Unquoted service path vulnerability in McAfee Endpoint Product Removal (EPR) Tool prior to 21.2 allows local administrators to execute arbitrary code, with higher-level privileges, via execution from a compromised folder. The tool did not enforce and protect the execution path. Local admin privileges are required to place the files in the required location.

Privilege Escalation vulnerability in McAfee FRP 5.x prior to 5.1.0.209 allows local users to gain elevated privileges via running McAfee Tray with elevated privileges.

Improper Access Control in attribute in McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 February 2021 Update allows authenticated local administrator user to perform an uninstallation of the anti-malware engine via the running of a specific command with the correct parameters.

Privilege escalation vulnerability in the Windows trial installer of McAfee Total Protection (MTP) prior to 16.0.34_x may allow a local user to run arbitrary code as the admin user by replacing a specific temporary file created during the installation of the trial version of MTP.

McAfee Total Protection prior to 16.0.50 may allow an adversary (with full administrative access) to modify a McAfee specific Component Object Model (COM) in the Windows Registry. This can result in the loading of a malicious payload.

A heap-based overflow vulnerability in Trellix Agent (Windows and Linux) version 5.7.8 and earlier, allows a remote user to alter the page heap in the macmnsvc process memory block resulting in the service becoming unavailable.

DLL Injection Vulnerability in McAfee Agent (MA) for Windows prior to 5.6.6 allows local users to execute arbitrary code via careful placement of a malicious DLL.

Improperly implemented security check in McAfee MVISION Endpoint Detection and Response Client (MVEDR) prior to 3.2.0 may allow local administrators to execute malicious code via stopping a core Windows service leaving McAfee core trust component in an inconsistent state resulting in MVEDR failing open rather than closed

Improperly implemented security check in McAfee Active Response (MAR) prior to 2.4.4 may allow local administrators to execute malicious code via stopping a core Windows service leaving McAfee core trust component in an inconsistent state resulting in MAR failing open rather than closed

Incorrect Permission Assignment for Critical Resource vulnerability in McAfee VirusScan Enterprise (VSE) prior to 8.8 Patch 16 allows local administrators to bypass local security protection through VSE not correctly integrating with Windows Defender Application Control via careful manipulation of the Code Integrity checks.

Improper access control vulnerability in ESconfigTool.exe in McAfee Endpoint Security (ENS) for Windows all current versions allows local administrator to alter ENS configuration up to and including disabling all protection offered by ENS via insecurely implemented encryption of configuration for export and import.

Authentication bypass vulnerability in MfeUpgradeTool in McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 April 2020 Update allows administrator users to access policy settings via running this tool.

A Privilege Escalation vulnerability in the Microsoft Windows client in McAfee Total Protection 16.0.R22 and earlier allows administrators to execute arbitrary code via carefully placing malicious files in specific locations protected by administrator permission.

An uncontrolled search path vulnerability exists in Trellix Agent (TA) for Windows in versions prior to 5.7.8. This allows an attacker with admin access, which is required to place the DLL in the restricted Windows System folder, to elevate their privileges to System by placing a malicious DLL there.

McAfee Enterprise ePolicy Orchestrator (ePO) prior to 5.10 Update 13 allows a local attacker to point an ePO server to an arbitrary SQL server during the restoration of the ePO server. To achieve this the attacker would have to be logged onto the server hosting the ePO server (restricted to administrators) and to know the SQL server password.

Uncontrolled search path element vulnerability in McAfee TechCheck prior to 4.0.0.2 allows a local administrator to load their own Dynamic Link Library (DLL) gaining elevation of privileges to system user. This was achieved through placing the malicious DLL in the same directory that the process was run from.

Unquoted executable path vulnerability in Client Management and Gateway components in McAfee (now Intel Security) ePO Deep Command (eDC) 2.2 and 2.1 allows authenticated users to execute a command of their choice via dropping a malicious file for the path.

An Improper Neutralization of Special Elements used in a command vulnerability in ESM prior to version 11.6.9 allows a remote administrator to execute arbitrary code as root on the ESM. This is possible as the input isn't correctly sanitized when adding a new data source.

Command Injection vulnerability in the web interface in McAfee Advanced Threat Defense (ATD) 3.10, 3.8, 3.6, 3.4 allows remote authenticated users to execute a command of their choice via a crafted HTTP request parameter.

In the Bootloader, there is a possible kernel command injection due to missing command sanitization. This could lead to a local elevation of privilege with System execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-80316910

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.

In netdiag, there is a possible command injection due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-10, Android-11; Patch ID: ALPS05442014.

A shell injection flaw was found in pglogical in versions before 2.3.4 and before 3.6.26. An attacker with CREATEDB privileges on a PostgreSQL server can craft a database name that allows execution of shell commands as the postgresql user when calling pglogical.create_subscription().

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software and Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary commands with elevated privileges on an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input in the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands with elevated privileges on the underlying operating system. An attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root-level privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root-level privileges.

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exists because the affected software does not properly sanitize user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying certain CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, which could result in a complete system compromise.

Dell EMC PowerScale OneFS versions 8.2.x - 9.1.1.x contain an improper neutralization of special elements used in an OS command. This vulnerability could allow the compadmin user to elevate privileges. This only impacts Smartlock WORM compliance mode clusters as a critical vulnerability and Dell recommends to update/upgrade at the earliest opportunity.

Dell CloudLink, versions prior 8.1.1, contain a Command Injection vulnerability which can be exploited by an Authenticated attacker to cause Command Injection on an affected Dell CloudLink.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Xiaomi Xiaomi Router allows Command Injection.

Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file. This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file.

A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS.

Multiple vulnerabilities in specific Cisco Identity Services Engine (ISE) CLI commands could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid Administrator privileges on the affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.

Multiple vulnerabilities in the restricted shell of Cisco Evolved Programmable Network Manager (EPNM), Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to escape the restricted shell and gain root privileges on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco access points (AP) software could allow an authenticated, local attacker to inject arbitrary commands and execute them with root privileges. This vulnerability is due to improper input validation of commands that are issued from a wireless controller to an AP. An attacker with Administrator access to the CLI of the controller could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to gain full root access on the AP.

A vulnerability in a specific Cisco ISE CLI command could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root.

Vulnerability in the CLI of Cisco Secure Email Gateway could allow an authenticated, remote attacker to execute arbitrary commands. These vulnerability is due to improper input validation in the CLI. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands to be executed with root privileges on the underlying operating system. This vulnerability is due to insufficient input validation on certain CLI commands. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to execute commands with root privileges.

In mobile_log_d, there is a possible command injection due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-10, Android-11; Patch ID: ALPS05458478.

In mobile_log_d, there is a possible command injection due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-10, Android-11; Patch ID: ALPS05458478; Issue ID: ALPS05458503.

Improper neutralization of special elements used in a command ('command injection') in Azure Compute Gallery allows an authorized attacker to elevate privileges locally.

In netdiag, there is a possible command injection due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-10, Android-11; Patch ID: ALPS05442022.

Dell SmartFabric OS10 Software, version(s) 10.5.4.x, 10.5.5.x, 10.5.6.x, 10.6.0.x, contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Command execution.

Some Huawei products have a command injection vulnerability. Due to insufficient input validation, an attacker with high privilege may inject some malicious codes in some files of the affected products. Successful exploit may cause command injection.Affected product versions include:NIP6300 versions V500R001C30,V500R001C60;NIP6600 versions V500R001C30,V500R001C60;Secospace USG6300 versions V500R001C30,V500R001C60;Secospace USG6500 versions V500R001C30,V500R001C60;Secospace USG6600 versions V500R001C30,V500R001C60;USG9500 versions V500R001C30,V500R001C60.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects WAC505 before 8.2.1.16 and WAC510 before 8.2.1.16.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6220 before 1.0.0.40, D7000v2 before 1.0.0.74, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.102, DGND2200Bv4 before 1.0.0.102, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, R6250 before 1.0.4.20, R6300v2 before 1.0.4.24, R6400 before 1.0.1.32, R6400v2 before 1.0.2.44, R6700 before 1.0.1.46, R6900 before 1.0.1.46, R7000 before 1.0.9.26, R6900P before 1.3.0.20, R7000P before 1.3.0.20, R7100LG before 1.0.0.40, R7300DST before 1.0.0.62, R7900 before 1.0.2.10, R8000 before 1.0.4.12, R7900P before 1.3.0.10, R8000P before 1.3.0.10, R8300 before 1.0.2.106, R8500 before 1.0.2.106, WN2500RPv2 before 1.0.1.54, WNDR3400v3 before 1.0.1.18, and WNR3500Lv2 before 1.2.0.48.

An attacker with access to a minion key can exploit the 'on demand' pillar functionality with a specially crafted git url which could cause and arbitrary command to be run on the master with the same privileges as the master process.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker with valid administrator credentials to execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability.