In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix a UAF bug on the error path of probing When the driver fails in snd_card_register() at probe time, it will free the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug. The following log can reveal it: [ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] [ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0 [ 50.729530] Call Trace: [ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] Fix this by adding usb_kill_urb() before usb_free_urb().

In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts This patch is against CVE-2023-6270. The description of cve is: A flaw was found in the ATA over Ethernet (AoE) driver in the Linux kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on `struct net_device`, and a use-after-free can be triggered by racing between the free on the struct and the access through the `skbtxq` global queue. This could lead to a denial of service condition or potential code execution. In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial code is finished. But the net_device ifp will still be used in later tx()->dev_queue_xmit() in kthread. Which means that the dev_put(ifp) should NOT be called in the success path of skb initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into use-after-free because the net_device is freed. This patch removed the dev_put(ifp) in the success path in aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout When the sco connection is established and then, the sco socket is releasing, timeout_work will be scheduled to judge whether the sco disconnection is timeout. The sock will be deallocated later, but it is dereferenced again in sco_sock_timeout. As a result, the use-after-free bugs will happen. The root cause is shown below: Cleanup Thread | Worker Thread sco_sock_release | sco_sock_close | __sco_sock_close | sco_sock_set_timer | schedule_delayed_work | sco_sock_kill | (wait a time) sock_put(sk) //FREE | sco_sock_timeout | sock_hold(sk) //USE The KASAN report triggered by POC is shown below: [ 95.890016] ================================================================== [ 95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0 [ 95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7 ... [ 95.890755] Workqueue: events sco_sock_timeout [ 95.890755] Call Trace: [ 95.890755] <TASK> [ 95.890755] dump_stack_lvl+0x45/0x110 [ 95.890755] print_address_description+0x78/0x390 [ 95.890755] print_report+0x11b/0x250 [ 95.890755] ? __virt_addr_valid+0xbe/0xf0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_report+0x139/0x170 [ 95.890755] ? update_load_avg+0xe5/0x9f0 [ 95.890755] ? sco_sock_timeout+0x5e/0x1c0 [ 95.890755] kasan_check_range+0x2c3/0x2e0 [ 95.890755] sco_sock_timeout+0x5e/0x1c0 [ 95.890755] process_one_work+0x561/0xc50 [ 95.890755] worker_thread+0xab2/0x13c0 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] kthread+0x279/0x300 [ 95.890755] ? pr_cont_work+0x490/0x490 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork+0x34/0x60 [ 95.890755] ? kthread_blkcg+0xa0/0xa0 [ 95.890755] ret_from_fork_asm+0x11/0x20 [ 95.890755] </TASK> [ 95.890755] [ 95.890755] Allocated by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] __kasan_kmalloc+0x86/0x90 [ 95.890755] __kmalloc+0x17f/0x360 [ 95.890755] sk_prot_alloc+0xe1/0x1a0 [ 95.890755] sk_alloc+0x31/0x4e0 [ 95.890755] bt_sock_alloc+0x2b/0x2a0 [ 95.890755] sco_sock_create+0xad/0x320 [ 95.890755] bt_sock_create+0x145/0x320 [ 95.890755] __sock_create+0x2e1/0x650 [ 95.890755] __sys_socket+0xd0/0x280 [ 95.890755] __x64_sys_socket+0x75/0x80 [ 95.890755] do_syscall_64+0xc4/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] Freed by task 506: [ 95.890755] kasan_save_track+0x3f/0x70 [ 95.890755] kasan_save_free_info+0x40/0x50 [ 95.890755] poison_slab_object+0x118/0x180 [ 95.890755] __kasan_slab_free+0x12/0x30 [ 95.890755] kfree+0xb2/0x240 [ 95.890755] __sk_destruct+0x317/0x410 [ 95.890755] sco_sock_release+0x232/0x280 [ 95.890755] sock_close+0xb2/0x210 [ 95.890755] __fput+0x37f/0x770 [ 95.890755] task_work_run+0x1ae/0x210 [ 95.890755] get_signal+0xe17/0xf70 [ 95.890755] arch_do_signal_or_restart+0x3f/0x520 [ 95.890755] syscall_exit_to_user_mode+0x55/0x120 [ 95.890755] do_syscall_64+0xd1/0x1b0 [ 95.890755] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 95.890755] [ 95.890755] The buggy address belongs to the object at ffff88800c388000 [ 95.890755] which belongs to the cache kmalloc-1k of size 1024 [ 95.890755] The buggy address is located 128 bytes inside of [ 95.890755] freed 1024-byte region [ffff88800c388000, ffff88800c388400) [ 95.890755] [ 95.890755] The buggy address belongs to the physical page: [ 95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388 [ 95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 95.890755] ano ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table() nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm will call nouveau_bo_del_ttm() and free the memory.Thus, when nouveau_bo_init() returns an error, the gem object has already been released. Then the call to nouveau_bo_ref() will use the freed "nvbo->bo" and lead to a use-after-free bug. We should delete the call to nouveau_bo_ref() to avoid the use-after-free.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix global oob in ksmbd_nl_policy Similar to a reported issue (check the commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value.

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free in do_zone_finish() Shinichiro reported the following use-after-free triggered by the device replace operation in fstests btrfs/070. BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0 ================================================================== BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs] Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007 CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0x200/0x3e0 kasan_report+0xd8/0x110 ? do_zone_finish+0x91a/0xb90 [btrfs] ? do_zone_finish+0x91a/0xb90 [btrfs] do_zone_finish+0x91a/0xb90 [btrfs] btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs] ? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs] ? btrfs_put_root+0x2d/0x220 [btrfs] ? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs] cleaner_kthread+0x21e/0x380 [btrfs] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs] kthread+0x2e3/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 3493983: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_alloc_device+0xb3/0x4e0 [btrfs] device_list_add.constprop.0+0x993/0x1630 [btrfs] btrfs_scan_one_device+0x219/0x3d0 [btrfs] btrfs_control_ioctl+0x26e/0x310 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 3494056: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3f/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x32/0x70 kfree+0x11b/0x320 btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs] btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs] btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs] btrfs_ioctl+0xb27/0x57d0 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 The buggy address belongs to the object at ffff8881543c8000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 96 bytes inside of freed 1024-byte region [ffff8881543c8000, ffff8881543c8400) The buggy address belongs to the physical page: page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8 head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb This UAF happens because we're accessing stale zone information of a already removed btrfs_device in do_zone_finish(). The sequence of events is as follows: btrfs_dev_replace_start btrfs_scrub_dev btrfs_dev_replace_finishing btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced btrfs_rm_dev_replace_free_srcdev btrfs_free_device <-- device freed cleaner_kthread btrfs_delete_unused_bgs btrfs_zone_finish do_zone_finish <-- refers the freed device The reason for this is that we're using a ---truncated---

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: vt8623fb: Check the size of screen before memset_io() In the function vt8623fb_set_par(), the value of 'screen_size' is calculated by the user input. If the user provides the improper value, the value of 'screen_size' may larger than 'info->screen_size', which may cause the following bug: [ 583.339036] BUG: unable to handle page fault for address: ffffc90005000000 [ 583.339049] #PF: supervisor write access in kernel mode [ 583.339052] #PF: error_code(0x0002) - not-present page [ 583.339074] RIP: 0010:memset_orig+0x33/0xb0 [ 583.339110] Call Trace: [ 583.339118] vt8623fb_set_par+0x11cd/0x21e0 [ 583.339146] fb_set_var+0x604/0xeb0 [ 583.339181] do_fb_ioctl+0x234/0x670 [ 583.339209] fb_ioctl+0xdd/0x130 Fix the this by checking the value of 'screen_size' before memset_io().

In the Linux kernel, the following vulnerability has been resolved: llc: call sock_orphan() at release time syzbot reported an interesting trace [1] caused by a stale sk->sk_wq pointer in a closed llc socket. In commit ff7b11aa481f ("net: socket: set sock->sk to NULL after calling proto_ops::release()") Eric Biggers hinted that some protocols are missing a sock_orphan(), we need to perform a full audit. In net-next, I plan to clear sock->sk from sock_orphan() and amend Eric patch to add a warning. [1] BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline] BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline] BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline] BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27 CPU: 1 PID: 27 Comm: ksoftirqd/1 Not tainted 6.8.0-rc1-syzkaller-00049-g6098d87eaf31 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 list_empty include/linux/list.h:373 [inline] waitqueue_active include/linux/wait.h:127 [inline] sock_def_write_space_wfree net/core/sock.c:3384 [inline] sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 skb_release_head_state+0xa3/0x2b0 net/core/skbuff.c:1080 skb_release_all net/core/skbuff.c:1092 [inline] napi_consume_skb+0x119/0x2b0 net/core/skbuff.c:1404 e1000_unmap_and_free_tx_resource+0x144/0x200 drivers/net/ethernet/intel/e1000/e1000_main.c:1970 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3860 [inline] e1000_clean+0x4a1/0x26e0 drivers/net/ethernet/intel/e1000/e1000_main.c:3801 __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x956/0xe90 net/core/dev.c:6778 __do_softirq+0x21a/0x8de kernel/softirq.c:553 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x31/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x660/0xa10 kernel/smpboot.c:164 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 </TASK> Allocated by task 5167: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_lru+0x142/0x6f0 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3019 [inline] sock_alloc_inode+0x25/0x1c0 net/socket.c:308 alloc_inode+0x5d/0x220 fs/inode.c:260 new_inode_pseudo+0x16/0x80 fs/inode.c:1005 sock_alloc+0x40/0x270 net/socket.c:634 __sock_create+0xbc/0x800 net/socket.c:1535 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x14c/0x260 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1718 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 0: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x121/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inlin ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix sc7280 lpass potential buffer overflow Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix a memory corruption iwl_fw_ini_trigger_tlv::data is a pointer to a __le32, which means that if we copy to iwl_fw_ini_trigger_tlv::data + offset while offset is in bytes, we'll write past the buffer.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix RCU use in TDLS fast-xmit This looks up the link under RCU protection, but isn't guaranteed to actually have protection. Fix that.

In the Linux kernel, the following vulnerability has been resolved: dm raid: fix address sanitizer warning in raid_resume There is a KASAN warning in raid_resume when running the lvm test lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks is greater than rs->raid_disks, so the loop touches one entry beyond the allocated length.

In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: Fix possible UAF in tsi148_dma_list_add Smatch report warning as follows: drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn: '&entry->list' not removed from list In tsi148_dma_list_add(), the error path "goto err_dma" will not remove entry->list from list->entries, but entry will be freed, then list traversal may cause UAF. Fix by removeing it from list->entries before free().

In the Linux kernel, the following vulnerability has been resolved: intel_th: msu: Fix vmalloced buffers After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP") there's a chance of DMA buffer getting allocated via vmalloc(), which messes up the mmapping code: > RIP: msc_mmap_fault [intel_th_msu] > Call Trace: > <TASK> > __do_fault > do_fault ... Fix this by accounting for vmalloc possibility.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix max_sge overflow in smb_extract_folioq_to_rdma() This fixes the following problem: [ 749.901015] [ T8673] run fstests cifs/001 at 2025-06-17 09:40:30 [ 750.346409] [ T9870] ================================================================== [ 750.346814] [ T9870] BUG: KASAN: slab-out-of-bounds in smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.347330] [ T9870] Write of size 8 at addr ffff888011082890 by task xfs_io/9870 [ 750.347705] [ T9870] [ 750.348077] [ T9870] CPU: 0 UID: 0 PID: 9870 Comm: xfs_io Kdump: loaded Not tainted 6.16.0-rc2-metze.02+ #1 PREEMPT(voluntary) [ 750.348082] [ T9870] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 750.348085] [ T9870] Call Trace: [ 750.348086] [ T9870] <TASK> [ 750.348088] [ T9870] dump_stack_lvl+0x76/0xa0 [ 750.348106] [ T9870] print_report+0xd1/0x640 [ 750.348116] [ T9870] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 750.348120] [ T9870] ? kasan_complete_mode_report_info+0x26/0x210 [ 750.348124] [ T9870] kasan_report+0xe7/0x130 [ 750.348128] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348262] [ T9870] ? smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348377] [ T9870] __asan_report_store8_noabort+0x17/0x30 [ 750.348381] [ T9870] smb_set_sge+0x2cc/0x3b0 [cifs] [ 750.348496] [ T9870] smbd_post_send_iter+0x1990/0x3070 [cifs] [ 750.348625] [ T9870] ? __pfx_smbd_post_send_iter+0x10/0x10 [cifs] [ 750.348741] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348749] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348870] [ T9870] ? cifs_flush+0x153/0x320 [cifs] [ 750.348990] [ T9870] ? update_stack_state+0x2a0/0x670 [ 750.348995] [ T9870] smbd_send+0x58c/0x9c0 [cifs] [ 750.349117] [ T9870] ? __pfx_smbd_send+0x10/0x10 [cifs] [ 750.349231] [ T9870] ? unwind_get_return_address+0x65/0xb0 [ 750.349235] [ T9870] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 750.349242] [ T9870] ? arch_stack_walk+0xa7/0x100 [ 750.349250] [ T9870] ? stack_trace_save+0x92/0xd0 [ 750.349254] [ T9870] __smb_send_rqst+0x931/0xec0 [cifs] [ 750.349374] [ T9870] ? kernel_text_address+0x173/0x190 [ 750.349379] [ T9870] ? kasan_save_stack+0x39/0x70 [ 750.349382] [ T9870] ? kasan_save_track+0x18/0x70 [ 750.349385] [ T9870] ? __kasan_slab_alloc+0x9d/0xa0 [ 750.349389] [ T9870] ? __pfx___smb_send_rqst+0x10/0x10 [cifs] [ 750.349508] [ T9870] ? smb2_mid_entry_alloc+0xb4/0x7e0 [cifs] [ 750.349626] [ T9870] ? cifs_call_async+0x277/0xb00 [cifs] [ 750.349746] [ T9870] ? cifs_issue_write+0x256/0x610 [cifs] [ 750.349867] [ T9870] ? netfs_do_issue_write+0xc2/0x340 [netfs] [ 750.349900] [ T9870] ? netfs_advance_write+0x45b/0x1270 [netfs] [ 750.349929] [ T9870] ? netfs_write_folio+0xd6c/0x1be0 [netfs] [ 750.349958] [ T9870] ? netfs_writepages+0x2e9/0xa80 [netfs] [ 750.349987] [ T9870] ? do_writepages+0x21f/0x590 [ 750.349993] [ T9870] ? filemap_fdatawrite_wbc+0xe1/0x140 [ 750.349997] [ T9870] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 750.350002] [ T9870] smb_send_rqst+0x22e/0x2f0 [cifs] [ 750.350131] [ T9870] ? __pfx_smb_send_rqst+0x10/0x10 [cifs] [ 750.350255] [ T9870] ? local_clock_noinstr+0xe/0xd0 [ 750.350261] [ T9870] ? kasan_save_alloc_info+0x37/0x60 [ 750.350268] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350271] [ T9870] ? _raw_spin_lock+0x81/0xf0 [ 750.350275] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350278] [ T9870] ? smb2_setup_async_request+0x293/0x580 [cifs] [ 750.350398] [ T9870] cifs_call_async+0x477/0xb00 [cifs] [ 750.350518] [ T9870] ? __pfx_smb2_writev_callback+0x10/0x10 [cifs] [ 750.350636] [ T9870] ? __pfx_cifs_call_async+0x10/0x10 [cifs] [ 750.350756] [ T9870] ? __pfx__raw_spin_lock+0x10/0x10 [ 750.350760] [ T9870] ? __kasan_check_write+0x14/0x30 [ 750.350763] [ T98 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: kernfs: fix use-after-free in __kernfs_remove Syzkaller managed to trigger concurrent calls to kernfs_remove_by_name_ns() for the same file resulting in a KASAN detected use-after-free. The race occurs when the root node is freed during kernfs_drain(). To prevent this acquire an additional reference for the root of the tree that is removed before calling __kernfs_remove(). Found by syzkaller with the following reproducer (slab_nomerge is required): syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0) r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0) close(r0) pipe2(&(0x7f0000000140)={0xffffffffffffffff, <r1=>0xffffffffffffffff}, 0x800) mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}}) Sample report: ================================================================== BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline] BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857 CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433 kasan_report+0xa3/0x130 mm/kasan/report.c:495 kernfs_type include/linux/kernfs.h:335 [inline] kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f725f983aed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000 RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000 R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000 </TASK> Allocated by task 855: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:7 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Prevent out-of-bounds memory access The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)fff ---truncated---

An issue was discovered in the Linux kernel through 5.11.6. fastrpc_internal_invoke in drivers/misc/fastrpc.c does not prevent user applications from sending kernel RPC messages, aka CID-20c40794eb85. This is a related issue to CVE-2019-2308.

In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete "slow_task->timer". However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below: (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ... sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the "task->slow_task" is deallocated.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers() The last case label can write two buffers 'mc_reg_address[j]' and 'mc_data[j]' with 'j' offset equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE since there are no checks for this value in both case labels after the last 'j++'. Instead of changing '>' to '>=' there, add the bounds check at the start of the second 'case' (the first one already has it). Also, remove redundant last checks for 'j' index bigger than array size. The expression is always false. Moreover, before or after the patch 'table->last' can be equal to SMC_NISLANDS_MC_REGISTER_ARRAY_SIZE and it seems it can be a valid value. Detected using the static analysis tool - Svace.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix double free on tx path. We see kernel crashes and lockups and KASAN errors related to ax210 firmware crashes. One of the KASAN dumps pointed at the tx path, and it appears there is indeed a way to double-free an skb. If iwl_mvm_tx_skb_sta returns non-zero, then the 'skb' sent into the method will be freed. But, in case where we build TSO skb buffer, the skb may also be freed in error case. So, return 0 in that particular error case and do cleanup manually. BUG: KASAN: use-after-free in __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000000 | tsf hi Read of size 8 at addr ffff88813cfa4ba0 by task btserver/9650 CPU: 4 PID: 9650 Comm: btserver Tainted: G W 5.19.8+ #5 iwlwifi 0000:06:00.0: 0x00000000 | time gp1 Hardware name: Default string Default string/SKYBAY, BIOS 5.12 02/19/2019 Call Trace: <TASK> dump_stack_lvl+0x55/0x6d print_report.cold.12+0xf2/0x684 iwlwifi 0000:06:00.0: 0x1D0915A8 | time gp2 ? __list_del_entry_valid+0x12/0x90 kasan_report+0x8b/0x180 iwlwifi 0000:06:00.0: 0x00000001 | uCode revision type ? __list_del_entry_valid+0x12/0x90 __list_del_entry_valid+0x12/0x90 iwlwifi 0000:06:00.0: 0x00000048 | uCode version major tcp_update_skb_after_send+0x5d/0x170 __tcp_transmit_skb+0xb61/0x15c0 iwlwifi 0000:06:00.0: 0xDAA05125 | uCode version minor ? __tcp_select_window+0x490/0x490 iwlwifi 0000:06:00.0: 0x00000420 | hw version ? trace_kmalloc_node+0x29/0xd0 ? __kmalloc_node_track_caller+0x12a/0x260 ? memset+0x1f/0x40 ? __build_skb_around+0x125/0x150 ? __alloc_skb+0x1d4/0x220 ? skb_zerocopy_clone+0x55/0x230 iwlwifi 0000:06:00.0: 0x00489002 | board version ? kmalloc_reserve+0x80/0x80 ? rcu_read_lock_bh_held+0x60/0xb0 tcp_write_xmit+0x3f1/0x24d0 iwlwifi 0000:06:00.0: 0x034E001C | hcmd ? __check_object_size+0x180/0x350 iwlwifi 0000:06:00.0: 0x24020000 | isr0 tcp_sendmsg_locked+0x8a9/0x1520 iwlwifi 0000:06:00.0: 0x01400000 | isr1 ? tcp_sendpage+0x50/0x50 iwlwifi 0000:06:00.0: 0x48F0000A | isr2 ? lock_release+0xb9/0x400 ? tcp_sendmsg+0x14/0x40 iwlwifi 0000:06:00.0: 0x00C3080C | isr3 ? lock_downgrade+0x390/0x390 ? do_raw_spin_lock+0x114/0x1d0 iwlwifi 0000:06:00.0: 0x00200000 | isr4 ? rwlock_bug.part.2+0x50/0x50 iwlwifi 0000:06:00.0: 0x034A001C | last cmd Id ? rwlock_bug.part.2+0x50/0x50 ? lockdep_hardirqs_on_prepare+0xe/0x200 iwlwifi 0000:06:00.0: 0x0000C2F0 | wait_event ? __local_bh_enable_ip+0x87/0xe0 ? inet_send_prepare+0x220/0x220 iwlwifi 0000:06:00.0: 0x000000C4 | l2p_control tcp_sendmsg+0x22/0x40 sock_sendmsg+0x5f/0x70 iwlwifi 0000:06:00.0: 0x00010034 | l2p_duration __sys_sendto+0x19d/0x250 iwlwifi 0000:06:00.0: 0x00000007 | l2p_mhvalid ? __ia32_sys_getpeername+0x40/0x40 iwlwifi 0000:06:00.0: 0x00000000 | l2p_addr_match ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_sched_held+0x5a/0xd0 ? lock_release+0xb9/0x400 ? lock_downgrade+0x390/0x390 ? ktime_get+0x64/0x130 ? ktime_get+0x8d/0x130 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_held_common+0x12/0x50 ? rcu_read_lock_sched_held+0x5a/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_sendto+0x6f/0x80 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f1d126e4531 Code: 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 35 80 0c 00 41 89 ca 8b 00 85 c0 75 1c 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 67 c3 66 0f 1f 44 00 00 55 48 83 ec 20 48 89 RSP: 002b:00007ffe21a679d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000000000000ffdc RCX: 00007f1d126e4531 RDX: 0000000000010000 RSI: 000000000374acf0 RDI: 0000000000000014 RBP: 00007ffe21a67ac0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ACPI: tables: FPDT: Don't call acpi_os_map_memory() on invalid phys address On a Packard Bell Dot SC (Intel Atom N2600 model) there is a FPDT table which contains invalid physical addresses, with high bits set which fall outside the range of the CPU-s supported physical address range. Calling acpi_os_map_memory() on such an invalid phys address leads to the below WARN_ON in ioremap triggering resulting in an oops/stacktrace. Add code to verify the physical address before calling acpi_os_map_memory() to fix / avoid the oops. [ 1.226900] ioremap: invalid physical address 3001000000000000 [ 1.226949] ------------[ cut here ]------------ [ 1.226962] WARNING: CPU: 1 PID: 1 at arch/x86/mm/ioremap.c:200 __ioremap_caller.cold+0x43/0x5f [ 1.226996] Modules linked in: [ 1.227016] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc3+ #490 [ 1.227029] Hardware name: Packard Bell dot s/SJE01_CT, BIOS V1.10 07/23/2013 [ 1.227038] RIP: 0010:__ioremap_caller.cold+0x43/0x5f [ 1.227054] Code: 96 00 00 e9 f8 af 24 ff 89 c6 48 c7 c7 d8 0c 84 99 e8 6a 96 00 00 e9 76 af 24 ff 48 89 fe 48 c7 c7 a8 0c 84 99 e8 56 96 00 00 <0f> 0b e9 60 af 24 ff 48 8b 34 24 48 c7 c7 40 0d 84 99 e8 3f 96 00 [ 1.227067] RSP: 0000:ffffb18c40033d60 EFLAGS: 00010286 [ 1.227084] RAX: 0000000000000032 RBX: 3001000000000000 RCX: 0000000000000000 [ 1.227095] RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00000000ffffffff [ 1.227105] RBP: 3001000000000000 R08: 0000000000000000 R09: ffffb18c40033c18 [ 1.227115] R10: 0000000000000003 R11: ffffffff99d62fe8 R12: 0000000000000008 [ 1.227124] R13: 0003001000000000 R14: 0000000000001000 R15: 3001000000000000 [ 1.227135] FS: 0000000000000000(0000) GS:ffff913a3c080000(0000) knlGS:0000000000000000 [ 1.227146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.227156] CR2: 0000000000000000 CR3: 0000000018c26000 CR4: 00000000000006e0 [ 1.227167] Call Trace: [ 1.227176] <TASK> [ 1.227185] ? acpi_os_map_iomem+0x1c9/0x1e0 [ 1.227215] ? kmem_cache_alloc_trace+0x187/0x370 [ 1.227254] acpi_os_map_iomem+0x1c9/0x1e0 [ 1.227288] acpi_init_fpdt+0xa8/0x253 [ 1.227308] ? acpi_debugfs_init+0x1f/0x1f [ 1.227339] do_one_initcall+0x5a/0x300 [ 1.227406] ? rcu_read_lock_sched_held+0x3f/0x80 [ 1.227442] kernel_init_freeable+0x28b/0x2cc [ 1.227512] ? rest_init+0x170/0x170 [ 1.227538] kernel_init+0x16/0x140 [ 1.227552] ret_from_fork+0x1f/0x30 [ 1.227639] </TASK> [ 1.227647] irq event stamp: 186819 [ 1.227656] hardirqs last enabled at (186825): [<ffffffff98184a6e>] __up_console_sem+0x5e/0x70 [ 1.227672] hardirqs last disabled at (186830): [<ffffffff98184a53>] __up_console_sem+0x43/0x70 [ 1.227686] softirqs last enabled at (186576): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160 [ 1.227701] softirqs last disabled at (186569): [<ffffffff980fbc9d>] __irq_exit_rcu+0xed/0x160 [ 1.227715] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: adopts refcnt to avoid UAF dvb_unregister_device() is known that prone to use-after-free. That is, the cleanup from dvb_unregister_device() releases the dvb_device even if there are pointers stored in file->private_data still refer to it. This patch adds a reference counter into struct dvb_device and delays its deallocation until no pointer refers to the object.

In the Linux kernel, the following vulnerability has been resolved: media: si470x: Fix use-after-free in si470x_int_in_callback() syzbot reported use-after-free in si470x_int_in_callback() [1]. This indicates that urb->context, which contains struct si470x_device object, is freed when si470x_int_in_callback() is called. The cause of this issue is that si470x_int_in_callback() is called for freed urb. si470x_usb_driver_probe() calls si470x_start_usb(), which then calls usb_submit_urb() and si470x_start(). If si470x_start_usb() fails, si470x_usb_driver_probe() doesn't kill urb, but it just frees struct si470x_device object, as depicted below: si470x_usb_driver_probe() ... si470x_start_usb() ... usb_submit_urb() retval = si470x_start() return retval if (retval < 0) free struct si470x_device object, but don't kill urb This patch fixes this issue by killing urb when si470x_start_usb() fails and urb is submitted. If si470x_start_usb() fails and urb is not submitted, i.e. submitting usb fails, it just frees struct si470x_device object.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free bug of ns_writer on remount If a nilfs2 filesystem is downgraded to read-only due to metadata corruption on disk and is remounted read/write, or if emergency read-only remount is performed, detaching a log writer and synchronizing the filesystem can be done at the same time. In these cases, use-after-free of the log writer (hereinafter nilfs->ns_writer) can happen as shown in the scenario below: Task1 Task2 -------------------------------- ------------------------------ nilfs_construct_segment nilfs_segctor_sync init_wait init_waitqueue_entry add_wait_queue schedule nilfs_remount (R/W remount case) nilfs_attach_log_writer nilfs_detach_log_writer nilfs_segctor_destroy kfree finish_wait _raw_spin_lock_irqsave __raw_spin_lock_irqsave do_raw_spin_lock debug_spin_lock_before <-- use-after-free While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1 waked up, Task1 accesses nilfs->ns_writer which is already freed. This scenario diagram is based on the Shigeru Yoshida's post [1]. This patch fixes the issue by not detaching nilfs->ns_writer on remount so that this UAF race doesn't happen. Along with this change, this patch also inserts a few necessary read-only checks with superblock instance where only the ns_writer pointer was used to check if the filesystem is read-only.

In the Linux kernel, the following vulnerability has been resolved: power: supply: core: Fix boundary conditions in interpolation The functions power_supply_temp2resist_simple and power_supply_ocv2cap_simple handle boundary conditions incorrectly. The change was introduced in a4585ba2050f460f749bbaf2b67bd56c41e30283 ("power: supply: core: Use library interpolation"). There are two issues: First, the lines "high = i - 1" and "high = i" in ocv2cap have the wrong order compared to temp2resist. As a consequence, ocv2cap sets high=-1 if ocv>table[0].ocv, which causes an out-of-bounds read. Second, the logic of temp2resist is also not correct. Consider the case table[] = {{20, 100}, {10, 80}, {0, 60}}. For temp=5, we expect a resistance of 70% by interpolation. However, temp2resist sets high=low=2 and returns 60.

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() We got a syzkaller problem because of aarch64 alignment fault if KFENCE enabled. When the size from user bpf program is an odd number, like 399, 407, etc, it will cause the struct skb_shared_info's unaligned access. As seen below: BUG: KFENCE: use-after-free read in __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 Use-after-free read at 0xffff6254fffac077 (in kfence-#213): __lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline] arch_atomic_add arch/arm64/include/asm/atomic.h:28 [inline] arch_atomic_inc include/linux/atomic-arch-fallback.h:270 [inline] atomic_inc include/asm-generic/atomic-instrumented.h:241 [inline] __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 skb_clone+0xf4/0x214 net/core/skbuff.c:1481 ____bpf_clone_redirect net/core/filter.c:2433 [inline] bpf_clone_redirect+0x78/0x1c0 net/core/filter.c:2420 bpf_prog_d3839dd9068ceb51+0x80/0x330 bpf_dispatcher_nop_func include/linux/bpf.h:728 [inline] bpf_test_run+0x3c0/0x6c0 net/bpf/test_run.c:53 bpf_prog_test_run_skb+0x638/0xa7c net/bpf/test_run.c:594 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 kfence-#213: 0xffff6254fffac000-0xffff6254fffac196, size=407, cache=kmalloc-512 allocated by task 15074 on cpu 0 at 1342.585390s: kmalloc include/linux/slab.h:568 [inline] kzalloc include/linux/slab.h:675 [inline] bpf_test_init.isra.0+0xac/0x290 net/bpf/test_run.c:191 bpf_prog_test_run_skb+0x11c/0xa7c net/bpf/test_run.c:512 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 __arm64_sys_bpf+0x50/0x60 kernel/bpf/syscall.c:4381 To fix the problem, we adjust @size so that (@size + @hearoom) is a multiple of SMP_CACHE_BYTES. So we make sure the struct skb_shared_info is aligned to a cache line.

In the Linux kernel, the following vulnerability has been resolved: net: mdio: fix undefined behavior in bit shift for __mdiobus_register Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c __mdiobus_register+0x49d/0x4e0 fixed_mdio_bus_init+0xd8/0x12d do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup Commit b3c9a924aab6 ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove") fixed a use-after-free error due the vesafb driver freeing the fb_info in the .remove handler instead of doing it in .fb_destroy. This can happen if the .fb_destroy callback is executed after the .remove callback, since the former tries to access a pointer freed by the latter. But that change didn't take into account that another possible scenario is that .fb_destroy is called before the .remove callback. For example, if no process has the fbdev chardev opened by the time the driver is removed. If that's the case, fb_info will be freed when unregister_framebuffer() is called, making the fb_info pointer accessed in vesafb_remove() after that to no longer be valid. To prevent that, move the expression containing the info->par to happen before the unregister_framebuffer() function call.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on curseg->alloc_type As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215657 - Overview UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image - Reproduce tested on kernel 5.17-rc4, 5.17-rc6 1. mkdir test_crash 2. cd test_crash 3. unzip tmp2.zip 4. mkdir mnt 5. ./single_test.sh f2fs 2 - Kernel dump [ 46.434454] loop0: detected capacity change from 0 to 131072 [ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9 [ 46.738319] ================================================================================ [ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 [ 46.738475] index 231 is out of range for type 'unsigned int [2]' [ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1 [ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 46.738551] Call Trace: [ 46.738556] <TASK> [ 46.738563] dump_stack_lvl+0x47/0x5c [ 46.738581] ubsan_epilogue+0x5/0x50 [ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80 [ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs] [ 46.738819] do_write_page+0xef/0x210 [f2fs] [ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs] [ 46.739038] __write_node_page+0x2b7/0x920 [f2fs] [ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs] [ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs] [ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs] [ 46.739507] deactivate_locked_super+0x60/0xc0 [ 46.739517] deactivate_super+0x70/0xb0 [ 46.739524] cleanup_mnt+0x11a/0x200 [ 46.739532] __cleanup_mnt+0x16/0x20 [ 46.739538] task_work_run+0x67/0xa0 [ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0 [ 46.739559] syscall_exit_to_user_mode+0x26/0x40 [ 46.739568] do_syscall_64+0x46/0xb0 [ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is we missed to do sanity check on curseg->alloc_type, result in out-of-bound accessing on sbi->block_count[] array, fix it.

In the Linux kernel before 5.4.2, the io_uring feature leads to requests that inadvertently have UID 0 and full capabilities, aka CID-181e448d8709. This is related to fs/io-wq.c, fs/io_uring.c, and net/socket.c. For example, an attacker can bypass intended restrictions on adding an IPv4 address to the loopback interface. This occurs because IORING_OP_SENDMSG operations, although requested in the context of an unprivileged user, are sometimes performed by a kernel worker thread without considering that context.

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix double free issue on err path fix error path handling in prestera_bridge_port_join() that cases prestera driver to crash (see below). Trace: Internal error: Oops: 96000044 [#1] SMP Modules linked in: prestera_pci prestera uio_pdrv_genirq CPU: 1 PID: 881 Comm: ip Not tainted 5.15.0 #1 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : prestera_bridge_destroy+0x2c/0xb0 [prestera] lr : prestera_bridge_port_join+0x2cc/0x350 [prestera] sp : ffff800011a1b0f0 ... x2 : ffff000109ca6c80 x1 : dead000000000100 x0 : dead000000000122 Call trace: prestera_bridge_destroy+0x2c/0xb0 [prestera] prestera_bridge_port_join+0x2cc/0x350 [prestera] prestera_netdev_port_event.constprop.0+0x3c4/0x450 [prestera] prestera_netdev_event_handler+0xf4/0x110 [prestera] raw_notifier_call_chain+0x54/0x80 call_netdevice_notifiers_info+0x54/0xa0 __netdev_upper_dev_link+0x19c/0x380

In the Linux kernel, the following vulnerability has been resolved: ceph: avoid putting the realm twice when decoding snaps fails When decoding the snaps fails it maybe leaving the 'first_realm' and 'realm' pointing to the same snaprealm memory. And then it'll put it twice and could cause random use-after-free, BUG_ON, etc issues.

