In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). E.g. KVM will encounter a NULL pointer when attempting to add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to create a VM before vmx_init() configures said list. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel] <TASK> vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 [kvm] vcpu_load+0x2f/0x40 [kvm] kvm_arch_vcpu_create+0x231/0x310 [kvm] kvm_vm_ioctl+0x79f/0xe10 [kvm] ? handle_mm_fault+0xb1/0x220 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f5a6b05743b </TASK> Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Don't unregister on shutdown Michael Walle says he noticed the following stack trace while performing a shutdown with "reboot -f". He suggests he got "lucky" and just hit the correct spot for the reboot while there was a packet transmission in flight. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930 Hardware name: Kontron KBox A-230-LS (DT) pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_map_page+0x9c/0x254 Call trace: iommu_get_dma_domain+0x14/0x20 dma_map_page_attrs+0x1ec/0x250 enetc_start_xmit+0x14c/0x10b0 enetc_xmit+0x60/0xdc dev_hard_start_xmit+0xb8/0x210 sch_direct_xmit+0x11c/0x420 __dev_queue_xmit+0x354/0xb20 ip6_finish_output2+0x280/0x5b0 __ip6_finish_output+0x15c/0x270 ip6_output+0x78/0x15c NF_HOOK.constprop.0+0x50/0xd0 mld_sendpack+0x1bc/0x320 mld_ifc_work+0x1d8/0x4dc process_one_work+0x1e8/0x460 worker_thread+0x178/0x534 kthread+0xe0/0xe4 ret_from_fork+0x10/0x20 Code: d503201f f9416800 d503233f d50323bf (f9404c00) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt This appears to be reproducible when the board has a fixed IP address, is ping flooded from another host, and "reboot -f" is used. The following is one more manifestation of the issue: $ reboot -f kvm: exiting hardware virtualization cfg80211: failed to load regulatory.db arm-smmu 5000000.iommu: disabling translation sdhci-esdhc 2140000.mmc: Removing from iommu group 11 sdhci-esdhc 2150000.mmc: Removing from iommu group 12 fsl-edma 22c0000.dma-controller: Removing from iommu group 17 dwc3 3100000.usb: Removing from iommu group 9 dwc3 3110000.usb: Removing from iommu group 10 ahci-qoriq 3200000.sata: Removing from iommu group 2 fsl-qdma 8380000.dma-controller: Removing from iommu group 20 platform f080000.display: Removing from iommu group 0 etnaviv-gpu f0c0000.gpu: Removing from iommu group 1 etnaviv etnaviv: Removing from iommu group 1 caam_jr 8010000.jr: Removing from iommu group 13 caam_jr 8020000.jr: Removing from iommu group 14 caam_jr 8030000.jr: Removing from iommu group 15 caam_jr 8040000.jr: Removing from iommu group 16 fsl_enetc 0000:00:00.0: Removing from iommu group 4 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.1: Removing from iommu group 5 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.2: Removing from iommu group 6 fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8 mscc_felix 0000:00:00.5: Removing from iommu group 3 fsl_enetc 0000:00:00.6: Removing from iommu group 7 pcieport 0001:00:00.0: Removing from iommu group 18 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 pcieport 0002:00:00.0: Removing from iommu group 19 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_unmap_page+0x38/0xe0 Call trace: iommu_get_dma_domain+0x14/0x20 dma_unmap_page_attrs+0x38/0x1d0 en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: leds: class: Protect brightness_show() with led_cdev->led_access mutex There is NULL pointer issue observed if from Process A where hid device being added which results in adding a led_cdev addition and later a another call to access of led_cdev attribute from Process B can result in NULL pointer issue. Use mutex led_cdev->led_access to protect access to led->cdev and its attribute inside brightness_show() and max_brightness_show() and also update the comment for mutex that it should be used to protect the led class device fields. Process A Process B kthread+0x114 worker_thread+0x244 process_scheduled_works+0x248 uhid_device_add_worker+0x24 hid_add_device+0x120 device_add+0x268 bus_probe_device+0x94 device_initial_probe+0x14 __device_attach+0xfc bus_for_each_drv+0x10c __device_attach_driver+0x14c driver_probe_device+0x3c __driver_probe_device+0xa0 really_probe+0x190 hid_device_probe+0x130 ps_probe+0x990 ps_led_register+0x94 devm_led_classdev_register_ext+0x58 led_classdev_register_ext+0x1f8 device_create_with_groups+0x48 device_create_groups_vargs+0xc8 device_add+0x244 kobject_uevent+0x14 kobject_uevent_env[jt]+0x224 mutex_unlock[jt]+0xc4 __mutex_unlock_slowpath+0xd4 wake_up_q+0x70 try_to_wake_up[jt]+0x48c preempt_schedule_common+0x28 __schedule+0x628 __switch_to+0x174 el0t_64_sync+0x1a8/0x1ac el0t_64_sync_handler+0x68/0xbc el0_svc+0x38/0x68 do_el0_svc+0x1c/0x28 el0_svc_common+0x80/0xe0 invoke_syscall+0x58/0x114 __arm64_sys_read+0x1c/0x2c ksys_read+0x78/0xe8 vfs_read+0x1e0/0x2c8 kernfs_fop_read_iter+0x68/0x1b4 seq_read_iter+0x158/0x4ec kernfs_seq_show+0x44/0x54 sysfs_kf_seq_show+0xb4/0x130 dev_attr_show+0x38/0x74 brightness_show+0x20/0x4c dualshock4_led_get_brightness+0xc/0x74 [ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 3313.874301][ T4013] Mem abort info: [ 3313.874303][ T4013] ESR = 0x0000000096000006 [ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits [ 3313.874307][ T4013] SET = 0, FnV = 0 [ 3313.874309][ T4013] EA = 0, S1PTW = 0 [ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault [ 3313.874313][ T4013] Data abort info: [ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000 .. [ 3313.874332][ T4013] Dumping ftrace buffer: [ 3313.874334][ T4013] (ftrace buffer empty) .. .. [ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader [ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74 [ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60 [ 3313.874656][ T4013] sp : ffffffc0b910bbd0 .. .. [ 3313.874685][ T4013] Call trace: [ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74 [ 3313.874690][ T4013] brightness_show+0x20/0x4c [ 3313.874692][ T4013] dev_attr_show+0x38/0x74 [ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130 [ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54 [ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec [ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4 [ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8 [ 3313.874711][ T4013] ksys_read+0x78/0xe8 [ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c [ 3313.874718][ T4013] invoke_syscall+0x58/0x114 [ 3313.874721][ T4013] el0_svc_common+0x80/0xe0 [ 3313.874724][ T4013] do_el0_svc+0x1c/0x28 [ 3313.874727][ T4013] el0_svc+0x38/0x68 [ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc [ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null-deref in dm_resume [Why] Fixing smatch error: dm_resume() error: we previously assumed 'aconnector->dc_link' could be null [How] Check if dc_link null at the beginning of the loop, so further checks can be dropped.

