In the Linux kernel, the following vulnerability has been resolved: spi: Fix simplification of devm_spi_register_controller This reverts commit 59ebbe40fb51 ("spi: simplify devm_spi_register_controller"). If devm_add_action() fails in devm_add_action_or_reset(), devm_spi_unregister() will be called, it decreases the refcount of 'ctlr->dev' to 0, then it will cause uaf in the drivers that calling spi_put_controller() in error path.

In the Linux kernel, the following vulnerability has been resolved: ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed If the initialization fails in calling addrconf_init_net(), devconf_all is the pointer that has been released. Then ip6mr_sk_done() is called to release the net, accessing devconf->mc_forwarding directly causes invalid pointer access. The process is as follows: setup_net() ops_init() addrconf_init_net() all = kmemdup(...) ---> alloc "all" ... net->ipv6.devconf_all = all; __addrconf_sysctl_register() ---> failed ... kfree(all); ---> ipv6.devconf_all invalid ... ops_exit_list() ... ip6mr_sk_done() devconf = net->ipv6.devconf_all; //devconf is invalid pointer if (!devconf || !atomic_read(&devconf->mc_forwarding)) The following is the Call Trace information: BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0 Read of size 4 at addr ffff888075508e88 by task ip/14554 Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 kasan_check_range+0x35/0x1b0 ip6mr_sk_done+0x112/0x3a0 rawv6_close+0x48/0x70 inet_release+0x109/0x230 inet6_release+0x4c/0x70 sock_release+0x87/0x1b0 igmp6_net_exit+0x6b/0x170 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f7963322547 </TASK> Allocated by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc_node_track_caller+0x4a/0xb0 kmemdup+0x28/0x60 addrconf_init_net+0x1be/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 addrconf_init_net+0x623/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() We got a syzkaller problem because of aarch64 alignment fault if KFENCE enabled. When the size from user bpf program is an odd number, like 399, 407, etc, it will cause the struct skb_shared_info's unaligned access. As seen below: BUG: KFENCE: use-after-free read in __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 Use-after-free read at 0xffff6254fffac077 (in kfence-#213): __lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline] arch_atomic_add arch/arm64/include/asm/atomic.h:28 [inline] arch_atomic_inc include/linux/atomic-arch-fallback.h:270 [inline] atomic_inc include/asm-generic/atomic-instrumented.h:241 [inline] __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 skb_clone+0xf4/0x214 net/core/skbuff.c:1481 ____bpf_clone_redirect net/core/filter.c:2433 [inline] bpf_clone_redirect+0x78/0x1c0 net/core/filter.c:2420 bpf_prog_d3839dd9068ceb51+0x80/0x330 bpf_dispatcher_nop_func include/linux/bpf.h:728 [inline] bpf_test_run+0x3c0/0x6c0 net/bpf/test_run.c:53 bpf_prog_test_run_skb+0x638/0xa7c net/bpf/test_run.c:594 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 kfence-#213: 0xffff6254fffac000-0xffff6254fffac196, size=407, cache=kmalloc-512 allocated by task 15074 on cpu 0 at 1342.585390s: kmalloc include/linux/slab.h:568 [inline] kzalloc include/linux/slab.h:675 [inline] bpf_test_init.isra.0+0xac/0x290 net/bpf/test_run.c:191 bpf_prog_test_run_skb+0x11c/0xa7c net/bpf/test_run.c:512 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 __arm64_sys_bpf+0x50/0x60 kernel/bpf/syscall.c:4381 To fix the problem, we adjust @size so that (@size + @hearoom) is a multiple of SMP_CACHE_BYTES. So we make sure the struct skb_shared_info is aligned to a cache line.

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3 fix use-after-free at workaround 2 BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xac cdns3_wa2_remove_old_request() { ... kfree(priv_req->request.buf); cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ^^^ use after free ... } cdns3_gadget_ep_free_request() free the space pointed by priv_req, but priv_req is used in the following list_del_init(). This patch move list_del_init() before cdns3_gadget_ep_free_request().

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps There could be a potential use-after-free case in tcpm_register_source_caps(). This could happen when: * new (say invalid) source caps are advertised * the existing source caps are unregistered * tcpm_register_source_caps() returns with an error as usb_power_delivery_register_capabilities() fails This causes port->partner_source_caps to hold on to the now freed source caps. Reset port->partner_source_caps value to NULL after unregistering existing source caps.

In the Linux kernel, the following vulnerability has been resolved: usbnet: Run unregister_netdev() before unbind() again Commit 2c9d6c2b871d ("usbnet: run unbind() before unregister_netdev()") sought to fix a use-after-free on disconnect of USB Ethernet adapters. It turns out that a different fix is necessary to address the issue: https://lore.kernel.org/netdev/18b3541e5372bc9b9fc733d422f4e698c089077c.1650177997.git.lukas@wunner.de/ So the commit was not necessary. The commit made binding and unbinding of USB Ethernet asymmetrical: Before, usbnet_probe() first invoked the ->bind() callback and then register_netdev(). usbnet_disconnect() mirrored that by first invoking unregister_netdev() and then ->unbind(). Since the commit, the order in usbnet_disconnect() is reversed and no longer mirrors usbnet_probe(). One consequence is that a PHY disconnected (and stopped) in ->unbind() is afterwards stopped once more by unregister_netdev() as it closes the netdev before unregistering. That necessitates a contortion in ->stop() because the PHY may only be stopped if it hasn't already been disconnected. Reverting the commit allows making the call to phy_stop() unconditional in ->stop().

In the Linux kernel, the following vulnerability has been resolved: cachefiles: Set object to close if ondemand_id < 0 in copen If copen is maliciously called in the user mode, it may delete the request corresponding to the random id. And the request may have not been read yet. Note that when the object is set to reopen, the open request will be done with the still reopen state in above case. As a result, the request corresponding to this object is always skipped in select_req function, so the read request is never completed and blocks other process. Fix this issue by simply set object to close if its id < 0 in copen.

In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-resv: check if the new fence is really later Previously when we added a fence to a dma_resv object we always assumed the the newer than all the existing fences. With Jason's work to add an UAPI to explicit export/import that's not necessary the case any more. So without this check we would allow userspace to force the kernel into an use after free error. Since the change is very small and defensive it's probably a good idea to backport this to stable kernels as well just in case others are using the dma_resv object in the same way.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a potential use-after-free in bpf_link_free() After commit 1a80dbcb2dba, bpf_link can be freed by link->ops->dealloc_deferred, but the code still tests and uses link->ops->dealloc afterward, which leads to a use-after-free as reported by syzbot. Actually, one of them should be sufficient, so just call one of them instead of both. Also add a WARN_ON() in case of any problematic implementation.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix use-after-free in snd_soc_exit() KASAN reports a use-after-free: BUG: KASAN: use-after-free in device_del+0xb5b/0xc60 Read of size 8 at addr ffff888008655050 by task rmmod/387 CPU: 2 PID: 387 Comm: rmmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl+0x79/0x9a print_report+0x17f/0x47b kasan_report+0xbb/0xf0 device_del+0xb5b/0xc60 platform_device_del.part.0+0x24/0x200 platform_device_unregister+0x2e/0x40 snd_soc_exit+0xa/0x22 [snd_soc_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail, but its ret is ignored, which makes soc_dummy_dev unregistered twice. snd_soc_init() snd_soc_util_init() platform_device_register_simple(soc_dummy_dev) platform_driver_register() # fail platform_device_unregister(soc_dummy_dev) platform_driver_register() # success ... snd_soc_exit() snd_soc_util_exit() # soc_dummy_dev will be unregistered for second time To fix it, handle error and stop snd_soc_init() when util_init() fail. Also clean debugfs when util_init() or driver_register() fail.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: remove requests from xarray during flushing requests Even with CACHEFILES_DEAD set, we can still read the requests, so in the following concurrency the request may be used after it has been freed: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_ondemand_init_object cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read // close dev fd cachefiles_flush_reqs complete(&REQ_A->done) kfree(REQ_A) xa_lock(&cache->reqs); cachefiles_ondemand_select_req req->msg.opcode != CACHEFILES_OP_READ // req use-after-free !!! xa_unlock(&cache->reqs); xa_destroy(&cache->reqs) Hence remove requests from cache->reqs when flushing them to avoid accessing freed requests.

In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix a UAF bug on the error path of probing When the driver fails in snd_card_register() at probe time, it will free the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug. The following log can reveal it: [ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] [ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0 [ 50.729530] Call Trace: [ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] Fix this by adding usb_kill_urb() before usb_free_urb().

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix use-after-free during unregister In the following code within firmware_upload_unregister(), the call to device_unregister() could result in the dev_release function freeing the fw_upload_priv structure before it is dereferenced for the call to module_put(). This bug was found by the kernel test robot using CONFIG_KASAN while running the firmware selftests. device_unregister(&fw_sysfs->dev); module_put(fw_upload_priv->module); The problem is fixed by copying fw_upload_priv->module to a local variable for use when calling device_unregister().

In the Linux kernel, the following vulnerability has been resolved: cachefiles: flush all requests after setting CACHEFILES_DEAD In ondemand mode, when the daemon is processing an open request, if the kernel flags the cache as CACHEFILES_DEAD, the cachefiles_daemon_write() will always return -EIO, so the daemon can't pass the copen to the kernel. Then the kernel process that is waiting for the copen triggers a hung_task. Since the DEAD state is irreversible, it can only be exited by closing /dev/cachefiles. Therefore, after calling cachefiles_io_error() to mark the cache as CACHEFILES_DEAD, if in ondemand mode, flush all requests to avoid the above hungtask. We may still be able to read some of the cached data before closing the fd of /dev/cachefiles. Note that this relies on the patch that adds reference counting to the req, otherwise it may UAF.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix potential UAF by revoke of fence registers CI has been sporadically reporting the following issue triggered by igt@i915_selftest@live@hangcheck on ADL-P and similar machines: <6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence ... <6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <3> [414.070354] Unable to pin Y-tiled fence; err:-4 <3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active)) ... <4>[ 609.603992] ------------[ cut here ]------------ <2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301! <4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1 <4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 <4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915] <4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915] ... <4>[ 609.604271] Call Trace: <4>[ 609.604273] <TASK> ... <4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915] <4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915] <4>[ 609.604977] force_unbind+0x24/0xa0 [i915] <4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915] <4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915] <4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915] <4>[ 609.605440] process_scheduled_works+0x351/0x690 ... In the past, there were similar failures reported by CI from other IGT tests, observed on other platforms. Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for idleness of vma->active via fence_update(). That commit introduced vma->fence->active in order for the fence_update() to be able to wait selectively on that one instead of vma->active since only idleness of fence registers was needed. But then, another commit 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") replaced the call to fence_update() in i915_vma_revoke_fence() with only fence_write(), and also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front. No justification was provided on why we might then expect idleness of vma->fence->active without first waiting on it. The issue can be potentially caused by a race among revocation of fence registers on one side and sequential execution of signal callbacks invoked on completion of a request that was using them on the other, still processed in parallel to revocation of those fence registers. Fix it by waiting for idleness of vma->fence->active in i915_vma_revoke_fence(). (cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)

In the Linux kernel, the following vulnerability has been resolved: tcp: Use refcount_inc_not_zero() in tcp_twsk_unique(). Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique() with nice analysis. Since commit ec94c2696f0b ("tcp/dccp: avoid one atomic operation for timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's sk_refcnt after putting it into ehash and releasing the bucket lock. Thus, there is a small race window where other threads could try to reuse the port during connect() and call sock_hold() in tcp_twsk_unique() for the TIME-WAIT socket with zero refcnt. If that happens, the refcnt taken by tcp_twsk_unique() is overwritten and sock_put() will cause underflow, triggering a real use-after-free somewhere else. To avoid the use-after-free, we need to use refcount_inc_not_zero() in tcp_twsk_unique() and give up on reusing the port if it returns false. [0]: refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110 CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1 Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023 RIP: 0010:refcount_warn_saturate+0xe5/0x110 Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8 RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027 RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0 RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0 R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84 R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0 FS: 00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <TASK> ? refcount_warn_saturate+0xe5/0x110 ? __warn+0x81/0x130 ? refcount_warn_saturate+0xe5/0x110 ? report_bug+0x171/0x1a0 ? refcount_warn_saturate+0xe5/0x110 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? refcount_warn_saturate+0xe5/0x110 tcp_twsk_unique+0x186/0x190 __inet_check_established+0x176/0x2d0 __inet_hash_connect+0x74/0x7d0 ? __pfx___inet_check_established+0x10/0x10 tcp_v4_connect+0x278/0x530 __inet_stream_connect+0x10f/0x3d0 inet_stream_connect+0x3a/0x60 __sys_connect+0xa8/0xd0 __x64_sys_connect+0x18/0x20 do_syscall_64+0x83/0x170 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7f62c11a885d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003 RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0 R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: greybus: Fix use-after-free bug in gb_interface_release due to race condition. In gb_interface_create, &intf->mode_switch_completion is bound with gb_interface_mode_switch_work. Then it will be started by gb_interface_request_mode_switch. Here is the relevant code. if (!queue_work(system_long_wq, &intf->mode_switch_work)) { ... } If we call gb_interface_release to make cleanup, there may be an unfinished work. This function will call kfree to free the object "intf". However, if gb_interface_mode_switch_work is scheduled to run after kfree, it may cause use-after-free error as gb_interface_mode_switch_work will use the object "intf". The possible execution flow that may lead to the issue is as follows: CPU0 CPU1 | gb_interface_create | gb_interface_request_mode_switch gb_interface_release | kfree(intf) (free) | | gb_interface_mode_switch_work | mutex_lock(&intf->mutex) (use) Fix it by canceling the work before kfree.

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix use-after-free on source server when doing inter-server copy Use-after-free occurred when the laundromat tried to free expired cpntf_state entry on the s2s_cp_stateids list after inter-server copy completed. The sc_cp_list that the expired copy state was inserted on was already freed. When COPY completes, the Linux client normally sends LOCKU(lock_state x), FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server. The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state from the s2s_cp_stateids list before freeing the lock state's stid. However, sometimes the CLOSE was sent before the FREE_STATEID request. When this happens, the nfsd4_close_open_stateid call from nfsd4_close frees all lock states on its st_locks list without cleaning up the copy state on the sc_cp_list list. When the time the FREE_STATEID arrives the server returns BAD_STATEID since the lock state was freed. This causes the use-after-free error to occur when the laundromat tries to free the expired cpntf_state. This patch adds a call to nfs4_free_cpntf_statelist in nfsd4_close_open_stateid to clean up the copy state before calling free_ol_stateid_reaplist to free the lock state's stid on the reaplist.

In the Linux kernel, the following vulnerability has been resolved: 9p: add missing locking around taking dentry fid list Fix a use-after-free on dentry's d_fsdata fid list when a thread looks up a fid through dentry while another thread unlinks it: UAF thread: refcount_t: addition on 0; use-after-free. p9_fid_get linux/./include/net/9p/client.h:262 v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129 v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181 v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314 v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400 vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248 Freed by: p9_fid_destroy (inlined) p9_client_clunk+0xb0/0xe0 linux/net/9p/client.c:1456 p9_fid_put linux/./include/net/9p/client.h:278 v9fs_dentry_release+0xb5/0x140 linux/fs/9p/vfs_dentry.c:55 v9fs_remove+0x38f/0x620 linux/fs/9p/vfs_inode.c:518 vfs_unlink+0x29a/0x810 linux/fs/namei.c:4335 The problem is that d_fsdata was not accessed under d_lock, because d_release() normally is only called once the dentry is otherwise no longer accessible but since we also call it explicitly in v9fs_remove that lock is required: move the hlist out of the dentry under lock then unref its fids once they are no longer accessible.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Avoid unnecessary destruction of file_ida file_ida is allocated during cdev open and is freed accordingly during cdev release. This sequence is guaranteed by driver file operations. Therefore, there is no need to destroy an already empty file_ida when the WQ cdev is removed. Worse, ida_free() in cdev release may happen after destruction of file_ida per WQ cdev. This can lead to accessing an id in file_ida after it has been destroyed, resulting in a kernel panic. Remove ida_destroy(&file_ida) to address these issues.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix UAF for cq async event The refcount of CQ is not protected by locks. When CQ asynchronous events and CQ destruction are concurrent, CQ may have been released, which will cause UAF. Use the xa_lock() to protect the CQ refcount.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: fix use-after-free issue Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c

In the Linux kernel, the following vulnerability has been resolved: sctp: handle the error returned from sctp_auth_asoc_init_active_key When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inline] sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863 sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 This patch is to fix it by not replacing the sh_key when it returns errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key(). For sctp_auth_set_active_key(), old active_key_id will be set back to asoc->active_key_id when the same thing happens.

In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace: <TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Avoid use-after-free on suspend/resume hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx().

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails When scpi probe fails, at any point, we need to ensure that the scpi_info is not set and will remain NULL until the probe succeeds. If it is not taken care, then it could result use-after-free as the value is exported via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc() but freed when the probe fails.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not allow CHAIN_ID to refer to another table When doing lookups for chains on the same batch by using its ID, a chain from a different table can be used. If a rule is added to a table but refers to a chain in a different table, it will be linked to the chain in table2, but would have expressions referring to objects in table1. Then, when table1 is removed, the rule will not be removed as its linked to a chain in table2. When expressions in the rule are processed or removed, that will lead to a use-after-free. When looking for chains by ID, use the table that was used for the lookup by name, and only return chains belonging to that same table.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free due to race with dev replace While loading a zone's info during creation of a block group, we can race with a device replace operation and then trigger a use-after-free on the device that was just replaced (source device of the replace operation). This happens because at btrfs_load_zone_info() we extract a device from the chunk map into a local variable and then use the device while not under the protection of the device replace rwsem. So if there's a device replace operation happening when we extract the device and that device is the source of the replace operation, we will trigger a use-after-free if before we finish using the device the replace operation finishes and frees the device. Fix this by enlarging the critical section under the protection of the device replace rwsem so that all uses of the device are done inside the critical section.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

In the Linux kernel, the following vulnerability has been resolved: bfq: Update cgroup information before merging bio When the process is migrated to a different cgroup (or in case of writeback just starts submitting bios associated with a different cgroup) bfq_merge_bio() can operate with stale cgroup information in bic. Thus the bio can be merged to a request from a different cgroup or it can result in merging of bfqqs for different cgroups or bfqqs of already dead cgroups and causing possible use-after-free issues. Fix the problem by updating cgroup information in bfq_merge_bio().

In the Linux kernel, the following vulnerability has been resolved: drivers:md:fix a potential use-after-free bug In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function.

In the Linux kernel, the following vulnerability has been resolved: cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read() We got the following issue in a fuzz test of randomly issuing the restore command: ================================================================== BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60 Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963 CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564 Call Trace: kasan_report+0x93/0xc0 cachefiles_ondemand_daemon_read+0xb41/0xb60 vfs_read+0x169/0xb50 ksys_read+0xf5/0x1e0 Allocated by task 116: kmem_cache_alloc+0x140/0x3a0 cachefiles_lookup_cookie+0x140/0xcd0 fscache_cookie_state_machine+0x43c/0x1230 [...] Freed by task 792: kmem_cache_free+0xfe/0x390 cachefiles_put_object+0x241/0x480 fscache_cookie_state_machine+0x5c8/0x1230 [...] ================================================================== Following is the process that triggers the issue: mount | daemon_thread1 | daemon_thread2 ------------------------------------------------------------ cachefiles_withdraw_cookie cachefiles_ondemand_clean_object(object) cachefiles_ondemand_send_req REQ_A = kzalloc(sizeof(*req) + data_len) wait_for_completion(&REQ_A->done) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req msg->object_id = req->object->ondemand->ondemand_id ------ restore ------ cachefiles_ondemand_restore xas_for_each(&xas, req, ULONG_MAX) xas_set_mark(&xas, CACHEFILES_REQ_NEW) cachefiles_daemon_read cachefiles_ondemand_daemon_read REQ_A = cachefiles_ondemand_select_req copy_to_user(_buffer, msg, n) xa_erase(&cache->reqs, id) complete(&REQ_A->done) ------ close(fd) ------ cachefiles_ondemand_fd_release cachefiles_put_object cachefiles_put_object kmem_cache_free(cachefiles_object_jar, object) REQ_A->object->ondemand->ondemand_id // object UAF !!! When we see the request within xa_lock, req->object must not have been freed yet, so grab the reference count of object before xa_unlock to avoid the above issue.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of timer for log writer thread Patch series "nilfs2: fix log writer related issues". This bug fix series covers three nilfs2 log writer-related issues, including a timer use-after-free issue and potential deadlock issue on unmount, and a potential freeze issue in event synchronization found during their analysis. Details are described in each commit log. This patch (of 3): A use-after-free issue has been reported regarding the timer sc_timer on the nilfs_sc_info structure. The problem is that even though it is used to wake up a sleeping log writer thread, sc_timer is not shut down until the nilfs_sc_info structure is about to be freed, and is used regardless of the thread's lifetime. Fix this issue by limiting the use of sc_timer only while the log writer thread is alive.

In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release.

In the Linux kernel, the following vulnerability has been resolved: rapidio: fix possible UAF when kfifo_alloc() fails If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free priv. But priv is still in the chdev->file_list, then list traversal may cause UAF. This fixes the following smatch warning: drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list

In the Linux kernel, the following vulnerability has been resolved: watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger When the cpu5wdt module is removing, the origin code uses del_timer() to de-activate the timer. If the timer handler is running, del_timer() could not stop it and will return directly. If the port region is released by release_region() and then the timer handler cpu5wdt_trigger() calls outb() to write into the region that is released, the use-after-free bug will happen. Change del_timer() to timer_shutdown_sync() in order that the timer handler could be finished before the port region is released.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix possible use-after-free issue in ftrace_location() KASAN reports a bug: BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d0 init_module_from_file+0xd2/0x130 __x64_sys_finit_module+0x306/0x440 do_syscall_64+0x68/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause is that, in lookup_rec(), ftrace record of some address is being searched in ftrace pages of some module, but those ftrace pages at the same time is being freed in ftrace_release_mod() as the corresponding module is being deleted: CPU1 | CPU2 register_kprobes() { | delete_module() { check_kprobe_address_safe() { | arch_check_ftrace_location() { | ftrace_location() { | lookup_rec() // USE! | ftrace_release_mod() // Free! To fix this issue: 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range(); 2. Use ftrace_location_range() instead of lookup_rec() in ftrace_location(); 3. Call synchronize_rcu() before freeing any ftrace pages both in ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'") will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq() can free bfqq first, and then call bic_set_bfqq(), which will cause uaf. Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().

In the Linux kernel, the following vulnerability has been resolved: android: binder: stop saving a pointer to the VMA Do not record a pointer to a VMA outside of the mmap_lock for later use. This is unsafe and there are a number of failure paths *after* the recorded VMA pointer may be freed during setup. There is no callback to the driver to clear the saved pointer from generic mm code. Furthermore, the VMA pointer may become stale if any number of VMA operations end up freeing the VMA so saving it was fragile to being with. Instead, change the binder_alloc struct to record the start address of the VMA and use vma_lookup() to get the vma when needed. Add lockdep mmap_lock checks on updates to the vma pointer to ensure the lock is held and depend on that lock for synchronization of readers and writers - which was already the case anyways, so the smp_wmb()/smp_rmb() was not necessary. [akpm@linux-foundation.org: fix drivers/android/binder_alloc_selftest.c]

In the Linux kernel, the following vulnerability has been resolved: ima: Fix use-after-free on a dentry's dname.name ->d_name.name can change on rename and the earlier value can be freed; there are conditions sufficient to stabilize it (->d_lock on dentry, ->d_lock on its parent, ->i_rwsem exclusive on the parent's inode, rename_lock), but none of those are met at any of the sites. Take a stable snapshot of the name instead.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one.

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix use-after-free in hsci KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove() The function mpt3sas_transport_port_remove() called in _scsih_expander_node_remove() frees the port field of the sas_expander structure, leading to the following use-after-free splat from KASAN when the ioc_info() call following that function is executed (e.g. when doing rmmod of the driver module): [ 3479.371167] ================================================================== [ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531 [ 3479.393524] [ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436 [ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021 [ 3479.409263] Call Trace: [ 3479.411743] <TASK> [ 3479.413875] dump_stack_lvl+0x45/0x59 [ 3479.417582] print_address_description.constprop.0+0x1f/0x120 [ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.429469] kasan_report.cold+0x83/0xdf [ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas] [ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas] [ 3479.465529] ? down_write+0xde/0x150 [ 3479.470746] ? up_write+0x14d/0x460 [ 3479.475840] ? kernfs_find_ns+0x137/0x310 [ 3479.481438] pci_device_remove+0x65/0x110 [ 3479.487013] __device_release_driver+0x316/0x680 [ 3479.493180] driver_detach+0x1ec/0x2d0 [ 3479.498499] bus_remove_driver+0xe7/0x2d0 [ 3479.504081] pci_unregister_driver+0x26/0x250 [ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas] [ 3479.516144] __x64_sys_delete_module+0x2fd/0x510 [ 3479.522315] ? free_module+0xaa0/0xaa0 [ 3479.527593] ? __cond_resched+0x1c/0x90 [ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70 [ 3479.546161] ? trace_hardirqs_on+0x1c/0x110 [ 3479.551828] do_syscall_64+0x35/0x80 [ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3479.563402] RIP: 0033:0x7f1fc482483b ... [ 3479.943087] ================================================================== Fix this by introducing the local variable port_id to store the port ID value before executing mpt3sas_transport_port_remove(). This local variable is then used in the call to ioc_info() instead of dereferencing the freed port structure.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus).

In the Linux kernel, the following vulnerability has been resolved: dm: fix use-after-free in dm_cleanup_zoned_dev() dm_cleanup_zoned_dev() uses queue, so it must be called before blk_cleanup_disk() starts its killing: blk_cleanup_disk->blk_cleanup_queue()->kobject_put()->blk_release_queue()-> ->...RCU...->blk_free_queue_rcu()->kmem_cache_free() Otherwise, RCU callback may be executed first and dm_cleanup_zoned_dev() will touch free'd memory: BUG: KASAN: use-after-free in dm_cleanup_zoned_dev+0x33/0xd0 Read of size 8 at addr ffff88805ac6e430 by task dmsetup/681 CPU: 4 PID: 681 Comm: dmsetup Not tainted 5.17.0-rc2+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x150 ? dm_cleanup_zoned_dev+0x33/0xd0 kasan_report.cold+0x7f/0x11b ? dm_cleanup_zoned_dev+0x33/0xd0 dm_cleanup_zoned_dev+0x33/0xd0 __dm_destroy+0x26a/0x400 ? dm_blk_ioctl+0x230/0x230 ? up_write+0xd8/0x270 dev_remove+0x156/0x1d0 ctl_ioctl+0x269/0x530 ? table_clear+0x140/0x140 ? lock_release+0xb2/0x750 ? remove_all+0x40/0x40 ? rcu_read_lock_sched_held+0x12/0x70 ? lock_downgrade+0x3c0/0x3c0 ? rcu_read_lock_sched_held+0x12/0x70 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb9/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fb6dfa95c27

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcmu: Fix possible page UAF tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release().