In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Add check for kzalloc As kzalloc may fail and return NULL pointer, it should be better to check the return value in order to avoid the NULL pointer dereference. Patchwork: https://patchwork.freedesktop.org/patch/514154/

In the Linux kernel, the following vulnerability has been resolved: net/smc: Reset connection when trying to use SMCRv2 fails. We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port> BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ? __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ? __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr: create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration.

In the Linux kernel, the following vulnerability has been resolved: trace_events_hist: add check for return value of 'create_hist_field' Function 'create_hist_field' is called recursively at trace_events_hist.c:1954 and can return NULL-value that's why we have to check it to avoid null pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net/handshake: fix null-ptr-deref in handshake_nl_done_doit() We should not call trace_handshake_cmd_done_err() if socket lookup has failed. Also we should call trace_handshake_cmd_done_err() before releasing the file, otherwise dereferencing sock->sk can return garbage. This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable") Unable to handle kernel paging request at virtual address dfff800000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfff800000000003] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 lr : handshake_nl_done_doit+0x180/0x9c8 sp : ffff800096e37180 x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000 x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8 x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000 x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000 x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001 x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003 x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078 x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000 Call trace: handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline] genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x56c/0x840 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908)

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Synchronize the IOCB count to be in order A system hang was observed with the following call trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 15 PID: 86747 Comm: nvme Kdump: loaded Not tainted 6.2.0+ #1 Hardware name: Dell Inc. PowerEdge R6515/04F3CJ, BIOS 2.7.3 03/31/2022 RIP: 0010:__wake_up_common+0x55/0x190 Code: 41 f6 01 04 0f 85 b2 00 00 00 48 8b 43 08 4c 8d 40 e8 48 8d 43 08 48 89 04 24 48 89 c6\ 49 8d 40 18 48 39 c6 0f 84 e9 00 00 00 <49> 8b 40 18 89 6c 24 14 31 ed 4c 8d 60 e8 41 8b 18 f6 c3 04 75 5d RSP: 0018:ffffb05a82afbba0 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8f9b83a00018 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8f9b83a00020 RDI: ffff8f9b83a00018 RBP: 0000000000000001 R08: ffffffffffffffe8 R09: ffffb05a82afbbf8 R10: 70735f7472617473 R11: 5f30307832616c71 R12: 0000000000000001 R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f815cf4c740(0000) GS:ffff8f9eeed80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010633a000 CR4: 0000000000350ee0 Call Trace: <TASK> __wake_up_common_lock+0x83/0xd0 qla_nvme_ls_req+0x21b/0x2b0 [qla2xxx] __nvme_fc_send_ls_req+0x1b5/0x350 [nvme_fc] nvme_fc_xmt_disconnect_assoc+0xca/0x110 [nvme_fc] nvme_fc_delete_association+0x1bf/0x220 [nvme_fc] ? nvme_remove_namespaces+0x9f/0x140 [nvme_core] nvme_do_delete_ctrl+0x5b/0xa0 [nvme_core] nvme_sysfs_delete+0x5f/0x70 [nvme_core] kernfs_fop_write_iter+0x12b/0x1c0 vfs_write+0x2a3/0x3b0 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_loop+0xd0/0x130 ? exit_to_user_mode_prepare+0xec/0x100 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f815cd3eb97 The IOCB counts are out of order and that would block any commands from going out and subsequently hang the system. Synchronize the IOCB count to be in correct order.

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix null pointer deref when receiving skb during sock creation The panic below is observed when receiving ICMP packets with secmark set while an ICMP raw socket is being created. SK_CTX(sk)->label is updated in apparmor_socket_post_create(), but the packet is delivered to the socket before that, causing the null pointer dereference. Drop the packet if label context is not set. BUG: kernel NULL pointer dereference, address: 000000000000004c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020 RIP: 0010:aa_label_next_confined+0xb/0x40 Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2 RSP: 0018:ffffa92940003b08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002 R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? aa_label_next_confined+0xb/0x40 apparmor_secmark_check+0xec/0x330 security_sock_rcv_skb+0x35/0x50 sk_filter_trim_cap+0x47/0x250 sock_queue_rcv_skb_reason+0x20/0x60 raw_rcv+0x13c/0x210 raw_local_deliver+0x1f3/0x250 ip_protocol_deliver_rcu+0x4f/0x2f0 ip_local_deliver_finish+0x76/0xa0 __netif_receive_skb_one_core+0x89/0xa0 netif_receive_skb+0x119/0x170 ? __netdev_alloc_skb+0x3d/0x140 vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] __napi_poll+0x28/0x1b0 net_rx_action+0x2a4/0x380 __do_softirq+0xd1/0x2c8 __irq_exit_rcu+0xbb/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 RIP: 0010:apparmor_socket_post_create+0xb/0x200 Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48 RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286 RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003 R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748 ? __pfx_apparmor_socket_post_create+0x10/0x10 security_socket_post_create+0x4b/0x80 __sock_create+0x176/0x1f0 __sys_socket+0x89/0x100 __x64_sys_socket+0x17/0x20 do_syscall_64+0x5d/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap() Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()' should check the return value before examining skb data. So convert the latter to return an appropriate error code and propagate it to return from 'wfx_start_ap()' as well. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: Revert "tty: n_gsm: fix UAF in gsm_cleanup_mux" This reverts commit 9b9c8195f3f0d74a826077fc1c01b9ee74907239. The commit above is reverted as it did not solve the original issue. gsm_cleanup_mux() tries to free up the virtual ttys by calling gsm_dlci_release() for each available DLCI. There, dlci_put() is called to decrease the reference counter for the DLCI via tty_port_put() which finally calls gsm_dlci_free(). This already clears the pointer which is being checked in gsm_cleanup_mux() before calling gsm_dlci_release(). Therefore, it is not necessary to clear this pointer in gsm_cleanup_mux() as done in the reverted commit. The commit introduces a null pointer dereference: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x156/0x420 ? search_exception_tables+0x37/0x50 ? fixup_exception+0x21/0x310 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? tty_port_put+0x19/0xa0 gsmtty_cleanup+0x29/0x80 [n_gsm] release_one_tty+0x37/0xe0 process_one_work+0x1e6/0x3e0 worker_thread+0x4c/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe1/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The actual issue is that nothing guards dlci_put() from being called multiple times while the tty driver was triggered but did not yet finished calling gsm_dlci_free().

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: fix calls to page_pool_get_stats Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_s ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix possible NULL dereference in amdgpu_ras_query_error_status_helper() Return invalid error code -EINVAL for invalid block id. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176)

In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Check whether crossbar pad is non-NULL before access When translating source to sink streams in the crossbar subdev, the driver tries to locate the remote subdev connected to the sink pad. The remote pad may be NULL, if userspace tries to enable a stream that ends at an unconnected crossbar sink. When that occurs, the driver dereferences the NULL pad, leading to a crash. Prevent the crash by checking if the pad is NULL before using it, and return an error if it is.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() It is possible that typec_register_partner() returns ERR_PTR on failure. When port->partner is an error, a NULL pointer dereference may occur as shown below. [91222.095236][ T319] typec port0: failed to register partner (-17) ... [91225.061491][ T319] Unable to handle kernel NULL pointer dereference at virtual address 000000000000039f [91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc [91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc [91225.308067][ T319] Call trace: [91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc [91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8 [91225.355900][ T319] kthread_worker_fn+0x178/0x58c [91225.355902][ T319] kthread+0x150/0x200 [91225.355905][ T319] ret_from_fork+0x10/0x30 Add a check for port->partner to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: protect device queue against concurrent access In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix NULL pointer dereference in zone registration error path If device_register() in thermal_zone_device_register_with_trips() returns an error, the tz variable is set to NULL and subsequently dereferenced in kfree(tz->tzp). Commit adc8749b150c ("thermal/drivers/core: Use put_device() if device_register() fails") added the tz = NULL assignment in question to avoid a possible double-free after dropping the reference to the zone device. However, after commit 4649620d9404 ("thermal: core: Make thermal_zone_device_unregister() return after freeing the zone"), that assignment has become redundant, because dropping the reference to the zone device does not cause the zone object to be freed any more. Drop it to address the NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs If init debugfs failed during device registration due to memory allocation failure, debugfs_remove_recursive() is called, after which debugfs_dir is not set to NULL. debugfs_remove_recursive() will be called again during device removal. As a result, illegal pointer is accessed. [ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs! ... [ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 1669.872669] pc : down_write+0x24/0x70 [ 1669.876315] lr : down_write+0x1c/0x70 [ 1669.879961] sp : ffff000036f53a30 [ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8 [ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000 [ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270 [ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8 [ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310 [ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10 [ 1669.914982] x17: 0000000000000000 x16: 0000000000000000 [ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870 [ 1669.925555] x13: 0000000000000040 x12: 0000000000000228 [ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0 [ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10 [ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff [ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00 [ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000 [ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001 [ 1669.962563] Call trace: [ 1669.965000] down_write+0x24/0x70 [ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0 [ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main] [ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw] [ 1669.984175] pci_device_remove+0x48/0xd8 [ 1669.988082] device_release_driver_internal+0x1b4/0x250 [ 1669.993282] device_release_driver+0x28/0x38 [ 1669.997534] pci_stop_bus_device+0x84/0xb8 [ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40 [ 1670.007244] remove_store+0xfc/0x140 [ 1670.010802] dev_attr_store+0x44/0x60 [ 1670.014448] sysfs_kf_write+0x58/0x80 [ 1670.018095] kernfs_fop_write+0xe8/0x1f0 [ 1670.022000] __vfs_write+0x60/0x190 [ 1670.025472] vfs_write+0xac/0x1c0 [ 1670.028771] ksys_write+0x6c/0xd8 [ 1670.032071] __arm64_sys_write+0x24/0x30 [ 1670.035977] el0_svc_common+0x78/0x130 [ 1670.039710] el0_svc_handler+0x38/0x78 [ 1670.043442] el0_svc+0x8/0xc To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool In practice the driver should never send more commands than are allocated to a queue's event pool. In the unlikely event that this happens, the code asserts a BUG_ON, and in the case that the kernel is not configured to crash on panic returns a junk event pointer from the empty event list causing things to spiral from there. This BUG_ON is a historical artifact of the ibmvfc driver first being upstreamed, and it is well known now that the use of BUG_ON is bad practice except in the most unrecoverable scenario. There is nothing about this scenario that prevents the driver from recovering and carrying on. Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL pointer in the case of an empty event pool. Update all call sites to ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate failure or recovery action.

In the Linux kernel, the following vulnerability has been resolved: team: fix null-ptr-deref when team device type is changed Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_as ---truncated---

In the Linux kernel, the following vulnerability has been resolved: pstore/platform: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/panel: fix a possible null pointer dereference In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix an NULL dereference bug The issue here is when this is called from ntfs_load_attr_list(). The "size" comes from le32_to_cpu(attr->res.data_size) so it can't overflow on a 64bit systems but on 32bit systems the "+ 1023" can overflow and the result is zero. This means that the kmalloc will succeed by returning the ZERO_SIZE_PTR and then the memcpy() will crash with an Oops on the next line.

In the Linux kernel, the following vulnerability has been resolved: drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a debugfs null pointer error [WHY & HOW] Check whether get_subvp_en() callback exists before calling it.

In the Linux kernel, the following vulnerability has been resolved: gsmi: fix null-deref in gsmi_get_variable We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi.

In the Linux kernel, the following vulnerability has been resolved: tls: fix NULL deref on tls_sw_splice_eof() with empty record syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof().

In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix connection failure handling In case immediate MPA request processing fails, the newly created endpoint unlinks the listening endpoint and is ready to be dropped. This special case was not handled correctly by the code handling the later TCP socket close, causing a NULL dereference crash in siw_cm_work_handler() when dereferencing a NULL listener. We now also cancel the useless MPA timeout, if immediate MPA request processing fails. This patch furthermore simplifies MPA processing in general: Scheduling a useless TCP socket read in sk_data_ready() upcall is now surpressed, if the socket is already moved out of TCP_ESTABLISHED state.

In the Linux kernel, the following vulnerability has been resolved: mfd: syscon: Fix null pointer dereference in of_syscon_register() kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate() The subs function argument may be NULL, so do not use it before the NULL check.

In the Linux kernel, the following vulnerability has been resolved: net: wangxun: fix kernel panic due to null pointer When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix some null pointer dereference issues in ice_ptp.c devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length needs to be aligned with block size Before calling add partition or resize partition, there is no check on whether the length is aligned with the logical block size. If the logical block size of the disk is larger than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the read command is smaller than the logical block size.If integrity data is supported, this will also result in a null pointer dereference when calling bio_integrity_free.

In the Linux kernel, the following vulnerability has been resolved: crypto: rsa - add a check for allocation failure Static checkers insist that the mpi_alloc() allocation can fail so add a check to prevent a NULL dereference. Small allocations like this can't actually fail in current kernels, but adding a check is very simple and makes the static checkers happy.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vkms: fix a possible null pointer dereference In amdgpu_vkms_conn_get_modes(), the return value of drm_cvt_mode() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_cvt_mode(). Add a check to avoid null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: power: supply: Fix null pointer dereference in smb2_probe devm_kasprintf and devm_kzalloc return a pointer to dynamically allocated memory which can be NULL upon failure.

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid() The nvme_fc_fcp_op structure describing an AEN operation is initialized with a null request structure pointer. An FC LLDD may make a call to nvme_fc_io_getuuid passing a pointer to an nvmefc_fcp_req for an AEN operation. Add validation of the request structure pointer before dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check writeback connectors in create_validate_stream_for_sink [WHY & HOW] This is to check connector type to avoid unhandled null pointer for writeback connectors.

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: dsi: Add missing check for of_find_device_by_node Add check for the return value of of_find_device_by_node() and return the error if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology() Get logical socket id instead of physical id in discover_upi_topology() to avoid out-of-bound access on 'upi = &type->topology[nid][idx];' line that leads to NULL pointer dereference in upi_fill_topology()

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Do not unset preset when cleaning up codec Several functions that take part in codec's initialization and removal are re-used by ASoC codec drivers implementations. Drivers mimic the behavior of hda_codec_driver_probe/remove() found in sound/pci/hda/hda_bind.c with their component->probe/remove() instead. One of the reasons for that is the expectation of snd_hda_codec_device_new() to receive a valid pointer to an instance of struct snd_card. This expectation can be met only once sound card components probing commences. As ASoC sound card may be unbound without codec device being actually removed from the system, unsetting ->preset in snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load scenario causing null-ptr-deref. Preset is assigned only once, during device/driver matching whereas ASoC codec driver's module reloading may occur several times throughout the lifetime of an audio stack.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Check endpoint is valid before dereferencing it When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential NULL dereference Fix potential NULL dereference, in the case when "man", the resource manager might be NULL, when/if we print debug information.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix potential NULL-ptr-dereference in_dev_get() can return NULL which will cause a failure once idev is dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a check for NULL value in idev beforehand. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (axi-fan-control) Fix possible NULL pointer dereference axi_fan_control_irq_handler(), dependent on the private axi_fan_control_data structure, might be called before the hwmon device is registered. That will cause an "Unable to handle kernel NULL pointer dereference" error.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: tracing: Have trace_event_file have ref counters The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue(): spin_lock_irqsave(&hsotg->lock, flags); ... if (!urb->hcpriv) { dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); goto out; } rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv ... out: spin_unlock_irqrestore(&hsotg->lock, flags); When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are concurrently executed, the NULL check of "urb->hcpriv" can be executed before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL pointer dereference. This possible bug is found by an experimental static analysis tool developed by myself. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported, when my tool analyzes the source code of Linux 6.5. To fix this possible bug, "urb->hcpriv = NULL" should be executed with holding the lock "hsotg->lock". After using this patch, my tool never reports the possible bug, with the kernelconfiguration allyesconfig for x86_64. Because I have no associated hardware, I cannot test the patch in runtime testing, and just verify it according to the code logic.