seen in practice as a random occurrence since it depends on the randomness associated with the generation of traffic by Linux and the reception of traffic from the wire.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Bridge, fix the crash caused by LAG state check When removing LAG device from bridge, NETDEV_CHANGEUPPER event is triggered. Driver finds the lower devices (PFs) to flush all the offloaded entries. And mlx5_lag_is_shared_fdb is checked, it returns false if one of PF is unloaded. In such case, mlx5_esw_bridge_lag_rep_get() and its caller return NULL, instead of the alive PF, and the flush is skipped. Besides, the bridge fdb entry's lastuse is updated in mlx5 bridge event handler. But this SWITCHDEV_FDB_ADD_TO_BRIDGE event can be ignored in this case because the upper interface for bond is deleted, and the entry will never be aged because lastuse is never updated. To make things worse, as the entry is alive, mlx5 bridge workqueue keeps sending that event, which is then handled by kernel bridge notifier. It causes the following crash when accessing the passed bond netdev which is already destroyed. To fix this issue, remove such checks. LAG state is already checked in commit 15f8f168952f ("net/mlx5: Bridge, verify LAG state when adding bond to bridge"), driver still need to skip offload if LAG becomes invalid state after initialization. Oops: stack segment: 0000 [#1] SMP CPU: 3 UID: 0 PID: 23695 Comm: kworker/u40:3 Tainted: G OE 6.11.0_mlnx #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_bridge_wq mlx5_esw_bridge_update_work [mlx5_core] RIP: 0010:br_switchdev_event+0x2c/0x110 [bridge] Code: 44 00 00 48 8b 02 48 f7 00 00 02 00 00 74 69 41 54 55 53 48 83 ec 08 48 8b a8 08 01 00 00 48 85 ed 74 4a 48 83 fe 02 48 89 d3 <4c> 8b 65 00 74 23 76 49 48 83 fe 05 74 7e 48 83 fe 06 75 2f 0f b7 RSP: 0018:ffffc900092cfda0 EFLAGS: 00010297 RAX: ffff888123bfe000 RBX: ffffc900092cfe08 RCX: 00000000ffffffff RDX: ffffc900092cfe08 RSI: 0000000000000001 RDI: ffffffffa0c585f0 RBP: 6669746f6e690a30 R08: 0000000000000000 R09: ffff888123ae92c8 R10: 0000000000000000 R11: fefefefefefefeff R12: ffff888123ae9c60 R13: 0000000000000001 R14: ffffc900092cfe08 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f15914c8734 CR3: 0000000002830005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? die+0x38/0x60 ? do_trap+0x10b/0x120 ? do_error_trap+0x64/0xa0 ? exc_stack_segment+0x33/0x50 ? asm_exc_stack_segment+0x22/0x30 ? br_switchdev_event+0x2c/0x110 [bridge] ? sched_balance_newidle.isra.149+0x248/0x390 notifier_call_chain+0x4b/0xa0 atomic_notifier_call_chain+0x16/0x20 mlx5_esw_bridge_update+0xec/0x170 [mlx5_core] mlx5_esw_bridge_update_work+0x19/0x40 [mlx5_core] process_scheduled_works+0x81/0x390 worker_thread+0x106/0x250 ? bh_worker+0x110/0x110 kthread+0xb7/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: dpll: fix xa_alloc_cyclic() error handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (pin). Fix it by checking if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode(). Add a check to avoid null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated.

In the Linux kernel, the following vulnerability has been resolved: netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets When calling netlbl_conn_setattr(), addr->sa_family is used to determine the function behavior. If sk is an IPv4 socket, but the connect function is called with an IPv6 address, the function calipso_sock_setattr() is triggered. Inside this function, the following code is executed: sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL; Since sk is an IPv4 socket, pinet6 is NULL, leading to a null pointer dereference. This patch fixes the issue by checking if inet6_sk(sk) returns a NULL pointer before accessing pinet6.

In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name() Add check for the return value of mgmt_alloc_skb() in mgmt_remote_name() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl() If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel crash. To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and trigger an scx error if an invalid CPU is specified.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw devm_kasprintf() calls can return null pointers on failure. But the return values were not checked in npcm8xx_gpio_fw(). Add NULL check in npcm8xx_gpio_fw(), to handle kernel NULL pointer dereference error.