Wrongthink peer-to-peer, end-to-end encrypted messenger with PeerJS and Axolotl ratchet. In wrongthink from version 2.0.0 and before 2.3.0 there was a set of vulnerabilities causing inadequate encryption strength. Part of the secret identity key was disclosed by the fingerprint used for connection. Additionally, the safety number was improperly calculated. It was computed using part of one of the public identity keys instead of being derived from both public identity keys. This caused issues in computing safety numbers which would potentially be exploitable in the real world. Additionally there was inadequate encryption strength due to use of 1024-bit DSA keys. These issues are all fixed in version 2.3.0.
In curl before 7.86.0, the HSTS check could be bypassed to trick it into staying with HTTP. Using its HSTS support, curl can be instructed to use HTTPS directly (instead of using an insecure cleartext HTTP step) even when HTTP is provided in the URL. This mechanism could be bypassed if the host name in the given URL uses IDN characters that get replaced with ASCII counterparts as part of the IDN conversion, e.g., using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop of U+002E (.). The earliest affected version is 7.77.0 2021-05-26.
Cleartext Transmission of Sensitive InformationCleartext transmission of sensitive information vulnerability in MELSEC iQ-R series Safety CPU R08/16/32/120SFCPU firmware versions "26" and prior and MELSEC iQ-R series SIL2 Process CPU R08/16/32/120PSFCPU firmware versions "11" and prior allows a remote unauthenticated attacker to login to a target CPU module by obtaining credentials other than password.
In Fibaro Home Center 2 and Lite devices in all versions provide a web based management interface over unencrypted HTTP protocol. Communication between the user and the device can be eavesdropped to hijack sessions, tokens and passwords.
IBM Security Verify Information Queue 1.0.6 and 1.0.7 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 196188.
Trendnet AC2600 TEW-827DRU version 2.08B01 contains an security flaw in the web interface. HTTPS is not enabled on the device by default. This results in cleartext transmission of sensitive information such as passwords.
Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the web interface. By default, all communication to/from the device's web interface is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.
A vulnerability exists in curl <7.87.0 HSTS check that could be bypassed to trick it to keep using HTTP. Using its HSTS support, curl can be instructed to use HTTPS instead of using an insecure clear-text HTTP step even when HTTP is provided in the URL. However, the HSTS mechanism could be bypassed if the host name in the given URL first uses IDN characters that get replaced to ASCII counterparts as part of the IDN conversion. Like using the character UTF-8 U+3002 (IDEOGRAPHIC FULL STOP) instead of the common ASCII full stop (U+002E) `.`. Then in a subsequent request, it does not detect the HSTS state and makes a clear text transfer. Because it would store the info IDN encoded but look for it IDN decoded.
Cleartext Transmission of Sensitive Information vulnerability in Hitachi Device Manager on Windows, Linux (Device Manager Server, Device Manager Agent, Host Data Collector components) allows Interception.This issue affects Hitachi Device Manager: before 8.8.5-02.
IBM Security Verify Governance 10.0 does not encrypt sensitive or critical information before storage or transmission. IBM X-Force ID: 256020.
CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists that could result in the exposure of data when network traffic is being sniffed by an attacker.
Communication traffic involving "Ethernet Q Commands" service of Haas Controller version 100.20.000.1110 is transmitted in cleartext. This allows an attacker to obtain sensitive information being passed to and from the controller.
bcrypt password hashing in Botan before 2.1.0 does not correctly handle passwords with a length between 57 and 72 characters, which makes it easier for attackers to determine the cleartext password.
Grand MA 300 allows retrieval of the access PIN from sniffed data.
EMC Dantz Retrospect Backup Client 7.5.116 sends the password hash in cleartext at an unspecified point, which allows remote attackers to obtain sensitive information via a crafted packet.
UPSMON PRO transmits sensitive data in cleartext over HTTP protocol. An unauthenticated remote attacker can exploit this vulnerability to access sensitive data.
A flaw was found in Red Hat OpenShift Data Science. When exporting a pipeline from the Elyra notebook pipeline editor as Python DSL or YAML, it reads S3 credentials from the cluster (ds pipeline server) and saves them in plain text in the generated output instead of an ID for a Kubernetes secret.
SolarWinds N-central before 12.1 SP1 HF5 and 12.2 before SP1 HF2 allows remote attackers to retrieve cleartext domain admin credentials from the Agent & Probe settings, and obtain other sensitive information. The attacker can use a customer ID to self register and read any aspects of the agent/appliance configuration.
Ecovacs Deebot T10 1.7.2 transmits Wi-Fi credentials in cleartext during the pairing process.
A flaw was found in OpenStack. Multiple components show plain-text passwords in /var/log/messages during the OpenStack overcloud update run, leading to a disclosure of sensitive information problem.
The myMail app through 14.30 for iOS sends cleartext credentials in a situation where STARTTLS is expected by a server.
Cleartext transmission of sensitive information in acep-collector service. The following products are affected: Acronis Cyber Protect 16 (Linux, Windows) before build 38690.
In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is transmitted over some web applications in clear text.
An issue in YESCAM (com.yescom.YesCam.zwave) 1.0.2 allows a remote attacker to obtain sensitive information via the firmware update process.
**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause certain data to be visible on the network when the 'password' feature is enabled. This vulnerability was discovered in and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. The 'password' feature is an additional optional check performed by TS1131 that it is connected to a specific controller. This data is sent as clear text and is visible on the network. This feature is not present in TriStation 1131 versions v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions.
Hitron Technologies CODA-5310’s Telnet function transfers sensitive data in plaintext. An unauthenticated remote attacker can exploit this vulnerability to access credentials of normal users and administrator.
A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists which could leak sensitive information transmitted between the software and the Modicon M218, M241, M251, and M258 controllers.
Jenkins Kubernetes Plugin 3909.v1f2c633e8590 and earlier does not properly mask (i.e., replace with asterisks) credentials in the build log when push mode for durable task logging is enabled.
In Moxa EDS-G516E Series firmware, Version 5.2 or lower, sensitive information is transmitted over some web applications in cleartext.
Cleartext transmission of sensitive information. The following products are affected: Acronis Cyber Protect 15 (Linux, Windows) before build 29240
On BIG-IP ASM 11.6.1-11.6.5.1, under certain configurations, the BIG-IP system sends data plane traffic to back-end servers unencrypted, even when a Server SSL profile is applied.
An issue was discovered in Stormshield Network Security (SNS) before 4.3.17, 4.4.x through 4.6.x before 4.6.4, and 4.7.x before 4.7.1. It affects user accounts for which the password has an equals sign or space character. The serverd process logs such passwords in cleartext, and potentially sends these logs to the Syslog component.
This vulnerability exist in Skyworth Router CM5100, version 4.1.1.24, due to transmission of authentication credentials in plaintext over the network. A remote attacker could exploit this vulnerability by eavesdropping on the victim’s network traffic to extract username and password from the web interface (Password Reset Page) of the vulnerable targeted system.
IBM Watson CP4D Data Stores 4.6.0, 4.6.1, 4.6.2, and 4.6.3 does not encrypt sensitive or critical information before storage or transmission which could allow an attacker to obtain sensitive information. IBM X-Force ID: 248740.
Omron CS series, CJ series, and CP series PLCs through 2022-05-18 use cleartext passwords. They feature a UM Protection setting that allows users or system integrators to configure a password in order to restrict sensitive engineering operations (such as project/logic uploads and downloads). This password is set using the OMRON FINS command Program Area Protect and unset using the command Program Area Protect Clear, both of which are transmitted in cleartext.
Cleartext transmission of sensitive information. The following products are affected: Acronis Cyber Protect 15 (Windows) before build 29240
A vulnerability has been identified in SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P850 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00), SICAM P855 (All versions < V3.00). Affected devices do not encrypt web traffic with clients but communicate in cleartext via HTTP. This could allow an unauthenticated attacker to capture the traffic and interfere with the functionality of the device.
DJI drone devices sold in 2017 through 2022 broadcast unencrypted information about the drone operator's physical location via the AeroScope protocol.
OKI C5510MFP Printer CU H2.15, PU 01.03.01, System F/W 1.01, and Web Page 1.00 sends the configuration of the printer in cleartext, which allows remote attackers to obtain the administrative password by connecting to TCP port 5548 or 7777.
Couchbase Server before 6.6.6, 7.x before 7.0.5, and 7.1.x before 7.1.2 exposes Sensitive Information to an Unauthorized Actor.
LOYTEC LINX-151, LINX-212, LVIS-3ME12-A1, LIOB-586, LIOB-580 V2, LIOB-588, L-INX Configurator devices (all versions) send password-change requests via cleartext HTTP.
LS ELECTRIC XBC-DN32U with operating system version 01.80 transmits sensitive information in cleartext when communicating over its XGT protocol. This could allow an attacker to gain sensitive information such as user credentials.
LOYTEC electronics GmbH LINX Configurator (all versions) uses HTTP Basic Authentication, which transmits usernames and passwords in base64-encoded cleartext and allows remote attackers to steal the password and gain full control of Loytec device configuration.
LOYTEC LINX-151, LINX-212, LVIS-3ME12-A1, LIOB-586, LIOB-580 V2, LIOB-588, L-INX Configurator devices (all versions) use cleartext HTTP for login.
SolarWinds Serv-U is submitting an HTTP request when changing or updating the attributes for File Share or File request. Part of the URL of the request discloses sensitive data.
A vulnerability has been identified in COMOS (All versions < V10.4.4). Caching system in the affected application leaks sensitive information such as user and project information in cleartext via UDP.
Procom NetFORCE 800 4.02 M10 Build 20 and possibly other versions sends the NIS password map (passwd.nis) as a file attachment in diagnostic e-mail messages, which allows remote attackers to obtain the cleartext NIS password hashes.
In Modem EMM, there is a possible information disclosure due to a missing data encryption. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY00716585; Issue ID: ALPS05886933.
The Credova_Financial WordPress plugin discloses a site's associated Credova API account username and password in plaintext via an AJAX action whenever a site user goes to checkout on a page that has the Credova Financing option enabled. This affects versions up to, and including, 1.4.8.
AutomationDirect C-more EA9 HTTP webserver uses an insecure mechanism to transport credentials from client to web server, which may allow an attacker to obtain the login credentials and login as a valid user. This issue affects: AutomationDirect C-more EA9 EA9-T6CL versions prior to 6.73; EA9-T6CL-R versions prior to 6.73; EA9-T7CL versions prior to 6.73; EA9-T7CL-R versions prior to 6.73; EA9-T8CL versions prior to 6.73; EA9-T10CL versions prior to 6.73; EA9-T10WCL versions prior to 6.73; EA9-T12CL versions prior to 6.73; EA9-T15CL versions prior to 6.73; EA9-RHMI versions prior to 6.73; EA9-PGMSW versions prior to 6.73;