In the Linux kernel, the following vulnerability has been resolved: net: phy: fix null-ptr-deref while probe() failed I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493860 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: qede: confirm skb is allocated before using qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493866 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault() This was missed because of the function pointer indirection. nvidia_smmu_context_fault() is also installed as a irq function, and the 'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain is embedded at a non-zero offset this causes nvidia_smmu_context_fault() to miscompute the offset. Fixup the types. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000 [0000000000000120] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1 Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023 Workqueue: events_unbound deferred_probe_work_func pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : nvidia_smmu_context_fault+0x1c/0x158 lr : __free_irq+0x1d4/0x2e8 sp : ffff80008044b6f0 x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970 x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30 x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000 x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888 x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0 x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000 x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057 Call trace: nvidia_smmu_context_fault+0x1c/0x158 __free_irq+0x1d4/0x2e8 free_irq+0x3c/0x80 devm_free_irq+0x64/0xa8 arm_smmu_domain_free+0xc4/0x158 iommu_domain_free+0x44/0xa0 iommu_deinit_device+0xd0/0xf8 __iommu_group_remove_device+0xcc/0xe0 iommu_bus_notifier+0x64/0xa8 notifier_call_chain+0x78/0x148 blocking_notifier_call_chain+0x4c/0x90 bus_notify+0x44/0x70 device_del+0x264/0x3e8 pci_remove_bus_device+0x84/0x120 pci_remove_root_bus+0x5c/0xc0 dw_pcie_host_deinit+0x38/0xe0 tegra_pcie_config_rp+0xc0/0x1f0 tegra_pcie_dw_probe+0x34c/0x700 platform_probe+0x70/0xe8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x160 driver_probe_device+0x44/0x130 __device_attach_driver+0xc4/0x170 bus_for_each_drv+0x90/0x100 __device_attach+0xa8/0x1c8 device_initial_probe+0x1c/0x30 bus_probe_device+0xb0/0xc0 deferred_probe_work_func+0xbc/0x120 process_one_work+0x194/0x490 worker_thread+0x284/0x3b0 kthread+0xf4/0x108 ret_from_fork+0x10/0x20 Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1)

In the Linux kernel, the following vulnerability has been resolved: net: core: reject skb_copy(_expand) for fraglist GSO skbs SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become invalid. Return NULL if such an skb is passed to skb_copy or skb_copy_expand, in order to prevent a crash on a potential later call to skb_gso_segment.

In the Linux kernel before 5.16.3, drivers/usb/dwc3/dwc3-qcom.c misinterprets the dwc3_qcom_create_urs_usb_platdev return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix AIP early init panic An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path.

In the Linux kernel, the following vulnerability has been resolved: swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following crash when initialising the restricted pools at boot-time: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 | Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP | pc : rmem_swiotlb_device_init+0xfc/0x1ec | lr : rmem_swiotlb_device_init+0xf0/0x1ec | Call trace: | rmem_swiotlb_device_init+0xfc/0x1ec | of_reserved_mem_device_init_by_idx+0x18c/0x238 | of_dma_configure_id+0x31c/0x33c | platform_dma_configure+0x34/0x80 faddr2line reveals that the crash is in the list validation code: include/linux/list.h:83 include/linux/rculist.h:79 include/linux/rculist.h:106 kernel/dma/swiotlb.c:306 kernel/dma/swiotlb.c:1695 because add_mem_pool() is trying to list_add_rcu() to a NULL 'mem->pools'. Fix the crash by initialising the 'mem->pools' list_head in rmem_swiotlb_device_init() before calling add_mem_pool().

In the Linux kernel before 5.15.13, drivers/net/ethernet/mellanox/mlx5/core/steering/dr_domain.c misinterprets the mlx5_get_uars_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: fpga: manager: add owner module and take its refcount The current implementation of the fpga manager assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the manager if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_manager struct and use it to take the module's refcount. Modify the functions for registering the manager to take an additional owner module parameter and rename them to avoid conflicts. Use the old function names for helper macros that automatically set the module that registers the manager as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a manager without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga manager. Other changes: opportunistically move put_device() from __fpga_mgr_get() to fpga_mgr_get() and of_fpga_mgr_get() to improve code clarity since the manager device is taken in these functions.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: don't free NULL coalescing rule If the parsing fails, we can dereference a NULL pointer here.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes.