In nf_tables_updtable, if nf_tables_table_enable returns an error, nft_trans_destroy is called to free the transaction object. nft_trans_destroy() calls list_del(), but the transaction was never placed on a list -- the list head is all zeroes, this results in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net: phy: fix null-ptr-deref while probe() failed I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct().

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix initialization of rx->link and rx->link_sta There are some codepaths that do not initialize rx->link_sta properly. This causes a crash in places which assume that rx->link_sta is valid if rx->sta is valid. One known instance is triggered by __ieee80211_rx_h_amsdu being called from fast-rx. It results in a crash like this one: BUG: kernel NULL pointer dereference, address: 00000000000000a8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 PID: 506 Comm: mt76-usb-rx phy Tainted: G E 6.1.0-debian64x+1.7 #3 Hardware name: ZOTAC ZBOX-ID92/ZBOX-IQ01/ZBOX-ID92/ZBOX-IQ01, BIOS B220P007 05/21/2014 RIP: 0010:ieee80211_deliver_skb+0x62/0x1f0 [mac80211] Code: 00 48 89 04 24 e8 9e a7 c3 df 89 c0 48 03 1c c5 a0 ea 39 a1 4c 01 6b 08 48 ff 03 48 83 7d 28 00 74 11 48 8b 45 30 48 63 55 44 <48> 83 84 d0 a8 00 00 00 01 41 8b 86 c0 11 00 00 8d 50 fd 83 fa 01 RSP: 0018:ffff999040803b10 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffb9903f496480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff999040803ce0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d21828ac900 R13: 000000000000004a R14: ffff8d2198ed89c0 R15: ffff8d2198ed8000 FS: 0000000000000000(0000) GS:ffff8d24afe80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000429810002 CR4: 00000000001706e0 Call Trace: <TASK> __ieee80211_rx_h_amsdu+0x1b5/0x240 [mac80211] ? ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? __local_bh_enable_ip+0x3b/0xa0 ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? prepare_transfer+0x109/0x1a0 [xhci_hcd] ieee80211_rx_list+0xa80/0xda0 [mac80211] mt76_rx_complete+0x207/0x2e0 [mt76] mt76_rx_poll_complete+0x357/0x5a0 [mt76] mt76u_rx_worker+0x4f5/0x600 [mt76_usb] ? mt76_get_min_avg_rssi+0x140/0x140 [mt76] __mt76_worker_fn+0x50/0x80 [mt76] kthread+0xed/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Since the initialization of rx->link and rx->link_sta is rather convoluted and duplicated in many places, clean it up by using a helper function to set it. [remove unnecessary rx->sta->sta.mlo check]

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Prevent decoding NV12M jpegs into single-planar buffers If the application queues an NV12M jpeg as output buffer, but then queues a single planar capture buffer, the kernel will crash with "Unable to handle kernel NULL pointer dereference" in mxc_jpeg_addrs, prevent this by finishing the job with error.

In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_core: handle NULL result of find_service_by_handle In case of an invalid handle the function find_servive_by_handle returns NULL. So take care of this and avoid a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit.

In the Linux kernel, the following vulnerability has been resolved: ice: fix vsi->txq_map sizing The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter.

In the Linux kernel, the following vulnerability has been resolved: mm: /proc/pid/smaps_rollup: fix no vma's null-deref Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") introduced a null-deref if there are no vma's in the task in show_smaps_rollup.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup The function rxe_create_qp calls rxe_qp_from_init. If some error occurs, the error handler of function rxe_qp_from_init will set both scq and rcq to NULL. Then rxe_create_qp calls rxe_put to handle qp. In the end, rxe_qp_do_cleanup is called by rxe_put. rxe_qp_do_cleanup directly accesses scq and rcq before checking them. This will cause null-ptr-deref error. The call graph is as below: rxe_create_qp { ... rxe_qp_from_init { ... err1: ... qp->rcq = NULL; <---rcq is set to NULL qp->scq = NULL; <---scq is set to NULL ... } qp_init: rxe_put{ ... rxe_qp_do_cleanup { ... atomic_dec(&qp->scq->num_wq); <--- scq is accessed ... atomic_dec(&qp->rcq->num_wq); <--- rcq is accessed } }

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix size validation for non-exclusive domains (v4) Fix amdgpu_bo_validate_size() to check whether the TTM domain manager for the requested memory exists, else we get a kernel oops when dereferencing "man". v2: Make the patch standalone, i.e. not dependent on local patches. v3: Preserve old behaviour and just check that the manager pointer is not NULL. v4: Complain if GTT domain requested and it is uninitialized--most likely a bug.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Fault injection test reports this issue: kernel BUG at net/core/dev.c:10731! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Call Trace: <TASK> wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff] spi_probe+0xe4/0x140 really_probe+0x17e/0x3f0 __driver_probe_device+0xe3/0x170 driver_probe_device+0x49/0x120 The root case here is alloc_ordered_workqueue() fails, but cfg80211_unregister_netdevice() or unregister_netdev() not be called in error handling path. To fix add unregister_netdev goto lable to add the unregister operation in error handling path.

In the Linux kernel, the following vulnerability has been resolved: mmc: moxart: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host().

In the Linux kernel, the following vulnerability has been resolved: drivers/md/md-bitmap: check the return value of md_bitmap_get_counter() Check the return value of md_bitmap_get_counter() in case it returns NULL pointer, which will result in a null pointer dereference. v2: update the check to include other dereference

In the Linux kernel, the following vulnerability has been resolved: arm64: fix oops in concurrently setting insn_emulation sysctls emulation_proc_handler() changes table->data for proc_dointvec_minmax and can generate the following Oops if called concurrently with itself: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 | Internal error: Oops: 96000006 [#1] SMP | Call trace: | update_insn_emulation_mode+0xc0/0x148 | emulation_proc_handler+0x64/0xb8 | proc_sys_call_handler+0x9c/0xf8 | proc_sys_write+0x18/0x20 | __vfs_write+0x20/0x48 | vfs_write+0xe4/0x1d0 | ksys_write+0x70/0xf8 | __arm64_sys_write+0x20/0x28 | el0_svc_common.constprop.0+0x7c/0x1c0 | el0_svc_handler+0x2c/0xa0 | el0_svc+0x8/0x200 To fix this issue, keep the table->data as &insn->current_mode and use container_of() to retrieve the insn pointer. Another mutex is used to protect against the current_mode update but not for retrieving insn_emulation as table->data is no longer changing.

An issue was discovered in the Linux kernel through 5.11.11. synic_get in arch/x86/kvm/hyperv.c has a NULL pointer dereference for certain accesses to the SynIC Hyper-V context, aka CID-919f4ebc5987.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix null-ptr-deref in vkms_release() A null-ptr-deref is triggered when it tries to destroy the workqueue in vkms->output.composer_workq in vkms_release(). KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 5 PID: 17193 Comm: modprobe Not tainted 6.0.0-11331-gd465bff130bf #24 RIP: 0010:destroy_workqueue+0x2f/0x710 ... Call Trace: <TASK> ? vkms_config_debugfs_init+0x50/0x50 [vkms] __devm_drm_dev_alloc+0x15a/0x1c0 [drm] vkms_init+0x245/0x1000 [vkms] do_one_initcall+0xd0/0x4f0 do_init_module+0x1a4/0x680 load_module+0x6249/0x7110 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that an OOM happened which triggers the destroy of the workqueue, however, the workqueue is alloced in the later process, thus a null-ptr-deref happened. A simple call graph is shown as below: vkms_init() vkms_create() devm_drm_dev_alloc() __devm_drm_dev_alloc() devm_drm_dev_init() devm_add_action_or_reset() devm_add_action() # an error happened devm_drm_dev_init_release() drm_dev_put() kref_put() drm_dev_release() vkms_release() destroy_workqueue() # null-ptr-deref happened vkms_modeset_init() vkms_output_init() vkms_crtc_init() # where the workqueue get allocated Fix this by checking if composer_workq is NULL before passing it to the destroy_workqueue() in vkms_release().

In the Linux kernel, the following vulnerability has been resolved: soundwire: revisit driver bind/unbind and callbacks In the SoundWire probe, we store a pointer from the driver ops into the 'slave' structure. This can lead to kernel oopses when unbinding codec drivers, e.g. with the following sequence to remove machine driver and codec driver. /sbin/modprobe -r snd_soc_sof_sdw /sbin/modprobe -r snd_soc_rt711 The full details can be found in the BugLink below, for reference the two following examples show different cases of driver ops/callbacks being invoked after the driver .remove(). kernel: BUG: kernel NULL pointer dereference, address: 0000000000000150 kernel: Workqueue: events cdns_update_slave_status_work [soundwire_cadence] kernel: RIP: 0010:mutex_lock+0x19/0x30 kernel: Call Trace: kernel: ? sdw_handle_slave_status+0x426/0xe00 [soundwire_bus 94ff184bf398570c3f8ff7efe9e32529f532e4ae] kernel: ? newidle_balance+0x26a/0x400 kernel: ? cdns_update_slave_status_work+0x1e9/0x200 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: BUG: unable to handle page fault for address: ffffffffc07654c8 kernel: Workqueue: pm pm_runtime_work kernel: RIP: 0010:sdw_bus_prep_clk_stop+0x6f/0x160 [soundwire_bus] kernel: Call Trace: kernel: <TASK> kernel: sdw_cdns_clock_stop+0xb5/0x1b0 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: intel_suspend_runtime+0x5f/0x120 [soundwire_intel aca858f7c87048d3152a4a41bb68abb9b663a1dd] kernel: ? dpm_sysfs_remove+0x60/0x60 This was not detected earlier in Intel tests since the tests first remove the parent PCI device and shut down the bus. The sequence above is a corner case which keeps the bus operational but without a driver bound. While trying to solve this kernel oopses, it became clear that the existing SoundWire bus does not deal well with the unbind case. Commit 528be501b7d4a ("soundwire: sdw_slave: add probe_complete structure and new fields") added a 'probed' status variable and a 'probe_complete' struct completion. This status is however not reset on remove and likewise the 'probe complete' is not re-initialized, so the bind/unbind/bind test cases would fail. The timeout used before the 'update_status' callback was also a bad idea in hindsight, there should really be no timing assumption as to if and when a driver is bound to a device. An initial draft was based on device_lock() and device_unlock() was tested. This proved too complicated, with deadlocks created during the suspend-resume sequences, which also use the same device_lock/unlock() as the bind/unbind sequences. On a CometLake device, a bad DSDT/BIOS caused spurious resumes and the use of device_lock() caused hangs during suspend. After multiple weeks or testing and painful reverse-engineering of deadlocks on different devices, we looked for alternatives that did not interfere with the device core. A bus notifier was used successfully to keep track of DRIVER_BOUND and DRIVER_UNBIND events. This solved the bind-unbind-bind case in tests, but it can still be defeated with a theoretical corner case where the memory is freed by a .remove while the callback is in use. The notifier only helps make sure the driver callbacks are valid, but not that the memory allocated in probe remains valid while the callbacks are invoked. This patch suggests the introduction of a new 'sdw_dev_lock' mutex protecting probe/remove and all driver callbacks. Since this mutex is 'local' to SoundWire only, it does not interfere with existing locks and does not create deadlocks. In addition, this patch removes the 'probe_complete' completion, instead we directly invoke the 'update_status' from the probe routine. That removes any sort of timing dependency and a much better support for the device/driver model, the driver could be bound before the bus started, or eons after the bus started and the hardware would be properly initialized in all cases. BugLink: https://github.com/thesofproject/linux/is ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix crash on hci_create_cis_sync When attempting to connect multiple ISO sockets without using DEFER_SETUP may result in the following crash: BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0 Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50 CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted 6.0.0-rc7-02243-gb84a13ff4eda #4373 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x19/0x27 kasan_report+0xbc/0xf0 ? hci_create_cis_sync+0x18b/0x2b0 hci_create_cis_sync+0x18b/0x2b0 ? get_link_mode+0xd0/0xd0 ? __ww_mutex_lock_slowpath+0x10/0x10 ? mutex_lock+0xe0/0xe0 ? get_link_mode+0xd0/0xd0 hci_cmd_sync_work+0x111/0x190 process_one_work+0x427/0x650 worker_thread+0x87/0x750 ? process_one_work+0x650/0x650 kthread+0x14e/0x180 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate BOOT record_size When the NTFS BOOT record_size field < 0, it represents a shift value. However, there is no sanity check on the shift result and the sbi->record_bits calculation through blksize_bits() assumes the size always > 256, which could lead to NPD while mounting a malformed NTFS image. [ 318.675159] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 318.675682] #PF: supervisor read access in kernel mode [ 318.675869] #PF: error_code(0x0000) - not-present page [ 318.676246] PGD 0 P4D 0 [ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5 [ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.679848] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.680104] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.680790] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.681679] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.682577] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.683015] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.683618] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 318.684651] CR2: 0000000000000158 CR3: 0000000002e1a000 CR4: 00000000000006f0 [ 318.685623] Call Trace: [ 318.686607] <TASK> [ 318.686872] ? ntfs_alloc_inode+0x1a/0x60 [ 318.687235] attr_load_runs_vcn+0x2b/0xa0 [ 318.687468] mi_read+0xbb/0x250 [ 318.687576] ntfs_iget5+0x114/0xd90 [ 318.687750] ntfs_fill_super+0x588/0x11b0 [ 318.687953] ? put_ntfs+0x130/0x130 [ 318.688065] ? snprintf+0x49/0x70 [ 318.688164] ? put_ntfs+0x130/0x130 [ 318.688256] get_tree_bdev+0x16a/0x260 [ 318.688407] vfs_get_tree+0x20/0xb0 [ 318.688519] path_mount+0x2dc/0x9b0 [ 318.688877] do_mount+0x74/0x90 [ 318.689142] __x64_sys_mount+0x89/0xd0 [ 318.689636] do_syscall_64+0x3b/0x90 [ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 318.690318] RIP: 0033:0x7fd9e133c48a [ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 318.691357] RSP: 002b:00007ffd374406c8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 318.691632] RAX: ffffffffffffffda RBX: 0000564d0b051080 RCX: 00007fd9e133c48a [ 318.691920] RDX: 0000564d0b051280 RSI: 0000564d0b051300 RDI: 0000564d0b0596a0 [ 318.692123] RBP: 0000000000000000 R08: 0000564d0b0512a0 R09: 0000000000000020 [ 318.692349] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564d0b0596a0 [ 318.692673] R13: 0000564d0b051280 R14: 0000000000000000 R15: 00000000ffffffff [ 318.693007] </TASK> [ 318.693271] Modules linked in: [ 318.693614] CR2: 0000000000000158 [ 318.694446] ---[ end trace 0000000000000000 ]--- [ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.696042] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.696531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.698114] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.699286] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.699795] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.700236] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.700973] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix null ndlp ptr dereference in abnormal exit path for GFT_ID An error case exit from lpfc_cmpl_ct_cmd_gft_id() results in a call to lpfc_nlp_put() with a null pointer to a nodelist structure. Changed lpfc_cmpl_ct_cmd_gft_id() to initialize nodelist pointer upon entry.

In the Linux kernel, the following vulnerability has been resolved: kernfs: fix potential NULL dereference in __kernfs_remove When lockdep is enabled, lockdep_assert_held_write would cause potential NULL pointer dereference. Fix the following smatch warnings: fs/kernfs/dir.c:1353 __kernfs_remove() warn: variable dereferenced before check 'kn' (see line 1346)

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Make sure "ib_port" is valid when access sysfs node The "ib_port" structure must be set before adding the sysfs kobject, and reset after removing it, otherwise it may crash when accessing the sysfs node: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Mem abort info: ESR = 0x96000006 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e85f5ba5 [0000000000000050] pgd=0000000848fd9003, pud=000000085b387003, pmd=0000000000000000 Internal error: Oops: 96000006 [#2] PREEMPT SMP Modules linked in: ib_umad(O) mlx5_ib(O) nfnetlink_cttimeout(E) nfnetlink(E) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_nat_ipv6(E) nf_nat_ipv4(E) nf_conncount(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) mst_pciconf(O) ipmi_devintf(E) ipmi_msghandler(E) ipmb_dev_int(OE) mlx5_core(O) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) ib_core(O) mlx_compat(O) psample(E) sbsa_gwdt(E) uio_pdrv_genirq(E) uio(E) mlxbf_pmc(OE) mlxbf_gige(OE) mlxbf_tmfifo(OE) gpio_mlxbf2(OE) pwr_mlxbf(OE) mlx_trio(OE) i2c_mlxbf(OE) mlx_bootctl(OE) bluefield_edac(OE) knem(O) ip_tables(E) ipv6(E) crc_ccitt(E) [last unloaded: mst_pci] Process grep (pid: 3372, stack limit = 0x0000000022055c92) CPU: 5 PID: 3372 Comm: grep Tainted: G D OE 4.19.161-mlnx.47.gadcd9e3 #1 Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.9.2-15-ga2403ab Sep 8 2022 pstate: 40000005 (nZcv daif -PAN -UAO) pc : hw_stat_port_show+0x4c/0x80 [ib_core] lr : port_attr_show+0x40/0x58 [ib_core] sp : ffff000029f43b50 x29: ffff000029f43b50 x28: 0000000019375000 x27: ffff8007b821a540 x26: ffff000029f43e30 x25: 0000000000008000 x24: ffff000000eaa958 x23: 0000000000001000 x22: ffff8007a4ce3000 x21: ffff8007baff8000 x20: ffff8007b9066ac0 x19: ffff8007bae97578 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff8007a4ce4000 x7 : 0000000000000000 x6 : 000000000000003f x5 : ffff000000e6a280 x4 : ffff8007a4ce3000 x3 : 0000000000000000 x2 : aaaaaaaaaaaaaaab x1 : ffff8007b9066a10 x0 : ffff8007baff8000 Call trace: hw_stat_port_show+0x4c/0x80 [ib_core] port_attr_show+0x40/0x58 [ib_core] sysfs_kf_seq_show+0x8c/0x150 kernfs_seq_show+0x44/0x50 seq_read+0x1b4/0x45c kernfs_fop_read+0x148/0x1d8 __vfs_read+0x58/0x180 vfs_read+0x94/0x154 ksys_read+0x68/0xd8 __arm64_sys_read+0x28/0x34 el0_svc_common+0x88/0x18c el0_svc_handler+0x78/0x94 el0_svc+0x8/0xe8 Code: f2955562 aa1603e4 aa1503e0 f9405683 (f9402861)

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value The return value of acpi_fetch_acpi_dev() could be NULL, which would cause a NULL pointer dereference to occur in acpi_device_hid(). [ rjw: Subject and changelog edits, added empty line after if () ]

In the Linux kernel, the following vulnerability has been resolved: mtd: lpddr2_nvm: Fix possible null-ptr-deref It will cause null-ptr-deref when resource_size(add_range) invoked, if platform_get_resource() returns NULL.

In the Linux kernel, the following vulnerability has been resolved: net: sched: sfb: fix null pointer access issue when sfb_init() fails When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: megachips: Fix a null pointer dereference bug When removing the module we will get the following warning: [ 31.911505] i2c-core: driver [stdp2690-ge-b850v3-fw] unregistered [ 31.912484] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI [ 31.913338] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 31.915280] RIP: 0010:drm_bridge_remove+0x97/0x130 [ 31.921825] Call Trace: [ 31.922533] stdp4028_ge_b850v3_fw_remove+0x34/0x60 [megachips_stdpxxxx_ge_b850v3_fw] [ 31.923139] i2c_device_remove+0x181/0x1f0 The two bridges (stdp2690, stdp4028) do not probe at the same time, so the driver does not call ge_b850v3_resgiter() when probing, causing the driver to try to remove the object that has not been initialized. Fix this by checking whether both the bridges are probed.

In the Linux kernel, the following vulnerability has been resolved: vme: Fix error not catched in fake_init() In fake_init(), __root_device_register() is possible to fail but it's ignored, which can cause unregistering vme_root fail when exit. general protection fault, probably for non-canonical address 0xdffffc000000008c KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467] RIP: 0010:root_device_unregister+0x26/0x60 Call Trace: <TASK> __x64_sys_delete_module+0x34f/0x540 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Return error when __root_device_register() fails.

In the Linux kernel, the following vulnerability has been resolved: media: coda: Add check for dcoda_iram_alloc As the coda_iram_alloc may return NULL pointer, it should be better to check the return value in order to avoid NULL poineter dereference, same as the others.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix null pointer dereference in blk_mq_clear_rq_mapping() Our syzkaller report a null pointer dereference, root cause is following: __blk_mq_alloc_map_and_rqs set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs blk_mq_alloc_map_and_rqs blk_mq_alloc_rqs // failed due to oom alloc_pages_node // set->tags[hctx_idx] is still NULL blk_mq_free_rqs drv_tags = set->tags[hctx_idx]; // null pointer dereference is triggered blk_mq_clear_rq_mapping(drv_tags, ...) This is because commit 63064be150e4 ("blk-mq: Add blk_mq_alloc_map_and_rqs()") merged the two steps: 1) set->tags[hctx_idx] = blk_mq_alloc_rq_map() 2) blk_mq_alloc_rqs(..., set->tags[hctx_idx]) into one step: set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs() Since tags is not initialized yet in this case, fix the problem by checking if tags is NULL pointer in blk_mq_clear_rq_mapping().

In the Linux kernel, the following vulnerability has been resolved: io_uring/msg_ring: Fix NULL pointer dereference in io_msg_send_fd() Syzkaller produced the below call trace: BUG: KASAN: null-ptr-deref in io_msg_ring+0x3cb/0x9f0 Write of size 8 at addr 0000000000000070 by task repro/16399 CPU: 0 PID: 16399 Comm: repro Not tainted 6.1.0-rc1 #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_msg_ring+0x3cb/0x9f0 kasan_report+0xbc/0xf0 ? io_msg_ring+0x3cb/0x9f0 kasan_check_range+0x140/0x190 io_msg_ring+0x3cb/0x9f0 ? io_msg_ring_prep+0x300/0x300 io_issue_sqe+0x698/0xca0 io_submit_sqes+0x92f/0x1c30 __do_sys_io_uring_enter+0xae4/0x24b0 .... RIP: 0033:0x7f2eaf8f8289 RSP: 002b:00007fff40939718 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2eaf8f8289 RDX: 0000000000000000 RSI: 0000000000006f71 RDI: 0000000000000004 RBP: 00007fff409397a0 R08: 0000000000000000 R09: 0000000000000039 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004006d0 R13: 00007fff40939880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... We don't have a NULL check on file_ptr in io_msg_send_fd() function, so when file_ptr is NUL src_file is also NULL and get_file() dereferences a NULL pointer and leads to above crash. Add a NULL check to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix NULL-pointer dereferences There are several places where we can crash the kernel by requesting lines, unbinding the GPIO device, then calling any of the system calls relevant to the GPIO character device's annonymous file descriptors: ioctl(), read(), poll(). While I observed it with the GPIO simulator, it will also happen for any of the GPIO devices that can be hot-unplugged - for instance any HID GPIO expander (e.g. CP2112). This affects both v1 and v2 uAPI. This fixes it partially by checking if gdev->chip is not NULL but it doesn't entirely remedy the situation as we still have a race condition in which another thread can remove the device after the check.

In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer() Wei Chen reports a kernel bug as blew: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] ... Call Trace: <TASK> __i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109 i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170 i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297 i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd834a8bded In az6027_i2c_xfer(), if msg[i].addr is 0x99, a null-ptr-deref will caused when accessing msg[i].buf. For msg[i].len is 0 and msg[i].buf is null. Fix this by checking msg[i].len in az6027_i2c_xfer().

In the Linux kernel, the following vulnerability has been resolved: i2c: mux: reg: check return value after calling platform_get_resource() It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Can't set dst buffer to done when lat decode error Core thread will call v4l2_m2m_buf_done to set dst buffer done for lat architecture. If lat call v4l2_m2m_buf_done_and_job_finish to free dst buffer when lat decode error, core thread will access kernel NULL pointer dereference, then crash.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() Fix a NULL pointer crash that occurs when we are freeing the socket at the same time we access it via sysfs. The problem is that: 1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold() does a get on the "struct sock". 2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put on the "struct socket" and that does __sock_release() which sets the sock->ops to NULL. 3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then call kernel_getpeername() which accesses the NULL sock->ops. Above we do a get on the "struct sock", but we needed a get on the "struct socket". Originally, we just held the frwd_lock the entire time but in commit bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()") we switched to refcount based because the network layer changed and started taking a mutex in that path, so we could no longer hold the frwd_lock. Instead of trying to maintain multiple refcounts, this just has us use a mutex for accessing the socket in the interface code paths.

In the Linux kernel, the following vulnerability has been resolved: iio: light: isl29028: Fix the warning in isl29028_remove() The driver use the non-managed form of the register function in isl29028_remove(). To keep the release order as mirroring the ordering in probe, the driver should use non-managed form in probe, too. The following log reveals it: [ 32.374955] isl29028 0-0010: remove [ 32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI [ 32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0 [ 32.385461] Call Trace: [ 32.385807] sysfs_unmerge_group+0x59/0x110 [ 32.386110] dpm_sysfs_remove+0x58/0xc0 [ 32.386391] device_del+0x296/0xe50 [ 32.386959] cdev_device_del+0x1d/0xd0 [ 32.387231] devm_iio_device_unreg+0x27/0xb0 [ 32.387542] devres_release_group+0x319/0x3d0 [ 32.388162] i2c_device_remove+0x93/0x1f0

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Validate the box size for the snooped cursor Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor.

In the Linux kernel, the following vulnerability has been resolved: power: supply: fix null pointer dereferencing in power_supply_get_battery_info when kmalloc() fail to allocate memory in kasprintf(), propname will be NULL, strcmp() called by of_get_property() will cause null pointer dereference. So return ENOMEM if kasprintf() return NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path, besides, led_classdev_unregister() and pm_runtime_disable() also need be called.

In the Linux kernel, the following vulnerability has been resolved: mmc: wmt-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, clk_disable_unprepare() also needs be called.

In the Linux kernel, the following vulnerability has been resolved: net/tunnel: wait until all sk_user_data reader finish before releasing the sock There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 #10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a #16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock.

In the Linux kernel, the following vulnerability has been resolved: virtio-gpu: fix a missing check to avoid NULL dereference 'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset() and it will lead to a NULL dereference by a lately use of it (i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check. [ kraxel: minor codestyle fixup ]

In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

In the Linux kernel, the following vulnerability has been resolved: parisc: led: Fix potential null-ptr-deref in start_task() start_task() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: start_task() create_singlethread_workqueue() # failed, led_wq is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL.