In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: Fix global-out-of-bounds bug in _rtl8812ae_phy_set_txpower_limit() There is a global-out-of-bounds reported by KASAN: BUG: KASAN: global-out-of-bounds in _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] Read of size 1 at addr ffffffffa0773c43 by task NetworkManager/411 CPU: 6 PID: 411 Comm: NetworkManager Tainted: G D 6.1.0-rc8+ #144 e15588508517267d37 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), Call Trace: <TASK> ... kasan_report+0xbb/0x1c0 _rtl8812ae_eq_n_byte.part.0+0x3d/0x84 [rtl8821ae] rtl8821ae_phy_bb_config.cold+0x346/0x641 [rtl8821ae] rtl8821ae_hw_init+0x1f5e/0x79b0 [rtl8821ae] ... </TASK> The root cause of the problem is that the comparison order of "prate_section" in _rtl8812ae_phy_set_txpower_limit() is wrong. The _rtl8812ae_eq_n_byte() is used to compare the first n bytes of the two strings from tail to head, which causes the problem. In the _rtl8812ae_phy_set_txpower_limit(), it was originally intended to meet this requirement by carefully designing the comparison order. For example, "pregulation" and "pbandwidth" are compared in order of length from small to large, first is 3 and last is 4. However, the comparison order of "prate_section" dose not obey such order requirement, therefore when "prate_section" is "HT", when comparing from tail to head, it will lead to access out of bounds in _rtl8812ae_eq_n_byte(). As mentioned above, the _rtl8812ae_eq_n_byte() has the same function as strcmp(), so just strcmp() is enough. Fix it by removing _rtl8812ae_eq_n_byte() and use strcmp() barely. Although it can be fixed by adjusting the comparison order of "prate_section", this may cause the value of "rate_section" to not be from 0 to 5. In addition, commit "21e4b0726dc6" not only moved driver from staging to regular tree, but also added setting txpower limit function during the driver config phase, so the problem was introduced by this commit.

In the Linux kernel, the following vulnerability has been resolved: selinux: Add boundary check in put_entry() Just like next_entry(), boundary check is necessary to prevent memory out-of-bound access.

In the Linux kernel, the following vulnerability has been resolved: capabilities: fix undefined behavior in bit shift for CAP_TO_MASK Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c cap_task_prctl+0x561/0x6f0 security_task_prctl+0x5a/0xb0 __x64_sys_prctl+0x61/0x8f0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate buffer length while parsing index indx_read is called when we have some NTFS directory operations that need more information from the index buffers. This adds a sanity check to make sure the returned index buffer length is legit, or we may have some out-of-bound memory accesses. [ 560.897595] BUG: KASAN: slab-out-of-bounds in hdr_find_e.isra.0+0x10c/0x320 [ 560.898321] Read of size 2 at addr ffff888009497238 by task exp/245 [ 560.898760] [ 560.899129] CPU: 0 PID: 245 Comm: exp Not tainted 6.0.0-rc6 #37 [ 560.899505] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 560.900170] Call Trace: [ 560.900407] <TASK> [ 560.900732] dump_stack_lvl+0x49/0x63 [ 560.901108] print_report.cold+0xf5/0x689 [ 560.901395] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.901716] kasan_report+0xa7/0x130 [ 560.901950] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.902208] __asan_load2+0x68/0x90 [ 560.902427] hdr_find_e.isra.0+0x10c/0x320 [ 560.902846] ? cmp_uints+0xe0/0xe0 [ 560.903363] ? cmp_sdh+0x90/0x90 [ 560.903883] ? ntfs_bread_run+0x190/0x190 [ 560.904196] ? rwsem_down_read_slowpath+0x750/0x750 [ 560.904969] ? ntfs_fix_post_read+0xe0/0x130 [ 560.905259] ? __kasan_check_write+0x14/0x20 [ 560.905599] ? up_read+0x1a/0x90 [ 560.905853] ? indx_read+0x22c/0x380 [ 560.906096] indx_find+0x2ef/0x470 [ 560.906352] ? indx_find_buffer+0x2d0/0x2d0 [ 560.906692] ? __kasan_kmalloc+0x88/0xb0 [ 560.906977] dir_search_u+0x196/0x2f0 [ 560.907220] ? ntfs_nls_to_utf16+0x450/0x450 [ 560.907464] ? __kasan_check_write+0x14/0x20 [ 560.907747] ? mutex_lock+0x8f/0xe0 [ 560.907970] ? __mutex_lock_slowpath+0x20/0x20 [ 560.908214] ? kmem_cache_alloc+0x143/0x4b0 [ 560.908459] ntfs_lookup+0xe0/0x100 [ 560.908788] __lookup_slow+0x116/0x220 [ 560.909050] ? lookup_fast+0x1b0/0x1b0 [ 560.909309] ? lookup_fast+0x13f/0x1b0 [ 560.909601] walk_component+0x187/0x230 [ 560.909944] link_path_walk.part.0+0x3f0/0x660 [ 560.910285] ? handle_lookup_down+0x90/0x90 [ 560.910618] ? path_init+0x642/0x6e0 [ 560.911084] ? percpu_counter_add_batch+0x6e/0xf0 [ 560.912559] ? __alloc_file+0x114/0x170 [ 560.913008] path_openat+0x19c/0x1d10 [ 560.913419] ? getname_flags+0x73/0x2b0 [ 560.913815] ? kasan_save_stack+0x3a/0x50 [ 560.914125] ? kasan_save_stack+0x26/0x50 [ 560.914542] ? __kasan_slab_alloc+0x6d/0x90 [ 560.914924] ? kmem_cache_alloc+0x143/0x4b0 [ 560.915339] ? getname_flags+0x73/0x2b0 [ 560.915647] ? getname+0x12/0x20 [ 560.916114] ? __x64_sys_open+0x4c/0x60 [ 560.916460] ? path_lookupat.isra.0+0x230/0x230 [ 560.916867] ? __isolate_free_page+0x2e0/0x2e0 [ 560.917194] do_filp_open+0x15c/0x1f0 [ 560.917448] ? may_open_dev+0x60/0x60 [ 560.917696] ? expand_files+0xa4/0x3a0 [ 560.917923] ? __kasan_check_write+0x14/0x20 [ 560.918185] ? _raw_spin_lock+0x88/0xdb [ 560.918409] ? _raw_spin_lock_irqsave+0x100/0x100 [ 560.918783] ? _find_next_bit+0x4a/0x130 [ 560.919026] ? _raw_spin_unlock+0x19/0x40 [ 560.919276] ? alloc_fd+0x14b/0x2d0 [ 560.919635] do_sys_openat2+0x32a/0x4b0 [ 560.920035] ? file_open_root+0x230/0x230 [ 560.920336] ? __rcu_read_unlock+0x5b/0x280 [ 560.920813] do_sys_open+0x99/0xf0 [ 560.921208] ? filp_open+0x60/0x60 [ 560.921482] ? exit_to_user_mode_prepare+0x49/0x180 [ 560.921867] __x64_sys_open+0x4c/0x60 [ 560.922128] do_syscall_64+0x3b/0x90 [ 560.922369] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.923030] RIP: 0033:0x7f7dff2e4469 [ 560.923681] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 560.924451] RSP: 002b:00007ffd41a210b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000002 [ 560.925168] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7dff2e4469 [ 560.925655] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Align upwards buffer size The hardware can support any image size WxH, with arbitrary W (image width) and H (image height) dimensions. Align upwards buffer size for both encoder and decoder. and leave the picture resolution unchanged. For decoder, the risk of memory out of bounds can be avoided. For both encoder and decoder, the driver will lift the limitation of resolution alignment. For example, the decoder can support jpeg whose resolution is 227x149 the encoder can support nv12 1080P, won't change it to 1920x1072.

In the Linux kernel, the following vulnerability has been resolved: can: dev: fix skb drop check In commit a6d190f8c767 ("can: skb: drop tx skb if in listen only mode") the priv->ctrlmode element is read even on virtual CAN interfaces that do not create the struct can_priv at startup. This out-of-bounds read may lead to CAN frame drops for virtual CAN interfaces like vcan and vxcan. This patch mainly reverts the original commit and adds a new helper for CAN interface drivers that provide the required information in struct can_priv. [mkl: patch pch_can, too]

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix reading strings from synthetic events The follow commands caused a crash: # cd /sys/kernel/tracing # echo 's:open char file[]' > dynamic_events # echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' > events/syscalls/sys_enter_openat/trigger' # echo 1 > events/synthetic/open/enable BOOM! The problem is that the synthetic event field "char file[]" will read the value given to it as a string without any memory checks to make sure the address is valid. The above example will pass in the user space address and the sythetic event code will happily call strlen() on it and then strscpy() where either one will cause an oops when accessing user space addresses. Use the helper functions from trace_kprobe and trace_eprobe that can read strings safely (and actually succeed when the address is from user space and the memory is mapped in). Now the above can show: packagekitd-1721 [000] ...2. 104.597170: open: file=/usr/lib/rpm/fileattrs/cmake.attr in:imjournal-978 [006] ...2. 104.599642: open: file=/var/lib/rsyslog/imjournal.state.tmp packagekitd-1721 [000] ...2. 104.626308: open: file=/usr/lib/rpm/fileattrs/debuginfo.attr

In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Fix out-of-bounds access Clip memory range to screen-buffer size to avoid out-of-bounds access in fbdev deferred I/O's damage handling. Fbdev's deferred I/O can only track pages. From the range of pages, the damage handler computes the clipping rectangle for the display update. If the fbdev screen buffer ends near the beginning of a page, that page could contain more scanlines. The damage handler would then track these non-existing scanlines as dirty and provoke an out-of-bounds access during the screen update. Hence, clip the maximum memory range to the size of the screen buffer. While at it, rename the variables min/max to min_off/max_off in drm_fb_helper_deferred_io(). This avoids confusion with the macros of the same name.

In the Linux kernel, the following vulnerability has been resolved: habanalabs/gaudi: fix shift out of bounds When validating NIC queues, queue offset calculation must be performed only for NIC queues.

