In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dp: Only trigger DRM HPD events if bridge is attached The MediaTek DisplayPort interface bridge driver starts its interrupts as soon as its probed. However when the interrupts trigger the bridge might not have been attached to a DRM device. As drm_helper_hpd_irq_event() does not check whether the passed in drm_device is valid or not, a NULL pointer passed in results in a kernel NULL pointer dereference in it. Check whether the bridge is attached and only trigger an HPD event if it is.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix unsafe drain work queue code If create_qp does not fully succeed it is possible for qp cleanup code to attempt to drain the send or recv work queues before the queues have been created causing a seg fault. This patch checks to see if the queues exist before attempting to drain them.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: Add missing check for alloc_ordered_workqueue Add check for the return value of alloc_ordered_workqueue as it may return NULL pointer and cause NULL pointer dereference. Patchwork: https://patchwork.freedesktop.org/patch/517646/

In the Linux kernel, the following vulnerability has been resolved: HID: hidraw: fix memory leak in hidraw_release() Free the buffered reports before deleting the list entry. BUG: memory leak unreferenced object 0xffff88810e72f180 (size 32): comm "softirq", pid 0, jiffies 4294945143 (age 16.080s) hex dump (first 32 bytes): 64 f3 c6 6a d1 88 07 04 00 00 00 00 00 00 00 00 d..j............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814ac6c3>] kmemdup+0x23/0x50 mm/util.c:128 [<ffffffff8357c1d2>] kmemdup include/linux/fortify-string.h:440 [inline] [<ffffffff8357c1d2>] hidraw_report_event+0xa2/0x150 drivers/hid/hidraw.c:521 [<ffffffff8356ddad>] hid_report_raw_event+0x27d/0x740 drivers/hid/hid-core.c:1992 [<ffffffff8356e41e>] hid_input_report+0x1ae/0x270 drivers/hid/hid-core.c:2065 [<ffffffff835f0d3f>] hid_irq_in+0x1ff/0x250 drivers/hid/usbhid/hid-core.c:284 [<ffffffff82d3c7f9>] __usb_hcd_giveback_urb+0xf9/0x230 drivers/usb/core/hcd.c:1670 [<ffffffff82d3cc26>] usb_hcd_giveback_urb+0x1b6/0x1d0 drivers/usb/core/hcd.c:1747 [<ffffffff82ef1e14>] dummy_timer+0x8e4/0x14c0 drivers/usb/gadget/udc/dummy_hcd.c:1988 [<ffffffff812f50a8>] call_timer_fn+0x38/0x200 kernel/time/timer.c:1474 [<ffffffff812f5586>] expire_timers kernel/time/timer.c:1519 [inline] [<ffffffff812f5586>] __run_timers.part.0+0x316/0x430 kernel/time/timer.c:1790 [<ffffffff812f56e4>] __run_timers kernel/time/timer.c:1768 [inline] [<ffffffff812f56e4>] run_timer_softirq+0x44/0x90 kernel/time/timer.c:1803 [<ffffffff848000e6>] __do_softirq+0xe6/0x2ea kernel/softirq.c:571 [<ffffffff81246db0>] invoke_softirq kernel/softirq.c:445 [inline] [<ffffffff81246db0>] __irq_exit_rcu kernel/softirq.c:650 [inline] [<ffffffff81246db0>] irq_exit_rcu+0xc0/0x110 kernel/softirq.c:662 [<ffffffff84574f02>] sysvec_apic_timer_interrupt+0xa2/0xd0 arch/x86/kernel/apic/apic.c:1106 [<ffffffff84600c8b>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:649 [<ffffffff8458a070>] native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline] [<ffffffff8458a070>] arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline] [<ffffffff8458a070>] acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline] [<ffffffff8458a070>] acpi_idle_do_entry+0xc0/0xd0 drivers/acpi/processor_idle.c:554

In the Linux kernel, the following vulnerability has been resolved: ipmi_si: fix a memleak in try_smi_init() Kmemleak reported the following leak info in try_smi_init(): unreferenced object 0xffff00018ecf9400 (size 1024): comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s) backtrace: [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0 [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si] [<000000006460d325>] 0xffff800081b10148 [<0000000039206ea5>] do_one_initcall+0x64/0x2a4 [<00000000601399ce>] do_init_module+0x50/0x300 [<000000003c12ba3c>] load_module+0x7a8/0x9e0 [<00000000c246fffe>] __se_sys_init_module+0x104/0x180 [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30 [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250 [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0 [<000000005a05337f>] el0_svc+0x24/0x3c [<000000005eb248d6>] el0_sync_handler+0x160/0x164 [<0000000030a59039>] el0_sync+0x160/0x180 The problem was that when an error occurred before handlers registration and after allocating `new_smi->si_sm`, the variable wouldn't be freed in the error handling afterwards since `shutdown_smi()` hadn't been registered yet. Fix it by adding a `kfree()` in the error handling path in `try_smi_init()`.

In the Linux kernel, the following vulnerability has been resolved: net: fix net_dev_start_xmit trace event vs skb_transport_offset() After blamed commit, we must be more careful about using skb_transport_offset(), as reminded us by syzbot: WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline] WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Modules linked in: CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline] RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff RSP: 0018:ffffc900002bf700 EFLAGS: 00010293 RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67 R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline] [<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline] [<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660 [<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108 [<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127 [<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] [<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] [<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701 [<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289 [<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436

In the Linux kernel, the following vulnerability has been resolved: caif: fix memory leak in cfctrl_linkup_request() When linktype is unknown or kzalloc failed in cfctrl_linkup_request(), pkt is not released. Add release process to error path.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check for null return of devm_kzalloc() in dpu_writeback_init() Because of the possilble failure of devm_kzalloc(), dpu_wb_conn might be NULL and will cause null pointer dereference later. Therefore, it might be better to check it and directly return -ENOMEM. Patchwork: https://patchwork.freedesktop.org/patch/512277/ [DB: fixed typo in commit message]

In the Linux kernel, the following vulnerability has been resolved: media: pci: tw68: Fix null-ptr-deref bug in buf prepare and finish When the driver calls tw68_risc_buffer() to prepare the buffer, the function call dma_alloc_coherent may fail, resulting in a empty buffer buf->cpu. Later when we free the buffer or access the buffer, null ptr deref is triggered. This bug is similar to the following one: https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71. We believe the bug can be also dynamically triggered from user side. Similarly, we fix this by checking the return value of tw68_risc_buffer() and the value of buf->cpu before buffer free.

In the Linux kernel, the following vulnerability has been resolved: USB: ULPI: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: drop all currently held locks if deadlock happens If vc4_hdmi_reset_link() returns -EDEADLK, it means that a deadlock happened in the locking context. This situation should be addressed by dropping all currently held locks and block until the contended lock becomes available. Currently, vc4 is not dealing with the deadlock properly, producing the following output when PROVE_LOCKING is enabled: [ 825.612809] ------------[ cut here ]------------ [ 825.612852] WARNING: CPU: 1 PID: 116 at drivers/gpu/drm/drm_modeset_lock.c:276 drm_modeset_drop_locks+0x60/0x68 [drm] [ 825.613458] Modules linked in: 8021q mrp garp stp llc raspberrypi_cpufreq brcmfmac brcmutil crct10dif_ce hci_uart cfg80211 btqca btbcm bluetooth vc4 raspberrypi_hwmon snd_soc_hdmi_codec cec clk_raspberrypi ecdh_generic drm_display_helper ecc rfkill drm_dma_helper drm_kms_helper pwm_bcm2835 bcm2835_thermal bcm2835_rng rng_core i2c_bcm2835 drm fuse ip_tables x_tables ipv6 [ 825.613735] CPU: 1 PID: 116 Comm: kworker/1:2 Tainted: G W 6.1.0-rc6-01399-g941aae326315 #3 [ 825.613759] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 825.613777] Workqueue: events output_poll_execute [drm_kms_helper] [ 825.614038] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 825.614063] pc : drm_modeset_drop_locks+0x60/0x68 [drm] [ 825.614603] lr : drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper] [ 825.614829] sp : ffff800008313bf0 [ 825.614844] x29: ffff800008313bf0 x28: ffffcd7778b8b000 x27: 0000000000000000 [ 825.614883] x26: 0000000000000001 x25: 0000000000000001 x24: ffff677cc35c2758 [ 825.614920] x23: ffffcd7707d01430 x22: ffffcd7707c3edc7 x21: 0000000000000001 [ 825.614958] x20: 0000000000000000 x19: ffff800008313c10 x18: 000000000000b6d3 [ 825.614995] x17: ffffcd777835e214 x16: ffffcd7777cef870 x15: fffff81000000000 [ 825.615033] x14: 0000000000000000 x13: 0000000000000099 x12: 0000000000000002 [ 825.615070] x11: 72917988020af800 x10: 72917988020af800 x9 : 72917988020af800 [ 825.615108] x8 : ffff677cc665e0a8 x7 : d00a8c180000110c x6 : ffffcd77774c0054 [ 825.615145] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 [ 825.615181] x2 : ffff677cc55e1880 x1 : ffffcd7777cef8ec x0 : ffff800008313c10 [ 825.615219] Call trace: [ 825.615232] drm_modeset_drop_locks+0x60/0x68 [drm] [ 825.615773] drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper] [ 825.616003] output_poll_execute+0xe4/0x224 [drm_kms_helper] [ 825.616233] process_one_work+0x2b4/0x618 [ 825.616264] worker_thread+0x24c/0x464 [ 825.616288] kthread+0xec/0x110 [ 825.616310] ret_from_fork+0x10/0x20 [ 825.616335] irq event stamp: 7634 [ 825.616349] hardirqs last enabled at (7633): [<ffffcd777831ee90>] _raw_spin_unlock_irq+0x3c/0x78 [ 825.616384] hardirqs last disabled at (7634): [<ffffcd7778315a78>] __schedule+0x134/0x9f0 [ 825.616411] softirqs last enabled at (7630): [<ffffcd7707aacea0>] local_bh_enable+0x4/0x30 [ipv6] [ 825.617019] softirqs last disabled at (7618): [<ffffcd7707aace70>] local_bh_disable+0x4/0x30 [ipv6] [ 825.617586] ---[ end trace 0000000000000000 ]--- Therefore, deal with the deadlock as suggested by [1], using the function drm_modeset_backoff(). [1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix leak of 'r10bio->remaining' for recovery raid10_sync_request() will add 'r10bio->remaining' for both rdev and replacement rdev. However, if the read io fails, recovery_request_write() returns without issuing the write io, in this case, end_sync_request() is only called once and 'remaining' is leaked, cause an io hang. Fix the problem by decreasing 'remaining' according to if 'bio' and 'repl_bio' is valid.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: qcom: Fix potential memory leak Function dwc3_qcom_probe() allocates memory for resource structure which is pointed by parent_res pointer. This memory is not freed. This leads to memory leak. Use stack memory to prevent memory leak. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: bcm63xx_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Do not corrupt the pfn list when doing batch carry If batch->end is 0 then setting npfns[0] before computing the new value of pfns will fail to adjust the pfn and result in various page accounting corruptions. It should be ordered after. This seems to result in various kinds of page meta-data corruption related failures: WARNING: CPU: 1 PID: 527 at mm/gup.c:75 try_grab_folio+0x503/0x740 Modules linked in: CPU: 1 PID: 527 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:try_grab_folio+0x503/0x740 Code: e3 01 48 89 de e8 6d c1 dd ff 48 85 db 0f 84 7c fe ff ff e8 4f bf dd ff 49 8d 47 ff 48 89 45 d0 e9 73 fe ff ff e8 3d bf dd ff <0f> 0b 31 db e9 d0 fc ff ff e8 2f bf dd ff 48 8b 5d c8 31 ff 48 89 RSP: 0018:ffffc90000f37908 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000fffffc02 RCX: ffffffff81504c26 RDX: 0000000000000000 RSI: ffff88800d030000 RDI: 0000000000000002 RBP: ffffc90000f37948 R08: 000000000003ca24 R09: 0000000000000008 R10: 000000000003ca00 R11: 0000000000000023 R12: ffffea000035d540 R13: 0000000000000001 R14: 0000000000000000 R15: ffffea000035d540 FS: 00007fecbf659740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200011c3 CR3: 000000000ef66006 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> internal_get_user_pages_fast+0xd32/0x2200 pin_user_pages_fast+0x65/0x90 pfn_reader_user_pin+0x376/0x390 pfn_reader_next+0x14a/0x7b0 pfn_reader_first+0x140/0x1b0 iopt_area_fill_domain+0x74/0x210 iopt_table_add_domain+0x30e/0x6e0 iommufd_device_selftest_attach+0x7f/0x140 iommufd_test+0x10ff/0x16f0 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in do_rename If renaming a file in an encrypted directory, function fscrypt_setup_filename allocates memory for a file name. This name is never used, and before returning to the caller the memory for it is not freed. When running kmemleak on it we see that it is registered as a leak. The report below is triggered by a simple program 'rename' that renames a file in an encrypted directory: unreferenced object 0xffff888101502840 (size 32): comm "rename", pid 9404, jiffies 4302582475 (age 435.735s) backtrace: __kmem_cache_alloc_node __kmalloc fscrypt_setup_filename do_rename ubifs_rename vfs_rename do_renameat2 To fix this we can remove the call to fscrypt_setup_filename as it's not needed.

In the Linux kernel, the following vulnerability has been resolved: PM: EM: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes A bad USB device is able to construct a service connection response message with target endpoint being ENDPOINT0 which is reserved for HTC_CTRL_RSVD_SVC and should not be modified to be used for any other services. Reject such service connection responses. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: free iio for atombios when driver shutdown Fix below kmemleak when unload radeon driver: unreferenced object 0xffff9f8608ede200 (size 512): comm "systemd-udevd", pid 326, jiffies 4294682822 (age 716.338s) hex dump (first 32 bytes): 00 00 00 00 c4 aa ec aa 14 ab 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000062fadebe>] kmem_cache_alloc_trace+0x2f1/0x500 [<00000000b6883cea>] atom_parse+0x117/0x230 [radeon] [<00000000158c23fd>] radeon_atombios_init+0xab/0x170 [radeon] [<00000000683f672e>] si_init+0x57/0x750 [radeon] [<00000000566cc31f>] radeon_device_init+0x559/0x9c0 [radeon] [<0000000046efabb3>] radeon_driver_load_kms+0xc1/0x1a0 [radeon] [<00000000b5155064>] drm_dev_register+0xdd/0x1d0 [<0000000045fec835>] radeon_pci_probe+0xbd/0x100 [radeon] [<00000000e69ecca3>] pci_device_probe+0xe1/0x160 [<0000000019484b76>] really_probe.part.0+0xc1/0x2c0 [<000000003f2649da>] __driver_probe_device+0x96/0x130 [<00000000231c5bb1>] driver_probe_device+0x24/0xf0 [<0000000000a42377>] __driver_attach+0x77/0x190 [<00000000d7574da6>] bus_for_each_dev+0x7f/0xd0 [<00000000633166d2>] driver_attach+0x1e/0x30 [<00000000313b05b8>] bus_add_driver+0x12c/0x1e0 iio was allocated in atom_index_iio() called by atom_parse(), but it doesn't got released when the dirver is shutdown. Fix this kmemleak by free it in radeon_atombios_fini().

In the Linux kernel, the following vulnerability has been resolved: USB: uhci: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix unpinning of pages when an access is present syzkaller found that the calculation of batch_last_index should use 'start_index' since at input to this function the batch is either empty or it has already been adjusted to cross any accesses so it will start at the point we are unmapping from. Getting this wrong causes the unmap to run over the end of the pages which corrupts pages that were never mapped. In most cases this triggers the num pinned debugging: WARNING: CPU: 0 PID: 557 at drivers/iommu/iommufd/pages.c:294 __iopt_area_unfill_domain+0x152/0x560 Modules linked in: CPU: 0 PID: 557 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__iopt_area_unfill_domain+0x152/0x560 Code: d2 0f ff 44 8b 64 24 54 48 8b 44 24 48 31 ff 44 89 e6 48 89 44 24 38 e8 fc d3 0f ff 45 85 e4 0f 85 eb 01 00 00 e8 0e d2 0f ff <0f> 0b e8 07 d2 0f ff 48 8b 44 24 38 89 5c 24 58 89 18 8b 44 24 54 RSP: 0018:ffffc9000108baf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffffffff821e3f85 RDX: 0000000000000000 RSI: ffff88800faf0000 RDI: 0000000000000002 RBP: ffffc9000108bd18 R08: 000000000003ca25 R09: 0000000000000014 R10: 000000000003ca00 R11: 0000000000000024 R12: 0000000000000004 R13: 0000000000000801 R14: 00000000000007ff R15: 0000000000000800 FS: 00007f3499ce1740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000243 CR3: 00000000179c2001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> iopt_area_unfill_domain+0x32/0x40 iopt_table_remove_domain+0x23f/0x4c0 iommufd_device_selftest_detach+0x3a/0x90 iommufd_selftest_destroy+0x55/0x70 iommufd_object_destroy_user+0xce/0x130 iommufd_destroy+0xa2/0xc0 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Also add some useful WARN_ON sanity checks.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix potential NULL pointer dereference Klocwork tool reported 'cur_dsd' may be dereferenced. Add fix to validate pointer before dereferencing the pointer.

In the Linux kernel, the following vulnerability has been resolved: nfsd: clean up potential nfsd_file refcount leaks in COPY codepath There are two different flavors of the nfsd4_copy struct. One is embedded in the compound and is used directly in synchronous copies. The other is dynamically allocated, refcounted and tracked in the client struture. For the embedded one, the cleanup just involves releasing any nfsd_files held on its behalf. For the async one, the cleanup is a bit more involved, and we need to dequeue it from lists, unhash it, etc. There is at least one potential refcount leak in this code now. If the kthread_create call fails, then both the src and dst nfsd_files in the original nfsd4_copy object are leaked. The cleanup in this codepath is also sort of weird. In the async copy case, we'll have up to four nfsd_file references (src and dst for both flavors of copy structure). They are both put at the end of nfsd4_do_async_copy, even though the ones held on behalf of the embedded one outlive that structure. Change it so that we always clean up the nfsd_file refs held by the embedded copy structure before nfsd4_copy returns. Rework cleanup_async_copy to handle both inter and intra copies. Eliminate nfsd4_cleanup_intra_ssc since it now becomes a no-op.

In the Linux kernel, the following vulnerability has been resolved: md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid() r5l_flush_stripe_to_raid() will check if the list 'flushing_ios' is empty, and then submit 'flush_bio', however, r5l_log_flush_endio() is clearing the list first and then clear the bio, which will cause null-ptr-deref: T1: submit flush io raid5d handle_active_stripes r5l_flush_stripe_to_raid // list is empty // add 'io_end_ios' to the list bio_init submit_bio // io1 T2: io1 is done r5l_log_flush_endio list_splice_tail_init // clear the list T3: submit new flush io ... r5l_flush_stripe_to_raid // list is empty // add 'io_end_ios' to the list bio_init bio_uninit // clear bio->bi_blkg submit_bio // null-ptr-deref Fix this problem by clearing bio before clearing the list in r5l_log_flush_endio().

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Fix a null-ptr-deref bug in buffer_prepare() and buffer_finish() When the driver calls cx23885_risc_buffer() to prepare the buffer, the function call dma_alloc_coherent may fail, resulting in a empty buffer risc->cpu. Later when we free the buffer or access the buffer, null ptr deref is triggered. This bug is similar to the following one: https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71. We believe the bug can be also dynamically triggered from user side. Similarly, we fix this by checking the return value of cx23885_risc_buffer() and the value of risc->cpu before buffer free.

In the Linux kernel, the following vulnerability has been resolved: spi: qup: Don't skip cleanup in remove's error path Returning early in a platform driver's remove callback is wrong. In this case the dma resources are not released in the error path. this is never retried later and so this is a permanent leak. To fix this, only skip hardware disabling if waking the device fails.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver After loading the amd-pstate-ut driver, amd_pstate_ut_check_perf() and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policy of the CPU and mark it as busy. In these functions, cpufreq_cpu_put() should be used to release the policy, but it is not, so any other entity trying to access the policy is blocked indefinitely. One such scenario is when amd_pstate mode is changed, leading to the following splat: [ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds. [ 1332.110001] Not tainted 6.5.0-rc2-amd-pstate-ut #5 [ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1332.123140] task:bash state:D stack:0 pid:2929 ppid:2873 flags:0x00004006 [ 1332.123143] Call Trace: [ 1332.123145] <TASK> [ 1332.123148] __schedule+0x3c1/0x16a0 [ 1332.123154] ? _raw_read_lock_irqsave+0x2d/0x70 [ 1332.123157] schedule+0x6f/0x110 [ 1332.123160] schedule_timeout+0x14f/0x160 [ 1332.123162] ? preempt_count_add+0x86/0xd0 [ 1332.123165] __wait_for_common+0x92/0x190 [ 1332.123168] ? __pfx_schedule_timeout+0x10/0x10 [ 1332.123170] wait_for_completion+0x28/0x30 [ 1332.123173] cpufreq_policy_put_kobj+0x4d/0x90 [ 1332.123177] cpufreq_policy_free+0x157/0x1d0 [ 1332.123178] ? preempt_count_add+0x58/0xd0 [ 1332.123180] cpufreq_remove_dev+0xb6/0x100 [ 1332.123182] subsys_interface_unregister+0x114/0x120 [ 1332.123185] ? preempt_count_add+0x58/0xd0 [ 1332.123187] ? __pfx_amd_pstate_change_driver_mode+0x10/0x10 [ 1332.123190] cpufreq_unregister_driver+0x3b/0xd0 [ 1332.123192] amd_pstate_change_driver_mode+0x1e/0x50 [ 1332.123194] store_status+0xe9/0x180 [ 1332.123197] dev_attr_store+0x1b/0x30 [ 1332.123199] sysfs_kf_write+0x42/0x50 [ 1332.123202] kernfs_fop_write_iter+0x143/0x1d0 [ 1332.123204] vfs_write+0x2df/0x400 [ 1332.123208] ksys_write+0x6b/0xf0 [ 1332.123210] __x64_sys_write+0x1d/0x30 [ 1332.123213] do_syscall_64+0x60/0x90 [ 1332.123216] ? fpregs_assert_state_consistent+0x2e/0x50 [ 1332.123219] ? exit_to_user_mode_prepare+0x49/0x1a0 [ 1332.123223] ? irqentry_exit_to_user_mode+0xd/0x20 [ 1332.123225] ? irqentry_exit+0x3f/0x50 [ 1332.123226] ? exc_page_fault+0x8e/0x190 [ 1332.123228] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1332.123232] RIP: 0033:0x7fa74c514a37 [ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37 [ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001 [ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff [ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 [ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00 [ 1332.123247] </TASK> Fix this by calling cpufreq_cpu_put() wherever necessary. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: x86: fix clear_user_rep_good() exception handling annotation This code no longer exists in mainline, because it was removed in commit d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") upstream. However, rather than backport the full range of x86 memory clearing and copying cleanups, fix the exception table annotation placement for the final 'rep movsb' in clear_user_rep_good(): rather than pointing at the actual instruction that did the user space access, it pointed to the register move just before it. That made sense from a code flow standpoint, but not from an actual usage standpoint: it means that if user access takes an exception, the exception handler won't actually find the instruction in the exception tables. As a result, rather than fixing it up and returning -EFAULT, it would then turn it into a kernel oops report instead, something like: BUG: unable to handle page fault for address: 0000000020081000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page ... RIP: 0010:clear_user_rep_good+0x1c/0x30 arch/x86/lib/clear_page_64.S:147 ... Call Trace: __clear_user arch/x86/include/asm/uaccess_64.h:103 [inline] clear_user arch/x86/include/asm/uaccess_64.h:124 [inline] iov_iter_zero+0x709/0x1290 lib/iov_iter.c:800 iomap_dio_hole_iter fs/iomap/direct-io.c:389 [inline] iomap_dio_iter fs/iomap/direct-io.c:440 [inline] __iomap_dio_rw+0xe3d/0x1cd0 fs/iomap/direct-io.c:601 iomap_dio_rw+0x40/0xa0 fs/iomap/direct-io.c:689 ext4_dio_read_iter fs/ext4/file.c:94 [inline] ext4_file_read_iter+0x4be/0x690 fs/ext4/file.c:145 call_read_iter include/linux/fs.h:2183 [inline] do_iter_readv_writev+0x2e0/0x3b0 fs/read_write.c:733 do_iter_read+0x2f2/0x750 fs/read_write.c:796 vfs_readv+0xe5/0x150 fs/read_write.c:916 do_preadv+0x1b6/0x270 fs/read_write.c:1008 __do_sys_preadv2 fs/read_write.c:1070 [inline] __se_sys_preadv2 fs/read_write.c:1061 [inline] __x64_sys_preadv2+0xef/0x150 fs/read_write.c:1061 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd which then looks like a filesystem bug rather than the incorrect exception annotation that it is. [ The alternative to this one-liner fix is to take the upstream series that cleans this all up: 68674f94ffc9 ("x86: don't use REP_GOOD or ERMS for small memory copies") 20f3337d350c ("x86: don't use REP_GOOD or ERMS for small memory clearing") adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies") * d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") 3639a535587d ("x86: move stac/clac from user copy routines into callers") 577e6a7fd50d ("x86: inline the 'rep movs' in user copies for the FSRM case") 8c9b6a88b7e2 ("x86: improve on the non-rep 'clear_user' function") 427fda2c8a49 ("x86: improve on the non-rep 'copy_user' function") * e046fe5a36a9 ("x86: set FSRS automatically on AMD CPUs that have FSRM") e1f2750edc4a ("x86: remove 'zerorest' argument from __copy_user_nocache()") 034ff37d3407 ("x86: rewrite '__copy_user_nocache' function") with either the whole series or at a minimum the two marked commits being needed to fix this issue ]

