In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix the dead loop of MPLS parse The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type '__be32 [3]' CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: mptcp: plug races between subflow fail and subflow creation We have races similar to the one addressed by the previous patch between subflow failing and additional subflow creation. They are just harder to trigger. The solution is similar. Use a separate flag to track the condition 'socket state prevent any additional subflow creation' protected by the fallback lock. The socket fallback makes such flag true, and also receiving or sending an MP_FAIL option. The field 'allow_infinite_fallback' is now always touched under the relevant lock, we can drop the ONCE annotation on write.

In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: fix PM resume warning Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nan ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack ---truncated---

In the Linux kernel, the following vulnerability has been resolved: riscv: uprobes: Add missing fence.i after building the XOL buffer The XOL (execute out-of-line) buffer is used to single-step the replaced instruction(s) for uprobes. The RISC-V port was missing a proper fence.i (i$ flushing) after constructing the XOL buffer, which can result in incorrect execution of stale/broken instructions. This was found running the BPF selftests "test_progs: uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the uprobes tests randomly blew up.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733 [ +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G W 6.14.0+ #2 [ +0.000009] Tainted: [W]=WARN [ +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.000004] Call Trace: [ +0.000004] <TASK> [ +0.000003] dump_stack_lvl+0x76/0xa0 [ +0.000011] print_report+0xce/0x600 [ +0.000009] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? kasan_complete_mode_report_info+0x76/0x200 [ +0.000007] ? kasan_addr_to_slab+0xd/0xb0 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000707] kasan_report+0xbe/0x110 [ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000541] __asan_report_load8_noabort+0x14/0x30 [ +0.000005] amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu] [ +0.000535] ? stop_cpsch+0x396/0x600 [amdgpu] [ +0.000556] ? stop_cpsch+0x429/0x600 [amdgpu] [ +0.000536] ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu] [ +0.000536] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu] [ +0.000542] amdgpu_device_fini_hw+0x581/0xe90 [amdgpu] [ +0.000485] ? down_write+0xbb/0x140 [ +0.000007] ? __mutex_unlock_slowpath.constprop.0+0x317/0x360 [ +0.000005] ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu] [ +0.000482] ? __kasan_check_write+0x14/0x30 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? up_write+0x55/0xb0 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? blocking_notifier_chain_unregister+0x6c/0xc0 [ +0.000008] amdgpu_driver_unload_kms+0x69/0x90 [amdgpu] [ +0.000484] amdgpu_pci_remove+0x93/0x130 [amdgpu] [ +0.000482] pci_device_remove+0xae/0x1e0 [ +0.000008] device_remove+0xc7/0x180 [ +0.000008] device_release_driver_internal+0x3d4/0x5a0 [ +0.000007] device_release_driver+0x12/0x20 [ +0.000004] pci_stop_bus_device+0x104/0x150 [ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40 [ +0.000005] remove_store+0xd7/0xf0 [ +0.000005] ? __pfx_remove_store+0x10/0x10 [ +0.000006] ? __pfx__copy_from_iter+0x10/0x10 [ +0.000006] ? __pfx_dev_attr_store+0x10/0x10 [ +0.000006] dev_attr_store+0x3f/0x80 [ +0.000006] sysfs_kf_write+0x125/0x1d0 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __kasan_check_write+0x14/0x30 [ +0.000005] kernfs_fop_write_iter+0x2ea/0x490 [ +0.000005] ? rw_verify_area+0x70/0x420 [ +0.000005] ? __pfx_kernfs_fop_write_iter+0x10/0x10 [ +0.000006] vfs_write+0x90d/0xe70 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pfx_vfs_write+0x10/0x10 [ +0.000004] ? local_clock+0x15/0x30 [ +0.000008] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_slab_free+0x5f/0x80 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fdget_pos+0x1d3/0x500 [ +0.000007] ksys_write+0x119/0x220 [ +0.000005] ? putname+0x1c/0x30 [ +0.000006] ? __pfx_ksys_write+0x10/0x10 [ +0.000007] __x64_sys_write+0x72/0xc0 [ +0.000006] x64_sys_call+0x18ab/0x26f0 [ +0.000006] do_syscall_64+0x7c/0x170 [ +0.000004] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __pfx___x64_sys_openat+0x10/0x10 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? __kasan_check_read+0x11/0x20 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240 [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? do_syscall_64+0x88/0x170 [ +0.000003] ? srso_return_thunk+0x5/0x5f [ +0.000004] ? irqentry_exit+0x43/0x50 [ +0.000004] ? srso_return_thunk+0x5 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Do not include stack ptr register in precision backtracking bookkeeping Yi Lai reported an issue ([1]) where the following warning appears in kernel dmesg: [ 60.643604] verifier backtracking bug [ 60.643635] WARNING: CPU: 10 PID: 2315 at kernel/bpf/verifier.c:4302 __mark_chain_precision+0x3a6c/0x3e10 [ 60.648428] Modules linked in: bpf_testmod(OE) [ 60.650471] CPU: 10 UID: 0 PID: 2315 Comm: test_progs Tainted: G OE 6.15.0-rc4-gef11287f8289-dirty #327 PREEMPT(full) [ 60.654385] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 60.656682] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 60.660475] RIP: 0010:__mark_chain_precision+0x3a6c/0x3e10 [ 60.662814] Code: 5a 30 84 89 ea e8 c4 d9 01 00 80 3d 3e 7d d8 04 00 0f 85 60 fa ff ff c6 05 31 7d d8 04 01 48 c7 c7 00 58 30 84 e8 c4 06 a5 ff <0f> 0b e9 46 fa ff ff 48 ... [ 60.668720] RSP: 0018:ffff888116cc7298 EFLAGS: 00010246 [ 60.671075] RAX: 54d70e82dfd31900 RBX: ffff888115b65e20 RCX: 0000000000000000 [ 60.673659] RDX: 0000000000000001 RSI: 0000000000000004 RDI: 00000000ffffffff [ 60.676241] RBP: 0000000000000400 R08: ffff8881f6f23bd3 R09: 1ffff1103ede477a [ 60.678787] R10: dffffc0000000000 R11: ffffed103ede477b R12: ffff888115b60ae8 [ 60.681420] R13: 1ffff11022b6cbc4 R14: 00000000fffffff2 R15: 0000000000000001 [ 60.684030] FS: 00007fc2aedd80c0(0000) GS:ffff88826fa8a000(0000) knlGS:0000000000000000 [ 60.686837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 60.689027] CR2: 000056325369e000 CR3: 000000011088b002 CR4: 0000000000370ef0 [ 60.691623] Call Trace: [ 60.692821] <TASK> [ 60.693960] ? __pfx_verbose+0x10/0x10 [ 60.695656] ? __pfx_disasm_kfunc_name+0x10/0x10 [ 60.697495] check_cond_jmp_op+0x16f7/0x39b0 [ 60.699237] do_check+0x58fa/0xab10 ... Further analysis shows the warning is at line 4302 as below: 4294 /* static subprog call instruction, which 4295 * means that we are exiting current subprog, 4296 * so only r1-r5 could be still requested as 4297 * precise, r0 and r6-r10 or any stack slot in 4298 * the current frame should be zero by now 4299 */ 4300 if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) { 4301 verbose(env, "BUG regs %x\n", bt_reg_mask(bt)); 4302 WARN_ONCE(1, "verifier backtracking bug"); 4303 return -EFAULT; 4304 } With the below test (also in the next patch): __used __naked static void __bpf_jmp_r10(void) { asm volatile ( "r2 = 2314885393468386424 ll;" "goto +0;" "if r2 <= r10 goto +3;" "if r1 >= -1835016 goto +0;" "if r2 <= 8 goto +0;" "if r3 <= 0 goto +0;" "exit;" ::: __clobber_all); } SEC("?raw_tp") __naked void bpf_jmp_r10(void) { asm volatile ( "r3 = 0 ll;" "call __bpf_jmp_r10;" "r0 = 0;" "exit;" ::: __clobber_all); } The following is the verifier failure log: 0: (18) r3 = 0x0 ; R3_w=0 2: (85) call pc+2 caller: R10=fp0 callee: frame1: R1=ctx() R3_w=0 R10=fp0 5: frame1: R1=ctx() R3_w=0 R10=fp0 ; asm volatile (" \ @ verifier_precision.c:184 5: (18) r2 = 0x20202000256c6c78 ; frame1: R2_w=0x20202000256c6c78 7: (05) goto pc+0 8: (bd) if r2 <= r10 goto pc+3 ; frame1: R2_w=0x20202000256c6c78 R10=fp0 9: (35) if r1 >= 0xffe3fff8 goto pc+0 ; frame1: R1=ctx() 10: (b5) if r2 <= 0x8 goto pc+0 mark_precise: frame1: last_idx 10 first_idx 0 subseq_idx -1 mark_precise: frame1: regs=r2 stack= before 9: (35) if r1 >= 0xffe3fff8 goto pc+0 mark_precise: frame1: regs=r2 stack= before 8: (bd) if r2 <= r10 goto pc+3 mark_preci ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check stream id dml21 wrapper to get plane_id [Why & How] Fix a false positive warning which occurs due to lack of correct checks when querying plane_id in DML21. This fixes the warning when performing a mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover): [ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi [ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu [ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024 [ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu] [ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87 [ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246 [ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000 [ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000 [ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000 [ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000 [ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000 [ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0 [ 35.751806] PKRU: 55555554 [ 35.751807] Call Trace: [ 35.751810] <TASK> [ 35.751816] ? show_regs+0x6c/0x80 [ 35.751820] ? __warn+0x88/0x140 [ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751964] ? report_bug+0x182/0x1b0 [ 35.751969] ? handle_bug+0x6e/0xb0 [ 35.751972] ? exc_invalid_op+0x18/0x80 [ 35.751974] ? asm_exc_invalid_op+0x1b/0x20 [ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.752117] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752260] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752403] ? math_pow+0x11/0xa0 [amdgpu] [ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu] [ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu] (cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)

In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning: UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25 load of value 255 is not a valid value for type '_Bool' This is because playback_only is uninitialized and is not written to, as the playback-only property is absent.

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default.

In the Linux kernel, the following vulnerability has been resolved: dm: fix dm_blk_report_zones If dm_get_live_table() returned NULL, dm_put_live_table() was never called. Also, it is possible that md->zone_revalidate_map will change while calling this function. Only read it once, so that we are always using the same value. Otherwise we might miss a call to dm_put_live_table(). Finally, while md->zone_revalidate_map is set and a process is calling blk_revalidate_disk_zones() to set up the zone append emulation resources, it is possible that another process, perhaps triggered by blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If blk_revalidate_disk_zones() fails, these resources can be freed while the other process is still using them, causing a use-after-free error. blk_revalidate_disk_zones() will only ever be called when initially setting up the zone append emulation resources, such as when setting up a zoned dm-crypt table for the first time. Further table swaps will not set md->zone_revalidate_map or call blk_revalidate_disk_zones(). However it must be called using the new table (referenced by md->zone_revalidate_map) and the new queue limits while the DM device is suspended. dm_blk_report_zones() needs some way to distinguish between a call from blk_revalidate_disk_zones(), which must be allowed to use md->zone_revalidate_map to access this not yet activated table, and all other calls to dm_blk_report_zones(), which should not be allowed while the device is suspended and cannot use md->zone_revalidate_map, since the zone resources might be freed by the process currently calling blk_revalidate_disk_zones(). Solve this by tracking the process that sets md->zone_revalidate_map in dm_revalidate_zones() and only allowing that process to make use of it in dm_blk_report_zones().

In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x: fix use after free access in at76_disconnect The memory pointed to by priv is freed at the end of at76_delete_device function (using ieee80211_free_hw). But the code then accesses the udev field of the freed object to put the USB device. This may also lead to a memory leak of the usb device. Fix this by using udev from interface.

In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix use-after-free in page_pool_recycle_in_ring syzbot reported a uaf in page_pool_recycle_in_ring: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943 CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline] _raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline] page_pool_recycle_in_ring net/core/page_pool.c:707 [inline] page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826 page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline] page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline] napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036 skb_pp_recycle net/core/skbuff.c:1047 [inline] skb_free_head net/core/skbuff.c:1094 [inline] skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb net/core/skbuff.c:1204 [inline] sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242 kfree_skb_reason include/linux/skbuff.h:1263 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3343 [inline] root cause is: page_pool_recycle_in_ring ptr_ring_produce spin_lock(&r->producer_lock); WRITE_ONCE(r->queue[r->producer++], ptr) //recycle last page to pool page_pool_release page_pool_scrub page_pool_empty_ring ptr_ring_consume page_pool_return_page //release all page __page_pool_destroy free_percpu(pool->recycle_stats); free(pool) //free spin_unlock(&r->producer_lock); //pool->ring uaf read recycle_stat_inc(pool, ring); page_pool can be free while page pool recycle the last page in ring. Add producer-lock barrier to page_pool_release to prevent the page pool from being free before all pages have been recycled. recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not enabled, which will trigger Wempty-body build warning. Add definition for pool stat macro to fix warning.

In the Linux kernel, the following vulnerability has been resolved: mptcp: prevent BPF accessing lowat from a subflow socket. Alexei reported the following splat: WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0 Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)] CPU: 32 PID: 3276 Comm: test_progs Tainted: GO 6.8.0-12873-g2c43c33bfd23 Call Trace: <TASK> mptcp_set_rcvlowat+0x79/0x1d0 sk_setsockopt+0x6c0/0x1540 __bpf_setsockopt+0x6f/0x90 bpf_sock_ops_setsockopt+0x3c/0x90 bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132 bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86 __cgroup_bpf_run_filter_sock_ops+0xbc/0x250 tcp_connect+0x879/0x1160 tcp_v6_connect+0x50c/0x870 mptcp_connect+0x129/0x280 __inet_stream_connect+0xce/0x370 inet_stream_connect+0x36/0x50 bpf_trampoline_6442491565+0x49/0xef inet_stream_connect+0x5/0x50 __sys_connect+0x63/0x90 __x64_sys_connect+0x14/0x20 The root cause of the issue is that bpf allows accessing mptcp-level proto_ops from a tcp subflow scope. Fix the issue detecting the problematic call and preventing any action.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent double free on error The error handling path in its_vpe_irq_domain_alloc() causes a double free when its_vpe_init() fails after successfully allocating at least one interrupt. This happens because its_vpe_irq_domain_free() frees the interrupts along with the area bitmap and the vprop_page and its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the vprop_page again. Fix this by unconditionally invoking its_vpe_irq_domain_free() which handles all cases correctly and by removing the bitmap/vprop_page freeing from its_vpe_irq_domain_alloc(). [ tglx: Massaged change log ]

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it.

In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.

The Linux kernel before 2.6.25.10 does not properly perform tty operations, which allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving NULL pointer dereference of function pointers in (1) hamradio/6pack.c, (2) hamradio/mkiss.c, (3) irda/irtty-sir.c, (4) ppp_async.c, (5) ppp_synctty.c, (6) slip.c, (7) wan/x25_asy.c, and (8) wireless/strip.c in drivers/net/.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_stats_proc_write() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: raid1: fix use-after-free for original bio in raid1_write_request() r1_bio->bios[] is used to record new bios that will be issued to underlying disks, however, in raid1_write_request(), r1_bio->bios[] will set to the original bio temporarily. Meanwhile, if blocked rdev is set, free_r1bio() will be called causing that all r1_bio->bios[] to be freed: raid1_write_request() r1_bio = alloc_r1bio(mddev, bio); -> r1_bio->bios[] is NULL for (i = 0; i < disks; i++) -> for each rdev in conf // first rdev is normal r1_bio->bios[0] = bio; -> set to original bio // second rdev is blocked if (test_bit(Blocked, &rdev->flags)) break if (blocked_rdev) free_r1bio() put_all_bios() bio_put(r1_bio->bios[0]) -> original bio is freed Test scripts: mdadm -CR /dev/md0 -l1 -n4 /dev/sd[abcd] --assume-clean fio -filename=/dev/md0 -ioengine=libaio -rw=write -bs=4k -numjobs=1 \ -iodepth=128 -name=test -direct=1 echo blocked > /sys/block/md0/md/rd2/state Test result: BUG bio-264 (Not tainted): Object already free ----------------------------------------------------------------------------- Allocated in mempool_alloc_slab+0x24/0x50 age=1 cpu=1 pid=869 kmem_cache_alloc+0x324/0x480 mempool_alloc_slab+0x24/0x50 mempool_alloc+0x6e/0x220 bio_alloc_bioset+0x1af/0x4d0 blkdev_direct_IO+0x164/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 io_submit_one+0x5ca/0xb70 __do_sys_io_submit+0x86/0x270 __x64_sys_io_submit+0x22/0x30 do_syscall_64+0xb1/0x210 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Freed in mempool_free_slab+0x1f/0x30 age=1 cpu=1 pid=869 kmem_cache_free+0x28c/0x550 mempool_free_slab+0x1f/0x30 mempool_free+0x40/0x100 bio_free+0x59/0x80 bio_put+0xf0/0x220 free_r1bio+0x74/0xb0 raid1_make_request+0xadf/0x1150 md_handle_request+0xc7/0x3b0 md_submit_bio+0x76/0x130 __submit_bio+0xd8/0x1d0 submit_bio_noacct_nocheck+0x1eb/0x5c0 submit_bio_noacct+0x169/0xd40 submit_bio+0xee/0x1d0 blkdev_direct_IO+0x322/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 Since that bios for underlying disks are not allocated yet, fix this problem by using mempool_free() directly to free the r1_bio.

In the Linux kernel, the following vulnerability has been resolved: ax25: fix use-after-free bugs caused by ax25_ds_del_timer When the ax25 device is detaching, the ax25_dev_device_down() calls ax25_ds_del_timer() to cleanup the slave_timer. When the timer handler is running, the ax25_ds_del_timer() that calls del_timer() in it will return directly. As a result, the use-after-free bugs could happen, one of the scenarios is shown below: (Thread 1) | (Thread 2) | ax25_ds_timeout() ax25_dev_device_down() | ax25_ds_del_timer() | del_timer() | ax25_dev_put() //FREE | | ax25_dev-> //USE In order to mitigate bugs, when the device is detaching, use timer_shutdown_sync() to stop the timer.

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix oops when HEVC init fails The stateless HEVC decoder saves the instance pointer in the context regardless if the initialization worked or not. This caused a use after free, when the pointer is freed in case of a failure in the deinit function. Only store the instance pointer when the initialization was successful, to solve this issue. Hardware name: Acer Tomato (rev3 - 4) board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] sp : ffff80008750bc20 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000 Call trace: vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec] vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec] vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec] mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec] fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec] v4l2_release+0x7c/0x100 __fput+0x80/0x2d8 __fput_sync+0x58/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xd8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 Code: d503201f f9401660 b900127f b900227f (f9400400)

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: don't check if plane->state->fb == state->fb Currently, when using non-blocking commits, we can see the following kernel warning: [ 110.908514] ------------[ cut here ]------------ [ 110.908529] refcount_t: underflow; use-after-free. [ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0 [ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32 [ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0 [ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0 [ 110.909170] sp : ffffffc00913b9c0 [ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60 [ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480 [ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78 [ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000 [ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004 [ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003 [ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00 [ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572 [ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000 [ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001 [ 110.909434] Call trace: [ 110.909441] refcount_dec_not_one+0xb8/0xc0 [ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4] [ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4] [ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper] [ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4] [ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper] [ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper] [ 110.911716] drm_atomic_commit+0xb0/0xdc [drm] [ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm] [ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm] [ 110.914091] drm_ioctl+0x24c/0x3b0 [drm] [ 110.914850] __arm64_sys_ioctl+0x9c/0xd4 [ 110.914873] invoke_syscall+0x4c/0x114 [ 110.914897] el0_svc_common+0xd0/0x118 [ 110.914917] do_el0_svc+0x38/0xd0 [ 110.914936] el0_svc+0x30/0x8c [ 110.914958] el0t_64_sync_handler+0x84/0xf0 [ 110.914979] el0t_64_sync+0x18c/0x190 [ 110.914996] ---[ end trace 0000000000000000 ]--- This happens because, although `prepare_fb` and `cleanup_fb` are perfectly balanced, we cannot guarantee consistency in the check plane->state->fb == state->fb. This means that sometimes we can increase the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The opposite can also be true. In fact, the struct drm_plane .state shouldn't be accessed directly but instead, the `drm_atomic_get_new_plane_state()` helper function should be used. So, we could stick to this check, but using `drm_atomic_get_new_plane_state()`. But actually, this check is not re ---truncated---

It was discovered that a nft object or expression could reference a nft set on a different nft table, leading to a use-after-free once that table was deleted.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local logging mechanism. Authentication session tokens, including PHPSESSID, XSRF-TOKEN, and laravel_session, are stored in cleartext within world-readable log files. Any local user with access to the machine can extract these session tokens and use them to authenticate remotely to the SaaS environment, bypassing normal login credentials, potentially leading to unauthorized system access and exposure of sensitive information. This vulnerability has been identified by the vendor as: V-2022-008 — Secrets Leaked in Logs.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 25.1.102 and Application versions prior to 25.1.1413 (macOS/Linux client deployments) are vulnerable to an authentication bypass in PrinterInstallerClientService. The service requires root privileges for certain administrative operations, but these checks rely on calls to geteuid(). By preloading a malicious shared object overriding geteuid(), a local attacker can trick the service into believing it is running with root privileges. This bypass enables execution of administrative commands (e.g., enabling debug mode, managing configurations, or invoking privileged features) without proper authorization. While some actions requiring write access to protected files may still fail, the flaw effectively breaks the intended security model of the inter-process communication (IPC) system, allowing local attackers to escalate privileges and compromise system integrity. This vulnerability has been confirmed to be remediated, but it is unclear as to when the patch was introduced.

net/netfilter/nf_dup_netdev.c in the Linux kernel 5.4 through 5.6.10 allows local users to gain privileges because of a heap out-of-bounds write. This is related to nf_tables_offload.

The sctp_do_peeloff function in net/sctp/socket.c in the Linux kernel before 4.14 does not check whether the intended netns is used in a peel-off action, which allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via crafted system calls.

It was discovered that when exec'ing from a non-leader thread, armed POSIX CPU timers would be left on a list but freed, leading to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that.

An integer coercion error was found in the openvswitch kernel module. Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, the reserve_sfa_size() function does not return -EMSGSIZE as expected, potentially leading to an out-of-bounds write access. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix use-after-free for dynamic ftrace_ops KASAN reported a use-after-free with ftrace ops [1]. It was found from vmcore that perf had registered two ops with the same content successively, both dynamic. After unregistering the second ops, a use-after-free occurred. In ftrace_shutdown(), when the second ops is unregistered, the FTRACE_UPDATE_CALLS command is not set because there is another enabled ops with the same content. Also, both ops are dynamic and the ftrace callback function is ftrace_ops_list_func, so the FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value of 'command' will be 0 and ftrace_shutdown() will skip the rcu synchronization. However, ftrace may be activated. When the ops is released, another CPU may be accessing the ops. Add the missing synchronization to fix this problem. [1] BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468 CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132 show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b4/0x248 lib/dump_stack.c:118 print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387 __kasan_report mm/kasan/report.c:547 [inline] kasan_report+0x118/0x210 mm/kasan/report.c:564 check_memory_region_inline mm/kasan/generic.c:187 [inline] __asan_load8+0x98/0xc0 mm/kasan/generic.c:253 __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 ftrace_graph_call+0x0/0x4 __might_sleep+0x8/0x100 include/linux/perf_event.h:1170 __might_fault mm/memory.c:5183 [inline] __might_fault+0x58/0x70 mm/memory.c:5171 do_strncpy_from_user lib/strncpy_from_user.c:41 [inline] strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139 getname_flags+0xb0/0x31c fs/namei.c:149 getname+0x2c/0x40 fs/namei.c:209 [...] Allocated by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:479 [inline] __kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493 kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:675 [inline] perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 __arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723 [...] Freed by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track+0x24/0x34 mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358 __kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437 __kasan_slab_free mm/kasan/common.c:445 [inline] kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446 slab_free_hook mm/slub.c:1569 [inline] slab_free_freelist_hook mm/slub.c:1608 [inline] slab_free mm/slub.c:3179 [inline] kfree+0x12c/0xc10 mm/slub.c:4176 perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 [...]

drivers/usb/gadget/legacy/inode.c in the Linux kernel through 5.16.8 mishandles dev->buf release.

The KEYS subsystem in the Linux kernel before 4.13.10 does not correctly synchronize the actions of updating versus finding a key in the "negative" state to avoid a race condition, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls.

A code injection vulnerability in Trend Micro Deep Security and Cloud One - Workload Security Agent for Linux version 20 and below could allow an attacker to escalate privileges and run arbitrary code in the context of root. Please note: an attacker must first obtain access to the target agent in an un-activated and unconfigured state in order to exploit this vulnerability.

Local privilege escalation due to improper soft link handling. The following products are affected: Acronis Agent (Linux, macOS, Windows) before build 29051.

SQL Server for Linux Containers Elevation of Privilege Vulnerability

kernel/bpf/verifier.c in the Linux kernel through 5.15.14 allows local users to gain privileges because of the availability of pointer arithmetic via certain *_OR_NULL pointer types.

io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859

kernel/ucount.c in the Linux kernel 5.14 through 5.16.4, when unprivileged user namespaces are enabled, allows a use-after-free and privilege escalation because a ucounts object can outlive its namespace.

VMware Workspace ONE Access and Identity Manager contain a privilege escalation vulnerability. A malicious actor with local access can escalate privileges to 'root'.

VMware Workspace ONE Access, Identity Manager and vRealize Automation contain a privilege escalation vulnerability due to improper permissions in support scripts. A malicious actor with local access can escalate privileges to 'root'.

IBM Security Guardium 11.3, 11.4, and 11.5 could allow a local user to obtain elevated privileges due to incorrect authorization checks. IBM X-Force ID: 216753.

VMware Horizon Agent for Linux (prior to 22.x) contains a local privilege escalation as a user is able to change the default shared folder location due to a vulnerable symbolic link. Successful exploitation can result in linking to a root owned file.

VMware Horizon Agent for Linux (prior to 22.x) contains a local privilege escalation that allows a user to escalate to root due to a vulnerable configuration file.