In the Linux kernel before 6.1.2, kernel/module/decompress.c misinterprets the module_get_next_page return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel before 5.16.3, drivers/bluetooth/hci_qca.c misinterprets the devm_gpiod_get_index_optional return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

A null pointer dereference vulnerability was found in nft_dynset_init() in net/netfilter/nft_dynset.c in nf_tables in the Linux kernel. This issue may allow a local attacker with CAP_NET_ADMIN user privilege to trigger a denial of service.

In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix mas_empty_area_rev() null pointer dereference Currently the code calls mas_start() followed by mas_data_end() if the maple state is MA_START, but mas_start() may return with the maple state node == NULL. This will lead to a null pointer dereference when checking information in the NULL node, which is done in mas_data_end(). Avoid setting the offset if there is no node by waiting until after the maple state is checked for an empty or single entry state. A user could trigger the events to cause a kernel oops by unmapping all vmas to produce an empty maple tree, then mapping a vma that would cause the scenario described above.

In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: Fix potential null pointer dereference In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may return NULL as ptp_header due to abnormal packet type or corrupted packet. Fix this bug by adding ptp_header check. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Use mlx5_ipsec_rx_status_destroy to correctly delete status rules rx_create no longer allocates a modify_hdr instance that needs to be cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer dereference. A leak in the rules also previously occurred since there are now two rules populated related to status. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 109907067 P4D 109907067 PUD 116890067 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70 <snip> Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x24/0x70 ? page_fault_oops+0x15f/0x430 ? free_to_partial_list.constprop.0+0x79/0x150 ? do_user_addr_fault+0x2c9/0x5c0 ? exc_page_fault+0x63/0x110 ? asm_exc_page_fault+0x27/0x30 ? mlx5_modify_header_dealloc+0xd/0x70 rx_create+0x374/0x590 rx_add_rule+0x3ad/0x500 ? rx_add_rule+0x3ad/0x500 ? mlx5_cmd_exec+0x2c/0x40 ? mlx5_create_ipsec_obj+0xd6/0x200 mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0 mlx5e_xfrm_add_state+0x426/0xc00 <snip>

In the Linux kernel before 6.2, mm/memory-tiers.c misinterprets the alloc_memory_type return value (expects it to be NULL in the error case, whereas it is actually an error pointer). NOTE: this is disputed by third parties because there are no realistic cases in which a user can cause the alloc_memory_type error case to be reached.

In the Linux kernel before 5.16.3, drivers/scsi/ufs/ufs-mediatek.c misinterprets the regulator_get return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix NULL pointer in can_accept_new_subflow When testing valkey benchmark tool with MPTCP, the kernel panics in 'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL. Call trace: mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P) subflow_syn_recv_sock (./net/mptcp/subflow.c:854) tcp_check_req (./net/ipv4/tcp_minisocks.c:863) tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268) ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207) ip_local_deliver_finish (./net/ipv4/ip_input.c:234) ip_local_deliver (./net/ipv4/ip_input.c:254) ip_rcv_finish (./net/ipv4/ip_input.c:449) ... According to the debug log, the same req received two SYN-ACK in a very short time, very likely because the client retransmits the syn ack due to multiple reasons. Even if the packets are transmitted with a relevant time interval, they can be processed by the server on different CPUs concurrently). The 'subflow_req->msk' ownership is transferred to the subflow the first, and there will be a risk of a null pointer dereference here. This patch fixes this issue by moving the 'subflow_req->msk' under the `own_req == true` conditional. Note that the !msk check in subflow_hmac_valid() can be dropped, because the same check already exists under the own_req mpj branch where the code has been moved to.

A null pointer dereference issue was found in the sctp network protocol in net/sctp/stream_sched.c in Linux Kernel. If stream_in allocation is failed, stream_out is freed which would further be accessed. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Fix null ptr deref in btintel_read_version If hci_cmd_sync_complete() is triggered and skb is NULL, then hdev->req_skb is NULL, which will cause this issue.

In the Linux kernel, the following vulnerability has been resolved: efi: fix panic in kdump kernel Check if get_next_variable() is actually valid pointer before calling it. In kdump kernel this method is set to NULL that causes panic during the kexec-ed kernel boot. Tested with QEMU and OVMF firmware.

In the Linux kernel, the following vulnerability has been resolved: tls: fix missing memory barrier in tls_init In tls_init(), a write memory barrier is missing, and store-store reordering may cause NULL dereference in tls_{setsockopt,getsockopt}. CPU0 CPU1 ----- ----- // In tls_init() // In tls_ctx_create() ctx = kzalloc() ctx->sk_proto = READ_ONCE(sk->sk_prot) -(1) // In update_sk_prot() WRITE_ONCE(sk->sk_prot, tls_prots) -(2) // In sock_common_setsockopt() READ_ONCE(sk->sk_prot)->setsockopt() // In tls_{setsockopt,getsockopt}() ctx->sk_proto->setsockopt() -(3) In the above scenario, when (1) and (2) are reordered, (3) can observe the NULL value of ctx->sk_proto, causing NULL dereference. To fix it, we rely on rcu_assign_pointer() which implies the release barrier semantic. By moving rcu_assign_pointer() after ctx->sk_proto is initialized, we can ensure that ctx->sk_proto are visible when changing sk->sk_prot.

A null pointer dereference issue was found in can protocol in net/can/af_can.c in the Linux before Linux. ml_priv may not be initialized in the receive path of CAN frames. A local user could use this flaw to crash the system or potentially cause a denial of service.

In the Linux kernel, the following vulnerability has been resolved: net: phy: phy_device: Prevent nullptr exceptions on ISR If phydev->irq is set unconditionally, check for valid interrupt handler or fall back to polling mode to prevent nullptr exceptions in interrupt service routine.

In the Linux kernel, the following vulnerability has been resolved: fpga: bridge: add owner module and take its refcount The current implementation of the fpga bridge assumes that the low-level module registers a driver for the parent device and uses its owner pointer to take the module's refcount. This approach is problematic since it can lead to a null pointer dereference while attempting to get the bridge if the parent device does not have a driver. To address this problem, add a module owner pointer to the fpga_bridge struct and use it to take the module's refcount. Modify the function for registering a bridge to take an additional owner module parameter and rename it to avoid conflicts. Use the old function name for a helper macro that automatically sets the module that registers the bridge as the owner. This ensures compatibility with existing low-level control modules and reduces the chances of registering a bridge without setting the owner. Also, update the documentation to keep it consistent with the new interface for registering an fpga bridge. Other changes: opportunistically move put_device() from __fpga_bridge_get() to fpga_bridge_get() and of_fpga_bridge_get() to improve code clarity since the bridge device is taken in these functions.

In the Linux kernel, the following vulnerability has been resolved: xdp: use flags field to disambiguate broadcast redirect When redirecting a packet using XDP, the bpf_redirect_map() helper will set up the redirect destination information in struct bpf_redirect_info (using the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect() function will read this information after the XDP program returns and pass the frame on to the right redirect destination. When using the BPF_F_BROADCAST flag to do multicast redirect to a whole map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct bpf_redirect_info to point to the destination map to be broadcast. And xdp_do_redirect() reacts to the value of this map pointer to decide whether it's dealing with a broadcast or a single-value redirect. However, if the destination map is being destroyed before xdp_do_redirect() is called, the map pointer will be cleared out (by bpf_clear_redirect_map()) without waiting for any XDP programs to stop running. This causes xdp_do_redirect() to think that the redirect was to a single target, but the target pointer is also NULL (since broadcast redirects don't have a single target), so this causes a crash when a NULL pointer is passed to dev_map_enqueue(). To fix this, change xdp_do_redirect() to react directly to the presence of the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info to disambiguate between a single-target and a broadcast redirect. And only read the 'map' pointer if the broadcast flag is set, aborting if that has been cleared out in the meantime. This prevents the crash, while keeping the atomic (cmpxchg-based) clearing of the map pointer itself, and without adding any more checks in the non-broadcast fast path.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix TZ_GET_TRIP NULL pointer dereference Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if the thermal zone does not define one.

In the Linux kernel, the following vulnerability has been resolved: acct: perform last write from workqueue In [1] it was reported that the acct(2) system call can be used to trigger NULL deref in cases where it is set to write to a file that triggers an internal lookup. This can e.g., happen when pointing acc(2) to /sys/power/resume. At the point the where the write to this file happens the calling task has already exited and called exit_fs(). A lookup will thus trigger a NULL-deref when accessing current->fs. Reorganize the code so that the the final write happens from the workqueue but with the caller's credentials. This preserves the (strange) permission model and has almost no regression risk. This api should stop to exist though.

In the Linux kernel, the following vulnerability has been resolved: arm64: Don't call NULL in do_compat_alignment_fixup() do_alignment_t32_to_handler() only fixes up alignment faults for specific instructions; it returns NULL otherwise (e.g. LDREX). When that's the case, signal to the caller that it needs to proceed with the regular alignment fault handling (i.e. SIGBUS). Without this patch, the kernel panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000006 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000800164aa000 [0000000000000000] pgd=0800081fdbd22003, p4d=0800081fdbd22003, pud=08000815d51c6003, pmd=0000000000000000 Internal error: Oops: 0000000086000006 [#1] SMP Modules linked in: cfg80211 rfkill xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat br_netfilter veth nvme_fa> libcrc32c crc32c_generic raid0 multipath linear dm_mod dax raid1 md_mod xhci_pci nvme xhci_hcd nvme_core t10_pi usbcore igb crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_ce crct10dif_common usb_common i2c_algo_bit i2c> CPU: 2 PID: 3932954 Comm: WPEWebProcess Not tainted 6.1.0-31-arm64 #1 Debian 6.1.128-1 Hardware name: GIGABYTE MP32-AR1-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : do_compat_alignment_fixup+0xd8/0x3dc sp : ffff80000f973dd0 x29: ffff80000f973dd0 x28: ffff081b42526180 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000001 x20: 00000000e8551f00 x19: ffff80000f973eb0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffaebc949bc488 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000400000 x4 : 0000fffffffffffe x3 : 0000000000000000 x2 : ffff80000f973eb0 x1 : 00000000e8551f00 x0 : 0000000000000001 Call trace: 0x0 do_alignment_fault+0x40/0x50 do_mem_abort+0x4c/0xa0 el0_da+0x48/0xf0 el0t_32_sync_handler+0x110/0x140 el0t_32_sync+0x190/0x194 Code: bad PC value ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower]

In the Linux kernel, the following vulnerability has been resolved: crypto: eip93 - fix hmac setkey algo selection eip93_hmac_setkey() allocates a temporary ahash transform for computing HMAC ipad/opad key material. The allocation uses the driver-specific cra_driver_name (e.g. "sha256-eip93") but passes CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms. Since the EIP93 hash algorithms are the only ones registered under those driver names and they are inherently async, the lookup is self-contradictory and always fails with -ENOENT. When called from the AEAD setkey path, this failure leaves the SA record partially initialized with zeroed digest fields. A subsequent crypto operation then dereferences a NULL pointer in the request context, resulting in a kernel panic: ``` pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93] lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93] sp : ffffffc082feb820 x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000 x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980 x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0 x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000 x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009 x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0 Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740) ``` The reported symbol eip93_aead_handle_result+0xc8c is a resolution artifact from static functions being merged under the nearest exported symbol. Decoding the faulting sequence: ``` 910142b6 ADD X22, X21, #0x50 f94012e0 LDR X0, [X23, #0x20] f9002aa0 STR X0, [X21, #0x50] f90006d3 STR X19, [X22, #0x8] f9400740 LDR X0, [X26, #0x8] ``` The faulting LDR at [X26, #0x8] is loading ctx->flags (offset 8 in eip93_hash_ctx), where ctx has been resolved to NULL from a partially initialized or unreachable transform context following the failed setkey. Fix this by dropping the CRYPTO_ALG_ASYNC mask from the crypto_alloc_ahash() call. The code already handles async completion correctly via crypto_wait_req(), so there is no requirement to restrict the lookup to synchronous algorithms. Note that hashing a single 64-byte block through the hardware is likely slower than doing it in software due to the DMA round-trip overhead, but offloading it may still spare CPU cycles on the slower embedded cores where this IP is found. [Detailed investigation report of this bug]