In the Linux kernel, the following vulnerability has been resolved: x86/MCE: Always save CS register on AMD Zen IF Poison errors The Instruction Fetch (IF) units on current AMD Zen-based systems do not guarantee a synchronous #MC is delivered for poison consumption errors. Therefore, MCG_STATUS[EIPV|RIPV] will not be set. However, the microarchitecture does guarantee that the exception is delivered within the same context. In other words, the exact rIP is not known, but the context is known to not have changed. There is no architecturally-defined method to determine this behavior. The Code Segment (CS) register is always valid on such IF unit poison errors regardless of the value of MCG_STATUS[EIPV|RIPV]. Add a quirk to save the CS register for poison consumption from the IF unit banks. This is needed to properly determine the context of the error. Otherwise, the severity grading function will assume the context is IN_KERNEL due to the m->cs value being 0 (the initialized value). This leads to unnecessary kernel panics on data poison errors due to the kernel believing the poison consumption occurred in kernel context.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Grab sas_dev lock when traversing the members of sas_dev.list When freeing slots in function slot_complete_v3_hw(), it is possible that sas_dev.list is being traversed elsewhere, and it may trigger a NULL pointer exception, such as follows: ==>cq thread ==>scsi_eh_6 ==>scsi_error_handler() ==>sas_eh_handle_sas_errors() ==>sas_scsi_find_task() ==>lldd_abort_task() ==>slot_complete_v3_hw() ==>hisi_sas_abort_task() ==>hisi_sas_slot_task_free() ==>dereg_device_v3_hw() ==>list_del_init() ==>list_for_each_entry_safe() [ 7165.434918] sas: Enter sas_scsi_recover_host busy: 32 failed: 32 [ 7165.434926] sas: trying to find task 0x00000000769b5ba5 [ 7165.434927] sas: sas_scsi_find_task: aborting task 0x00000000769b5ba5 [ 7165.434940] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000769b5ba5) aborted [ 7165.434964] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000c9f7aa07) ignored [ 7165.434965] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000e2a1cf01) ignored [ 7165.434968] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 7165.434972] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000022d52d93) ignored [ 7165.434975] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000066a7516c) ignored [ 7165.434976] Mem abort info: [ 7165.434982] ESR = 0x96000004 [ 7165.434991] Exception class = DABT (current EL), IL = 32 bits [ 7165.434992] SET = 0, FnV = 0 [ 7165.434993] EA = 0, S1PTW = 0 [ 7165.434994] Data abort info: [ 7165.434994] ISV = 0, ISS = 0x00000004 [ 7165.434995] CM = 0, WnR = 0 [ 7165.434997] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f29543f2 [ 7165.434998] [0000000000000000] pgd=0000000000000000 [ 7165.435003] Internal error: Oops: 96000004 [#1] SMP [ 7165.439863] Process scsi_eh_6 (pid: 4109, stack limit = 0x00000000c43818d5) [ 7165.468862] pstate: 00c00009 (nzcv daif +PAN +UAO) [ 7165.473637] pc : dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.479443] lr : dereg_device_v3_hw+0x2c/0xa8 [hisi_sas_v3_hw] [ 7165.485247] sp : ffff00001d623bc0 [ 7165.488546] x29: ffff00001d623bc0 x28: ffffa027d03b9508 [ 7165.493835] x27: ffff80278ed50af0 x26: ffffa027dd31e0a8 [ 7165.499123] x25: ffffa027d9b27f88 x24: ffffa027d9b209f8 [ 7165.504411] x23: ffffa027c45b0d60 x22: ffff80278ec07c00 [ 7165.509700] x21: 0000000000000008 x20: ffffa027d9b209f8 [ 7165.514988] x19: ffffa027d9b27f88 x18: ffffffffffffffff [ 7165.520276] x17: 0000000000000000 x16: 0000000000000000 [ 7165.525564] x15: ffff0000091d9708 x14: ffff0000093b7dc8 [ 7165.530852] x13: ffff0000093b7a23 x12: 6e7265746e692067 [ 7165.536140] x11: 0000000000000000 x10: 0000000000000bb0 [ 7165.541429] x9 : ffff00001d6238f0 x8 : ffffa027d877af00 [ 7165.546718] x7 : ffffa027d6329600 x6 : ffff7e809f58ca00 [ 7165.552006] x5 : 0000000000001f8a x4 : 000000000000088e [ 7165.557295] x3 : ffffa027d9b27fa8 x2 : 0000000000000000 [ 7165.562583] x1 : 0000000000000000 x0 : 000000003000188e [ 7165.567872] Call trace: [ 7165.570309] dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.575775] hisi_sas_abort_task+0x248/0x358 [hisi_sas_main] [ 7165.581415] sas_eh_handle_sas_errors+0x258/0x8e0 [libsas] [ 7165.586876] sas_scsi_recover_host+0x134/0x458 [libsas] [ 7165.592082] scsi_error_handler+0xb4/0x488 [ 7165.596163] kthread+0x134/0x138 [ 7165.599380] ret_from_fork+0x10/0x18 [ 7165.602940] Code: d5033e9f b9000040 aa0103e2 eb03003f (f9400021) [ 7165.609004] kernel fault(0x1) notification starting on CPU 75 [ 7165.700728] ---[ end trace fc042cbbea224efc ]--- [ 7165.705326] Kernel panic - not syncing: Fatal exception To fix the issue, grab sas_dev lock when traversing the members of sas_dev.list in dereg_device_v3_hw() and hisi_sas_release_tasks() to avoid concurrency of adding and deleting member. When ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leaks in ext4_fname_{setup_filename,prepare_lookup} If the filename casefolding fails, we'll be leaking memory from the fscrypt_name struct, namely from the 'crypto_buf.name' member. Make sure we free it in the error path on both ext4_fname_setup_filename() and ext4_fname_prepare_lookup() functions.

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix a leak in map_user_pages() If get_user_pages_fast() allocates some pages but not as many as we wanted, then the current code leaks those pages. Call put_page() on the pages before returning.

In the Linux kernel, the following vulnerability has been resolved: USB: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: x86/platform/uv: Use alternate source for socket to node data The UV code attempts to build a set of tables to allow it to do bidirectional socket<=>node lookups. But when nr_cpus is set to a smaller number than actually present, the cpu_to_node() mapping information for unused CPUs is not available to build_socket_tables(). This results in skipping some nodes or sockets when creating the tables and leaving some -1's for later code to trip. over, causing oopses. The problem is that the socket<=>node lookups are created by doing a loop over all CPUs, then looking up the CPU's APICID and socket. But if a CPU is not present, there is no way to start this lookup. Instead of looping over all CPUs, take CPUs out of the equation entirely. Loop over all APICIDs which are mapped to a valid NUMA node. Then just extract the socket-id from the APICID. This avoid tripping over disabled CPUs.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Range check CHDBOFF and ERDBOFF If the value read from the CHDBOFF and ERDBOFF registers is outside the range of the MHI register space then an invalid address might be computed which later causes a kernel panic. Range check the read value to prevent a crash due to bad data from the device.

In the Linux kernel, the following vulnerability has been resolved: srcu: Delegate work to the boot cpu if using SRCU_SIZE_SMALL Commit 994f706872e6 ("srcu: Make Tree SRCU able to operate without snp_node array") assumes that cpu 0 is always online. However, there really are situations when some other CPU is the boot CPU, for example, when booting a kdump kernel with the maxcpus=1 boot parameter. On PowerPC, the kdump kernel can hang as follows: ... [ 1.740036] systemd[1]: Hostname set to <xyz.com> [ 243.686240] INFO: task systemd:1 blocked for more than 122 seconds. [ 243.686264] Not tainted 6.1.0-rc1 #1 [ 243.686272] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.686281] task:systemd state:D stack:0 pid:1 ppid:0 flags:0x00042000 [ 243.686296] Call Trace: [ 243.686301] [c000000016657640] [c000000016657670] 0xc000000016657670 (unreliable) [ 243.686317] [c000000016657830] [c00000001001dec0] __switch_to+0x130/0x220 [ 243.686333] [c000000016657890] [c000000010f607b8] __schedule+0x1f8/0x580 [ 243.686347] [c000000016657940] [c000000010f60bb4] schedule+0x74/0x140 [ 243.686361] [c0000000166579b0] [c000000010f699b8] schedule_timeout+0x168/0x1c0 [ 243.686374] [c000000016657a80] [c000000010f61de8] __wait_for_common+0x148/0x360 [ 243.686387] [c000000016657b20] [c000000010176bb0] __flush_work.isra.0+0x1c0/0x3d0 [ 243.686401] [c000000016657bb0] [c0000000105f2768] fsnotify_wait_marks_destroyed+0x28/0x40 [ 243.686415] [c000000016657bd0] [c0000000105f21b8] fsnotify_destroy_group+0x68/0x160 [ 243.686428] [c000000016657c40] [c0000000105f6500] inotify_release+0x30/0xa0 [ 243.686440] [c000000016657cb0] [c0000000105751a8] __fput+0xc8/0x350 [ 243.686452] [c000000016657d00] [c00000001017d524] task_work_run+0xe4/0x170 [ 243.686464] [c000000016657d50] [c000000010020e94] do_notify_resume+0x134/0x140 [ 243.686478] [c000000016657d80] [c00000001002eb18] interrupt_exit_user_prepare_main+0x198/0x270 [ 243.686493] [c000000016657de0] [c00000001002ec60] syscall_exit_prepare+0x70/0x180 [ 243.686505] [c000000016657e10] [c00000001000bf7c] system_call_vectored_common+0xfc/0x280 [ 243.686520] --- interrupt: 3000 at 0x7fffa47d5ba4 [ 243.686528] NIP: 00007fffa47d5ba4 LR: 0000000000000000 CTR: 0000000000000000 [ 243.686538] REGS: c000000016657e80 TRAP: 3000 Not tainted (6.1.0-rc1) [ 243.686548] MSR: 800000000000d033 <SF,EE,PR,ME,IR,DR,RI,LE> CR: 42044440 XER: 00000000 [ 243.686572] IRQMASK: 0 [ 243.686572] GPR00: 0000000000000006 00007ffffa606710 00007fffa48e7200 0000000000000000 [ 243.686572] GPR04: 0000000000000002 000000000000000a 0000000000000000 0000000000000001 [ 243.686572] GPR08: 000001000c172dd0 0000000000000000 0000000000000000 0000000000000000 [ 243.686572] GPR12: 0000000000000000 00007fffa4ff4bc0 0000000000000000 0000000000000000 [ 243.686572] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 243.686572] GPR20: 0000000132dfdc50 000000000000000e 0000000000189375 0000000000000000 [ 243.686572] GPR24: 00007ffffa606ae0 0000000000000005 000001000c185490 000001000c172570 [ 243.686572] GPR28: 000001000c172990 000001000c184850 000001000c172e00 00007fffa4fedd98 [ 243.686683] NIP [00007fffa47d5ba4] 0x7fffa47d5ba4 [ 243.686691] LR [0000000000000000] 0x0 [ 243.686698] --- interrupt: 3000 [ 243.686708] INFO: task kworker/u16:1:24 blocked for more than 122 seconds. [ 243.686717] Not tainted 6.1.0-rc1 #1 [ 243.686724] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.686733] task:kworker/u16:1 state:D stack:0 pid:24 ppid:2 flags:0x00000800 [ 243.686747] Workqueue: events_unbound fsnotify_mark_destroy_workfn [ 243.686758] Call Trace: [ 243.686762] [c0000000166736e0] [c00000004fd91000] 0xc00000004fd91000 (unreliable) [ 243.686775] [c0000000166738d0] [c00000001001dec0] __switch_to+0x130/0x220 [ 243.686788] [c000000016673930] [c000000010f607b8] __schedule+0x1f8/0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Make intel_get_crtc_new_encoder() less oopsy The point of the WARN was to print something, not oops straight up. Currently that is precisely what happens if we can't find the connector for the crtc in the atomic state. Get the dev pointer from the atomic state instead of the potentially NULL encoder to avoid that. (cherry picked from commit 3b6692357f70498f617ea1b31a0378070a0acf1c)

In the Linux kernel, the following vulnerability has been resolved: kobject: Add sanity check for kset->kobj.ktype in kset_register() When I register a kset in the following way: static struct kset my_kset; kobject_set_name(&my_kset.kobj, "my_kset"); ret = kset_register(&my_kset); A null pointer dereference exception is occurred: [ 4453.568337] Unable to handle kernel NULL pointer dereference at \ virtual address 0000000000000028 ... ... [ 4453.810361] Call trace: [ 4453.813062] kobject_get_ownership+0xc/0x34 [ 4453.817493] kobject_add_internal+0x98/0x274 [ 4453.822005] kset_register+0x5c/0xb4 [ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset] ... ... Because I didn't initialize my_kset.kobj.ktype. According to the description in Documentation/core-api/kobject.rst: - A ktype is the type of object that embeds a kobject. Every structure that embeds a kobject needs a corresponding ktype. So add sanity check to make sure kset->kobj.ktype is not NULL.

In the Linux kernel, the following vulnerability has been resolved: FS: JFS: Fix null-ptr-deref Read in txBegin Syzkaller reported an issue where txBegin may be called on a superblock in a read-only mounted filesystem which leads to NULL pointer deref. This could be solved by checking if the filesystem is read-only before calling txBegin, and returning with appropiate error code.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus_core) Fix NULL pointer dereference Pass i2c_client to _pmbus_is_enabled to drop the assumption that a regulator device is passed in. This will fix the issue of a NULL pointer dereference when called from _pmbus_get_flags.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0), there is a special handling in order to use the correct counters, but, port_num is being passed down the stack without any change. Also, some functions assume that port_num >=1. As a result, the following oops can occur. BUG: unable to handle page fault for address: ffff89510294f1a8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 8 PID: 1382 Comm: devlink Tainted: G W 6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock+0xc/0x20 Call Trace: <TASK> mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib] do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib] mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib] ib_setup_device_attrs+0xf0/0x290 [ib_core] ib_register_device+0x3bb/0x510 [ib_core] ? atomic_notifier_chain_register+0x67/0x80 __mlx5_ib_add+0x2b/0x80 [mlx5_ib] mlx5r_probe+0xb8/0x150 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x3c/0x70 ? driver_sysfs_add+0x6b/0x90 really_probe+0xcd/0x380 __driver_probe_device+0x80/0x170 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 ? driver_allows_async_probing+0x60/0x60 ? driver_allows_async_probing+0x60/0x60 bus_for_each_drv+0x7b/0xc0 __device_attach+0xbc/0x200 bus_probe_device+0x87/0xa0 device_add+0x404/0x940 ? dev_set_name+0x53/0x70 __auxiliary_device_add+0x43/0x60 add_adev+0x99/0xe0 [mlx5_core] mlx5_attach_device+0xc8/0x120 [mlx5_core] mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core] devlink_reload+0x133/0x250 devlink_nl_cmd_reload+0x480/0x570 ? devlink_nl_pre_doit+0x44/0x2b0 genl_family_rcv_msg_doit.isra.0+0xc2/0x110 genl_rcv_msg+0x180/0x2b0 ? devlink_nl_cmd_region_read_dumpit+0x540/0x540 ? devlink_reload+0x250/0x250 ? devlink_put+0x50/0x50 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x237/0x490 sock_sendmsg+0x33/0x40 __sys_sendto+0x103/0x160 ? handle_mm_fault+0x10e/0x290 ? do_user_addr_fault+0x1c0/0x5f0 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fix it by setting port_num to 1 in order to get device status and remove unused variable.

In the Linux kernel, the following vulnerability has been resolved: spi: bcm-qspi: return error if neither hif_mspi nor mspi is available If neither a "hif_mspi" nor "mspi" resource is present, the driver will just early exit in probe but still return success. Apart from not doing anything meaningful, this would then also lead to a null pointer access on removal, as platform_get_drvdata() would return NULL, which it would then try to dereference when trying to unregister the spi master. Fix this by unconditionally calling devm_ioremap_resource(), as it can handle a NULL res and will then return a viable ERR_PTR() if we get one. The "return 0;" was previously a "goto qspi_resource_err;" where then ret was returned, but since ret was still initialized to 0 at this place this was a valid conversion in 63c5395bb7a9 ("spi: bcm-qspi: Fix use-after-free on unbind"). The issue was not introduced by this commit, only made more obvious.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Add null pointer check in gserial_resume Consider a case where gserial_disconnect has already cleared gser->ioport. And if a wakeup interrupt triggers afterwards, gserial_resume gets called, which will lead to accessing of gser->ioport and thus causing null pointer dereference.Add a null pointer check to prevent this. Added a static spinlock to prevent gser->ioport from becoming null after the newly added check.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Add null pointer check in gserial_suspend Consider a case where gserial_disconnect has already cleared gser->ioport. And if gserial_suspend gets called afterwards, it will lead to accessing of gser->ioport and thus causing null pointer dereference. Avoid this by adding a null pointer check. Added a static spinlock to prevent gser->ioport from becoming null after the newly added null pointer check.

In the Linux kernel, the following vulnerability has been resolved: ionic: catch failure from devlink_alloc Add a check for NULL on the alloc return. If devlink_alloc() fails and we try to use devlink_priv() on the NULL return, the kernel gets very unhappy and panics. With this fix, the driver load will still fail, but at least it won't panic the kernel.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: clean up skbs if ath9k_hif_usb_rx_stream() fails Syzkaller detected a memory leak of skbs in ath9k_hif_usb_rx_stream(). While processing skbs in ath9k_hif_usb_rx_stream(), the already allocated skbs in skb_pool are not freed if ath9k_hif_usb_rx_stream() fails. If we have an incorrect pkt_len or pkt_tag, the input skb is considered invalid and dropped. All the associated packets already in skb_pool should be dropped and freed. Added a comment describing this issue. The patch also makes remain_skb NULL after being processed so that it cannot be referenced after potential free. The initialization of hif_dev fields which are associated with remain_skb (rx_remain_len, rx_transfer_len and rx_pad_len) is moved after a new remain_skb is allocated. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix incomplete state save in rxe_requester If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many QPs on a fast node sending large messages to a slow node dropped packets are observed and the resent packets are corrupted because the dma struct was not restored. This patch fixes this behavior and allows the test cases to succeed.

In the Linux kernel, the following vulnerability has been resolved: modpost: fix off by one in is_executable_section() The > comparison should be >= to prevent an out of bounds array access.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Add lwtunnel encap size of all siblings in nexthop calculation In function rt6_nlmsg_size(), the length of nexthop is calculated by multipling the nexthop length of fib6_info and the number of siblings. However if the fib6_info has no lwtunnel but the siblings have lwtunnels, the nexthop length is less than it should be, and it will trigger a warning in inet6_rt_notify() as follows: WARNING: CPU: 0 PID: 6082 at net/ipv6/route.c:6180 inet6_rt_notify+0x120/0x130 ...... Call Trace: <TASK> fib6_add_rt2node+0x685/0xa30 fib6_add+0x96/0x1b0 ip6_route_add+0x50/0xd0 inet6_rtm_newroute+0x97/0xa0 rtnetlink_rcv_msg+0x156/0x3d0 netlink_rcv_skb+0x5a/0x110 netlink_unicast+0x246/0x350 netlink_sendmsg+0x250/0x4c0 sock_sendmsg+0x66/0x70 ___sys_sendmsg+0x7c/0xd0 __sys_sendmsg+0x5d/0xb0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc This bug can be reproduced by script: ip -6 addr add 2002::2/64 dev ens2 ip -6 route add 100::/64 via 2002::1 dev ens2 metric 100 for i in 10 20 30 40 50 60 70; do ip link add link ens2 name ipv_$i type ipvlan ip -6 addr add 2002::$i/64 dev ipv_$i ifconfig ipv_$i up done for i in 10 20 30 40 50 60; do ip -6 route append 100::/64 encap ip6 dst 2002::$i via 2002::1 dev ipv_$i metric 100 done ip -6 route append 100::/64 via 2002::1 dev ipv_70 metric 100 This patch fixes it by adding nexthop_len of every siblings using rt6_nh_nlmsg_size().