In the Linux kernel, the following vulnerability has been resolved: drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm_gem_object_lookup will call drm_gem_object_get inside. So cursor_bo needs to be put when msm_gem_get_and_pin_iova fails.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix memory leak in dwc2_hcd_init usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix memory leak when register device fail If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup().

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory leak in tracing_read_pipe() kmemleak reports this issue: unreferenced object 0xffff888105a18900 (size 128): comm "test_progs", pid 18933, jiffies 4336275356 (age 22801.766s) hex dump (first 32 bytes): 25 73 00 90 81 88 ff ff 26 05 00 00 42 01 58 04 %s......&...B.X. 03 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000560143a1>] __kmalloc_node_track_caller+0x4a/0x140 [<000000006af00822>] krealloc+0x8d/0xf0 [<00000000c309be6a>] trace_iter_expand_format+0x99/0x150 [<000000005a53bdb6>] trace_check_vprintf+0x1e0/0x11d0 [<0000000065629d9d>] trace_event_printf+0xb6/0xf0 [<000000009a690dc7>] trace_raw_output_bpf_trace_printk+0x89/0xc0 [<00000000d22db172>] print_trace_line+0x73c/0x1480 [<00000000cdba76ba>] tracing_read_pipe+0x45c/0x9f0 [<0000000015b58459>] vfs_read+0x17b/0x7c0 [<000000004aeee8ed>] ksys_read+0xed/0x1c0 [<0000000063d3d898>] do_syscall_64+0x3b/0x90 [<00000000a06dda7f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd iter->fmt alloced in tracing_read_pipe() -> .. ->trace_iter_expand_format(), but not freed, to fix, add free in tracing_release_pipe()

In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix potential memory leak in __qedr_alloc_mr() __qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr" is released while "mr->info.pbl_table" is not released, which will lead to a memory leak. We should release the "mr->info.pbl_table" with qedr_free_pbl() when error occurs to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: fbdev: smscufx: fix error handling code in ufx_usb_probe The current error handling code in ufx_usb_probe have many unmatching issues, e.g., missing ufx_free_usb_list, destroy_modedb label should only include framebuffer_release, fb_dealloc_cmap only matches fb_alloc_cmap. My local syzkaller reports a memory leak bug: memory leak in ufx_usb_probe BUG: memory leak unreferenced object 0xffff88802f879580 (size 128): comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s) hex dump (first 32 bytes): 80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff .!|............. 00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00 ................ backtrace: [<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045 [<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline] [<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline] [<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline] [<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655 [<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline] [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639 [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778 [<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808 [<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936 [<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008 [<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517 [<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170 [<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline] [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639 [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778 Fix this bug by rewriting the error handling code in ufx_usb_probe.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus() If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need goto error label in this case.

In the Linux kernel, the following vulnerability has been resolved: usbnet: fix memory leak in error case usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer

In the Linux kernel, the following vulnerability has been resolved: net/sunrpc: fix potential memory leaks in rpc_sysfs_xprt_state_change() The issue happens on some error handling paths. When the function fails to grab the object `xprt`, it simply returns 0, forgetting to decrease the reference count of another object `xps`, which is increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount leaks. Also, the function forgets to check whether `xps` is valid before using it, which may result in NULL-dereferencing issues. Fix it by adding proper error handling code when either `xprt` or `xps` is NULL.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: fix memory leak of elf header buffer This is reported by kmemleak detector: unreferenced object 0xffffc900002a9000 (size 4096): comm "kexec", pid 14950, jiffies 4295110793 (age 373.951s) hex dump (first 32 bytes): 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............ 04 00 3e 00 01 00 00 00 00 00 00 00 00 00 00 00 ..>............. backtrace: [<0000000016a8ef9f>] __vmalloc_node_range+0x101/0x170 [<000000002b66b6c0>] __vmalloc_node+0xb4/0x160 [<00000000ad40107d>] crash_prepare_elf64_headers+0x8e/0xcd0 [<0000000019afff23>] crash_load_segments+0x260/0x470 [<0000000019ebe95c>] bzImage64_load+0x814/0xad0 [<0000000093e16b05>] arch_kexec_kernel_image_load+0x1be/0x2a0 [<000000009ef2fc88>] kimage_file_alloc_init+0x2ec/0x5a0 [<0000000038f5a97a>] __do_sys_kexec_file_load+0x28d/0x530 [<0000000087c19992>] do_syscall_64+0x3b/0x90 [<0000000066e063a4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In crash_prepare_elf64_headers(), a buffer is allocated via vmalloc() to store elf headers. While it's not freed back to system correctly when kdump kernel is reloaded or unloaded. Then memory leak is caused. Fix it by introducing x86 specific function arch_kimage_file_post_load_cleanup(), and freeing the buffer there. And also remove the incorrect elf header buffer freeing code. Before calling arch specific kexec_file loading function, the image instance has been initialized. So 'image->elf_headers' must be NULL. It doesn't make sense to free the elf header buffer in the place. Three different people have reported three bugs about the memory leak on x86_64 inside Redhat.

In the Linux kernel, the following vulnerability has been resolved: Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send() There is a kmemleak when test the raydium_i2c_ts with bpf mock device: unreferenced object 0xffff88812d3675a0 (size 8): comm "python3", pid 349, jiffies 4294741067 (age 95.695s) hex dump (first 8 bytes): 11 0e 10 c0 01 00 04 00 ........ backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff88812d3675c8 (size 8): comm "python3", pid 349, jiffies 4294741070 (age 95.692s) hex dump (first 8 bytes): 22 00 36 2d 81 88 ff ff ".6-.... backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 After BANK_SWITCH command from i2c BUS, no matter success or error happened, the tx_buf should be freed.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix leak of nested actions While parsing user-provided actions, openvswitch module may dynamically allocate memory and store pointers in the internal copy of the actions. So this memory has to be freed while destroying the actions. Currently there are only two such actions: ct() and set(). However, there are many actions that can hold nested lists of actions and ovs_nla_free_flow_actions() just jumps over them leaking the memory. For example, removal of the flow with the following actions will lead to a leak of the memory allocated by nf_ct_tmpl_alloc(): actions:clone(ct(commit),0) Non-freed set() action may also leak the 'dst' structure for the tunnel info including device references. Under certain conditions with a high rate of flow rotation that may cause significant memory leak problem (2MB per second in reporter's case). The problem is also hard to mitigate, because the user doesn't have direct control over the datapath flows generated by OVS. Fix that by iterating over all the nested actions and freeing everything that needs to be freed recursively. New build time assertion should protect us from this problem if new actions will be added in the future. Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all attributes has to be explicitly checked. sample() and clone() actions are mixing extra attributes into the user-provided action list. That prevents some code generalization too.

In the Linux kernel, the following vulnerability has been resolved: mISDN: Fix memory leak in dsp_pipeline_build() dsp_pipeline_build() allocates dup pointer by kstrdup(cfg), but then it updates dup variable by strsep(&dup, "|"). As a result when it calls kfree(dup), the dup variable contains NULL. Found by Linux Driver Verification project (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix tag leaks on error In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails. Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free().

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix task leak in pm8001_send_abort_all() In pm8001_send_abort_all(), make sure to free the allocated sas task if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memory leak of uid in files registration When there are no files for __io_sqe_files_scm() to process in the range, it'll free everything and return. However, it forgets to put uid.

In the Linux kernel, the following vulnerability has been resolved: drm/imx: Fix memory leak in imx_pd_connector_get_modes Avoid leaking the display mode variable if of_get_drm_display_mode fails. Addresses-Coverity-ID: 1443943 ("Resource leak")

In the Linux kernel, the following vulnerability has been resolved: habanalabs: fix possible memory leak in MMU DR fini This patch fixes what seems to be copy paste error. We will have a memory leak if the host-resident shadow is NULL (which will likely happen as the DR and HR are not dependent).

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_readdir when note_last_dentry returns error Reset the last_readdir at the same time, and add a comment explaining why we don't free last_readdir when dir_emit returns false.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: fix memory leak during D3hot to D0 transition If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does not have No_Soft_Reset bit set in its PMCSR config register), then the current PCI state will be saved locally in 'vfio_pci_core_device::pm_save' during D0->D3hot transition and same will be restored back during D3hot->D0 transition. For saving the PCI state locally, pci_store_saved_state() is being used and the pci_load_and_free_saved_state() will free the allocated memory. But for reset related IOCTLs, vfio driver calls PCI reset-related API's which will internally change the PCI power state back to D0. So, when the guest resumes, then it will get the current state as D0 and it will skip the call to vfio_pci_set_power_state() for changing the power state to D0 explicitly. In this case, the memory pointed by 'pm_save' will never be freed. In a malicious sequence, the state changing to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be run in a loop and it can cause an OOM situation. This patch frees the earlier allocated memory first before overwriting 'pm_save' to prevent the mentioned memory leak.

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put().

In the Linux kernel, the following vulnerability has been resolved: block: fix memory leak in disk_register_independent_access_ranges kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by adding kobject_put(). Callback function blk_ia_ranges_sysfs_release() in kobject_put() can handle the pointer "iars" properly.

In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix platform-device leak in error path Make sure to free the flash platform device in the event that registration fails during probe.

In the Linux kernel, the following vulnerability has been resolved: scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() The error handling path of the probe releases a resource that is not freed in the remove function. In some cases, a ioremap() must be undone. Add the missing iounmap() call in the remove function.

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: lcd2s: Fix memory leak in ->remove() Once allocated the struct lcd2s_data is never freed. Fix the memory leak by switching to devm_kzalloc().

In the Linux kernel, the following vulnerability has been resolved: watch_queue: Free the page array when watch_queue is dismantled Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the watch_queue is torn down") took care of the bitmap, but not the page array. BUG: memory leak unreferenced object 0xffff88810d9bc140 (size 32): comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s) hex dump (first 32 bytes): 40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmalloc_array include/linux/slab.h:621 [inline] kcalloc include/linux/slab.h:652 [inline] watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251 pipe_ioctl+0x82/0x140 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline]

In the Linux kernel, the following vulnerability has been resolved: nfp: flower: Fix a potential leak in nfp_tunnel_add_shared_mac() ida_simple_get() returns an id between min (0) and max (NFP_MAX_MAC_INDEX) inclusive. So NFP_MAX_MAC_INDEX (0xff) is a valid id. In order for the error handling path to work correctly, the 'invalid' value for 'ida_idx' should not be in the 0..NFP_MAX_MAC_INDEX range, inclusive. So set it to -1.

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: ca8210: Stop leaking skb's Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure. Free the skb structure upon error before returning.

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(), which in a confidential VM allocates swiotlb bounce buffers. If the I/O submission fails in storvsc_do_io(), the I/O is typically retried by higher level code, but the bounce buffer memory is never freed. The mostly like cause of I/O submission failure is a full VMBus channel ring buffer, which is not uncommon under high I/O loads. Eventually enough bounce buffer memory leaks that the confidential VM can't do any I/O. The same problem can arise in a non-confidential VM with kernel boot parameter swiotlb=force. Fix this by doing scsi_dma_unmap() in the case of an I/O submission error, which frees the bounce buffer memory.

In the Linux kernel, the following vulnerability has been resolved: tracing/histogram: Fix a potential memory leak for kstrdup() kfree() is missing on an error path to free the memory allocated by kstrdup(): p = param = kstrdup(data->params[i], GFP_KERNEL); So it is better to free it via kfree(p).

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: free reset-work-item when flushing Fix a tiny memory leak when flushing the reset work queue.

In the Linux kernel, the following vulnerability has been resolved: wireguard: socket: free skb in send6 when ipv6 is disabled I got a memory leak report: unreferenced object 0xffff8881191fc040 (size 232): comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0 [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340 [<ffffffff832974fb>] __alloc_skb+0x1db/0x200 [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0 [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110 [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30 [<ffffffff8119c558>] process_one_work+0x2e8/0x770 [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0 [<ffffffff811a88e0>] kthread+0x120/0x160 [<ffffffff8100242f>] ret_from_fork+0x1f/0x30 In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_ buffer_to_peer(), the semantics of send6() is required to free skb. But when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it to fix this bug.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions() When dsa_devlink_region_create failed in sja1105_setup_devlink_regions(), priv->regions is not released.

In the Linux kernel, the following vulnerability has been resolved: block: null_blk: end timed out poll request When poll request is timed out, it is removed from the poll list, but not completed, so the request is leaked, and never get chance to complete. Fix the issue by ending it in timeout handler.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921s: fix a possible memory leak in mt7921_load_patch Always release fw data at the end of mt7921_load_patch routine.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: pci: add missing m_can_class_free_dev() in probe/remove methods In m_can_pci_remove() and error handling path of m_can_pci_probe(), m_can_class_free_dev() should be called to free resource allocated by m_can_class_allocate_dev(), otherwise there will be memleak.

In the Linux kernel, the following vulnerability has been resolved: ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: fix memory leak in int3400_notify() It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping() After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion.

In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Do proper cleanup if IFCVF init fails ifcvf_mgmt_dev leaks memory if it is not freed before returning. Call is made to correct return statement so memory does not leak. ifcvf_init_hw does not take care of this so it is needed to do it here.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix potential memory leak in otx2_init_tc() In otx2_init_tc(), if rhashtable_init() failed, it does not free tc->tc_entries_bitmap which is allocated in otx2_tc_alloc_ent_bitmap().

In the Linux kernel, the following vulnerability has been resolved: block: release rq qos structures for queue without disk blkcg_init_queue() may add rq qos structures to request queue, previously blk_cleanup_queue() calls rq_qos_exit() to release them, but commit 8e141f9eb803 ("block: drain file system I/O on del_gendisk") moves rq_qos_exit() into del_gendisk(), so memory leak is caused because queues may not have disk, such as un-present scsi luns, nvme admin queue, ... Fixes the issue by adding rq_qos_exit() to blk_cleanup_queue() back. BTW, v5.18 won't need this patch any more since we move blkcg_init_queue()/blkcg_exit_queue() into disk allocation/release handler, and patches have been in for-5.18/block.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix memory leak in msm_mdss_parse_data_bus_icc_path of_icc_get() alloc resources for path1, we should release it when not need anymore. Early return when IS_ERR_OR_NULL(path0) may leak path1. Defer getting path1 to fix this. Patchwork: https://patchwork.freedesktop.org/patch/514264/

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_mux_init() When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux is not released.

In the Linux kernel, the following vulnerability has been resolved: mtd: parsers: qcom: Fix missing free for pparts in cleanup Mtdpart doesn't free pparts when a cleanup function is declared. Add missing free for pparts in cleanup function for smem to fix the leak.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix connection leak There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable.

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets() The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not freed in damon_sysfs_test_add_targets(), which cause the following memory leak, free it to fix it. unreferenced object 0xffffff80c2a8db80 (size 96): comm "kunit_try_catch", pid 187, jiffies 4294894363 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): [<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738 [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: iio: adc: men_z188_adc: Fix a resource leak in an error handling path If iio_device_register() fails, a previous ioremap() is left unbalanced. Update the error handling path and add the missing iounmap() call, as already done in the remove function.

In the Linux kernel, the following vulnerability has been resolved: memstick/mspro_block: fix handling of read-only devices Use set_disk_ro to propagate the read-only state to the block layer instead of checking for it in ->open and leaking a reference in case of a read-only device.