In the Linux kernel, the following vulnerability has been resolved: aio: Fix null ptr deref in aio_complete() wakeup list_del_init_careful() needs to be the last access to the wait queue entry - it effectively unlocks access. Previously, finish_wait() would see the empty list head and skip taking the lock, and then we'd return - but the completion path would still attempt to do the wakeup after the task_struct pointer had been overwritten.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid NULL dereference when RX problematic packet on unsupported 6 GHz band With a quite rare chance, RX report might be problematic to make SW think a packet is received on 6 GHz band even if the chip does not support 6 GHz band actually. Since SW won't initialize stuffs for unsupported bands, NULL dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() -> rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it. The following is a crash log for this case. BUG: kernel NULL pointer dereference, address: 0000000000000032 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4) Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024 RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core] Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11 41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45 32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85 RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246 RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011 RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6 RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000 R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4 R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)] __iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)] rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)] rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)]

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix af_unix null-ptr-deref in proto update unix_stream_connect() sets sk_state (`WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED)`) _before_ it assigns a peer (`unix_peer(sk) = newsk`). sk_state == TCP_ESTABLISHED makes sock_map_sk_state_allowed() believe that socket is properly set up, which would include having a defined peer. IOW, there's a window when unix_stream_bpf_update_proto() can be called on socket which still has unix_peer(sk) == NULL. CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) ... sk_pair = unix_peer(sk) sock_hold(sk_pair) sock_hold(newsk) smp_mb__after_atomic() unix_peer(sk) = newsk BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:unix_stream_bpf_update_proto+0xa0/0x1b0 Call Trace: sock_map_link+0x564/0x8b0 sock_map_update_common+0x6e/0x340 sock_map_update_elem_sys+0x17d/0x240 __sys_bpf+0x26db/0x3250 __x64_sys_bpf+0x21/0x30 do_syscall_64+0x6b/0x3a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Initial idea was to move peer assignment _before_ the sk_state update[1], but that involved an additional memory barrier, and changing the hot path was rejected. Then a NULL check during proto update in unix_stream_bpf_update_proto() was considered[2], but the follow-up discussion[3] focused on the root cause, i.e. sockmap update taking a wrong lock. Or, more specifically, missing unix_state_lock()[4]. In the end it was concluded that teaching sockmap about the af_unix locking would be unnecessarily complex[5]. Complexity aside, since BPF_PROG_TYPE_SCHED_CLS and BPF_PROG_TYPE_SCHED_ACT are allowed to update sockmaps, sock_map_update_elem() taking the unix lock, as it is currently implemented in unix_state_lock(): spin_lock(&unix_sk(s)->lock), would be problematic. unix_state_lock() taken in a process context, followed by a softirq-context TC BPF program attempting to take the same spinlock -- deadlock[6]. This way we circled back to the peer check idea[2]. [1]: https://lore.kernel.org/netdev/ba5c50aa-1df4-40c2-ab33-a72022c5a32e@rbox.co/ [2]: https://lore.kernel.org/netdev/20240610174906.32921-1-kuniyu@amazon.com/ [3]: https://lore.kernel.org/netdev/7603c0e6-cd5b-452b-b710-73b64bd9de26@linux.dev/ [4]: https://lore.kernel.org/netdev/CAAVpQUA+8GL_j63CaKb8hbxoL21izD58yr1NvhOhU=j+35+3og@mail.gmail.com/ [5]: https://lore.kernel.org/bpf/CAAVpQUAHijOMext28Gi10dSLuMzGYh+jK61Ujn+fZ-wvcODR2A@mail.gmail.com/ [6]: https://lore.kernel.org/bpf/dd043c69-4d03-46fe-8325-8f97101435cf@linux.dev/ Summary of scenarios where af_unix/stream connect() may race a sockmap update: 1. connect() vs. bpf(BPF_MAP_UPDATE_ELEM), i.e. sock_map_update_elem_sys() Implemented NULL check is sufficient. Once assigned, socket peer won't be released until socket fd is released. And that's not an issue because sock_map_update_elem_sys() bumps fd refcnf. 2. connect() vs BPF program doing update Update restricted per verifier.c:may_update_sockmap() to BPF_PROG_TYPE_TRACING/BPF_TRACE_ITER BPF_PROG_TYPE_SOCK_OPS (bpf_sock_map_update() only) BPF_PROG_TYPE_SOCKET_FILTER BPF_PROG_TYPE_SCHED_CLS BPF_PROG_TYPE_SCHED_ACT BPF_PROG_TYPE_XDP BPF_PROG_TYPE_SK_REUSEPORT BPF_PROG_TYPE_FLOW_DISSECTOR BPF_PROG_TYPE_SK_LOOKUP Plus one more race to consider: CPU0 bpf CPU1 connect -------- ------------ WRITE_ONCE(sk->sk_state, TCP_ESTABLISHED) sock_map_sk_state_allowed(sk) sock_hold(newsk) smp_mb__after_atomic() ---truncated---

In the Linux kernel, the following vulnerability has been resolved: smc: Fix various oops due to inet_sock type confusion. syzbot reported weird splats [0][1] in cipso_v4_sock_setattr() while freeing inet_sk(sk)->inet_opt. The address was freed multiple times even though it was read-only memory. cipso_v4_sock_setattr() did nothing wrong, and the root cause was type confusion. The cited commit made it possible to create smc_sock as an INET socket. The issue is that struct smc_sock does not have struct inet_sock as the first member but hijacks AF_INET and AF_INET6 sk_family, which confuses various places. In this case, inet_sock.inet_opt was actually smc_sock.clcsk_data_ready(), which is an address of a function in the text segment. $ pahole -C inet_sock vmlinux struct inet_sock { ... struct ip_options_rcu * inet_opt; /* 784 8 */ $ pahole -C smc_sock vmlinux struct smc_sock { ... void (*clcsk_data_ready)(struct sock *); /* 784 8 */ The same issue for another field was reported before. [2][3] At that time, an ugly hack was suggested [4], but it makes both INET and SMC code error-prone and hard to change. Also, yet another variant was fixed by a hacky commit 98d4435efcbf3 ("net/smc: prevent NULL pointer dereference in txopt_get"). Instead of papering over the root cause by such hacks, we should not allow non-INET socket to reuse the INET infra. Let's add inet_sock as the first member of smc_sock. [0]: kvfree_call_rcu(): Double-freed call. rcu_head 000000006921da73 WARNING: CPU: 0 PID: 6718 at mm/slab_common.c:1956 kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 Modules linked in: CPU: 0 UID: 0 PID: 6718 Comm: syz.0.17 Tainted: G W 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Tainted: [W]=WARN Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 lr : kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 sp : ffff8000a03a7730 x29: ffff8000a03a7730 x28: 00000000fffffff5 x27: 1fffe000184823d3 x26: dfff800000000000 x25: ffff0000c2411e9e x24: ffff0000dd88da00 x23: ffff8000891ac9a0 x22: 00000000ffffffea x21: ffff8000891ac9a0 x20: ffff8000891ac9a0 x19: ffff80008afc2480 x18: 00000000ffffffff x17: 0000000000000000 x16: ffff80008ae642c8 x15: ffff700011ede14c x14: 1ffff00011ede14c x13: 0000000000000004 x12: ffffffffffffffff x11: ffff700011ede14c x10: 0000000000ff0100 x9 : 5fa3c1ffaf0ff000 x8 : 5fa3c1ffaf0ff000 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000a03a7078 x4 : ffff80008f766c20 x3 : ffff80008054d360 x2 : 0000000000000000 x1 : 0000000000000201 x0 : 0000000000000000 Call trace: kvfree_call_rcu+0x94/0x3f0 mm/slab_common.c:1955 (P) cipso_v4_sock_setattr+0x2f0/0x3f4 net/ipv4/cipso_ipv4.c:1914 netlbl_sock_setattr+0x240/0x334 net/netlabel/netlabel_kapi.c:1000 smack_netlbl_add+0xa8/0x158 security/smack/smack_lsm.c:2581 smack_inode_setsecurity+0x378/0x430 security/smack/smack_lsm.c:2912 security_inode_setsecurity+0x118/0x3c0 security/security.c:2706 __vfs_setxattr_noperm+0x174/0x5c4 fs/xattr.c:251 __vfs_setxattr_locked+0x1ec/0x218 fs/xattr.c:295 vfs_setxattr+0x158/0x2ac fs/xattr.c:321 do_setxattr fs/xattr.c:636 [inline] file_setxattr+0x1b8/0x294 fs/xattr.c:646 path_setxattrat+0x2ac/0x320 fs/xattr.c:711 __do_sys_fsetxattr fs/xattr.c:761 [inline] __se_sys_fsetxattr fs/xattr.c:758 [inline] __arm64_sys_fsetxattr+0xc0/0xdc fs/xattr.c:758 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x180 arch/arm64/kernel/entry-common.c:879 el0t_64_sync_handler+0x84/0x12c arch/arm64/kernel/entry-common.c:898 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use list_first_entry_or_null for opinfo_get_list() The list_first_entry() macro never returns NULL. If the list is empty then it returns an invalid pointer. Use list_first_entry_or_null() to check if the list is empty.

A NULL pointer dereference was found in io_file_bitmap_get in io_uring/filetable.c in the io_uring sub-component in the Linux Kernel. When fixed files are unregistered, some context information (file_alloc_{start,end} and alloc_hint) is not cleared. A subsequent request that has auto index selection enabled via IORING_FILE_INDEX_ALLOC can cause a NULL pointer dereference. An unprivileged user can use the flaw to cause a system crash.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix NULL pointer access Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them.

In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Fix allocation of cleanest CLOSID on platforms with no monitors Commit 6eac36bb9eb0 ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid") added logic that causes resctrl to search for the CLOSID with the fewest dirty cache lines when creating a new control group, if requested by the arch code. This depends on the values read from the llc_occupancy counters. The logic is applicable to architectures where the CLOSID effectively forms part of the monitoring identifier and so do not allow complete freedom to choose an unused monitoring identifier for a given CLOSID. This support missed that some platforms may not have these counters. This causes a NULL pointer dereference when creating a new control group as the array was not allocated by dom_data_init(). As this feature isn't necessary on platforms that don't have cache occupancy monitors, add this to the check that occurs when a new control group is allocated.

In the Linux kernel, the following vulnerability has been resolved: pstore/zone: Add a null pointer check to the psz_kmsg_read kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: rto_min/max: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.

In the Linux kernel, the following vulnerability has been resolved: net: phy: clear phydev->devlink when the link is deleted There is a potential crash issue when disabling and re-enabling the network port. When disabling the network port, phy_detach() calls device_link_del() to remove the device link, but it does not clear phydev->devlink, so phydev->devlink is not a NULL pointer. Then the network port is re-enabled, but if phy_attach_direct() fails before calling device_link_add(), the code jumps to the "error" label and calls phy_detach(). Since phydev->devlink retains the old value from the previous attach/detach cycle, device_link_del() uses the old value, which accesses a NULL pointer and causes a crash. The simplified crash log is as follows. [ 24.702421] Call trace: [ 24.704856] device_link_put_kref+0x20/0x120 [ 24.709124] device_link_del+0x30/0x48 [ 24.712864] phy_detach+0x24/0x168 [ 24.716261] phy_attach_direct+0x168/0x3a4 [ 24.720352] phylink_fwnode_phy_connect+0xc8/0x14c [ 24.725140] phylink_of_phy_connect+0x1c/0x34 Therefore, phydev->devlink needs to be cleared when the device link is deleted.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Initialize frame-based format color matching descriptor Fix NULL pointer crash in uvcg_framebased_make due to uninitialized color matching descriptor for frame-based format which was added in commit f5e7bdd34aca ("usb: gadget: uvc: Allow creating new color matching descriptors") that added handling for uncompressed and mjpeg format. Crash is seen when userspace configuration (via configfs) does not explicitly define the color matching descriptor. If color_matching is not found, config_group_find_item() returns NULL. The code then jumps to out_put_cm, where it calls config_item_put(color_matching);. If color_matching is NULL, this will dereference a null pointer, leading to a crash. [ 2.746440] Unable to handle kernel NULL pointer dereference at virtual address 000000000000008c [ 2.756273] Mem abort info: [ 2.760080] ESR = 0x0000000096000005 [ 2.764872] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.771068] SET = 0, FnV = 0 [ 2.771069] EA = 0, S1PTW = 0 [ 2.771070] FSC = 0x05: level 1 translation fault [ 2.771071] Data abort info: [ 2.771072] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 2.771073] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.771074] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.771075] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000a3e59000 [ 2.771077] [000000000000008c] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 2.771081] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 2.771084] Dumping ftrace buffer: [ 2.771085] (ftrace buffer empty) [ 2.771138] CPU: 7 PID: 486 Comm: ln Tainted: G W E 6.6.58-android15 [ 2.771139] Hardware name: Qualcomm Technologies, Inc. SunP QRD HDK (DT) [ 2.771140] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.771141] pc : __uvcg_fill_strm+0x198/0x2cc [ 2.771145] lr : __uvcg_iter_strm_cls+0xc8/0x17c [ 2.771146] sp : ffffffc08140bbb0 [ 2.771146] x29: ffffffc08140bbb0 x28: ffffff803bc81380 x27: ffffff8023bbd250 [ 2.771147] x26: ffffff8023bbd250 x25: ffffff803c361348 x24: ffffff803d8e6768 [ 2.771148] x23: 0000000000000004 x22: 0000000000000003 x21: ffffffc08140bc48 [ 2.771149] x20: 0000000000000000 x19: ffffffc08140bc48 x18: ffffffe9f8cf4a00 [ 2.771150] x17: 000000001bf64ec3 x16: 000000001bf64ec3 x15: ffffff8023bbd250 [ 2.771151] x14: 000000000000000f x13: 004c4b40000f4240 x12: 000a2c2a00051615 [ 2.771152] x11: 000000000000004f x10: ffffffe9f76b40ec x9 : ffffffe9f7e389d0 [ 2.771153] x8 : ffffff803d0d31ce x7 : 000f4240000a2c2a x6 : 0005161500028b0a [ 2.771154] x5 : ffffff803d0d31ce x4 : 0000000000000003 x3 : 0000000000000000 [ 2.771155] x2 : ffffffc08140bc50 x1 : ffffffc08140bc48 x0 : 0000000000000000 [ 2.771156] Call trace: [ 2.771157] __uvcg_fill_strm+0x198/0x2cc [ 2.771157] __uvcg_iter_strm_cls+0xc8/0x17c [ 2.771158] uvcg_streaming_class_allow_link+0x240/0x290 [ 2.771159] configfs_symlink+0x1f8/0x630 [ 2.771161] vfs_symlink+0x114/0x1a0 [ 2.771163] do_symlinkat+0x94/0x28c [ 2.771164] __arm64_sys_symlinkat+0x54/0x70 [ 2.771164] invoke_syscall+0x58/0x114 [ 2.771166] el0_svc_common+0x80/0xe0 [ 2.771168] do_el0_svc+0x1c/0x28 [ 2.771169] el0_svc+0x3c/0x70 [ 2.771172] el0t_64_sync_handler+0x68/0xbc [ 2.771173] el0t_64_sync+0x1a8/0x1ac Initialize color matching descriptor for frame-based format to prevent NULL pointer crash by mirroring the handling done for uncompressed and mjpeg formats.

A NULL pointer dereference flaw was found in rawv6_push_pending_frames in net/ipv6/raw.c in the network subcomponent in the Linux kernel. This flaw causes the system to crash.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL pointer dereference in tipc_mon_reinit_self() syzbot reported: tipc: Node number set to 1055423674 Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 3 UID: 0 PID: 6017 Comm: kworker/3:5 Not tainted 6.15.0-rc1-syzkaller-00246-g900241a5cc15 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events tipc_net_finalize_work RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tipc_net_finalize+0x10b/0x180 net/tipc/net.c:140 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> ... RIP: 0010:tipc_mon_reinit_self+0x11c/0x210 net/tipc/monitor.c:719 ... RSP: 0018:ffffc9000356fb68 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003ee87cba RDX: 0000000000000000 RSI: ffffffff8dbc56a7 RDI: ffff88804c2cc010 RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: fffffbfff2111097 R14: ffff88804ead8000 R15: ffff88804ead9010 FS: 0000000000000000(0000) GS:ffff888097ab9000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f720eb00 CR3: 000000000e182000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 There is a racing condition between workqueue created when enabling bearer and another thread created when disabling bearer right after that as follow: enabling_bearer | disabling_bearer --------------- | ---------------- tipc_disc_timeout() | { | bearer_disable() ... | { schedule_work(&tn->work); | tipc_mon_delete() ... | { } | ... | write_lock_bh(&mon->lock); | mon->self = NULL; | write_unlock_bh(&mon->lock); | ... | } tipc_net_finalize_work() | } { | ... | tipc_net_finalize() | { | ... | tipc_mon_reinit_self() | { | ... | write_lock_bh(&mon->lock); | mon->self->addr = tipc_own_addr(net); | write_unlock_bh(&mon->lock); | ... ---truncated---