In the Linux kernel, the following vulnerability has been resolved: serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix region HPA ordering validation Some regions may not have any address space allocated. Skip them when validating HPA order otherwise a crash like the following may result: devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9 BUG: kernel NULL pointer dereference, address: 0000000000000000 [..] RIP: 0010:store_targetN+0x655/0x1740 [cxl_core] [..] Call Trace: <TASK> kernfs_fop_write_iter+0x144/0x200 vfs_write+0x24a/0x4d0 ksys_write+0x69/0xf0 do_syscall_64+0x3a/0x90 store_targetN+0x655/0x1740: alloc_region_ref at drivers/cxl/core/region.c:676 (inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850 (inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290 (inlined by) attach_target at drivers/cxl/core/region.c:1410 (inlined by) store_targetN at drivers/cxl/core/region.c:1453

In the Linux kernel, the following vulnerability has been resolved: drm/msm/hdmi: check return value after calling platform_get_resource_byname() It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value. Patchwork: https://patchwork.freedesktop.org/patch/482992/

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: sf-pdma: Add multithread support for a DMA channel When we get a DMA channel and try to use it in multiple threads it will cause oops and hanging the system. % echo 64 > /sys/module/dmatest/parameters/threads_per_chan % echo 10000 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/run [ 89.480664] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 89.488725] Oops [#1] [ 89.494708] CPU: 2 PID: 1008 Comm: dma0chan0-copy0 Not tainted 5.17.0-rc5 [ 89.509385] epc : vchan_find_desc+0x32/0x46 [ 89.513553] ra : sf_pdma_tx_status+0xca/0xd6 This happens because of data race. Each thread rewrite channels's descriptor as soon as device_prep_dma_memcpy() is called. It leads to the situation when the driver thinks that it uses right descriptor that actually is freed or substituted for other one. With current fixes a descriptor changes its value only when it has been used. A new descriptor is acquired from vc->desc_issued queue that is already filled with descriptors that are ready to be sent. Threads have no direct access to DMA channel descriptor. Now it is just possible to queue a descriptor for further processing.

In the Linux kernel, the following vulnerability has been resolved: net, neigh: Fix null-ptr-deref in neigh_table_clear() When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: <TASK> neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix null pointer dereference in ftrace_add_mod() The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next} of @ftrace_mode->list are NULL, it's not a valid state to call list_del(). If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del() will write prev->next and next->prev, where null pointer dereference happens. BUG: kernel NULL pointer dereference, address: 0000000000000008 Oops: 0002 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ftrace_mod_callback+0x20d/0x220 ? do_filp_open+0xd9/0x140 ftrace_process_regex.isra.51+0xbf/0x130 ftrace_regex_write.isra.52.part.53+0x6e/0x90 vfs_write+0xee/0x3a0 ? __audit_filter_op+0xb1/0x100 ? auditd_test_task+0x38/0x50 ksys_write+0xa5/0xe0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Kernel panic - not syncing: Fatal exception So call INIT_LIST_HEAD() to initialize the list member to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init() lan966x_stats_init() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: lan966x_stats_init() create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc The allocation funciton devm_kcalloc may fail and return a null pointer, which would cause a null-pointer dereference later. It might be better to check it and directly return -ENOMEM just like the usage of devm_kcalloc in previous code.

In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-qspi: check return value after calling platform_get_resource_byname() It will cause null-ptr-deref if platform_get_resource_byname() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: ALSA: jack: Access input_dev under mutex It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Correctly move list in sc_disable() Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") incorrectly tries to move a list from one list head to another. The result is a kernel crash. The crash is triggered when a link goes down and there are waiters for a send to complete. The following signature is seen: BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] Call Trace: sc_disable+0x1ba/0x240 [hfi1] pio_freeze+0x3d/0x60 [hfi1] handle_freeze+0x27/0x1b0 [hfi1] process_one_work+0x1b0/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xd7/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 The fix is to use the correct call to move the list.

In the Linux kernel, the following vulnerability has been resolved: drm: Fix potential null-ptr-deref in drm_vblank_destroy_worker() drm_vblank_init() call drmm_add_action_or_reset() with drm_vblank_init_release() as action. If __drmm_add_action() failed, will directly call drm_vblank_init_release() with the vblank whose worker is NULL. As the resule, a null-ptr-deref will happen in kthread_destroy_worker(). Add the NULL check before calling drm_vblank_destroy_worker(). BUG: null-ptr-deref KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 5 PID: 961 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf-dirty RIP: 0010:kthread_destroy_worker+0x25/0xb0 Call Trace: <TASK> drm_vblank_init_release+0x124/0x220 [drm] ? drm_crtc_vblank_restore+0x8b0/0x8b0 [drm] __drmm_add_action_or_reset+0x41/0x50 [drm] drm_vblank_init+0x282/0x310 [drm] vkms_init+0x35f/0x1000 [vkms] ? 0xffffffffc4508000 ? lock_is_held_type+0xd7/0x130 ? __kmem_cache_alloc_node+0x1c2/0x2b0 ? lock_is_held_type+0xd7/0x130 ? 0xffffffffc4508000 do_one_initcall+0xd0/0x4f0 ... do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: pinctrl: renesas: core: Fix possible null-ptr-deref in sh_pfc_map_resources() It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed There is a null-ptr-deref when xps sysfs alloc failed: BUG: KASAN: null-ptr-deref in sysfs_do_create_link_sd+0x40/0xd0 Read of size 8 at addr 0000000000000030 by task gssproxy/457 CPU: 5 PID: 457 Comm: gssproxy Not tainted 6.0.0-09040-g02357b27ee03 #9 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xa3/0x120 sysfs_do_create_link_sd+0x40/0xd0 rpc_sysfs_client_setup+0x161/0x1b0 rpc_new_client+0x3fc/0x6e0 rpc_create_xprt+0x71/0x220 rpc_create+0x1d4/0x350 gssp_rpc_create+0xc3/0x160 set_gssp_clnt+0xbc/0x140 write_gssp+0x116/0x1a0 proc_reg_write+0xd6/0x130 vfs_write+0x177/0x690 ksys_write+0xb9/0x150 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 When the xprt_switch sysfs alloc failed, should not add xprt and switch sysfs to it, otherwise, maybe null-ptr-deref; also initialize the 'xps_sysfs' to NULL to avoid oops when destroy it.

In the Linux kernel, the following vulnerability has been resolved: rtc: mt6397: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: suppress non-changes to the tagging protocol The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0

In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix rumble worker null pointer deref We can dereference a null pointer trying to queue work to a destroyed workqueue. If the device is disconnected, nintendo_hid_remove is called, in which the rumble_queue is destroyed. Avoid using that queue to defer rumble work once the controller state is set to JOYCON_CTLR_STATE_REMOVED. This eliminates the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE When using bpftool to pin {PROG, MAP, LINK} without FILE, segmentation fault will occur. The reson is that the lack of FILE will cause strlen to trigger NULL pointer dereference. The corresponding stacktrace is shown below: do_pin do_pin_any do_pin_fd mount_bpffs_for_pin strlen(name) <- NULL pointer dereference Fix it by adding validation to the common process.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Return error code in mdp5_pipe_release when deadlock is detected mdp5_get_global_state runs the risk of hitting a -EDEADLK when acquiring the modeset lock, but currently mdp5_pipe_release doesn't check for if an error is returned. Because of this, there is a possibility of mdp5_pipe_release hitting a NULL dereference error. To avoid this, let's have mdp5_pipe_release check if mdp5_get_global_state returns an error and propogate that error. Changes since v1: - Separated declaration and initialization of *new_state to avoid compiler warning - Fixed some spelling mistakes in commit message Changes since v2: - Return 0 in case where hwpipe is NULL as this is considered normal behavior - Added 2nd patch in series to fix a similar NULL dereference issue in mdp5_mixer_release Patchwork: https://patchwork.freedesktop.org/patch/485179/

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: ralink: Check for null return of devm_kcalloc Because of the possible failure of the allocation, data->domains might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and directly return -ENOMEM without releasing data manually if fails, because the comment of the devm_kmalloc() says "Memory allocated with this function is automatically freed on driver detach.".

In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace captured via netconsole: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 7231 Comm: ping Kdump: loaded Not tainted 5.19.0+ #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 RIP: 0010:xfrm_lookup_with_ifid+0x5eb/0xa60 Code: 8d 74 24 38 e8 26 a4 37 00 48 89 c1 e9 12 fc ff ff 49 63 ed 41 83 fd be 0f 85 be 01 00 00 41 be ff ff ff ff 45 31 ed 48 8b 03 <f6> 80 c0 00 00 00 08 75 0f 41 80 bc 24 19 0d 00 00 01 0f 84 1e 02 RSP: 0018:ffffb0db82c679f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffd0db7fcad430 RCX: ffffb0db82c67a10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb0db82c67a80 RBP: ffffb0db82c67a80 R08: ffffb0db82c67a14 R09: 0000000000000000 R10: 0000000000000000 R11: ffff8fa449667dc8 R12: ffffffff966db880 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007ff35c83f000(0000) GS:ffff8fa478480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 000000001ebb7000 CR4: 0000000000350ee0 Call Trace: <TASK> xfrmi_xmit+0xde/0x460 ? tcf_bpf_act+0x13d/0x2a0 dev_hard_start_xmit+0x72/0x1e0 __dev_queue_xmit+0x251/0xd30 ip_finish_output2+0x140/0x550 ip_push_pending_frames+0x56/0x80 raw_sendmsg+0x663/0x10a0 ? try_charge_memcg+0x3fd/0x7a0 ? __mod_memcg_lruvec_state+0x93/0x110 ? sock_sendmsg+0x30/0x40 sock_sendmsg+0x30/0x40 __sys_sendto+0xeb/0x130 ? handle_mm_fault+0xae/0x280 ? do_user_addr_fault+0x1e7/0x680 ? kvm_read_and_reset_apf_flags+0x3b/0x50 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7ff35cac1366 Code: eb 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 RSP: 002b:00007fff738e4028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fff738e57b0 RCX: 00007ff35cac1366 RDX: 0000000000000040 RSI: 0000557164e4b450 RDI: 0000000000000003 RBP: 0000557164e4b450 R08: 00007fff738e7a2c R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 00007fff738e5770 R14: 00007fff738e4030 R15: 0000001d00000001 </TASK> Modules linked in: netconsole veth br_netfilter bridge bonding virtio_net [last unloaded: netconsole] CR2: 00000000000000c0

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Don't unregister on shutdown Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: treat all calls not a bcall when bc_serv is NULL When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ...

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held.

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Check for null before removing sysfs attrs If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Implement ref count for SRB The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21 qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400. qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx] Obvious solution to this is to introduce a reference counter. One reference is taken for the normal code path (the 'good' case) and one for the timeout path. As we always race between the normal good case and the timeout/abort handler we need to serialize it. Also we cannot assume any order between the handlers. Since this is slow path we can use proper synchronization via locks. When we are able to cancel a timer (del_timer returns 1) we know there can't be any error handling in progress because the timeout handler hasn't expired yet, thus we can safely decrement the refcounter by one. If we are not able to cancel the timer, we know an abort handler is running. We have to make sure we call sp->done() in the abort handlers before calling kref_put().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: populate connector of struct dp_panel DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose and expect DP source return correct checksum. During drm edid read, correct edid checksum is calculated and stored at connector::real_edid_checksum. The problem is struct dp_panel::connector never be assigned, instead the connector is stored in struct msm_dp::connector. When we run compliance testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid edid set in struct dp_panel::edid so we'll try to use the connectors real_edid_checksum and hit a NULL pointer dereference error because the connector pointer is never assigned. Changes in V2: -- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps() Changes in V3: -- remove unhelpful kernel crash trace commit text -- remove renaming dp_display parameter to dp Changes in V4: -- add more details to commit text Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]

In the Linux kernel, the following vulnerability has been resolved: hwrng: cavium - fix NULL but dereferenced coccicheck error Fix following coccicheck warning: ./drivers/char/hw_random/cavium-rng-vf.c:182:17-20: ERROR: pdev is NULL but dereferenced.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix null pointer dereference for resetting decoder Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f.

In the Linux kernel, the following vulnerability has been resolved: hwmon: Handle failure to register sensor with thermal zone correctly If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device.

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - get rid of alg_memory_allocated alg_memory_allocated does not seem to be really used. alg_proto does have a .memory_allocated field, but no corresponding .sysctl_mem. This means sk_has_account() returns true, but all sk_prot_mem_limits() users will trigger a NULL dereference [1]. THis was not a problem until SO_RESERVE_MEM addition. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3591 Comm: syz-executor153 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_setsockopt+0x14a9/0x3a30 net/core/sock.c:1446 __sys_setsockopt+0x5af/0x980 net/socket.c:2176 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xb1/0xc0 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc7440fddc9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe98f07968 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc7440fddc9 RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000004 R09: 00007ffe98f07990 R10: 0000000020000000 R11: 0000000000000246 R12: 00007ffe98f0798c R13: 00007ffe98f079a0 R14: 00007ffe98f079e0 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:sk_prot_mem_limits include/net/sock.h:1523 [inline] RIP: 0010:sock_reserve_memory+0x1d7/0x330 net/core/sock.c:1000 Code: 08 00 74 08 48 89 ef e8 27 20 bb f9 4c 03 7c 24 10 48 8b 6d 00 48 83 c5 08 48 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 48 89 ef e8 fb 1f bb f9 48 8b 6d 00 4c 89 ff 48 RSP: 0018:ffffc90001f1fb68 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88814aabc000 RCX: dffffc0000000000 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffff90e18120 RBP: 0000000000000008 R08: dffffc0000000000 R09: fffffbfff21c3025 R10: fffffbfff21c3025 R11: 0000000000000000 R12: ffffffff8d109840 R13: 0000000000001002 R14: 0000000000000001 R15: 0000000000000001 FS: 0000555556e08300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc74416f130 CR3: 0000000073d9e000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000

In the Linux kernel, the following vulnerability has been resolved: drm/sprd: fix potential NULL dereference 'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference it, remove this warning log. v1 -> v2: - Split checking platform_get_resource() return value to a separate patch - Use dev_warn() instead of removing the warning log

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/cs: make commands with 0 chunks illegal behaviour. Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver. MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo [172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() Syzbot reported a null-ptr-deref bug: NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 3603 Comm: segctord Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0 fs/nilfs2/alloc.c:608 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0 Call Trace: <TASK> nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline] nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193 nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236 nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940 nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline] nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline] nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018 nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline] nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045 nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline] nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> ... If DAT metadata file is corrupted on disk, there is a case where req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during a b-tree operation that cascadingly updates ancestor nodes of the b-tree, because nilfs_dat_commit_alloc() for a lower level block can initialize the blocknr on the same DAT entry between nilfs_dat_prepare_end() and nilfs_dat_commit_end(). If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free() without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and causes the NULL pointer dereference above in nilfs_palloc_commit_free_entry() function, which leads to a crash. Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free(). This also calls nilfs_error() in that case to notify that there is a fatal flaw in the filesystem metadata and prevent further operations.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent bad output lengths in smb2_ioctl_query_info() When calling smb2_ioctl_query_info() with smb_query_info::flags=PASSTHRU_FSCTL and smb_query_info::output_buffer_length=0, the following would return 0x10 buffer = memdup_user(arg + sizeof(struct smb_query_info), qi.output_buffer_length); if (IS_ERR(buffer)) { kfree(vars); return PTR_ERR(buffer); } rather than a valid pointer thus making IS_ERR() check fail. This would then cause a NULL ptr deference in @buffer when accessing it later in smb2_ioctl_query_ioctl(). While at it, prevent having a @buffer smaller than 8 bytes to correctly handle SMB2_SET_INFO FileEndOfFileInformation requests when smb_query_info::flags=PASSTHRU_SET_INFO. Here is a small C reproducer which triggers a NULL ptr in @buffer when passing an invalid smb_query_info::flags #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <unistd.h> #include <fcntl.h> #include <sys/ioctl.h> #define die(s) perror(s), exit(1) #define QUERY_INFO 0xc018cf07 int main(int argc, char *argv[]) { int fd; if (argc < 2) exit(1); fd = open(argv[1], O_RDONLY); if (fd == -1) die("open"); if (ioctl(fd, QUERY_INFO, (uint32_t[]) { 0, 0, 0, 4, 0, 0}) == -1) die("ioctl"); close(fd); return 0; } mount.cifs //srv/share /mnt -o ... gcc repro.c && ./a.out /mnt/f0 [ 114.138620] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 114.139310] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 114.139775] CPU: 2 PID: 995 Comm: a.out Not tainted 5.17.0-rc8 #1 [ 114.140148] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 114.140818] RIP: 0010:smb2_ioctl_query_info+0x206/0x410 [cifs] [ 114.141221] Code: 00 00 00 00 fc ff df 48 c1 ea 03 80 3c 02 00 0f 85 c8 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 7b 28 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 49 8b 3f e8 58 02 fb ff 48 8b 14 24 [ 114.142348] RSP: 0018:ffffc90000b47b00 EFLAGS: 00010256 [ 114.142692] RAX: dffffc0000000000 RBX: ffff888115503200 RCX: ffffffffa020580d [ 114.143119] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffa043a380 [ 114.143544] RBP: ffff888115503278 R08: 0000000000000001 R09: 0000000000000003 [ 114.143983] R10: fffffbfff4087470 R11: 0000000000000001 R12: ffff888115503288 [ 114.144424] R13: 00000000ffffffea R14: ffff888115503228 R15: 0000000000000000 [ 114.144852] FS: 00007f7aeabdf740(0000) GS:ffff888151600000(0000) knlGS:0000000000000000 [ 114.145338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 114.145692] CR2: 00007f7aeacfdf5e CR3: 000000012000e000 CR4: 0000000000350ee0 [ 114.146131] Call Trace: [ 114.146291] <TASK> [ 114.146432] ? smb2_query_reparse_tag+0x890/0x890 [cifs] [ 114.146800] ? cifs_mapchar+0x460/0x460 [cifs] [ 114.147121] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.147412] ? cifs_strndup_to_utf16+0x15b/0x250 [cifs] [ 114.147775] ? dentry_path_raw+0xa6/0xf0 [ 114.148024] ? cifs_convert_path_to_utf16+0x198/0x220 [cifs] [ 114.148413] ? smb2_check_message+0x1080/0x1080 [cifs] [ 114.148766] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.149065] cifs_ioctl+0x1577/0x3320 [cifs] [ 114.149371] ? lock_downgrade+0x6f0/0x6f0 [ 114.149631] ? cifs_readdir+0x2e60/0x2e60 [cifs] [ 114.149956] ? rcu_read_lock_sched_held+0x3f/0x70 [ 114.150250] ? __rseq_handle_notify_resume+0x80b/0xbe0 [ 114.150562] ? __up_read+0x192/0x710 [ 114.150791] ? __ia32_sys_rseq+0xf0/0xf0 [ 114.151025] ? __x64_sys_openat+0x11f/0x1d0 [ 114.151296] __x64_sys_ioctl+0x127/0x190 [ 114.151549] do_syscall_64+0x3b/0x90 [ 114.151768] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 114.152079] RIP: 0033:0x7f7aead043df [ 114.152306] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create If there are failures then we must not leave the non-NULL pointers with the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries free them, resulting in an Oops.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: sdata can be NULL during AMPDU start ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775) Fix crash in clear_caseopen Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Let probe fail when workqueue cannot be enabled The workqueue is enabled when the appropriate driver is loaded and disabled when the driver is removed. When the driver is removed it assumes that the workqueue was enabled successfully and proceeds to free allocations made during workqueue enabling. Failure during workqueue enabling does not prevent the driver from being loaded. This is because the error path within drv_enable_wq() returns success unless a second failure is encountered during the error path. By returning success it is possible to load the driver even if the workqueue cannot be enabled and allocations that do not exist are attempted to be freed during driver remove. Some examples of problematic flows: (a) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_unmap_portal() is called on error exit path, but drv_enable_wq() returns 0 because idxd_wq_disable() succeeds. The driver is thus loaded successfully. idxd_dmaengine_drv_remove()->drv_disable_wq()->idxd_wq_unmap_portal() Above flow on driver unload triggers the WARN in devm_iounmap() because the device resource has already been removed during error path of drv_enable_wq(). (b) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_init_percpu_ref() is never called to initialize the percpu counter, yet the driver loads successfully because drv_enable_wq() returns 0. idxd_dmaengine_drv_remove()->__idxd_wq_quiesce()->percpu_ref_kill(): Above flow on driver unload triggers a BUG when attempting to drop the initial ref of the uninitialized percpu ref: BUG: kernel NULL pointer dereference, address: 0000000000000010 Fix the drv_enable_wq() error path by returning the original error that indicates failure of workqueue enabling. This ensures that the probe fails when an error is encountered and the driver remove paths are only attempted when the workqueue was enabled successfully.

In the Linux kernel, the following vulnerability has been resolved: can: slcan: fix freed work crash The LTP test pty03 is causing a crash in slcan: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (events) RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185) Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968 RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0 RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734 R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0 FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0 Call Trace: <TASK> worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436) kthread (/home/rich/kernel/linux/kernel/kthread.c:376) ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312) Apparently, the slcan's tx_work is freed while being scheduled. While slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work), slcan_close() (tty side) does not. So when the netdev is never set UP, but the tty is stuffed with bytes and forced to wakeup write, the work is scheduled, but never flushed. So add an additional flush_work() to slcan_close() to be sure the work is flushed under all circumstances. The Fixes commit below moved flush_work() from slcan_close() to slcan_netdev_close(). What was the rationale behind it? Maybe we can drop the one in slcan_netdev_close()? I see the same pattern in can327. So it perhaps needs the very same fix.

In the Linux kernel, the following vulnerability has been resolved: qede: confirm skb is allocated before using qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb().

In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_hw_get_clk() when dev is NULL Any registered clk_core structure can have a NULL pointer in its dev field. While never actually documented, this is evidenced by the wide usage of clk_register and clk_hw_register with a NULL device pointer, and the fact that the core of_clk_hw_register() function also passes a NULL device pointer. A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that case will result in a NULL pointer derefence when it calls dev_name() on that NULL device pointer. Add a test for this case and use NULL as the dev_id if the device pointer is NULL.