A NULL pointer dereference was found in the Linux kernel's KVM when dirty ring logging is enabled without an active vCPU context. An unprivileged local attacker on the host may use this flaw to cause a kernel oops condition and thus a denial of service by issuing a KVM_XEN_HVM_SET_ATTR ioctl. This flaw affects Linux kernel versions prior to 5.17-rc1.

In the Linux kernel, the following vulnerability has been resolved: rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check endpoint is valid before dereferencing it When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors.

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: protect device queue against concurrent access In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path.

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length If the host sends an H2CData command with an invalid DATAL, the kernel may crash in nvmet_tcp_build_pdu_iovec(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Call trace: process_one_work+0x174/0x3c8 worker_thread+0x2d0/0x3e8 kthread+0x104/0x110 Fix the bug by raising a fatal error if DATAL isn't coherent with the packet size. Also, the PDU length should never exceed the MAXH2CDATA parameter which has been communicated to the host in nvmet_tcp_handle_icreq().

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: Check IRQ data before use In case the leaf driver wants to use IRQ polling (irq = 0) and IIR register shows that an interrupt happened in the 8250 hardware the IRQ data can be NULL. In such a case we need to skip the wake event as we came to this path from the timer interrupt and quite likely system is already awake. Without this fix we have got an Oops: serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A ... BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:serial8250_handle_irq+0x7c/0x240 Call Trace: ? serial8250_handle_irq+0x7c/0x240 ? __pfx_serial8250_timeout+0x10/0x10

In the Linux kernel, the following vulnerability has been resolved: net: rds: Fix possible NULL-pointer dereference In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists before dereferencing it as rdma_set_service_type() argument Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a debugfs null pointer error [WHY & HOW] Check whether get_subvp_en() callback exists before calling it.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix an NULL dereference bug The issue here is when this is called from ntfs_load_attr_list(). The "size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow on a 64bit systems but on 32bit systems the "+ 1023" can overflow and the result is zero. This means that the kmalloc will succeed by returning the ZERO_SIZE_PTR and then the memcpy() will crash with an Oops on the next line.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that.

In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Fix legacy IPoIB due to wrong number of queues The cited commit creates child PKEY interfaces over netlink will multiple tx and rx queues, but some devices doesn't support more than 1 tx and 1 rx queues. This causes to a crash when traffic is sent over the PKEY interface due to the parent having a single queue but the child having multiple queues. This patch fixes the number of queues to 1 for legacy IPoIB at the earliest possible point in time. BUG: kernel NULL pointer dereference, address: 000000000000036b PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0xcb/0x450 Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a 01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b RSP: 0018:ffff88822acbbab8 EFLAGS: 00010202 RAX: 0000000000000070 RBX: ffff8881c28e3e00 RCX: 00000000064f8dae RDX: 00000000064f8dad RSI: 0000000000000a20 RDI: 0000000000030d00 RBP: 0000000000000a20 R08: ffff8882f5d30d00 R09: ffff888104032f40 R10: ffff88810fade828 R11: 736f6d6570736575 R12: ffff88810081c000 R13: 00000000000002fb R14: ffffffff817fc865 R15: 0000000000000000 FS: 00007f9324ff9700(0000) GS:ffff8882f5d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036b CR3: 00000001125af004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_clone+0x55/0xd0 ip6_finish_output2+0x3fe/0x690 ip6_finish_output+0xfa/0x310 ip6_send_skb+0x1e/0x60 udp_v6_send_skb+0x1e5/0x420 udpv6_sendmsg+0xb3c/0xe60 ? ip_mc_finish_output+0x180/0x180 ? __switch_to_asm+0x3a/0x60 ? __switch_to_asm+0x34/0x60 sock_sendmsg+0x33/0x40 __sys_sendto+0x103/0x160 ? _copy_to_user+0x21/0x30 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_ts64+0x49/0xe0 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f9374f1ed14 Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b RSP: 002b:00007f9324ff7bd0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9324ff7cc8 RCX: 00007f9374f1ed14 RDX: 00000000000002fb RSI: 00007f93000052f0 RDI: 0000000000000030 RBP: 0000000000000000 R08: 00007f9324ff7d40 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 000000012a05f200 R14: 0000000000000001 R15: 00007f9374d57bdc </TASK>

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool In practice the driver should never send more commands than are allocated to a queue's event pool. In the unlikely event that this happens, the code asserts a BUG_ON, and in the case that the kernel is not configured to crash on panic returns a junk event pointer from the empty event list causing things to spiral from there. This BUG_ON is a historical artifact of the ibmvfc driver first being upstreamed, and it is well known now that the use of BUG_ON is bad practice except in the most unrecoverable scenario. There is nothing about this scenario that prevents the driver from recovering and carrying on. Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL pointer in the case of an empty event pool. Update all call sites to ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate failure or recovery action.

In the Linux kernel, the following vulnerability has been resolved: drm/panel: fix a possible null pointer dereference In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Do not unset preset when cleaning up codec Several functions that take part in codec's initialization and removal are re-used by ASoC codec drivers implementations. Drivers mimic the behavior of hda_codec_driver_probe/remove() found in sound/pci/hda/hda_bind.c with their component->probe/remove() instead. One of the reasons for that is the expectation of snd_hda_codec_device_new() to receive a valid pointer to an instance of struct snd_card. This expectation can be met only once sound card components probing commences. As ASoC sound card may be unbound without codec device being actually removed from the system, unsetting ->preset in snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load scenario causing null-ptr-deref. Preset is assigned only once, during device/driver matching whereas ASoC codec driver's module reloading may occur several times throughout the lifetime of an audio stack.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix some null pointer dereference issues in ice_ptp.c devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: gsmi: fix null-deref in gsmi_get_variable We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference at hibernate During hibernate sequence the source context might not have a clk_mgr. So don't use it to look for DML2 support.

In the Linux kernel, the following vulnerability has been resolved: mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath() As commit 18365225f044 ("hwpoison, memcg: forcibly uncharge LRU pages"), hwpoison will forcibly uncharg a LRU hwpoisoned page, the folio_memcg could be NULl, then, mem_cgroup_track_foreign_dirty_slowpath() could occurs a NULL pointer dereference, let's do not record the foreign writebacks for folio memcg is null in mem_cgroup_track_foreign_dirty() to fix it.

In the Linux kernel, the following vulnerability has been resolved: devlink: rate: Unset parent pointer in devl_rate_nodes_destroy The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: tty: vcc: Add check for kstrdup() in vcc_probe() Add check for the return value of kstrdup() and return the error, if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: HID: betop: check shape of output reports betopff_init() only checks the total sum of the report counts for each report field to be at least 4, but hid_betopff_play() expects 4 report fields. A device advertising an output report with one field and 4 report counts would pass the check but crash the kernel with a NULL pointer dereference in hid_betopff_play().

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Set all reserved memblocks on Node#0 at initialization After commit 61167ad5fecdea ("mm: pass nid to reserve_bootmem_region()") we get a panic if DEFERRED_STRUCT_PAGE_INIT is enabled: [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000002b82, era == 90000000040e3f28, ra == 90000000040e3f18 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0+ #733 [ 0.000000] pc 90000000040e3f28 ra 90000000040e3f18 tp 90000000046f4000 sp 90000000046f7c90 [ 0.000000] a0 0000000000000001 a1 0000000000200000 a2 0000000000000040 a3 90000000046f7ca0 [ 0.000000] a4 90000000046f7ca4 a5 0000000000000000 a6 90000000046f7c38 a7 0000000000000000 [ 0.000000] t0 0000000000000002 t1 9000000004b00ac8 t2 90000000040e3f18 t3 90000000040f0800 [ 0.000000] t4 00000000000f0000 t5 80000000ffffe07e t6 0000000000000003 t7 900000047fff5e20 [ 0.000000] t8 aaaaaaaaaaaaaaab u0 0000000000000018 s9 0000000000000000 s0 fffffefffe000000 [ 0.000000] s1 0000000000000000 s2 0000000000000080 s3 0000000000000040 s4 0000000000000000 [ 0.000000] s5 0000000000000000 s6 fffffefffe000000 s7 900000000470b740 s8 9000000004ad4000 [ 0.000000] ra: 90000000040e3f18 reserve_bootmem_region+0xec/0x21c [ 0.000000] ERA: 90000000040e3f28 reserve_bootmem_region+0xfc/0x21c [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010800 [PIL] (IS=11 ECode=1 EsubCode=0) [ 0.000000] BADV: 0000000000002b82 [ 0.000000] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 0000000000000000 9000000002eb5430 0000003a00000020 90000000045ccd00 [ 0.000000] 900000000470e000 90000000002c1918 0000000000000000 9000000004110780 [ 0.000000] 00000000fe6c0000 0000000480000000 9000000004b4e368 9000000004110748 [ 0.000000] 0000000000000000 900000000421ca84 9000000004620000 9000000004564970 [ 0.000000] 90000000046f7d78 9000000002cc9f70 90000000002c1918 900000000470e000 [ 0.000000] 9000000004564970 90000000040bc0e0 90000000046f7d78 0000000000000000 [ 0.000000] 0000000000004000 90000000045ccd00 0000000000000000 90000000002c1918 [ 0.000000] 90000000002c1900 900000000470b700 9000000004b4df78 9000000004620000 [ 0.000000] 90000000046200a8 90000000046200a8 0000000000000000 9000000004218b2c [ 0.000000] 9000000004270008 0000000000000001 0000000000000000 90000000045ccd00 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000040e3f28>] reserve_bootmem_region+0xfc/0x21c [ 0.000000] [<900000000421ca84>] memblock_free_all+0x114/0x350 [ 0.000000] [<9000000004218b2c>] mm_core_init+0x138/0x3cc [ 0.000000] [<9000000004200e38>] start_kernel+0x488/0x7a4 [ 0.000000] [<90000000040df0d8>] kernel_entry+0xd8/0xdc [ 0.000000] [ 0.000000] Code: 02eb21ad 00410f4c 380c31ac <262b818d> 6800b70d 02c1c196 0015001c 57fe4bb1 260002cd The reason is early memblock_reserve() in memblock_init() set node id to MAX_NUMNODES, making NODE_DATA(nid) a NULL dereference in the call chain reserve_bootmem_region() -> init_reserved_page(). After memblock_init(), those late calls of memblock_reserve() operate on subregions of memblock .memory regions. As a result, these reserved regions will be set to the correct node at the first iteration of memmap_init_reserved_pages(). So set all reserved memblocks on Node#0 at initialization can avoid this panic.

In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Don't attempt to resume the ports before they exist This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered.

In the Linux kernel, the following vulnerability has been resolved: power: supply: Fix null pointer dereference in smb2_probe devm_kasprintf and devm_kzalloc return a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: apparmor: avoid crash when parsed profile name is empty When processing a packed profile in unpack_profile() described like "profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}" a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: <TASK> ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment "a ns name without a following profile is allowed" inside. AFAICS, nothing can prevent unpacked "name" to be in form like ":samba-dcerpcd" - it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length needs to be aligned with block size Before calling add partition or resize partition, there is no check on whether the length is aligned with the logical block size. If the logical block size of the disk is larger than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the read command is smaller than the logical block size.If integrity data is supported, this will also result in a null pointer dereference when calling bio_integrity_free.

In the Linux kernel, the following vulnerability has been resolved: net: wangxun: fix kernel panic due to null pointer When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic.

In the Linux kernel, the following vulnerability has been resolved: hid: cp2112: Fix duplicate workqueue initialization Previously the cp2112 driver called INIT_DELAYED_WORK within cp2112_gpio_irq_startup, resulting in duplicate initilizations of the workqueue on subsequent IRQ startups following an initial request. This resulted in a warning in set_work_data in workqueue.c, as well as a rare NULL dereference within process_one_work in workqueue.c. Initialize the workqueue within _probe instead.

In the Linux kernel, the following vulnerability has been resolved: Add exception protection processing for vd in axi_chan_handle_err function Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]---

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: fix calls to page_pool_get_stats Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_s ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tracing: Have trace_event_file have ref counters The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: enable all safety features by default In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features.

In the Linux kernel, the following vulnerability has been resolved: acpi: Fix suspend with Xen PV Commit f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") missed one code path accessing real_mode_header, leading to dereferencing NULL when suspending the system under Xen: [ 348.284004] PM: suspend entry (deep) [ 348.289532] Filesystems sync: 0.005 seconds [ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 348.292457] OOM killer disabled. [ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug) [ 348.749228] PM: suspend devices took 0.352 seconds [ 348.769713] ACPI: EC: interrupt blocked [ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 348.816080] #PF: supervisor read access in kernel mode [ 348.816081] #PF: error_code(0x0000) - not-present page [ 348.816083] PGD 0 P4D 0 [ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1 [ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022 [ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20 Fix that by adding an optional acpi callback allowing to skip setting the wakeup address, as in the Xen PV case this will be handled by the hypervisor anyway.

In the Linux kernel, the following vulnerability has been resolved: media: hantro: Check whether reset op is defined before use The i.MX8MM/N/P does not define the .reset op since reset of the VPU is done by genpd. Check whether the .reset op is defined before calling it to avoid NULL pointer dereference. Note that the Fixes tag is set to the commit which removed the reset op from i.MX8M Hantro G2 implementation, this is because before this commit all the implementations did define the .reset op.

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: lt8912b: Fix crash on bridge detach The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000 [0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_connector_cleanup+0x78/0x2d4 [drm] lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] sp : ffff800082ed3a90 x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000 x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122 x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000 x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8 x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038 x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48 x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: drm_connector_cleanup+0x78/0x2d4 [drm] lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] drm_bridge_detach+0x44/0x84 [drm] drm_encoder_cleanup+0x40/0xb8 [drm] drmm_encoder_alloc_release+0x1c/0x30 [drm] drm_managed_release+0xac/0x148 [drm] drm_dev_put.part.0+0x88/0xb8 [drm] devm_drm_dev_init_release+0x14/0x24 [drm] devm_action_release+0x14/0x20 release_nodes+0x5c/0x90 devres_release_all+0x8c/0xe0 device_unbind_cleanup+0x18/0x68 device_release_driver_internal+0x208/0x23c driver_detach+0x4c/0x94 bus_remove_driver+0x70/0xf4 driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 tidss_platform_driver_exit+0x18/0xb2c [tidss] __arm64_sys_delete_module+0x1a0/0x2b4 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x60/0x10c do_el0_svc_compat+0x1c/0x40 el0_svc_compat+0x40/0xac el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420)

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix null pointer deref when receiving skb during sock creation The panic below is observed when receiving ICMP packets with secmark set while an ICMP raw socket is being created. SK_CTX(sk)->label is updated in apparmor_socket_post_create(), but the packet is delivered to the socket before that, causing the null pointer dereference. Drop the packet if label context is not set. BUG: kernel NULL pointer dereference, address: 000000000000004c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020 RIP: 0010:aa_label_next_confined+0xb/0x40 Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2 RSP: 0018:ffffa92940003b08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002 R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? aa_label_next_confined+0xb/0x40 apparmor_secmark_check+0xec/0x330 security_sock_rcv_skb+0x35/0x50 sk_filter_trim_cap+0x47/0x250 sock_queue_rcv_skb_reason+0x20/0x60 raw_rcv+0x13c/0x210 raw_local_deliver+0x1f3/0x250 ip_protocol_deliver_rcu+0x4f/0x2f0 ip_local_deliver_finish+0x76/0xa0 __netif_receive_skb_one_core+0x89/0xa0 netif_receive_skb+0x119/0x170 ? __netdev_alloc_skb+0x3d/0x140 vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] __napi_poll+0x28/0x1b0 net_rx_action+0x2a4/0x380 __do_softirq+0xd1/0x2c8 __irq_exit_rcu+0xbb/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 RIP: 0010:apparmor_socket_post_create+0xb/0x200 Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48 RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286 RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003 R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748 ? __pfx_apparmor_socket_post_create+0x10/0x10 security_socket_post_create+0x4b/0x80 __sock_create+0x176/0x1f0 __sys_socket+0x89/0x100 __x64_sys_socket+0x17/0x20 do_syscall_64+0x5d/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: team: fix null-ptr-deref when team device type is changed Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages sent from one TCP socket (s1) to actually egress from another TCP socket (s2): tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg tcp_bpf_send_verdict(s1) // __SK_REDIRECT case tcp_bpf_sendmsg_redir(s2) tcp_bpf_push_locked(s2) tcp_bpf_push(s2) tcp_rate_check_app_limited(s2) // expects tcp_sock tcp_sendmsg_locked(s2) // ditto There is a hard-coded assumption in the call-chain, that the egress socket (s2) is a TCP socket. However in commit 122e6c79efe1 ("sock_map: Update sock type checks for UDP") we have enabled redirects to non-TCP sockets. This was done for the sake of BPF sk_skb programs. There was no indention to support sk_msg send-to-egress use case. As a result, attempts to send-to-egress through a non-TCP socket lead to a crash due to invalid downcast from sock to tcp_sock: BUG: kernel NULL pointer dereference, address: 000000000000002f ... Call Trace: <TASK> ? show_regs+0x60/0x70 ? __die+0x1f/0x70 ? page_fault_oops+0x80/0x160 ? do_user_addr_fault+0x2d7/0x800 ? rcu_is_watching+0x11/0x50 ? exc_page_fault+0x70/0x1c0 ? asm_exc_page_fault+0x27/0x30 ? tcp_tso_segs+0x14/0xa0 tcp_write_xmit+0x67/0xce0 __tcp_push_pending_frames+0x32/0xf0 tcp_push+0x107/0x140 tcp_sendmsg_locked+0x99f/0xbb0 tcp_bpf_push+0x19d/0x3a0 tcp_bpf_sendmsg_redir+0x55/0xd0 tcp_bpf_send_verdict+0x407/0x550 tcp_bpf_sendmsg+0x1a1/0x390 inet_sendmsg+0x6a/0x70 sock_sendmsg+0x9d/0xc0 ? sockfd_lookup_light+0x12/0x80 __sys_sendto+0x10e/0x160 ? syscall_enter_from_user_mode+0x20/0x60 ? __this_cpu_preempt_check+0x13/0x20 ? lockdep_hardirqs_on+0x82/0x110 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg program to prevent the crash. When attempted, user will receive an EACCES error from send/sendto/sendmsg() syscall.

The mac80211 subsystem in the Linux kernel before 5.12.13, when a device supporting only 5 GHz is used, allows attackers to cause a denial of service (NULL pointer dereference in the radiotap parser) by injecting a frame with 802.11a rates.

In the Linux kernel, the following vulnerability has been resolved: smb: server: split ksmbd_rdma_stop_listening() out of ksmbd_rdma_destroy() We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()! Otherwise already existing connections try to use smb_direct_wq as a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check if hubbub is NULL in debugfs/amdgpu_dm_capabilities HUBBUB structure is not initialized on DCE hardware, so check if it is NULL to avoid null dereference while accessing amdgpu_dm_capabilities file in debugfs.

In the Linux kernel, the following vulnerability has been resolved: igb: Fix NULL pointer dereference in ethtool loopback test The igb driver currently causes a NULL pointer dereference when executing the ethtool loopback test. This occurs because there is no associated q_vector for the test ring when it is set up, as interrupts are typically not added to the test rings. Since commit 5ef44b3cb43b removed the napi_id assignment in __xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it. Therefore, simply use 0 as the last parameter.