In the Linux kernel, the following vulnerability has been resolved: ice: always check VF VSI pointer values The ice_get_vf_vsi function can return NULL in some cases, such as if handling messages during a reset where the VSI is being removed and recreated. Several places throughout the driver do not bother to check whether this VSI pointer is valid. Static analysis tools maybe report issues because they detect paths where a potentially NULL pointer could be dereferenced. Fix this by checking the return value of ice_get_vf_vsi everywhere.

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493860 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] <TASK> [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt] Fix this by checking whether the 'info->netdev' is a null pointer first.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Don't unregister on shutdown Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path.

In the Linux kernel, the following vulnerability has been resolved: md: Don't set mddev private to NULL in raid0 pers->free In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mddev->private to new_pers and then runs old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free. The new raid can't work anymore. It will panic when dereference mddev->private because of NULL pointer dereference. It can panic like this: [63010.814972] kernel BUG at drivers/md/raid10.c:928! [63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1 [63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020 [63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10] [63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246 [63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000 [63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800 [63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000 [63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200 [63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003 [63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000 [63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0 [63010.927363] Call Trace: [63010.929822] ? bio_reset+0xe/0x40 [63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10] [63010.938629] raid10_sync_request+0x756/0x1610 [raid10] [63010.943770] md_do_sync.cold+0x3e4/0x94c [63010.947698] md_thread+0xab/0x160 [63010.951024] ? md_write_inc+0x50/0x50 [63010.954688] kthread+0x149/0x170 [63010.957923] ? set_kthread_struct+0x40/0x40 [63010.962107] ret_from_fork+0x22/0x30 Removing the code that sets mddev->private to NULL in raid0 can fix problem.

In the Linux kernel, the following vulnerability has been resolved: vduse: Fix NULL pointer dereference on sysfs access The control device has no drvdata. So we will get a NULL pointer dereference when accessing control device's msg_timeout attribute via sysfs: [ 132.841881][ T3644] BUG: kernel NULL pointer dereference, address: 00000000000000f8 [ 132.850619][ T3644] RIP: 0010:msg_timeout_show (drivers/vdpa/vdpa_user/vduse_dev.c:1271) [ 132.869447][ T3644] dev_attr_show (drivers/base/core.c:2094) [ 132.870215][ T3644] sysfs_kf_seq_show (fs/sysfs/file.c:59) [ 132.871164][ T3644] ? device_remove_bin_file (drivers/base/core.c:2088) [ 132.872082][ T3644] kernfs_seq_show (fs/kernfs/file.c:164) [ 132.872838][ T3644] seq_read_iter (fs/seq_file.c:230) [ 132.873578][ T3644] ? __vmalloc_area_node (mm/vmalloc.c:3041) [ 132.874532][ T3644] kernfs_fop_read_iter (fs/kernfs/file.c:238) [ 132.875513][ T3644] __kernel_read (fs/read_write.c:440 (discriminator 1)) [ 132.876319][ T3644] kernel_read (fs/read_write.c:459) [ 132.877129][ T3644] kernel_read_file (fs/kernel_read_file.c:94) [ 132.877978][ T3644] kernel_read_file_from_fd (include/linux/file.h:45 fs/kernel_read_file.c:186) [ 132.879019][ T3644] __do_sys_finit_module (kernel/module.c:4207) [ 132.879930][ T3644] __ia32_sys_finit_module (kernel/module.c:4189) [ 132.880930][ T3644] do_int80_syscall_32 (arch/x86/entry/common.c:112 arch/x86/entry/common.c:132) [ 132.881847][ T3644] entry_INT80_compat (arch/x86/entry/entry_64_compat.S:419) To fix it, don't create the unneeded attribute for control device anymore.

In the Linux kernel, the following vulnerability has been resolved: net: sparx5: switchdev: fix possible NULL pointer dereference As the possible failure of the allocation, devm_kzalloc() may return NULL pointer. Therefore, it should be better to check the 'db' in order to prevent the dereference of NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't null dereference ops->destroy A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: treat all calls not a bcall when bc_serv is NULL When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ...

In the Linux kernel, the following vulnerability has been resolved: soc: bcm: Check for NULL return of devm_kzalloc() As the potential failure of allocation, devm_kzalloc() may return NULL. Then the 'pd->pmb' and the follow lines of code may bring null pointer dereference. Therefore, it is better to check the return value of devm_kzalloc() to avoid this confusion.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() Syzbot reported a null-ptr-deref bug: NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 3603 Comm: segctord Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0 fs/nilfs2/alloc.c:608 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0 Call Trace: <TASK> nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline] nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193 nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236 nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940 nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline] nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline] nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018 nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline] nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045 nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline] nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> ... If DAT metadata file is corrupted on disk, there is a case where req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during a b-tree operation that cascadingly updates ancestor nodes of the b-tree, because nilfs_dat_commit_alloc() for a lower level block can initialize the blocknr on the same DAT entry between nilfs_dat_prepare_end() and nilfs_dat_commit_end(). If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free() without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and causes the NULL pointer dereference above in nilfs_palloc_commit_free_entry() function, which leads to a crash. Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free(). This also calls nilfs_error() in that case to notify that there is a fatal flaw in the filesystem metadata and prevent further operations.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218 KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218

In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: fix possible NULL pointer dereference As the possible failure of the allocation, kzalloc() may return NULL pointer. Therefore, it should be better to check the 'sgi' in order to prevent the dereference of NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493866 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_hw_get_clk() when dev is NULL Any registered clk_core structure can have a NULL pointer in its dev field. While never actually documented, this is evidenced by the wide usage of clk_register and clk_hw_register with a NULL device pointer, and the fact that the core of_clk_hw_register() function also passes a NULL device pointer. A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that case will result in a NULL pointer derefence when it calls dev_name() on that NULL device pointer. Add a test for this case and use NULL as the dev_id if the device pointer is NULL.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Guard against invalid local ports When processing events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not for the CPU port (local port 0), which exists, but does not have all the fields as any local port. This can result in a NULL pointer dereference when trying access 'struct mlxsw_sp_port' fields which are not initialized for CPU port. Commit 63b08b1f6834 ("mlxsw: spectrum: Protect driver from buggy firmware") already handled such issue by bailing early when processing a PUDE event reported for the CPU port. Generalize the approach by moving the check to a common function and making use of it in all relevant places.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: sdata can be NULL during AMPDU start ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix potential NULL pointer dereference If sd_probe() sees an early error before sdkp->device is initialized, sd_zbc_release_disk() is called. This causes a NULL pointer dereference when sd_is_zoned() is called inside that function. Avoid this by removing the call to sd_zbc_release_disk() in sd_probe() error path. This change is safe and does not result in zone information memory leakage because the zone information for a zoned disk is allocated only when sd_revalidate_disk() is called, at which point sdkp->disk_dev is fully set, resulting in sd_disk_release() being called when needed to cleanup a disk zone information using sd_zbc_release_disk().

In the Linux kernel, the following vulnerability has been resolved: hwrng: cavium - fix NULL but dereferenced coccicheck error Fix following coccicheck warning: ./drivers/char/hw_random/cavium-rng-vf.c:182:17-20: ERROR: pdev is NULL but dereferenced.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: nixge: fix NULL dereference In function nixge_hw_dma_bd_release() dereference of NULL pointer priv->rx_bd_v is possible for the case of its allocation failure in nixge_hw_dma_bd_init(). Move for() loop with priv->rx_bd_v dereference under the check for its validity. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix NULL pointer dereference in dsa_port_reset_vlan_filtering The "ds" iterator variable used in dsa_port_reset_vlan_filtering() -> dsa_switch_for_each_port() overwrites the "dp" received as argument, which is later used to call dsa_port_vlan_filtering() proper. As a result, switches which do enter that code path (the ones with vlan_filtering_is_global=true) will dereference an invalid dp in dsa_port_reset_vlan_filtering() after leaving a VLAN-aware bridge. Use a dedicated "other_dp" iterator variable to avoid this from happening.

In the Linux kernel, the following vulnerability has been resolved: drm/sprd: fix potential NULL dereference 'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference it, remove this warning log. v1 -> v2: - Split checking platform_get_resource() return value to a separate patch - Use dev_warn() instead of removing the warning log

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereference in smc_pnet_find_ib() dev_name() was called with dev.parent as argument but without to NULL-check it before. Solve this by checking the pointer before the call to dev_name().

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: Add NULL check in BE reparenting Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test.

In the Linux kernel, the following vulnerability has been resolved: net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe() During driver initialization, the pointer of card info, i.e. the variable 'ci' is required. However, the definition of 'com20020pci_id_table' reveals that this field is empty for some devices, which will cause null pointer dereference when initializing these devices. The following log reveals it: [ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci] [ 3.975181] Call Trace: [ 3.976208] local_pci_probe+0x13f/0x210 [ 3.977248] pci_device_probe+0x34c/0x6d0 [ 3.977255] ? pci_uevent+0x470/0x470 [ 3.978265] really_probe+0x24c/0x8d0 [ 3.978273] __driver_probe_device+0x1b3/0x280 [ 3.979288] driver_probe_device+0x50/0x370 Fix this by checking whether the 'ci' is a null pointer first.

In the Linux kernel, the following vulnerability has been resolved: i2c: dev: check return value when calling dev_set_name() If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix TZ_GET_TRIP NULL pointer dereference Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if the thermal zone does not define one.

In the Linux kernel, the following vulnerability has been resolved: hwmon: Handle failure to register sensor with thermal zone correctly If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device.

In the Linux kernel, the following vulnerability has been resolved: rtc: pl031: fix rtc features null pointer dereference When there is no interrupt line, rtc alarm feature is disabled. The clearing of the alarm feature bit was being done prior to allocations of ldata->rtc device, resulting in a null pointer dereference. Clear RTC_FEATURE_ALARM after the rtc device is allocated.

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags In nvme_alloc_admin_tags, the admin_q can be set to an error (typically -ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which is checked immediately after the call. However, when we return the error message up the stack, to nvme_reset_work the error takes us to nvme_remove_dead_ctrl() nvme_dev_disable() nvme_suspend_queue(&dev->queues[0]). Here, we only check that the admin_q is non-NULL, rather than not an error or NULL, and begin quiescing a queue that never existed, leading to bad / NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel panic when enabling bearer When enabling a bearer on a node, a kernel panic is observed: [ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc] ... [ 4.520030] Call Trace: [ 4.520689] <IRQ> [ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc] [ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc] [ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc] [ 4.525292] tipc_rcv+0x5da/0x730 [tipc] [ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0 [ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc] [ 4.528737] __netif_receive_skb_list_core+0x20b/0x260 [ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0 [ 4.531450] ? dev_gro_receive+0x4c2/0x680 [ 4.532512] napi_complete_done+0x6f/0x180 [ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net] ... The node in question is receiving activate messages in another thread after changing bearer status to allow message sending/ receiving in current thread: thread 1 | thread 2 -------- | -------- | tipc_enable_bearer() | test_and_set_bit_lock() | tipc_bearer_xmit_skb() | | tipc_l2_rcv_msg() | tipc_rcv() | __tipc_node_link_up() | tipc_link_build_state_msg() | tipc_link_build_proto_msg() | tipc_mon_prep() | { | ... | // null-pointer dereference | u16 gen = mon->dom_gen; | ... | } // Not being executed yet | tipc_mon_create() | { | ... | // allocate | mon = kzalloc(); | ... | } | Monitoring pointer in thread 2 is dereferenced before monitoring data is allocated in thread 1. This causes kernel panic. This commit fixes it by allocating the monitoring data before enabling the bearer to receive messages.

In the Linux kernel, the following vulnerability has been resolved: net: sfc: add missing xdp queue reinitialization After rx/tx ring buffer size is changed, kernel panic occurs when it acts XDP_TX or XDP_REDIRECT. When tx/rx ring buffer size is changed(ethtool -G), sfc driver reallocates and reinitializes rx and tx queues and their buffer (tx_queue->buffer). But it misses reinitializing xdp queues(efx->xdp_tx_queues). So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized tx_queue->buffer. A new function efx_set_xdp_channels() is separated from efx_set_channels() to handle only xdp queues. Splat looks like: BUG: kernel NULL pointer dereference, address: 000000000000002a #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#4] PREEMPT SMP NOPTI RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297 RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0 RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0 FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0 RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297 PKRU: 55555554 RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700 RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700 FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0 PKRU: 55555554 Call Trace: <IRQ> efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] ? enqueue_task_fair+0x95/0x550 efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() It is possible to do NULL pointer dereference in routine that updates Tx ring stats. Currently only stats and bytes are updated when ring pointer is valid, but later on ring is accessed to propagate gathered Tx stats onto VSI stats. Change the existing logic to move to next ring when ring is NULL.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Fix NULL sring after live migration A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: qcom: Fix kernel panic on skipped partition In the event of a skipped partition (case when the entry name is empty) the kernel panics in the cleanup function as the name entry is NULL. Rework the parser logic by first checking the real partition number and then allocate the space and set the data for the valid partitions. The logic was also fundamentally wrong as with a skipped partition, the parts number returned was incorrect by not decreasing it for the skipped partitions.

In the Linux kernel, the following vulnerability has been resolved: ipw2x00: Fix potential NULL dereference in libipw_xmit() crypt and crypt->ops could be null, so we need to checking null before dereference

In the Linux kernel, the following vulnerability has been resolved: ALSA: jack: Access input_dev under mutex It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes.

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances.

In the Linux kernel, the following vulnerability has been resolved: drm/vrr: Set VRR capable prop only if it is attached to connector VRR capable property is not attached by default to the connector It is attached only if VRR is supported. So if the driver tries to call drm core set prop function without it being attached that causes NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create If there are failures then we must not leave the non-NULL pointers with the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries free them, resulting in an Oops.

In the Linux kernel, the following vulnerability has been resolved: USB: host: isp116x: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/hdmi: check return value after calling platform_get_resource_byname() It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value. Patchwork: https://patchwork.freedesktop.org/patch/482992/

In the Linux kernel, the following vulnerability has been resolved: ice: Add check for kzalloc Add the check for the return value of kzalloc in order to avoid NULL pointer dereference. Moreover, use the goto-label to share the clean code.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix unregistering of framebuffers without device OF framebuffers do not have an underlying device in the Linux device hierarchy. Do a regular unregister call instead of hot unplugging such a non-existing device. Fixes a NULL dereference. An example error message on ppc64le is shown below. BUG: Kernel NULL pointer dereference on read at 0x00000060 Faulting instruction address: 0xc00000000080dfa4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries [...] CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1 NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430 REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000 CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029 GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000 GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283 GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000 GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80 GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0 GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0 GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0 NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0 [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable) [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150 [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0 [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm] [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs] [...] [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0 [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250 The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal"). Most firmware framebuffers have an underlying platform device, which can be hot-unplugged before loading the native graphics driver. OF framebuffers do not (yet) have that device. Fix the code by unregistering the framebuffer as before without a hot unplug. Tested with 5.17 on qemu ppc64le emulation.