In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from htab_lock_bucket() to userspace In __htab_map_lookup_and_delete_batch() if htab_lock_bucket() returns -EBUSY, it will go to next bucket. Going to next bucket may not only skip the elements in current bucket silently, but also incur out-of-bound memory access or expose kernel memory to userspace if current bucket_cnt is greater than bucket_size or zero. Fixing it by stopping batch operation and returning -EBUSY when htab_lock_bucket() fails, and the application can retry or skip the busy batch as needed.

In the Linux kernel, the following vulnerability has been resolved: clk: bcm: rpi: Prevent out-of-bounds access The while loop in raspberrypi_discover_clocks() relies on the assumption that the id of the last clock element is zero. Because this data comes from the Videocore firmware and it doesn't guarantuee such a behavior this could lead to out-of-bounds access. So fix this by providing a sentinel element.

In the Linux kernel, the following vulnerability has been resolved: i2c: ismt: Fix an out-of-bounds bug in ismt_access() When the driver does not check the data from the user, the variable 'data->block[0]' may be very large to cause an out-of-bounds bug. The following log can reveal it: [ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20 [ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE [ 33.996475] ================================================================== [ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b [ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485 [ 33.999450] Call Trace: [ 34.001849] memcpy+0x20/0x60 [ 34.002077] ismt_access.cold+0x374/0x214b [ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0 [ 34.004007] i2c_smbus_xfer+0x10a/0x390 [ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710 [ 34.005196] i2cdev_ioctl+0x5ec/0x74c Fix this bug by checking the size of 'data->block[0]' first.

In the Linux kernel, the following vulnerability has been resolved: bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO Precision markers need to be propagated whenever we have an ARG_CONST_* style argument, as the verifier cannot consider imprecise scalars to be equivalent for the purposes of states_equal check when such arguments refine the return value (in this case, set mem_size for PTR_TO_MEM). The resultant mem_size for the R0 is derived from the constant value, and if the verifier incorrectly prunes states considering them equivalent where such arguments exist (by seeing that both registers have reg->precise as false in regsafe), we can end up with invalid programs passing the verifier which can do access beyond what should have been the correct mem_size in that explored state. To show a concrete example of the problem: 0000000000000000 <prog>: 0: r2 = *(u32 *)(r1 + 80) 1: r1 = *(u32 *)(r1 + 76) 2: r3 = r1 3: r3 += 4 4: if r3 > r2 goto +18 <LBB5_5> 5: w2 = 0 6: *(u32 *)(r1 + 0) = r2 7: r1 = *(u32 *)(r1 + 0) 8: r2 = 1 9: if w1 == 0 goto +1 <LBB5_3> 10: r2 = -1 0000000000000058 <LBB5_3>: 11: r1 = 0 ll 13: r3 = 0 14: call bpf_ringbuf_reserve 15: if r0 == 0 goto +7 <LBB5_5> 16: r1 = r0 17: r1 += 16777215 18: w2 = 0 19: *(u8 *)(r1 + 0) = r2 20: r1 = r0 21: r2 = 0 22: call bpf_ringbuf_submit 00000000000000b8 <LBB5_5>: 23: w0 = 0 24: exit For the first case, the single line execution's exploration will prune the search at insn 14 for the branch insn 9's second leg as it will be verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will always be 0 so at runtime we don't get error for being greater than UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just sees reg->precise as false for both r2 registers in both states, hence considers them equal for purposes of states_equal. If we propagated precise markers using the backtracking support, we would use the precise marking to then ensure that old r2 (UINT_MAX) was within the new r2 (1) and this would never be true, so the verification would rightfully fail. The end result is that the out of bounds access at instruction 19 would be permitted without this fix. Note that reg->precise is always set to true when user does not have CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static or global functions)), hence this is only a problem when precision marks need to be explicitly propagated (i.e. privileged users with CAP_BPF). A simplified test case has been included in the next patch to prevent future regressions.

In the Linux kernel, the following vulnerability has been resolved: s390/cio: fix out-of-bounds access on cio_ignore free The channel-subsystem-driver scans for newly available devices whenever device-IDs are removed from the cio_ignore list using a command such as: echo free >/proc/cio_ignore Since an I/O device scan might interfer with running I/Os, commit 172da89ed0ea ("s390/cio: avoid excessive path-verification requests") introduced an optimization to exclude online devices from the scan. The newly added check for online devices incorrectly assumes that an I/O-subchannel's drvdata points to a struct io_subchannel_private. For devices that are bound to a non-default I/O subchannel driver, such as the vfio_ccw driver, this results in an out-of-bounds read access during each scan. Fix this by changing the scan logic to rely on a driver-independent online indication. For this we can use struct subchannel->config.ena, which is the driver's requested subchannel-enabled state. Since I/Os can only be started on enabled subchannels, this matches the intent of the original optimization of not scanning devices where I/O might be running.

In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: fix shift-out-of-bounds in check_special_flags UBSAN reported a shift-out-of-bounds warning: left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106 ubsan_epilogue+0xa/0x44 lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208 lib/ubsan.c:322 check_special_flags fs/binfmt_misc.c:241 [inline] create_entry fs/binfmt_misc.c:456 [inline] bm_register_write+0x9d3/0xa20 fs/binfmt_misc.c:654 vfs_write+0x11e/0x580 fs/read_write.c:582 ksys_write+0xcf/0x120 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x34/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4194e1 Since the type of Node's flags is unsigned long, we should define these macros with same type too.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix writes in read-only memory region This commit fixes a kernel oops because of a write in some read-only memory: [ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8 ..snip.. [ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP ..snip.. [ 9.269161] Call trace: [ 9.276271] __memcpy+0x5c/0x230 [ 9.278531] snprintf+0x58/0x80 [ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190 [ 9.284869] qcom_cpufreq_probe+0xc8/0x39c ..snip.. The following line defines a pointer that point to a char buffer stored in read-only memory: char *pvs_name = "speedXX-pvsXX-vXX"; This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the XX values get overridden by the qcom_cpufreq_krait_name_version function. Since the template is actually stored in read-only memory, when the function executes the following call we get an oops: snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", speed, pvs, pvs_ver); To fix this issue, we instead store the template name onto the stack by using the following syntax: char pvs_name_buffer[] = "speedXX-pvsXX-vXX"; Because the `pvs_name` needs to be able to be assigned to NULL, the template buffer is stored in the pvs_name_buffer and not under the pvs_name variable.

In the Linux kernel, the following vulnerability has been resolved: spmi: trace: fix stack-out-of-bound access in SPMI tracing functions trace_spmi_write_begin() and trace_spmi_read_end() both call memcpy() with a length of "len + 1". This leads to one extra byte being read beyond the end of the specified buffer. Fix this out-of-bound memory access by using a length of "len" instead. Here is a KASAN log showing the issue: BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234 Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314 ... Call trace: dump_backtrace+0x0/0x3e8 show_stack+0x2c/0x3c dump_stack_lvl+0xdc/0x11c print_address_description+0x74/0x384 kasan_report+0x188/0x268 kasan_check_range+0x270/0x2b0 memcpy+0x90/0xe8 trace_event_raw_event_spmi_read_end+0x1d0/0x234 spmi_read_cmd+0x294/0x3ac spmi_ext_register_readl+0x84/0x9c regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi] _regmap_raw_read+0x40c/0x754 regmap_raw_read+0x3a0/0x514 regmap_bulk_read+0x418/0x494 adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3] ... __arm64_sys_read+0x4c/0x60 invoke_syscall+0x80/0x218 el0_svc_common+0xec/0x1c8 ... addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame: adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3] this frame has 1 object: [32, 33) 'status' Memory state around the buggy address: ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00 ^ ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: dm raid: fix address sanitizer warning in raid_status There is this warning when using a kernel with the address sanitizer and running this testsuite: https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid ================================================================== BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid] Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319 CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9c print_address_description.constprop.0+0x1f/0x1e0 print_report.cold+0x55/0x244 kasan_report+0xc9/0x100 raid_status+0x1747/0x2820 [dm_raid] dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod] table_load+0x35c/0x630 [dm_mod] ctl_ioctl+0x411/0x630 [dm_mod] dm_ctl_ioctl+0xa/0x10 [dm_mod] __x64_sys_ioctl+0x12a/0x1a0 do_syscall_64+0x5b/0x80 The warning is caused by reading conf->max_nr_stripes in raid_status. The code in raid_status reads mddev->private, casts it to struct r5conf and reads the entry max_nr_stripes. However, if we have different raid type than 4/5/6, mddev->private doesn't point to struct r5conf; it may point to struct r0conf, struct r1conf, struct r10conf or struct mpconf. If we cast a pointer to one of these structs to struct r5conf, we will be reading invalid memory and KASAN warns about it. Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.

In the Linux kernel, the following vulnerability has been resolved: bpf: Don't use tnum_range on array range checking for poke descriptors Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which is based on a customized syzkaller: BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0 Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d The problem here is that a range of tnum_range(0, map->max_entries - 1) has limited ability to represent the concrete tight range with the tnum as the set of resulting states from value + mask can result in a superset of the actual intended range, and as such a tnum_in(range, reg->var_off) check may yield true when it shouldn't, for example tnum_range(0, 2) would result in 00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here represented by a less precise superset of {0, 1, 2, 3}. As the register is known const scalar, really just use the concrete reg->var_off.value for the upper index check.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) KASAN reports: [ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) [ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0 [ 4.683454][ T0] [ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1 [ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016 [ 4.703196][ T0] Call Trace: [ 4.706334][ T0] <TASK> [ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497) after converting the type of the first argument (@nr, bit number) of arch_test_bit() from `long` to `unsigned long`[0]. Under certain conditions (for example, when ACPI NUMA is disabled via command line), pxm_to_node() can return %NUMA_NO_NODE (-1). It is valid 'magic' number of NUMA node, but not valid bit number to use in bitops. node_online() eventually descends to test_bit() without checking for the input, assuming it's on caller side (which might be good for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads to an insane array index when calculating bit position in memory. For now, add an explicit check for @node being not %NUMA_NO_NODE before calling test_bit(). The actual logics didn't change here at all. [0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d

In the Linux kernel, the following vulnerability has been resolved: zonefs: fix zonefs_iomap_begin() for reads If a readahead is issued to a sequential zone file with an offset exactly equal to the current file size, the iomap type is set to IOMAP_UNWRITTEN, which will prevent an IO, but the iomap length is calculated as 0. This causes a WARN_ON() in iomap_iter(): [17309.548939] WARNING: CPU: 3 PID: 2137 at fs/iomap/iter.c:34 iomap_iter+0x9cf/0xe80 [...] [17309.650907] RIP: 0010:iomap_iter+0x9cf/0xe80 [...] [17309.754560] Call Trace: [17309.757078] <TASK> [17309.759240] ? lock_is_held_type+0xd8/0x130 [17309.763531] iomap_readahead+0x1a8/0x870 [17309.767550] ? iomap_read_folio+0x4c0/0x4c0 [17309.771817] ? lockdep_hardirqs_on_prepare+0x400/0x400 [17309.778848] ? lock_release+0x370/0x750 [17309.784462] ? folio_add_lru+0x217/0x3f0 [17309.790220] ? reacquire_held_locks+0x4e0/0x4e0 [17309.796543] read_pages+0x17d/0xb60 [17309.801854] ? folio_add_lru+0x238/0x3f0 [17309.807573] ? readahead_expand+0x5f0/0x5f0 [17309.813554] ? policy_node+0xb5/0x140 [17309.819018] page_cache_ra_unbounded+0x27d/0x450 [17309.825439] filemap_get_pages+0x500/0x1450 [17309.831444] ? filemap_add_folio+0x140/0x140 [17309.837519] ? lock_is_held_type+0xd8/0x130 [17309.843509] filemap_read+0x28c/0x9f0 [17309.848953] ? zonefs_file_read_iter+0x1ea/0x4d0 [zonefs] [17309.856162] ? trace_contention_end+0xd6/0x130 [17309.862416] ? __mutex_lock+0x221/0x1480 [17309.868151] ? zonefs_file_read_iter+0x166/0x4d0 [zonefs] [17309.875364] ? filemap_get_pages+0x1450/0x1450 [17309.881647] ? __mutex_unlock_slowpath+0x15e/0x620 [17309.888248] ? wait_for_completion_io_timeout+0x20/0x20 [17309.895231] ? lock_is_held_type+0xd8/0x130 [17309.901115] ? lock_is_held_type+0xd8/0x130 [17309.906934] zonefs_file_read_iter+0x356/0x4d0 [zonefs] [17309.913750] new_sync_read+0x2d8/0x520 [17309.919035] ? __x64_sys_lseek+0x1d0/0x1d0 Furthermore, this causes iomap_readahead() to loop forever as iomap_readahead_iter() always returns 0, making no progress. Fix this by treating reads after the file size as access to holes, setting the iomap type to IOMAP_HOLE, the iomap addr to IOMAP_NULL_ADDR and using the length argument as is for the iomap length. To simplify the code with this change, zonefs_iomap_begin() is split into the read variant, zonefs_read_iomap_begin() and zonefs_read_iomap_ops, and the write variant, zonefs_write_iomap_begin() and zonefs_write_iomap_ops.

In the Linux kernel, the following vulnerability has been resolved: fs: jfs: fix shift-out-of-bounds in dbDiscardAG This should be applied to most URSAN bugs found recently by syzbot, by guarding the dbMount. As syzbot feeding rubbish into the bmap descriptor.

