WP DSGVO Tools (GDPR) <= 3.1.23 had an AJAX action, ‘admin-dismiss-unsubscribe‘, which lacked a capability check and a nonce check and was available to unauthenticated users, and did not check the post type when deleting unsubscription requests. As such, it was possible for an attacker to permanently delete an arbitrary post or page on the site by sending an AJAX request with the “action” parameter set to “admin-dismiss-unsubscribe” and the “id” parameter set to the post to be deleted. Sending such a request would move the post to the trash, and repeating the request would permanently delete the post in question.
Adobe Commerce versions 2.4.7-p2, 2.4.6-p7, 2.4.5-p9, 2.4.4-p10 and earlier are affected by an Improper Access Control vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and have a low impact on integrity. Exploitation of this issue does not require user interaction.
Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 allows anyone to act as a moderator to a slide show via crafted HTTP POST requests to conference.cgi. A remote, unauthenticated attacker can use this vulnerability to start, stop, and disconnect active slideshows.
An improper access control vulnerability [CWE-284] in FortiOS version 7.2.0, version 7.0.13 and below, version 6.4.14 and below and FortiProxy version 7.2.3 and below, version 7.0.9 and below, version 2.0.12 and below may allow a remote unauthenticated attacker to bypass the firewall deny geolocalisation policy via timing the bypass with a GeoIP database update.
blockreassurance adds an information block aimed at offering helpful information to reassure customers that their store is trustworthy. An ajax function in module blockreassurance allows modifying any value in the configuration table. This vulnerability has been patched in version 5.1.4.
An Incorrect Access Control vulnerability was found in /smsa/add_subject.php and /smsa/add_subject_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to add a new subject entry.
A vulnerability in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. This vulnerability is due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit this vulnerability by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should trigger and drop for the ENIP packet.
Mattermost versions 9.5.x <= 9.5.5 and 9.8.0, when using shared channels with multiple remote servers connected, fail to check that the remote server A requesting the server B to update the profile picture of a user is the remote that actually has the user as a local one . This allows a malicious remote A to change the profile images of users that belong to another remote server C that is connected to the server A.
Improper access control vulnerability in Smart Touch Call prior to version 1.0.0.5 allows arbitrary webpage loading in webview.
Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause arbitrary webpage loading in webview.
Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause local file inclusion in webview.
A vulnerability, which was classified as critical, was found in Surya2Developer Hostel Management System 1.0. Affected is an unknown function of the file /admin/manage-students.php. The manipulation of the argument del leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-256890 is the identifier assigned to this vulnerability.
The Thrive Optimize WordPress plugin before 1.4.13.3, Thrive Comments WordPress plugin before 1.4.15.3, Thrive Headline Optimizer WordPress plugin before 1.3.7.3, Thrive Leads WordPress plugin before 2.3.9.4, Thrive Ultimatum WordPress plugin before 2.3.9.4, Thrive Quiz Builder WordPress plugin before 2.3.9.4, Thrive Apprentice WordPress plugin before 2.3.9.4, Thrive Visual Editor WordPress plugin before 2.6.7.4, Thrive Dashboard WordPress plugin before 2.3.9.3, Thrive Ovation WordPress plugin before 2.4.5, Thrive Clever Widgets WordPress plugin before 1.57.1 and Rise by Thrive Themes WordPress theme before 2.0.0, Ignition by Thrive Themes WordPress theme before 2.0.0, Luxe by Thrive Themes WordPress theme before 2.0.0, FocusBlog by Thrive Themes WordPress theme before 2.0.0, Minus by Thrive Themes WordPress theme before 2.0.0, Squared by Thrive Themes WordPress theme before 2.0.0, Voice WordPress theme before 2.0.0, Performag by Thrive Themes WordPress theme before 2.0.0, Pressive by Thrive Themes WordPress theme before 2.0.0, Storied by Thrive Themes WordPress theme before 2.0.0, Thrive Themes Builder WordPress theme before 2.2.4 register a REST API endpoint associated with Zapier functionality. While this endpoint was intended to require an API key in order to access, it was possible to access it by supplying an empty api_key parameter in vulnerable versions if Zapier was not enabled. Attackers could use this endpoint to add arbitrary data to a predefined option in the wp_options table.
Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.3, the rules inspecting HTTP2 headers can get bypassed by crafted traffic. The vulnerability has been patched in 7.0.3.
A denial of service vulnerability exists in the SeaMax remote configuration functionality of Sealevel Systems, Inc. SeaConnect 370W v1.3.34. Specially-crafted network packets can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.
An attacker could prematurely expire a verification code, making it unusable by the patient, making the patient unable to upload their TEKs to generate exposure notifications. We recommend upgrading the Exposure Notification server to V1.1.2 or greater.
A vulnerability has been found in keerti1924 PHP-MYSQL-User-Login-System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /edit.php. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-254389 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. It has been declared as critical. This vulnerability affects unknown code of the file /goform/form2NetSniper.cgi. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as critical was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. This vulnerability affects unknown code of the file /goform/DDNS of the component DDNS Service. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability, which was classified as critical, was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. Affected is an unknown function of the file /goform/form2AdvanceSetup.cgi of the component WiFi Settings Handler. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/form2IPQoSTcAdd of the component IP QoS Handler. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. It has been classified as critical. This affects an unknown part of the file /goform/form2LocalAclEditcfg.cgi of the component ACL Handler. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability has been found in openBI up to 1.0.8 and classified as critical. This vulnerability affects the function dlfile of the file /application/index/controller/Screen.php. The manipulation of the argument fileUrl leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-252472.
Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface.
The Tutor LMS plugin for WordPress is vulnerable to bypass to user registration in versions up to, and including, 2.7.6. This is due to a missing check for the 'users_can_register' option in the 'register_instructor' function. This makes it possible for unauthenticated attackers to register as the default role on the site, even if registration is disabled.
Permission control vulnerability in the audio module. Successful exploitation of this vulnerability may cause an app to be activated automatically.
An incorrect permission assignment vulnerability allows an attacker to modify product configuration files.
A vulnerability was found in Thecosy IceCMS 2.0.1. It has been rated as critical. Affected by this issue is some unknown functionality of the file /adplanet/PlanetCommentList of the component API. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-247886 is the identifier assigned to this vulnerability.
A vulnerability in access control list (ACL) functionality of the Gigabit Ethernet Management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XE Software 16.1.1 Release, which prevents the ACL from working when applied against the management interface. An attacker could exploit this issue by attempting to access the device via the management interface.
A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) IPv4 access control list (ACL) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. This vulnerability exists because Cisco IOS Software and Cisco IOS XE Software do not support extended IPv4 ACLs for SNMP, but they do allow administrators to configure extended named IPv4 ACLs that are attached to the SNMP server configuration without a warning message. This can result in no ACL being applied to the SNMP listening process. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP operations that should be denied. The attacker has no control of the SNMP ACL configuration and would still need a valid SNMP version 2c (SNMPv2c) community string or SNMP version 3 (SNMPv3) user credentials. SNMP with IPv6 ACL configurations is not affected. For more information, see the section of this advisory.
A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.
PowerJob V4.3.1 is vulnerable to Incorrect Access Control via the create app interface.
On EX4300-MP Series devices with any lo0 filters applied, transit network traffic may reach the control plane via loopback interface (lo0). The device may fail to forward such traffic. This issue affects Juniper Networks Junos OS 18.2 versions prior to 18.2R1-S2, 18.2R2 on EX4300-MP Series. This issue does not affect any other EX series devices.
Insufficient web service capability checks made it possible to move categories a user had permission to manage, to a parent category they did not have the capability to manage.
Siemens Automation License Manager (ALM) before 5.3 SP3 allows remote attackers to write to files, rename files, create directories, or delete directories via crafted packets.
A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.
Discourse is an open source discussion platform. The embeddable comments can be exploited to create new topics as any user but without any clear title or content. This issue is patched in the latest stable, beta and tests-passed versions of Discourse. As a workaround, disable embeddable comments by deleting all embeddable hosts.
Cybozu Dezie 8.0.0 to 8.1.1 allows remote attackers to bypass access restrictions to delete an arbitrary DBM (Cybozu Dezie proprietary format) file via unspecified vectors.
Adobe Connect versions 11.4.5 (and earlier), 12.1.5 (and earlier) are affected by an Improper Access Control vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to impact the integrity of a minor feature. Exploitation of this issue does not require user interaction.
GitLab CE/EE, versions 8.6 up to 11.x before 11.3.11, 11.4 before 11.4.8, and 11.5 before 11.5.1, are vulnerable to an access control issue that allows a Guest user to make changes to or delete their own comments on an issue, after the issue was made Confidential.
An Incorrect Access Control vulnerability was found in /smsa/add_class.php and /smsa/add_class_submit.php in Kashipara Responsive School Management System v3.2.0, which allows remote unauthenticated attackers to add a new class entry.
A vulnerability in the IP geolocation rules of Snort 3 could allow an unauthenticated, remote attacker to potentially bypass IP address restrictions. This vulnerability exists because the configuration for IP geolocation rules is not parsed properly. An attacker could exploit this vulnerability by spoofing an IP address until they bypass the restriction. A successful exploit could allow the attacker to bypass location-based IP address restrictions.
NAVER Whale browser mobile app before 1.10.6.2 allows the attacker to bypass its browser unlock function via incognito mode.
A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied.
An issue was discovered in Siren Investigate before 12.1.7. There is an ACL bypass on global objects.
An issue in Mojoportal v2.7.0.0 allows an unauthenticated attacker to register a new user even if the Allow User Registrations feature is disabled.
Lobe Chat is a chatbot framework that supports speech synthesis, multimodal, and extensible Function Call plugin system. When the application is password-protected (deployed with the `ACCESS_CODE` option), it is possible to access plugins without proper authorization (without password). This vulnerability is patched in 0.122.4.
Bypass vulnerability in Quiz And Survey Master plugin <= 7.3.10 on WordPress.
The Docker image of ownCloud Server through 10.11 contains a misconfiguration that renders the trusted_domains config useless. This could be abused to spoof the URL in password-reset e-mail messages.