In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Fix early region not updated correctly The shadow's page table is not updated when PTE_RPN_SHIFT is 24 and PAGE_SHIFT is 12. It not only causes false positives but also false negative as shown the following text. Fix it by bringing the logic of kasan_early_shadow_page_entry here. 1. False Positive: ================================================================== BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50 Write of size 16 at addr f57f3be0 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1 Call Trace: [c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable) [c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300 [c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200 [c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0 [c80d1cc0] [c03018a4] memset+0x34/0x90 [c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50 [c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570 [c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0 [c80d1db0] [c2036580] init_sd+0xc4/0x1d0 [c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c [c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384 [c80d1ef0] [c0004b14] kernel_init+0x24/0x170 [c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64 Memory state around the buggy address: f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== 2. False Negative (with KASAN tests): ================================================================== Before fix: ok 45 - kmalloc_double_kzfree # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039 KASAN failure expected in "((volatile char *)area)[3100]", but none occurred not ok 46 - vmalloc_oob not ok 1 - kasan ================================================================== After fix: ok 1 - kasan

In the Linux kernel, the following vulnerability has been resolved: sch_cake: do not call cake_destroy() from cake_init() qdiscs are not supposed to call their own destroy() method from init(), because core stack already does that. syzbot was able to trigger use after free: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock_common kernel/locking/mutex.c:586 [inline] WARNING: CPU: 0 PID: 21902 at kernel/locking/mutex.c:586 __mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Modules linked in: CPU: 0 PID: 21902 Comm: syz-executor189 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mutex_lock_common kernel/locking/mutex.c:586 [inline] RIP: 0010:__mutex_lock+0x9ec/0x12f0 kernel/locking/mutex.c:740 Code: 08 84 d2 0f 85 19 08 00 00 8b 05 97 38 4b 04 85 c0 0f 85 27 f7 ff ff 48 c7 c6 20 00 ac 89 48 c7 c7 a0 fe ab 89 e8 bf 76 ba ff <0f> 0b e9 0d f7 ff ff 48 8b 44 24 40 48 8d b8 c8 08 00 00 48 89 f8 RSP: 0018:ffffc9000627f290 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802315d700 RSI: ffffffff815f1db8 RDI: fffff52000c4fe44 RBP: ffff88818f28e000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ebb5e R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffffc9000627f458 R15: 0000000093c30000 FS: 0000555556abc400(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fda689c3303 CR3: 000000001cfbb000 CR4: 0000000000350ef0 Call Trace: <TASK> tcf_chain0_head_change_cb_del+0x2e/0x3d0 net/sched/cls_api.c:810 tcf_block_put_ext net/sched/cls_api.c:1381 [inline] tcf_block_put_ext net/sched/cls_api.c:1376 [inline] tcf_block_put+0xbc/0x130 net/sched/cls_api.c:1394 cake_destroy+0x3f/0x80 net/sched/sch_cake.c:2695 qdisc_create.constprop.0+0x9da/0x10f0 net/sched/sch_api.c:1293 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1bb06badb9 Code: Unable to access opcode bytes at RIP 0x7f1bb06bad8f. RSP: 002b:00007fff3012a658 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1bb06badb9 RDX: 0000000000000000 RSI: 00000000200007c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000003 R11: 0000000000000246 R12: 00007fff3012a688 R13: 00007fff3012a6a0 R14: 00007fff3012a6e0 R15: 00000000000013c2 </TASK>

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID.

In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Fix free_irq() on remove Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ...

Guest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associated with queue 0 will have already exited and thus the call to kthread_stop will be performed against a stale pointer.

In the Linux kernel, the following vulnerability has been resolved: ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855 Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 534.888716] Call Trace: [ 534.888720] <IRQ> [ 534.888726] dump_stack_lvl+0x57/0x7d [ 534.888736] print_address_description.constprop.0+0x1f/0x170 [ 534.888745] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888771] kasan_report.cold+0x83/0xdf [ 534.888783] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888810] ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888840] ath11k_dp_rx_process_mon_status+0x529/0xa70 [ath11k] [ 534.888874] ? ath11k_dp_rx_mon_status_bufs_replenish+0x3f0/0x3f0 [ath11k] [ 534.888897] ? check_prev_add+0x20f0/0x20f0 [ 534.888922] ? __lock_acquire+0xb72/0x1870 [ 534.888937] ? find_held_lock+0x33/0x110 [ 534.888954] ath11k_dp_rx_process_mon_rings+0x297/0x520 [ath11k] [ 534.888981] ? rcu_read_unlock+0x40/0x40 [ 534.888990] ? ath11k_dp_rx_pdev_alloc+0xd90/0xd90 [ath11k] [ 534.889026] ath11k_dp_service_mon_ring+0x67/0xe0 [ath11k] [ 534.889053] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889075] call_timer_fn+0x167/0x4a0 [ 534.889084] ? add_timer_on+0x3b0/0x3b0 [ 534.889103] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889117] __run_timers.part.0+0x539/0x8b0 [ 534.889123] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889157] ? call_timer_fn+0x4a0/0x4a0 [ 534.889164] ? mark_lock_irq+0x1c30/0x1c30 [ 534.889173] ? clockevents_program_event+0xdd/0x280 [ 534.889189] ? mark_held_locks+0xa5/0xe0 [ 534.889203] run_timer_softirq+0x97/0x180 [ 534.889213] __do_softirq+0x276/0x86a [ 534.889230] __irq_exit_rcu+0x11c/0x180 [ 534.889238] irq_exit_rcu+0x5/0x20 [ 534.889244] sysvec_apic_timer_interrupt+0x8e/0xc0 [ 534.889251] </IRQ> [ 534.889254] <TASK> [ 534.889259] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 534.889265] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 534.889271] Code: 74 24 10 e8 ea c2 bf fd 48 89 ef e8 12 53 c0 fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 13 a7 b5 fd 65 8b 05 cc d9 9c 5e 85 c0 74 0a 5b 5d c3 e8 a0 ee [ 534.889276] RSP: 0018:ffffc90002e5f880 EFLAGS: 00000206 [ 534.889284] RAX: 0000000000000006 RBX: 0000000000000200 RCX: ffffffff9f256f10 [ 534.889289] RDX: 0000000000000000 RSI: ffffffffa1c6e420 RDI: 0000000000000001 [ 534.889293] RBP: ffff8881095e6200 R08: 0000000000000001 R09: ffffffffa40d2b8f [ 534.889298] R10: fffffbfff481a571 R11: 0000000000000001 R12: ffff8881095e6e68 [ 534.889302] R13: ffffc90002e5f908 R14: 0000000000000246 R15: 0000000000000000 [ 534.889316] ? mark_lock+0xd0/0x14a0 [ 534.889332] klist_next+0x1d4/0x450 [ 534.889340] ? dpm_wait_for_subordinate+0x2d0/0x2d0 [ 534.889350] device_for_each_child+0xa8/0x140 [ 534.889360] ? device_remove_class_symlinks+0x1b0/0x1b0 [ 534.889370] ? __lock_release+0x4bd/0x9f0 [ 534.889378] ? dpm_suspend+0x26b/0x3f0 [ 534.889390] dpm_wait_for_subordinate+ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Don't redirect packets with invalid pkt_len Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any skbs, that is, the flow->head is null. The root cause, as the [2] says, is because that bpf_prog_test_run_skb() run a bpf prog which redirects empty skbs. So we should determine whether the length of the packet modified by bpf prog or others like bpf_prog_test is valid before forwarding it directly.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: add missing boundary check in vm_access A missing bounds check in vm_access() can lead to an out-of-bounds read or write in the adjacent memory area, since the len attribute is not validated before the memcpy later in the function, potentially hitting: [ 183.637831] BUG: unable to handle page fault for address: ffffc90000c86000 [ 183.637934] #PF: supervisor read access in kernel mode [ 183.637997] #PF: error_code(0x0000) - not-present page [ 183.638059] PGD 100000067 P4D 100000067 PUD 100258067 PMD 106341067 PTE 0 [ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI [ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1 [ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.1905301319 05/30/2019 [ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10 [ 183.640213] RSP: 0018:ffffc90001763d48 EFLAGS: 00010246 [ 183.641117] RAX: ffff888109c14000 RBX: ffff888111bece40 RCX: 0000000000000ffc [ 183.642029] RDX: 0000000000001000 RSI: ffffc90000c86000 RDI: ffff888109c14004 [ 183.642946] RBP: 0000000000000ffc R08: 800000000000016b R09: 0000000000000000 [ 183.643848] R10: ffffc90000c85000 R11: 0000000000000048 R12: 0000000000001000 [ 183.644742] R13: ffff888111bed190 R14: ffff888109c14000 R15: 0000000000001000 [ 183.645653] FS: 00007fe5ef807540(0000) GS:ffff88845b380000(0000) knlGS:0000000000000000 [ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 183.647481] CR2: ffffc90000c86000 CR3: 000000010ff02006 CR4: 00000000003706e0 [ 183.648384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 183.649271] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 183.650142] Call Trace: [ 183.650988] <TASK> [ 183.651793] vm_access+0x1f0/0x2a0 [i915] [ 183.652726] __access_remote_vm+0x224/0x380 [ 183.653561] mem_rw.isra.0+0xf9/0x190 [ 183.654402] vfs_read+0x9d/0x1b0 [ 183.655238] ksys_read+0x63/0xe0 [ 183.656065] do_syscall_64+0x38/0xc0 [ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 183.657663] RIP: 0033:0x7fe5ef725142 [ 183.659351] RSP: 002b:00007ffe1e81c7e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 183.660227] RAX: ffffffffffffffda RBX: 0000557055dfb780 RCX: 00007fe5ef725142 [ 183.661104] RDX: 0000000000001000 RSI: 00007ffe1e81d880 RDI: 0000000000000005 [ 183.661972] RBP: 00007ffe1e81e890 R08: 0000000000000030 R09: 0000000000000046 [ 183.662832] R10: 0000557055dfc2e0 R11: 0000000000000246 R12: 0000557055dfb1c0 [ 183.663691] R13: 00007ffe1e81e980 R14: 0000000000000000 R15: 0000000000000000 Changes since v1: - Updated if condition with range_overflows_t [Chris Wilson] [mauld: tidy up the commit message and add Cc: stable] (cherry picked from commit 661412e301e2ca86799aa4f400d1cf0bd38c57c6)

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix use after free in remove_phb_dynamic() In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: pid: take a reference when initializing `cad_pid` During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`. Full KASAN splat below. ================================================================== BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270: slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions() If an error occurs in dsa_devlink_region_create(), then 'priv->regions' array will be accessed by negative index '-1'. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: fbmem: Do not delete the mode that is still in use The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9

In the Linux kernel, the following vulnerability has been resolved: net: fix use-after-free in tw_timer_handler A real world panic issue was found as follow in Linux 5.4. BUG: unable to handle page fault for address: ffffde49a863de28 PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0 RIP: 0010:tw_timer_handler+0x20/0x40 Call Trace: <IRQ> call_timer_fn+0x2b/0x120 run_timer_softirq+0x1ef/0x450 __do_softirq+0x10d/0x2b8 irq_exit+0xc7/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 This issue was also reported since 2017 in the thread [1], unfortunately, the issue was still can be reproduced after fixing DCCP. The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net namespace is destroyed since tcp_sk_ops is registered befrore ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops in the list of pernet_list. There will be a use-after-free on net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net if there are some inflight time-wait timers. This bug is not introduced by commit f2bf415cfed7 ("mib: add net to NET_ADD_STATS_BH") since the net_statistics is a global variable instead of dynamic allocation and freeing. Actually, commit 61a7e26028b9 ("mib: put net statistics on struct net") introduces the bug since it put net statistics on struct net and free it when net namespace is destroyed. Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug and replace pr_crit() with panic() since continuing is meaningless when init_ipv4_mibs() fails. [1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1

In the Linux kernel, the following vulnerability has been resolved: regmap: set debugfs_name to NULL after it is freed There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed.