In the Linux kernel, the following vulnerability has been resolved: x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL Baoquan reported that after triggering a crash the subsequent crash-kernel fails to boot about half of the time. It triggers a NULL pointer dereference in the periodic tick code. This happens because the legacy timer interrupt (IRQ0) is resent in software which happens in soft interrupt (tasklet) context. In this context get_irq_regs() returns NULL which leads to the NULL pointer dereference. The reason for the resend is a spurious APIC interrupt on the IRQ0 vector which is captured and leads to a resend when the legacy timer interrupt is enabled. This is wrong because the legacy PIC interrupts are level triggered and therefore should never be resent in software, but nothing ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not know about their trigger type. Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.

In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume When the optional PRE_COPY support was added to speed up the device compatibility check, it failed to update the saving/resuming data pointers based on the fd offset. This results in migration data corruption and when the device gets started on the destination the following error is reported in some cases, [ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: [ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010 [ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f [ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found [ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found [ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before sending a command [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] For functions that execute within a DC context or DC lock we can wrap the direct calls to dm_execute_dmub_cmd/list with code that exits idle power optimizations and reallows once we're done with the command submission on success. For DM direct submissions the DM will need to manage the enter/exit sequencing manually. We cannot invoke a DMCUB command directly within the DM execution helper or we can deadlock.

In the Linux kernel, the following vulnerability has been resolved: drm/panel: fix a possible null pointer dereference In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c Before using list_first_entry, make sure to check that list is not empty, if list is empty return -ENODATA. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1347 kfd_create_indirect_link_prop() warn: can 'gpu_link' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1428 kfd_add_peer_prop() warn: can 'iolink1' even be NULL? drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1433 kfd_add_peer_prop() warn: can 'iolink2' even be NULL?

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix a race condition of vram buffer unref in svm code prange->svm_bo unref can happen in both mmu callback and a callback after migrate to system ram. Both are async call in different tasks. Sync svm_bo unref operation to avoid random "use-after-free".

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix memory leaks When hci_cmd_sync_queue() failed in hci_le_terminate_big() or hci_le_big_terminate(), the memory pointed by variable d is not freed, which will cause memory leak. Add release process to error path.

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug callbacks after the device has been unregistered, leading to fireworks when we try to execute empty function callbacks within the driver: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G W O 5.12.0-rc4+ #1 | Hardware name: , BIOS KpxxxFPGA 1P B600 V143 04/22/2021 | pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) | pc : perf_pmu_migrate_context+0x98/0x38c | lr : perf_pmu_migrate_context+0x94/0x38c | | Call trace: | perf_pmu_migrate_context+0x98/0x38c | hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu] Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been unregistered. [will: Rewrote commit message]

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using.

In the Linux kernel, the following vulnerability has been resolved: iio: core: fix memleak in iio_device_register_sysfs When iio_device_register_sysfs_group() fails, we should free iio_dev_opaque->chan_attr_group.attrs to prevent potential memleak.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: amd: Fix memory leak in amd_sof_acp_probe() Driver uses kasprintf() to initialize fw_{code,data}_bin members of struct acp_dev_data, but kfree() is never called to deallocate the memory, which results in a memory leak. Fix the issue by switching to devm_kasprintf(). Additionally, ensure the allocation was successful by checking the pointer validity.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential NULL dereference Fix potential NULL dereference, in the case when "man", the resource manager might be NULL, when/if we print debug information.

In the Linux kernel, the following vulnerability has been resolved: iommu/iova: Fix alloc iova overflows issue In __alloc_and_insert_iova_range, there is an issue that retry_pfn overflows. The value of iovad->anchor.pfn_hi is ~0UL, then when iovad->cached_node is iovad->anchor, curr_iova->pfn_hi + 1 will overflow. As a result, if the retry logic is executed, low_pfn is updated to 0, and then new_pfn < low_pfn returns false to make the allocation successful. This issue occurs in the following two situations: 1. The first iova size exceeds the domain size. When initializing iova domain, iovad->cached_node is assigned as iovad->anchor. For example, the iova domain size is 10M, start_pfn is 0x1_F000_0000, and the iova size allocated for the first time is 11M. The following is the log information, new->pfn_lo is smaller than iovad->cached_node. Example log as follows: [ 223.798112][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range start_pfn:0x1f0000,retry_pfn:0x0,size:0xb00,limit_pfn:0x1f0a00 [ 223.799590][T1705487] sh: [name:iova&]__alloc_and_insert_iova_range success start_pfn:0x1f0000,new->pfn_lo:0x1efe00,new->pfn_hi:0x1f08ff 2. The node with the largest iova->pfn_lo value in the iova domain is deleted, iovad->cached_node will be updated to iovad->anchor, and then the alloc iova size exceeds the maximum iova size that can be allocated in the domain. After judging that retry_pfn is less than limit_pfn, call retry_pfn+1 to fix the overflow issue.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix possible memory leak in ovs_meter_cmd_set() old_meter needs to be free after it is detached regardless of whether the new meter is successfully attached.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential memory leaks in session setup Make sure to free cifs_ses::auth_key.response before allocating it as we might end up leaking memory in reconnect or mounting.

In the Linux kernel, the following vulnerability has been resolved: io_uring: lock overflowing for IOPOLL syzbot reports an issue with overflow filling for IOPOLL: WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0 Workqueue: events_unbound io_ring_exit_work Call trace:  io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734  io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773  io_fill_cqe_req io_uring/io_uring.h:168 [inline]  io_do_iopoll+0x474/0x62c io_uring/rw.c:1065  io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513  io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056  io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869  process_one_work+0x2d8/0x504 kernel/workqueue.c:2289  worker_thread+0x340/0x610 kernel/workqueue.c:2436  kthread+0x12c/0x158 kernel/kthread.c:376  ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863 There is no real problem for normal IOPOLL as flush is also called with uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL, for which __io_cqring_overflow_flush() happens from the CQ waiting path.

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: mux: Add check and kfree for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Moreover, use kfree() in the later error handling in order to avoid memory leak.

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved Adding a reserved memory region for the framebuffer memory (the splash memory region set up by the bootloader). It fixes a kernel panic (arm-smmu: Unhandled context fault at this particular memory region) reported on DB845c running v5.10.y.

In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: don't reissue in case of poll race on multishot request A previous commit fixed a poll race that can occur, but it's only applicable for multishot requests. For a multishot request, we can safely ignore a spurious wakeup, as we never leave the waitqueue to begin with. A blunt reissue of a multishot armed request can cause us to leak a buffer, if they are ring provided. While this seems like a bug in itself, it's not really defined behavior to reissue a multishot request directly. It's less efficient to do so as well, and not required to rearm anything like it is for singleshot poll requests.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate() In Google internal bug 265639009 we've received an (as yet) unreproducible crash report from an aarch64 GKI 5.10.149-android13 running device. AFAICT the source code is at: https://android.googlesource.com/kernel/common/+/refs/tags/ASB-2022-12-05_13-5.10 The call stack is: ncm_close() -> ncm_notify() -> ncm_do_notify() with the crash at: ncm_do_notify+0x98/0x270 Code: 79000d0b b9000a6c f940012a f9400269 (b9405d4b) Which I believe disassembles to (I don't know ARM assembly, but it looks sane enough to me...): // halfword (16-bit) store presumably to event->wLength (at offset 6 of struct usb_cdc_notification) 0B 0D 00 79 strh w11, [x8, #6] // word (32-bit) store presumably to req->Length (at offset 8 of struct usb_request) 6C 0A 00 B9 str w12, [x19, #8] // x10 (NULL) was read here from offset 0 of valid pointer x9 // IMHO we're reading 'cdev->gadget' and getting NULL // gadget is indeed at offset 0 of struct usb_composite_dev 2A 01 40 F9 ldr x10, [x9] // loading req->buf pointer, which is at offset 0 of struct usb_request 69 02 40 F9 ldr x9, [x19] // x10 is null, crash, appears to be attempt to read cdev->gadget->max_speed 4B 5D 40 B9 ldr w11, [x10, #0x5c] which seems to line up with ncm_do_notify() case NCM_NOTIFY_SPEED code fragment: event->wLength = cpu_to_le16(8); req->length = NCM_STATUS_BYTECOUNT; /* SPEED_CHANGE data is up/down speeds in bits/sec */ data = req->buf + sizeof *event; data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); My analysis of registers and NULL ptr deref crash offset (Unable to handle kernel NULL pointer dereference at virtual address 000000000000005c) heavily suggests that the crash is due to 'cdev->gadget' being NULL when executing: data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget)); which calls: ncm_bitrate(NULL) which then calls: gadget_is_superspeed(NULL) which reads ((struct usb_gadget *)NULL)->max_speed and hits a panic. AFAICT, if I'm counting right, the offset of max_speed is indeed 0x5C. (remember there's a GKI KABI reservation of 16 bytes in struct work_struct) It's not at all clear to me how this is all supposed to work... but returning 0 seems much better than panic-ing...

In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap() Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()' should check the return value before examining skb data. So convert the latter to return an appropriate error code and propagate it to return from 'wfx_start_ap()' as well. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: another fix for the headless Adreno GPU Fix another oops reproducible when rebooting the board with the Adreno GPU working in the headless mode (e.g. iMX platforms). Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=74936831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 51 Comm: reboot Not tainted 6.2.0-rc1-dirty #11 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at msm_atomic_commit_tail+0x50/0x970 LR is at commit_tail+0x9c/0x188 pc : [<c06aa430>] lr : [<c067a214>] psr: 600e0013 sp : e0851d30 ip : ee4eb7eb fp : 00090acc r10: 00000058 r9 : c2193014 r8 : c4310000 r7 : c4759380 r6 : 07bef61d r5 : 00000000 r4 : 00000000 r3 : c44cc440 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 74910019 DAC: 00000051 Register r0 information: NULL pointer Register r1 information: NULL pointer Register r2 information: NULL pointer Register r3 information: slab kmalloc-1k start c44cc400 pointer offset 64 size 1024 Register r4 information: NULL pointer Register r5 information: NULL pointer Register r6 information: non-paged memory Register r7 information: slab kmalloc-128 start c4759380 pointer offset 0 size 128 Register r8 information: slab kmalloc-2k start c4310000 pointer offset 0 size 2048 Register r9 information: non-slab/vmalloc memory Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process reboot (pid: 51, stack limit = 0xc80046d9) Stack: (0xe0851d30 to 0xe0852000) 1d20: c4759380 fbd77200 000005ff 002b9c70 1d40: c4759380 c4759380 00000000 07bef61d 00000600 c0d6fe7c c2193014 00000058 1d60: 00090acc c067a214 00000000 c4759380 c4310000 00000000 c44cc854 c067a89c 1d80: 00000000 00000000 00000000 c4310468 00000000 c4759380 c4310000 c4310468 1da0: c4310470 c0643258 c4759380 00000000 00000000 c0c4ee24 00000000 c44cc810 1dc0: 00000000 c0c4ee24 00000000 c44cc810 00000000 0347d2a8 e0851e00 e0851e00 1de0: c4759380 c067ad20 c4310000 00000000 c44cc810 c27f8718 c44cc854 c067adb8 1e00: c4933000 00000002 00000001 00000000 00000000 c2130850 00000000 c2130854 1e20: c25fc488 00000000 c0ff162c 00000000 00000001 00000002 00000000 00000000 1e40: c43102c0 c43102c0 00000000 0347d2a8 c44cc810 c44cc814 c2133da8 c06d1a60 1e60: 00000000 00000000 00079028 c2012f24 fee1dead c4933000 00000058 c01431e4 1e80: 01234567 c0143a20 00000000 00000000 00000000 00000000 00000000 00000000 1ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f80: 00000000 00000000 00000000 0347d2a8 00000002 00000004 00000078 00000058 1fa0: c010028c c0100060 00000002 00000004 fee1dead 28121969 01234567 00079028 1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc 1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6 600e0030 fee1dead 00000000 00000000 msm_atomic_commit_tail from commit_tail+0x9c/0x188 commit_tail from drm_atomic_helper_commit+0x160/0x188 drm_atomic_helper_commit from drm_atomic_commit+0xac/0xe0 drm_atomic_commit from drm_atomic_helper_disable_all+0x1b0/0x1c0 drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x88/0x140 drm_atomic_helper_shutdown from device_shutdown+0x16c/0x240 device_shutdown from kernel_restart+0x38/0x90 kernel_restart from __do_sys_reboot+0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix a memory leak with reused mmap_offset drm_vma_node_allow() and drm_vma_node_revoke() should be called in balanced pairs. We call drm_vma_node_allow() once per-file everytime a user calls mmap_offset, but only call drm_vma_node_revoke once per-file on each mmap_offset. As the mmap_offset is reused by the client, the per-file vm_count may remain non-zero and the rbtree leaked. Call drm_vma_node_allow_once() instead to prevent that memory leak.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix flow memory leak in ovs_flow_cmd_new Syzkaller reports a memory leak of new_flow in ovs_flow_cmd_new() as it is not freed when an allocation of a key fails. BUG: memory leak unreferenced object 0xffff888116668000 (size 632): comm "syz-executor231", pid 1090, jiffies 4294844701 (age 18.871s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000defa3494>] kmem_cache_zalloc include/linux/slab.h:654 [inline] [<00000000defa3494>] ovs_flow_alloc+0x19/0x180 net/openvswitch/flow_table.c:77 [<00000000c67d8873>] ovs_flow_cmd_new+0x1de/0xd40 net/openvswitch/datapath.c:957 [<0000000010a539a8>] genl_family_rcv_msg_doit+0x22d/0x330 net/netlink/genetlink.c:739 [<00000000dff3302d>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000dff3302d>] genl_rcv_msg+0x328/0x590 net/netlink/genetlink.c:800 [<000000000286dd87>] netlink_rcv_skb+0x153/0x430 net/netlink/af_netlink.c:2515 [<0000000061fed410>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009dc0f111>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] [<000000009dc0f111>] netlink_unicast+0x545/0x7f0 net/netlink/af_netlink.c:1339 [<000000004a5ee816>] netlink_sendmsg+0x8e7/0xde0 net/netlink/af_netlink.c:1934 [<00000000482b476f>] sock_sendmsg_nosec net/socket.c:651 [inline] [<00000000482b476f>] sock_sendmsg+0x152/0x190 net/socket.c:671 [<00000000698574ba>] ____sys_sendmsg+0x70a/0x870 net/socket.c:2356 [<00000000d28d9e11>] ___sys_sendmsg+0xf3/0x170 net/socket.c:2410 [<0000000083ba9120>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 [<00000000c00628f8>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 [<000000004abfdcf4>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 To fix this the patch rearranges the goto labels to reflect the order of object allocations and adds appropriate goto statements on the error paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: HV: hv_balloon: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: tracing: Have trace_event_file have ref counters The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor.

In the Linux kernel, the following vulnerability has been resolved: acpi: Fix suspend with Xen PV Commit f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") missed one code path accessing real_mode_header, leading to dereferencing NULL when suspending the system under Xen: [ 348.284004] PM: suspend entry (deep) [ 348.289532] Filesystems sync: 0.005 seconds [ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 348.292457] OOM killer disabled. [ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug) [ 348.749228] PM: suspend devices took 0.352 seconds [ 348.769713] ACPI: EC: interrupt blocked [ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 348.816080] #PF: supervisor read access in kernel mode [ 348.816081] #PF: error_code(0x0000) - not-present page [ 348.816083] PGD 0 P4D 0 [ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1 [ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022 [ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20 Fix that by adding an optional acpi callback allowing to skip setting the wakeup address, as in the Xen PV case this will be handled by the hypervisor anyway.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range When running an SVA case, the following soft lockup is triggered: -------------------------------------------------------------------- watchdog: BUG: soft lockup - CPU#244 stuck for 26s! pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50 sp : ffff8000d83ef290 x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000 x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000 x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0 x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0 x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 __arm_smmu_tlb_inv_range+0x118/0x254 arm_smmu_tlb_inv_range_asid+0x6c/0x130 arm_smmu_mm_invalidate_range+0xa0/0xa4 __mmu_notifier_invalidate_range_end+0x88/0x120 unmap_vmas+0x194/0x1e0 unmap_region+0xb4/0x144 do_mas_align_munmap+0x290/0x490 do_mas_munmap+0xbc/0x124 __vm_munmap+0xa8/0x19c __arm64_sys_munmap+0x28/0x50 invoke_syscall+0x78/0x11c el0_svc_common.constprop.0+0x58/0x1c0 do_el0_svc+0x34/0x60 el0_svc+0x2c/0xd4 el0t_64_sync_handler+0x114/0x140 el0t_64_sync+0x1a4/0x1a8 -------------------------------------------------------------------- Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains. The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called typically next to MMU tlb flush function, e.g. tlb_flush_mmu_tlbonly { tlb_flush { __flush_tlb_range { // check MAX_TLBI_OPS } } mmu_notifier_arch_invalidate_secondary_tlbs { arm_smmu_mm_arch_invalidate_secondary_tlbs { // does not check MAX_TLBI_OPS } } } Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an SVA case SMMU uses the CPU page table, so it makes sense to align with the tlbflush code. Then, replace per-page TLBI commands with a single per-asid TLBI command, if the request size hits this threshold.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check endpoint is valid before dereferencing it When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix possible deadlock in rfcomm_sk_state_change syzbot reports a possible deadlock in rfcomm_sk_state_change [1]. While rfcomm_sock_connect acquires the sk lock and waits for the rfcomm lock, rfcomm_sock_release could have the rfcomm lock and hit a deadlock for acquiring the sk lock. Here's a simplified flow: rfcomm_sock_connect: lock_sock(sk) rfcomm_dlc_open: rfcomm_lock() rfcomm_sock_release: rfcomm_sock_shutdown: rfcomm_lock() __rfcomm_dlc_close: rfcomm_k_state_change: lock_sock(sk) This patch drops the sk lock before calling rfcomm_dlc_open to avoid the possible deadlock and holds sk's reference count to prevent use-after-free after rfcomm_dlc_open completes.

In the Linux kernel, the following vulnerability has been resolved: ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data() Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself.

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix possible NULL pointer dereference in send_acknowledge() Handle memory allocation failure from nci_skb_alloc() (calling alloc_skb()) to avoid possible NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: powerpc/lib: Validate size for vector operations Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption.

In the Linux kernel, the following vulnerability has been resolved: pstore/platform: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: netfs: Only call folio_start_fscache() one time for each folio If a network filesystem using netfs implements a clamp_length() function, it can set subrequest lengths smaller than a page size. When we loop through the folios in netfs_rreq_unlock_folios() to set any folios to be written back, we need to make sure we only call folio_start_fscache() once for each folio. Otherwise, this simple testcase: mount -o fsc,rsize=1024,wsize=1024 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file.bin bs=4096 count=1 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.0126359 s, 324 kB/s echo 3 > /proc/sys/vm/drop_caches cat /mnt/nfs/file.bin > /dev/null will trigger an oops similar to the following: page dumped because: VM_BUG_ON_FOLIO(folio_test_private_2(folio)) ------------[ cut here ]------------ kernel BUG at include/linux/netfs.h:44! ... CPU: 5 PID: 134 Comm: kworker/u16:5 Kdump: loaded Not tainted 6.4.0-rc5 ... RIP: 0010:netfs_rreq_unlock_folios+0x68e/0x730 [netfs] ... Call Trace: netfs_rreq_assess+0x497/0x660 [netfs] netfs_subreq_terminated+0x32b/0x610 [netfs] nfs_netfs_read_completion+0x14e/0x1a0 [nfs] nfs_read_completion+0x2f9/0x330 [nfs] rpc_free_task+0x72/0xa0 [sunrpc] rpc_async_release+0x46/0x70 [sunrpc] process_one_work+0x3bd/0x710 worker_thread+0x89/0x610 kthread+0x181/0x1c0 ret_from_fork+0x29/0x50

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame() Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803)

In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME.

In the Linux kernel, the following vulnerability has been resolved: i915/perf: Fix NULL deref bugs with drm_dbg() calls When i915 perf interface is not available dereferencing it will lead to NULL dereferences. As returning -ENOTSUPP is pretty clear return when perf interface is not available. [tursulin: added stable tag] (cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889)

In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length needs to be aligned with block size Before calling add partition or resize partition, there is no check on whether the length is aligned with the logical block size. If the logical block size of the disk is larger than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the read command is smaller than the logical block size.If integrity data is supported, this will also result in a null pointer dereference when calling bio_integrity_free.

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length If the host sends an H2CData command with an invalid DATAL, the kernel may crash in nvmet_tcp_build_pdu_iovec(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Call trace: process_one_work+0x174/0x3c8 worker_thread+0x2d0/0x3e8 kthread+0x104/0x110 Fix the bug by raising a fatal error if DATAL isn't coherent with the packet size. Also, the PDU length should never exceed the MAXH2CDATA parameter which has been communicated to the host in nvmet_tcp_handle_icreq().

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix possible null-ptr-deref when assigning a stream While AudioDSP drivers assign streams exclusively of HOST or LINK type, nothing blocks a user to attempt to assign a COUPLED stream. As supplied substream instance may be a stub, what is the case when code-loading, such scenario ends with null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix memory leak in hci_update_adv_data() When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR to pass the instance to callback so no memory needs to be allocated.

In the Linux kernel, the following vulnerability has been resolved: tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING syzbot reported the following uninit-value access issue [1]: ===================================================== BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline] BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756 strlen lib/string.c:418 [inline] strstr+0xb8/0x2f0 lib/string.c:756 tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595 genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline] genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline] netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd TIPC bearer-related names including link names must be null-terminated strings. If a link name which is not null-terminated is passed through netlink, strstr() and similar functions can cause buffer overrun. This causes the above issue. This patch changes the nla_policy for bearer-related names from NLA_STRING to NLA_NUL_STRING. This resolves the issue by ensuring that only null-terminated strings are accepted as bearer-related names. syzbot reported similar uninit-value issue related to bearer names [2]. The root cause of this issue is that a non-null-terminated bearer name was passed. This patch also resolved this issue.

In the Linux kernel, the following vulnerability has been resolved: powerpc/47x: Fix 47x syscall return crash Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP:  b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400   Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR:  00000030 <IR,DR>  CR: 00001000  XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01173cc ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles.