In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible double free in ocxl_file_register_afu info_release() will be called in device_unregister() when info->dev's reference count is 0. So there is no need to call ocxl_afu_put() and kfree() again. Fix this by adding free_minor() and return to err_unregister error path.

In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() We got a syzkaller problem because of aarch64 alignment fault if KFENCE enabled. When the size from user bpf program is an odd number, like 399, 407, etc, it will cause the struct skb_shared_info's unaligned access. As seen below: BUG: KFENCE: use-after-free read in __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 Use-after-free read at 0xffff6254fffac077 (in kfence-#213): __lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline] arch_atomic_add arch/arm64/include/asm/atomic.h:28 [inline] arch_atomic_inc include/linux/atomic-arch-fallback.h:270 [inline] atomic_inc include/asm-generic/atomic-instrumented.h:241 [inline] __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 skb_clone+0xf4/0x214 net/core/skbuff.c:1481 ____bpf_clone_redirect net/core/filter.c:2433 [inline] bpf_clone_redirect+0x78/0x1c0 net/core/filter.c:2420 bpf_prog_d3839dd9068ceb51+0x80/0x330 bpf_dispatcher_nop_func include/linux/bpf.h:728 [inline] bpf_test_run+0x3c0/0x6c0 net/bpf/test_run.c:53 bpf_prog_test_run_skb+0x638/0xa7c net/bpf/test_run.c:594 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 kfence-#213: 0xffff6254fffac000-0xffff6254fffac196, size=407, cache=kmalloc-512 allocated by task 15074 on cpu 0 at 1342.585390s: kmalloc include/linux/slab.h:568 [inline] kzalloc include/linux/slab.h:675 [inline] bpf_test_init.isra.0+0xac/0x290 net/bpf/test_run.c:191 bpf_prog_test_run_skb+0x11c/0xa7c net/bpf/test_run.c:512 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 __arm64_sys_bpf+0x50/0x60 kernel/bpf/syscall.c:4381 To fix the problem, we adjust @size so that (@size + @hearoom) is a multiple of SMP_CACHE_BYTES. So we make sure the struct skb_shared_info is aligned to a cache line.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of ns_writer on remount If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time. In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below: Task1 Task2 -------------------------------- ------------------------------ nilfs_construct_segment nilfs_segctor_sync init_wait init_waitqueue_entry add_wait_queue schedule nilfs_remount (R/W remount case) nilfs_attach_log_writer nilfs_detach_log_writer nilfs_segctor_destroy kfree finish_wait _raw_spin_lock_irqsave __raw_spin_lock_irqsave do_raw_spin_lock debug_spin_lock_before <-- use-after-free While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1]. This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only.

In the Linux kernel, the following vulnerability has been resolved: drivers:md:fix a potential use-after-free bug In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Fix free_irq() on remove Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ...

In the Linux kernel, the following vulnerability has been resolved: arm64: entry: avoid kprobe recursion The cortex_a76_erratum_1463225_debug_handler() function is called when handling debug exceptions (and synchronous exceptions from BRK instructions), and so is called when a probed function executes. If the compiler does not inline cortex_a76_erratum_1463225_debug_handler(), it can be probed. If cortex_a76_erratum_1463225_debug_handler() is probed, any debug exception or software breakpoint exception will result in recursive exceptions leading to a stack overflow. This can be triggered with the ftrace multiple_probes selftest, and as per the example splat below. This is a regression caused by commit: 6459b8469753e9fe ("arm64: entry: consolidate Cortex-A76 erratum 1463225 workaround") ... which removed the NOKPROBE_SYMBOL() annotation associated with the function. My intent was that cortex_a76_erratum_1463225_debug_handler() would be inlined into its caller, el1_dbg(), which is marked noinstr and cannot be probed. Mark cortex_a76_erratum_1463225_debug_handler() as __always_inline to ensure this. Example splat prior to this patch (with recursive entries elided): | # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events | # echo p do_el0_svc >> /sys/kernel/debug/tracing/kprobe_events | # echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable | Insufficient stack space to handle exception! | ESR: 0x0000000096000047 -- DABT (current EL) | FAR: 0xffff800009cefff0 | Task stack: [0xffff800009cf0000..0xffff800009cf4000] | IRQ stack: [0xffff800008000000..0xffff800008004000] | Overflow stack: [0xffff00007fbc00f0..0xffff00007fbc10f0] | CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2 | Hardware name: linux,dummy-virt (DT) | pstate: 604003c5 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : arm64_enter_el1_dbg+0x4/0x20 | lr : el1_dbg+0x24/0x5c | sp : ffff800009cf0000 | x29: ffff800009cf0000 x28: ffff000002c74740 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 00000000604003c5 x22: ffff80000801745c x21: 0000aaaac95ac068 | x20: 00000000f2000004 x19: ffff800009cf0040 x18: 0000000000000000 | x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 | x11: 0000000000000010 x10: ffff800008c87190 x9 : ffff800008ca00d0 | x8 : 000000000000003c x7 : 0000000000000000 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000043a4 | x2 : 00000000f2000004 x1 : 00000000f2000004 x0 : ffff800009cf0040 | Kernel panic - not syncing: kernel stack overflow | CPU: 0 PID: 145 Comm: sh Not tainted 6.0.0 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xe4/0x104 | show_stack+0x18/0x4c | dump_stack_lvl+0x64/0x7c | dump_stack+0x18/0x38 | panic+0x14c/0x338 | test_taint+0x0/0x2c | panic_bad_stack+0x104/0x118 | handle_bad_stack+0x34/0x48 | __bad_stack+0x78/0x7c | arm64_enter_el1_dbg+0x4/0x20 | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 ... | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 ... | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | cortex_a76_erratum_1463225_debug_handler+0x0/0x34 | el1h_64_sync_handler+0x40/0x98 | el1h_64_sync+0x64/0x68 | do_el0_svc+0x0/0x28 | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x18c/0x190 | Kernel Offset: disabled | CPU features: 0x0080,00005021,19001080 | Memory Limit: none | ---[ end Kernel panic - not syncing: kernel stack overflow ]--- With this patch, cortex_a76_erratum_1463225_debug_handler() is inlined into el1_dbg(), and el1_dbg() cannot be probed: | # echo p cortex_a76_erratum_1463225_debug_handler > /sys/kernel/debug/tracing/kprobe_events | sh: write error: No such file or directory | # grep -w cortex_a76_errat ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix WARNING in ip_vs_app_net_cleanup() During the initialization of ip_vs_app_net_init(), if file ip_vs_app fails to be created, the initialization is successful by default. Therefore, the ip_vs_app file doesn't be found during the remove in ip_vs_app_net_cleanup(). It will cause WRNING. The following is the stack information: name 'ip_vs_app' WARNING: CPU: 1 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 Call Trace: <TASK> ops_exit_list+0x125/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix double uncharge the mem of sk_msg If tcp_bpf_sendmsg is running during a tear down operation, psock may be freed. tcp_bpf_sendmsg() tcp_bpf_send_verdict() sk_msg_return() tcp_bpf_sendmsg_redir() unlikely(!psock)) sk_msg_free() The mem of msg has been uncharged in tcp_bpf_send_verdict() by sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock is null, we can simply returning an error code, this would then trigger the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have the side effect of throwing an error up to user space. This would be a slight change in behavior from user side but would look the same as an error if the redirect on the socket threw an error. This issue can cause the following info: WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix buffer copy overflow of ztailpacking feature I got some KASAN report as below: [ 46.959738] ================================================================== [ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188 ... [ 46.960430] Call Trace: [ 46.960430] <TASK> [ 46.960430] dump_stack_lvl+0x41/0x5e [ 46.960430] print_report.cold+0xb2/0x6b7 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_report+0x8a/0x140 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_check_range+0x14d/0x1d0 [ 46.960430] memcpy+0x20/0x60 [ 46.960430] z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080 The root cause is that the tail pcluster won't be a complete filesystem block anymore. So if ztailpacking is used, the second part of an uncompressed tail pcluster may not be ``rq->pageofs_out``.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix memory corruption on probe Add the missing sanity check on the probed-session count to avoid corrupting memory beyond the fixed-size slab-allocated session array when there are more than FASTRPC_MAX_SESSIONS sessions defined in the devicetree.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential double free during failed mount RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2088799

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential double free in create_var_ref() In create_var_ref(), init_var_ref() is called to initialize the fields of variable ref_field, which is allocated in the previous function call to create_hist_field(). Function init_var_ref() allocates the corresponding fields such as ref_field->system, but frees these fields when the function encounters an error. The caller later calls destroy_hist_field() to conduct error handling, which frees the fields and the variable itself. This results in double free of the fields which are already freed in the previous function. Fix this by storing NULL to the corresponding fields when they are freed in init_var_ref().

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix use after free in fc_exch_abts_resp() fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free. Return after the fc_exch_release() call to avoid use after free.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: avoid skb access on nf_stolen When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN".

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: mtk_scp: Fix a potential double free 'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need to free it explicitly in the remove function.

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ==================================================================

In the Linux kernel, the following vulnerability has been resolved: md: fix double free of io_acct_set bioset Now io_acct_set is alloc and free in personality. Remove the codes that free io_acct_set in md_free and md_stop.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma queue left shift overflow issue When queue number is > 4, left shift overflows due to 32 bits integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1. If CONFIG_UBSAN is enabled, kernel dumps below warning: [ 10.363842] ================================================================== [ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/ linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12 [ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int' [ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg [ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021 [ 10.363958] Call Trace: [ 10.363960] <TASK> [ 10.363963] dump_stack_lvl+0x4a/0x5f [ 10.363971] dump_stack+0x10/0x12 [ 10.363974] ubsan_epilogue+0x9/0x45 [ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e [ 10.363979] ? wake_up_klogd+0x4a/0x50 [ 10.363983] ? vprintk_emit+0x8f/0x240 [ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac] [ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac] [ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac] [ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac] [ 10.364030] ? page_pool_alloc_pages+0x4d/0x70 [ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac] [ 10.364042] stmmac_open+0x39e/0x920 [stmmac] [ 10.364050] __dev_open+0xf0/0x1a0 [ 10.364054] __dev_change_flags+0x188/0x1f0 [ 10.364057] dev_change_flags+0x26/0x60 [ 10.364059] do_setlink+0x908/0xc40 [ 10.364062] ? do_setlink+0xb10/0xc40 [ 10.364064] ? __nla_validate_parse+0x4c/0x1a0 [ 10.364068] __rtnl_newlink+0x597/0xa10 [ 10.364072] ? __nla_reserve+0x41/0x50 [ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0 [ 10.364079] ? pskb_expand_head+0x75/0x310 [ 10.364082] ? nla_reserve_64bit+0x21/0x40 [ 10.364086] ? skb_free_head+0x65/0x80 [ 10.364089] ? security_sock_rcv_skb+0x2c/0x50 [ 10.364094] ? __cond_resched+0x19/0x30 [ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420 [ 10.364100] rtnl_newlink+0x49/0x70 This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue mapping warning. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195

In the Linux kernel, the following vulnerability has been resolved: blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx blk_mq_run_hw_queues() could be run when there isn't queued request and after queue is cleaned up, at that time tagset is freed, because tagset lifetime is covered by driver, and often freed after blk_cleanup_queue() returns. So don't touch ->tagset for figuring out current default hctx by the mapping built in request queue, so use-after-free on tagset can be avoided. Meantime this way should be fast than retrieving mapping from tagset.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: fix issue of invalid opcode in lapbeth_open() If lapb_register() failed when lapb device goes to up for the first time, the NAPI is not disabled. As a result, the invalid opcode issue is reported when the lapb device goes to up for the second time. The stack info is as follows: [ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442! [ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0 [ 1958.332310][T11356] Call Trace: [ 1958.332817][T11356] <TASK> [ 1958.336135][T11356] lapbeth_open+0x18/0x90 [ 1958.337446][T11356] __dev_open+0x258/0x490 [ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0 [ 1958.345325][T11356] dev_change_flags+0x93/0x160 [ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0 [ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0 [ 1958.349638][T11356] sock_ioctl+0x5d1/0x750 [ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790 [ 1958.365594][T11356] do_syscall_64+0x35/0x80 [ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1958.377381][T11356] </TASK>

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix a buffer overflow in mgmt_mesh_add() Smatch Warning: net/bluetooth/mgmt_util.c:375 mgmt_mesh_add() error: __memcpy() 'mesh_tx->param' too small (48 vs 50) Analysis: 'mesh_tx->param' is array of size 48. This is the destination. u8 param[sizeof(struct mgmt_cp_mesh_send) + 29]; // 19 + 29 = 48. But in the caller 'mesh_send' we reject only when len > 50. len > (MGMT_MESH_SEND_SIZE + 31) // 19 + 31 = 50.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup Commit b3c9a924aab6 ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove") fixed a use-after-free error due the vesafb driver freeing the fb_info in the .remove handler instead of doing it in .fb_destroy. This can happen if the .fb_destroy callback is executed after the .remove callback, since the former tries to access a pointer freed by the latter. But that change didn't take into account that another possible scenario is that .fb_destroy is called before the .remove callback. For example, if no process has the fbdev chardev opened by the time the driver is removed. If that's the case, fb_info will be freed when unregister_framebuffer() is called, making the fb_info pointer accessed in vesafb_remove() after that to no longer be valid. To prevent that, move the expression containing the info->par to happen before the unregister_framebuffer() function call.

In the Linux kernel, the following vulnerability has been resolved: bfq: Avoid merging queues with different parents It can happen that the parent of a bfqq changes between the moment we decide two queues are worth to merge (and set bic->stable_merge_bfqq) and the moment bfq_setup_merge() is called. This can happen e.g. because the process submitted IO for a different cgroup and thus bfqq got reparented. It can even happen that the bfqq we are merging with has parent cgroup that is already offline and going to be destroyed in which case the merge can lead to use-after-free issues such as: BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50 Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544 CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x46/0x5a print_address_description.constprop.0+0x1f/0x140 ? __bfq_deactivate_entity+0x9cb/0xa50 kasan_report.cold+0x7f/0x11b ? __bfq_deactivate_entity+0x9cb/0xa50 __bfq_deactivate_entity+0x9cb/0xa50 ? update_curr+0x32f/0x5d0 bfq_deactivate_entity+0xa0/0x1d0 bfq_del_bfqq_busy+0x28a/0x420 ? resched_curr+0x116/0x1d0 ? bfq_requeue_bfqq+0x70/0x70 ? check_preempt_wakeup+0x52b/0xbc0 __bfq_bfqq_expire+0x1a2/0x270 bfq_bfqq_expire+0xd16/0x2160 ? try_to_wake_up+0x4ee/0x1260 ? bfq_end_wr_async_queues+0xe0/0xe0 ? _raw_write_unlock_bh+0x60/0x60 ? _raw_spin_lock_irq+0x81/0xe0 bfq_idle_slice_timer+0x109/0x280 ? bfq_dispatch_request+0x4870/0x4870 __hrtimer_run_queues+0x37d/0x700 ? enqueue_hrtimer+0x1b0/0x1b0 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_update_offsets_now+0x6f/0x280 hrtimer_interrupt+0x2c8/0x740 Fix the problem by checking that the parent of the two bfqqs we are merging in bfq_setup_merge() is the same.

In the Linux kernel, the following vulnerability has been resolved: driver: base: fix UAF when driver_attach failed When driver_attach(drv); failed, the driver_private will be freed. But it has been added to the bus, which caused a UAF. To fix it, we need to delete it from the bus when failed.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: add missing boundary check in vm_access A missing bounds check in vm_access() can lead to an out-of-bounds read or write in the adjacent memory area, since the len attribute is not validated before the memcpy later in the function, potentially hitting: [ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000 [ 183.637934] #PF: supervisor read access in kernel mode [ 183.637997] #PF: error_code(0x0000) - not-present page [ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0 [ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI [ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1 [ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019 [ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10 [ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246 [ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc [ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004 [ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000 [ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000 [ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000 [ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000 [ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0 [ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 183.650142] Call Trace: [ 183.650988] <TASK> [ 183.651793] vm_access+0x1f0/0x2a0 [i915] [ 183.652726] __access_remote_vm+0x224/0x380 [ 183.653561] mem_rw.isra.0+0xf9/0x190 [ 183.654402] vfs_read+0x9d/0x1b0 [ 183.655238] ksys_read+0x63/0xe0 [ 183.656065] do_syscall_64+0x38/0xc0 [ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 183.657663] RIP: 0033:0x7fe5ef725142 [ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142 [ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005 [ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046 [ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0 [ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000 Changes since v1: - Updated if condition with range_overflows_t [Chris Wilson] [mauld: tidy up the commit message and add Cc: stable] (cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)

In the Linux kernel, the following vulnerability has been resolved: KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive. Not checking the active flag during refresh is particularly egregious, as KVM can end up with a valid, inactive cache, which can lead to a variety of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing an mmu_notifier invalidation due to the cache not being on the list of gfns to invalidate. Note, "active" needs to be set if and only if the cache is on the list of caches, i.e. is reachable via mmu_notifier events. If a relevant mmu_notifier event occurs while the cache is "active" but not on the list, KVM will not acquire the cache's lock and so will not serailize the mmu_notifier event with active users and/or kvm_gpc_refresh(). A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND can be exploited to trigger the bug. 1. Deactivate shinfo cache: kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO kvm_gpc_deactivate kvm_gpc_unmap gpc->valid = false gpc->khva = NULL gpc->active = false Result: active = false, valid = false 2. Cause cache refresh: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast kvm_gpc_check return -EWOULDBLOCK because !gpc->valid kvm_xen_set_evtchn_fast return -EWOULDBLOCK kvm_gpc_refresh hva_to_pfn_retry gpc->valid = true gpc->khva = not NULL Result: active = false, valid = true 3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl KVM_XEN_ATTR_TYPE_SHARED_INFO: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast read_lock gpc->lock kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO mutex_lock kvm->lock kvm_xen_shared_info_init kvm_gpc_activate gpc->khva = NULL kvm_gpc_check [ Check passes because gpc->valid is still true, even though gpc->khva is already NULL. ] shinfo = gpc->khva pending_bits = shinfo->evtchn_pending CRASH: test_and_set_bit(..., pending_bits)

In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Fix shrinker list corruption by madvise IOCTL Calling madvise IOCTL twice on BO causes memory shrinker list corruption and crashes kernel because BO is already on the list and it's added to the list again, while BO should be removed from the list before it's re-added. Fix it.

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove() In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io triggers KASAN use-after-free. To avoid the use-after-free, keep the reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to fsl_destroy_mc_io(). This patch needs rework to apply to kernels older than v5.15.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3 Call trace: dpu_vbif_init_memtypes+0x40/0xb8 dpu_runtime_resume+0xcc/0x1c0 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x134/0x258 __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x36c/0x49c __pm_runtime_resume+0x80/0xb0 dpu_core_irq_uninstall+0x30/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c Patchwork: https://patchwork.freedesktop.org/patch/483255/ [DB: fixed Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: clk: visconti: prevent array overflow in visconti_clk_register_gates() This code was using -1 to represent that there was no reset function. Unfortunately, the -1 was stored in u8 so the if (clks[i].rs_id >= 0) condition was always true. This lead to an out of bounds access in visconti_clk_register_gates().

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions() If an error occurs in dsa_devlink_region_create(), then 'priv->regions' array will be accessed by negative index '-1'. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch.

In the Linux kernel, the following vulnerability has been resolved: s390: fix double free of GS and RI CBs on fork() failure The pointers for guarded storage and runtime instrumentation control blocks are stored in the thread_struct of the associated task. These pointers are initially copied on fork() via arch_dup_task_struct() and then cleared via copy_thread() before fork() returns. If fork() happens to fail after the initial task dup and before copy_thread(), the newly allocated task and associated thread_struct memory are freed via free_task() -> arch_release_task_struct(). This results in a double free of the guarded storage and runtime info structs because the fields in the failed task still refer to memory associated with the source task. This problem can manifest as a BUG_ON() in set_freepointer() (with CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled) when running trinity syscall fuzz tests on s390x. To avoid this problem, clear the associated pointer fields in arch_dup_task_struct() immediately after the new task is copied. Note that the RI flag is still cleared in copy_thread() because it resides in thread stack memory and that is where stack info is copied.

In the Linux kernel, the following vulnerability has been resolved: scsi: zfcp: Fix double free of FSF request when qdio send fails We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache the FSF request ID when sending a new FSF request. This is used in case the sending fails and we need to remove the request from our internal hash table again (so we don't keep an invalid reference and use it when we free the request again). In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32 bit wide), but the rest of the zfcp code (and the firmware specification) handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x ELF ABI]). For one this has the obvious problem that when the ID grows past 32 bit (this can happen reasonably fast) it is truncated to 32 bit when storing it in the cache variable and so doesn't match the original ID anymore. The second less obvious problem is that even when the original ID has not yet grown past 32 bit, as soon as the 32nd bit is set in the original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we cast it back to 'unsigned long'. As the cached variable is of a signed type, the compiler will choose a sign-extending instruction to load the 32 bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the request again all the leading zeros will be flipped to ones to extend the sign and won't match the original ID anymore (this has been observed in practice). If we can't successfully remove the request from the hash table again after 'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify the adapter about new work because the adapter is already gone during e.g. a ChpID toggle) we will end up with a double free. We unconditionally free the request in the calling function when 'zfcp_fsf_req_send()' fails, but because the request is still in the hash table we end up with a stale memory reference, and once the zfcp adapter is either reset during recovery or shutdown we end up freeing the same memory twice. The resulting stack traces vary depending on the kernel and have no direct correlation to the place where the bug occurs. Here are three examples that have been seen in practice: list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:62! monitor event: 0040 ilc:2 [#1] PREEMPT SMP Modules linked in: ... CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded Hardware name: ... Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6 0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8 00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800 00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70 Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336 00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8 #00000003cbeea1f4: af000000 mc 0,0 >00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78 00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48 00000003cbeea204: b9040043 lgr %r4,%r3 00000003cbeea208: b9040051 lgr %r5,%r1 00000003cbeea20c: b9040032 lgr %r3,%r2 Call Trace: [<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140 ([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140) [<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp] [<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential array overflow in bpf_trampoline_get_progs() The cnt value in the 'cnt >= BPF_MAX_TRAMP_PROGS' check does not include BPF_TRAMP_MODIFY_RETURN bpf programs, so the number of the attached BPF_TRAMP_MODIFY_RETURN bpf programs in a trampoline can exceed BPF_MAX_TRAMP_PROGS. When this happens, the assignment '*progs++ = aux->prog' in bpf_trampoline_get_progs() will cause progs array overflow as the progs field in the bpf_tramp_progs struct can only hold at most BPF_MAX_TRAMP_PROGS bpf programs.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: don't override retval if we already lost the skb If we're redirecting the skb, and haven't called tcf_mirred_forward(), yet, we need to tell the core to drop the skb by setting the retcode to SHOT. If we have called tcf_mirred_forward(), however, the skb is out of our hands and returning SHOT will lead to UaF. Move the retval override to the error path which actually need it.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait While performing fast composition switch, there is a possibility that the process of ffs_ep0_write/ffs_ep0_read get into a race condition due to ep0req being freed up from functionfs_unbind. Consider the scenario that the ffs_ep0_write calls the ffs_ep0_queue_wait by taking a lock &ffs->ev.waitq.lock. However, the functionfs_unbind isn't bounded so it can go ahead and mark the ep0req to NULL, and since there is no NULL check in ffs_ep0_queue_wait we will end up in use-after-free. Fix this by making a serialized execution between the two functions using a mutex_lock(ffs->mutex).

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free of anonymous device after snapshot creation failure When creating a snapshot we may do a double free of an anonymous device in case there's an error committing the transaction. The second free may result in freeing an anonymous device number that was allocated by some other subsystem in the kernel or another btrfs filesystem. The steps that lead to this: 1) At ioctl.c:create_snapshot() we allocate an anonymous device number and assign it to pending_snapshot->anon_dev; 2) Then we call btrfs_commit_transaction() and end up at transaction.c:create_pending_snapshot(); 3) There we call btrfs_get_new_fs_root() and pass it the anonymous device number stored in pending_snapshot->anon_dev; 4) btrfs_get_new_fs_root() frees that anonymous device number because btrfs_lookup_fs_root() returned a root - someone else did a lookup of the new root already, which could some task doing backref walking; 5) After that some error happens in the transaction commit path, and at ioctl.c:create_snapshot() we jump to the 'fail' label, and after that we free again the same anonymous device number, which in the meanwhile may have been reallocated somewhere else, because pending_snapshot->anon_dev still has the same value as in step 1. Recently syzbot ran into this and reported the following trace: ------------[ cut here ]------------ ida_free called for id=51 which is not allocated. WARNING: CPU: 1 PID: 31038 at lib/idr.c:525 ida_free+0x370/0x420 lib/idr.c:525 Modules linked in: CPU: 1 PID: 31038 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00410-gc02197fc9076 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:ida_free+0x370/0x420 lib/idr.c:525 Code: 10 42 80 3c 28 (...) RSP: 0018:ffffc90015a67300 EFLAGS: 00010246 RAX: be5130472f5dd000 RBX: 0000000000000033 RCX: 0000000000040000 RDX: ffffc90009a7a000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: ffffc90015a673f0 R08: ffffffff81577992 R09: 1ffff92002b4cdb4 R10: dffffc0000000000 R11: fffff52002b4cdb5 R12: 0000000000000246 R13: dffffc0000000000 R14: ffffffff8e256b80 R15: 0000000000000246 FS: 00007fca3f4b46c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f167a17b978 CR3: 000000001ed26000 CR4: 0000000000350ef0 Call Trace: <TASK> btrfs_get_root_ref+0xa48/0xaf0 fs/btrfs/disk-io.c:1346 create_pending_snapshot+0xff2/0x2bc0 fs/btrfs/transaction.c:1837 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1931 btrfs_commit_transaction+0xf1c/0x3740 fs/btrfs/transaction.c:2404 create_snapshot+0x507/0x880 fs/btrfs/ioctl.c:848 btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:998 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1044 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1306 btrfs_ioctl_snap_create_v2+0x1ca/0x400 fs/btrfs/ioctl.c:1393 btrfs_ioctl+0xa74/0xd40 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xfe/0x170 fs/ioctl.c:857 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fca3e67dda9 Code: 28 00 00 00 (...) RSP: 002b:00007fca3f4b40c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fca3e7abf80 RCX: 00007fca3e67dda9 RDX: 00000000200005c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fca3e6ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fca3e7abf80 R15: 00007fff6bf95658 </TASK> Where we get an explicit message where we attempt to free an anonymous device number that is not currently allocated. It happens in a different code path from the example below, at btrfs_get_root_ref(), so this change may not fix the case triggered by sy ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix potential double free on mesh join While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE.

In the Linux kernel, the following vulnerability has been resolved: btrfs: always report error in run_one_delayed_ref() Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but if end users hit such problem, there will be no chance that btrfs_debug() is enabled. This can lead to very little useful info for debugging. This patch will: - Add extra info for error reporting Including: * logical bytenr * num_bytes * type * action * ref_mod - Replace the btrfs_debug() with btrfs_err() - Move the error reporting into run_one_delayed_ref() This is to avoid use-after-free, the @node can be freed in the caller. This error should only be triggered at most once. As if run_one_delayed_ref() failed, we trigger the error message, then causing the call chain to error out: btrfs_run_delayed_refs() `- btrfs_run_delayed_refs() `- btrfs_run_delayed_refs_for_head() `- run_one_delayed_ref() And we will abort the current transaction in btrfs_run_delayed_refs(). If we have to run delayed refs for the abort transaction, run_one_delayed_ref() will just cleanup the refs and do nothing, thus no new error messages would be output.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix space cache corruption and potential double allocations When testing space_cache v2 on a large set of machines, we encountered a few symptoms: 1. "unable to add free space :-17" (EEXIST) errors. 2. Missing free space info items, sometimes caught with a "missing free space info for X" error. 3. Double-accounted space: ranges that were allocated in the extent tree and also marked as free in the free space tree, ranges that were marked as allocated twice in the extent tree, or ranges that were marked as free twice in the free space tree. If the latter made it onto disk, the next reboot would hit the BUG_ON() in add_new_free_space(). 4. On some hosts with no on-disk corruption or error messages, the in-memory space cache (dumped with drgn) disagreed with the free space tree. All of these symptoms have the same underlying cause: a race between caching the free space for a block group and returning free space to the in-memory space cache for pinned extents causes us to double-add a free range to the space cache. This race exists when free space is cached from the free space tree (space_cache=v2) or the extent tree (nospace_cache, or space_cache=v1 if the cache needs to be regenerated). struct btrfs_block_group::last_byte_to_unpin and struct btrfs_block_group::progress are supposed to protect against this race, but commit d0c2f4fa555e ("btrfs: make concurrent fsyncs wait less when waiting for a transaction commit") subtly broke this by allowing multiple transactions to be unpinning extents at the same time. Specifically, the race is as follows: 1. An extent is deleted from an uncached block group in transaction A. 2. btrfs_commit_transaction() is called for transaction A. 3. btrfs_run_delayed_refs() -> __btrfs_free_extent() runs the delayed ref for the deleted extent. 4. __btrfs_free_extent() -> do_free_extent_accounting() -> add_to_free_space_tree() adds the deleted extent back to the free space tree. 5. do_free_extent_accounting() -> btrfs_update_block_group() -> btrfs_cache_block_group() queues up the block group to get cached. block_group->progress is set to block_group->start. 6. btrfs_commit_transaction() for transaction A calls switch_commit_roots(). It sets block_group->last_byte_to_unpin to block_group->progress, which is block_group->start because the block group hasn't been cached yet. 7. The caching thread gets to our block group. Since the commit roots were already switched, load_free_space_tree() sees the deleted extent as free and adds it to the space cache. It finishes caching and sets block_group->progress to U64_MAX. 8. btrfs_commit_transaction() advances transaction A to TRANS_STATE_SUPER_COMMITTED. 9. fsync calls btrfs_commit_transaction() for transaction B. Since transaction A is already in TRANS_STATE_SUPER_COMMITTED and the commit is for fsync, it advances. 10. btrfs_commit_transaction() for transaction B calls switch_commit_roots(). This time, the block group has already been cached, so it sets block_group->last_byte_to_unpin to U64_MAX. 11. btrfs_commit_transaction() for transaction A calls btrfs_finish_extent_commit(), which calls unpin_extent_range() for the deleted extent. It sees last_byte_to_unpin set to U64_MAX (by transaction B!), so it adds the deleted extent to the space cache again! This explains all of our symptoms above: * If the sequence of events is exactly as described above, when the free space is re-added in step 11, it will fail with EEXIST. * If another thread reallocates the deleted extent in between steps 7 and 11, then step 11 will silently re-add that space to the space cache as free even though it is actually allocated. Then, if that space is allocated *again*, the free space tree will be corrupted (namely, the wrong item will be deleted). * If we don't catch this free space tree corr ---truncated---