In the Linux kernel, the following vulnerability has been resolved: crypto: arm64/poly1305 - fix a read out-of-bound A kasan error was reported during fuzzing: BUG: KASAN: slab-out-of-bounds in neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon] Read of size 4 at addr ffff0010e293f010 by task syz-executor.5/1646715 CPU: 4 PID: 1646715 Comm: syz-executor.5 Kdump: loaded Not tainted 5.10.0.aarch64 #1 Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.59 01/31/2019 Call trace: dump_backtrace+0x0/0x394 show_stack+0x34/0x4c arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x158/0x1e4 lib/dump_stack.c:118 print_address_description.constprop.0+0x68/0x204 mm/kasan/report.c:387 __kasan_report+0xe0/0x140 mm/kasan/report.c:547 kasan_report+0x44/0xe0 mm/kasan/report.c:564 check_memory_region_inline mm/kasan/generic.c:187 [inline] __asan_load4+0x94/0xd0 mm/kasan/generic.c:252 neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon] neon_poly1305_do_update+0x6c/0x15c [poly1305_neon] neon_poly1305_update+0x9c/0x1c4 [poly1305_neon] crypto_shash_update crypto/shash.c:131 [inline] shash_finup_unaligned+0x84/0x15c crypto/shash.c:179 crypto_shash_finup+0x8c/0x140 crypto/shash.c:193 shash_digest_unaligned+0xb8/0xe4 crypto/shash.c:201 crypto_shash_digest+0xa4/0xfc crypto/shash.c:217 crypto_shash_tfm_digest+0xb4/0x150 crypto/shash.c:229 essiv_skcipher_setkey+0x164/0x200 [essiv] crypto_skcipher_setkey+0xb0/0x160 crypto/skcipher.c:612 skcipher_setkey+0x3c/0x50 crypto/algif_skcipher.c:305 alg_setkey+0x114/0x2a0 crypto/af_alg.c:220 alg_setsockopt+0x19c/0x210 crypto/af_alg.c:253 __sys_setsockopt+0x190/0x2e0 net/socket.c:2123 __do_sys_setsockopt net/socket.c:2134 [inline] __se_sys_setsockopt net/socket.c:2131 [inline] __arm64_sys_setsockopt+0x78/0x94 net/socket.c:2131 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall+0x64/0x100 arch/arm64/kernel/syscall.c:48 el0_svc_common.constprop.0+0x220/0x230 arch/arm64/kernel/syscall.c:155 do_el0_svc+0xb4/0xd4 arch/arm64/kernel/syscall.c:217 el0_svc+0x24/0x3c arch/arm64/kernel/entry-common.c:353 el0_sync_handler+0x160/0x164 arch/arm64/kernel/entry-common.c:369 el0_sync+0x160/0x180 arch/arm64/kernel/entry.S:683 This error can be reproduced by the following code compiled as ko on a system with kasan enabled: #include <linux/module.h> #include <linux/crypto.h> #include <crypto/hash.h> #include <crypto/poly1305.h> char test_data[] = "\x00\x01\x02\x03\x04\x05\x06\x07" "\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" "\x10\x11\x12\x13\x14\x15\x16\x17" "\x18\x19\x1a\x1b\x1c\x1d\x1e"; int init(void) { struct crypto_shash *tfm = NULL; char *data = NULL, *out = NULL; tfm = crypto_alloc_shash("poly1305", 0, 0); data = kmalloc(POLY1305_KEY_SIZE - 1, GFP_KERNEL); out = kmalloc(POLY1305_DIGEST_SIZE, GFP_KERNEL); memcpy(data, test_data, POLY1305_KEY_SIZE - 1); crypto_shash_tfm_digest(tfm, data, POLY1305_KEY_SIZE - 1, out); kfree(data); kfree(out); return 0; } void deinit(void) { } module_init(init) module_exit(deinit) MODULE_LICENSE("GPL"); The root cause of the bug sits in neon_poly1305_blocks. The logic neon_poly1305_blocks() performed is that if it was called with both s[] and r[] uninitialized, it will first try to initialize them with the data from the first "block" that it believed to be 32 bytes in length. First 16 bytes are used as the key and the next 16 bytes for s[]. This would lead to the aforementioned read out-of-bound. However, after calling poly1305_init_arch(), only 16 bytes were deducted from the input and s[] is initialized yet again with the following 16 bytes. The second initialization of s[] is certainly redundent which indicates that the first initialization should be for r[] only. This patch fixes the issue by calling poly1305_init_arm64() instead o ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dlm: fix plock invalid read This patch fixes an invalid read showed by KASAN. A unlock will allocate a "struct plock_op" and a followed send_op() will append it to a global send_list data structure. In some cases a followed dev_read() moves it to recv_list and dev_write() will cast it to "struct plock_xop" and access fields which are only available in those structures. At this point an invalid read happens by accessing those fields. To fix this issue the "callback" field is moved to "struct plock_op" to indicate that a cast to "plock_xop" is allowed and does the additional "plock_xop" handling if set. Example of the KASAN output which showed the invalid read: [ 2064.296453] ================================================================== [ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm] [ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484 [ 2064.308168] [ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9 [ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 2064.311618] Call Trace: [ 2064.312218] dump_stack_lvl+0x56/0x7b [ 2064.313150] print_address_description.constprop.8+0x21/0x150 [ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.316595] kasan_report.cold.14+0x7f/0x11b [ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.318687] dev_write+0x52b/0x5a0 [dlm] [ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm] [ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10 [ 2064.321926] vfs_write+0x17e/0x930 [ 2064.322769] ? __fget_light+0x1aa/0x220 [ 2064.323753] ksys_write+0xf1/0x1c0 [ 2064.324548] ? __ia32_sys_read+0xb0/0xb0 [ 2064.325464] do_syscall_64+0x3a/0x80 [ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.327606] RIP: 0033:0x7f807e4ba96f [ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48 [ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f [ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010 [ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001 [ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80 [ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001 [ 2064.342857] [ 2064.343226] Allocated by task 12438: [ 2064.344057] kasan_save_stack+0x1c/0x40 [ 2064.345079] __kasan_kmalloc+0x84/0xa0 [ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220 [ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm] [ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0 [ 2064.351070] fcntl_setlk+0x281/0xbc0 [ 2064.352879] do_fcntl+0x5e4/0xfe0 [ 2064.354657] __x64_sys_fcntl+0x11f/0x170 [ 2064.356550] do_syscall_64+0x3a/0x80 [ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.360745] [ 2064.361511] Last potentially related work creation: [ 2064.363957] kasan_save_stack+0x1c/0x40 [ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.368100] call_rcu+0x11b/0xf70 [ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.372404] receive_from_sock+0x290/0x770 [dlm] [ 2064.374607] process_recv_sockets+0x32/0x40 [dlm] [ 2064.377290] process_one_work+0x9a8/0x16e0 [ 2064.379357] worker_thread+0x87/0xbf0 [ 2064.381188] kthread+0x3ac/0x490 [ 2064.383460] ret_from_fork+0x22/0x30 [ 2064.385588] [ 2064.386518] Second to last potentially related work creation: [ 2064.389219] kasan_save_stack+0x1c/0x40 [ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.393303] call_rcu+0x11b/0xf70 [ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.397694] receive_from_sock+0x290/0x770 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: Prevent out of bounds read in mvneta_config_rss() The pp->indir[0] value comes from the user. It is passed to: if (cpu_online(pp->rxq_def)) inside the mvneta_percpu_elect() function. It needs bounds checkeding to ensure that it is not beyond the end of the cpu bitmap.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type Accessing enums using integer would result in array out of bounds access on platforms like aarch64 where sizeof(long) is 8 compared to enum size which is 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to ensure that it is within the bitmap. drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()'

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type. Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes. Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data. In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end. In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry() The "fsp->location" variable comes from user via ethtool_get_rxnfc(). Check that it is valid to prevent an out of bounds read.

In the Linux kernel, the following vulnerability has been resolved: exfat: check if cluster num is valid Syzbot reported slab-out-of-bounds read in exfat_clear_bitmap. This was triggered by reproducer calling truncute with size 0, which causes the following trace: BUG: KASAN: slab-out-of-bounds in exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174 Read of size 8 at addr ffff888115aa9508 by task syz-executor251/365 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack_lvl+0x1e2/0x24b lib/dump_stack.c:118 print_address_description+0x81/0x3c0 mm/kasan/report.c:233 __kasan_report mm/kasan/report.c:419 [inline] kasan_report+0x1a4/0x1f0 mm/kasan/report.c:436 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:309 exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174 exfat_free_cluster+0x25a/0x4a0 fs/exfat/fatent.c:181 __exfat_truncate+0x99e/0xe00 fs/exfat/file.c:217 exfat_truncate+0x11b/0x4f0 fs/exfat/file.c:243 exfat_setattr+0xa03/0xd40 fs/exfat/file.c:339 notify_change+0xb76/0xe10 fs/attr.c:336 do_truncate+0x1ea/0x2d0 fs/open.c:65 Move the is_valid_cluster() helper from fatent.c to a common header to make it reusable in other *.c files. And add is_valid_cluster() to validate if cluster number is within valid range in exfat_clear_bitmap() and exfat_set_bitmap().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Avoid cross-chip syncing of VLAN filtering Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx.

In the Linux kernel, the following vulnerability has been resolved: module: fix [e_shstrndx].sh_size=0 OOB access It is trivial to craft a module to trigger OOB access in this line: if (info->secstrings[strhdr->sh_size - 1] != '\0') { BUG: unable to handle page fault for address: ffffc90000aa0fff PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:load_module+0x19b/0x2391 [rebased patch onto modules-next]

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: fix a bug of accessing array out of bounds When error occurs in parsing jpeg, the slot isn't acquired yet, it may be the default value MXC_MAX_SLOTS. If the driver access the slot using the incorrect slot number, it will access array out of bounds. The result is the driver will change num_domains, which follows slot_data in struct mxc_jpeg_dev. Then the driver won't detach the pm domain at rmmod, which will lead to kernel panic when trying to insmod again.

In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Avoid out of bounds access when parsing _CPC data If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/

In the Linux kernel, the following vulnerability has been resolved: drm/dp: Fix OOB read when handling Post Cursor2 register The link_status array was not large enough to read the Adjust Request Post Cursor2 register, so remove the common helper function to avoid an OOB read, found with a -Warray-bounds build: drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor': drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds] 59 | return link_status[r - DP_LANE0_1_STATUS]; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status' 147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE], | ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Replace the only user of the helper with an open-coded fetch and decode, similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c.

In the Linux kernel, the following vulnerability has been resolved: um: Fix out-of-bounds read in LDT setup syscall_stub_data() expects the data_count parameter to be the number of longs, not bytes. ================================================================== BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0 Read of size 128 at addr 000000006411f6f0 by task swapper/1 CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18 Call Trace: show_stack.cold+0x166/0x2a7 __dump_stack+0x3a/0x43 dump_stack_lvl+0x1f/0x27 print_report.cold+0xdb/0xf81 kasan_report+0x119/0x1f0 kasan_check_range+0x3a3/0x440 memcpy+0x52/0x140 syscall_stub_data+0x70/0xe0 write_ldt_entry+0xac/0x190 init_new_ldt+0x515/0x960 init_new_context+0x2c4/0x4d0 mm_init.constprop.0+0x5ed/0x760 mm_alloc+0x118/0x170 0x60033f48 do_one_initcall+0x1d7/0x860 0x60003e7b kernel_init+0x6e/0x3d4 new_thread_handler+0x1e7/0x2c0 The buggy address belongs to stack of task swapper/1 and is located at offset 64 in frame: init_new_ldt+0x0/0x960 This frame has 2 objects: [32, 40) 'addr' [64, 80) 'desc' ==================================================================

In the Linux kernel, the following vulnerability has been resolved: dm raid: fix accesses beyond end of raid member array On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled).

In the Linux kernel, the following vulnerability has been resolved: net/tls: fix slab-out-of-bounds bug in decrypt_internal The memory size of tls_ctx->rx.iv for AES128-CCM is 12 setting in tls_set_sw_offload(). The return value of crypto_aead_ivsize() for "ccm(aes)" is 16. So memcpy() require 16 bytes from 12 bytes memory space will trigger slab-out-of-bounds bug as following: ================================================================== BUG: KASAN: slab-out-of-bounds in decrypt_internal+0x385/0xc40 [tls] Read of size 16 at addr ffff888114e84e60 by task tls/10911 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x5e/0x5db ? decrypt_internal+0x385/0xc40 [tls] kasan_report+0xab/0x120 ? decrypt_internal+0x385/0xc40 [tls] kasan_check_range+0xf9/0x1e0 memcpy+0x20/0x60 decrypt_internal+0x385/0xc40 [tls] ? tls_get_rec+0x2e0/0x2e0 [tls] ? process_rx_list+0x1a5/0x420 [tls] ? tls_setup_from_iter.constprop.0+0x2e0/0x2e0 [tls] decrypt_skb_update+0x9d/0x400 [tls] tls_sw_recvmsg+0x3c8/0xb50 [tls] Allocated by task 10911: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 tls_set_sw_offload+0x2eb/0xa20 [tls] tls_setsockopt+0x68c/0x700 [tls] __sys_setsockopt+0xfe/0x1b0 Replace the crypto_aead_ivsize() with prot->iv_size + prot->salt_size when memcpy() iv value in TLS_1_3_VERSION scenario.

In the Linux kernel, the following vulnerability has been resolved: usb: isp1760: Fix out-of-bounds array access Running the driver through kasan gives an interesting splat: BUG: KASAN: global-out-of-bounds in isp1760_register+0x180/0x70c Read of size 20 at addr f1db2e64 by task swapper/0/1 (...) isp1760_register from isp1760_plat_probe+0x1d8/0x220 (...) This happens because the loop reading the regmap fields for the different ISP1760 variants look like this: for (i = 0; i < HC_FIELD_MAX; i++) { ... } Meaning it expects the arrays to be at least HC_FIELD_MAX - 1 long. However the arrays isp1760_hc_reg_fields[], isp1763_hc_reg_fields[], isp1763_hc_volatile_ranges[] and isp1763_dc_volatile_ranges[] are dynamically sized during compilation. Fix this by putting an empty assignment to the [HC_FIELD_MAX] and [DC_FIELD_MAX] array member at the end of each array. This will make the array one member longer than it needs to be, but avoids the risk of overwriting whatever is inside [HC_FIELD_MAX - 1] and is simple and intuitive to read. Also add comments explaining what is going on.

In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number

In the Linux kernel, the following vulnerability has been resolved: iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380 Read of size 4 at addr ffffffffc00e4658 by task cat/278 Call Trace: afe4404_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4404_channel_leds+0x18/0xffffffffffffe9c0 This issue can be reproduce by singe command: $ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw The array size of afe4404_channel_leds and afe4404_channel_offdacs are less than channels, so access with chan->address cause OOB read in afe4404_[read|write]_raw. Fix it by moving access before use them.

In the Linux kernel, the following vulnerability has been resolved: ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match: fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961 fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753 inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874 Separate nexthop objects are mutually exclusive with the legacy multipath spec. Fix fib_nh_match to return if the config for the to be deleted route contains a multipath spec while the fib_info is using a nexthop object.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rx-macro: fix accessing compander for aux AUX interpolator does not have compander, so check before accessing compander data for this. Without this checkan array of out bounds access will be made in comp_enabled[] array.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive/spapr: correct bitmap allocation size kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: va-macro: fix accessing array out of bounds for enum type Accessing enums using integer would result in array out of bounds access on platforms like aarch64 where sizeof(long) is 8 compared to enum size which is 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: ASoC: cs35l41: Fix an out-of-bounds access in otp_packed_element_t The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN to report a shift-out-of-bounds warning in the cs35l41_otp_unpack() since the last entry in the array will result in GENMASK(-1, 0). UBSAN reports this problem: UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] ? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c] i2c_device_probe+0x252/0x2b0

An issue was discovered in the Linux kernel before 6.2. The ntfs3 subsystem does not properly check for correctness during disk reads, leading to an out-of-bounds read in ntfs_set_ea in fs/ntfs3/xattr.c.

In the Linux kernel, the following vulnerability has been resolved: bpf: Use VM_MAP instead of VM_ALLOC for ringbuf After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages after mapping"), non-VM_ALLOC mappings will be marked as accessible in __get_vm_area_node() when KASAN is enabled. But now the flag for ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access after vmap() returns. Because the ringbuf area is created by mapping allocated pages, so use VM_MAP instead. After the change, info in /proc/vmallocinfo also changes from [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmalloc user to [start]-[end] 24576 ringbuf_map_alloc+0x171/0x290 vmap user

An issue was discovered in the Linux kernel before 6.0.11. Missing offset validation in drivers/net/wireless/microchip/wilc1000/hif.c in the WILC1000 wireless driver can trigger an out-of-bounds read when parsing a Robust Security Network (RSN) information element from a Netlink packet.

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Reject out of bounds values in snd_soc_put_volsw() We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range.