In the Linux kernel, the following vulnerability has been resolved: jfs: upper bound check of tree index in dbAllocAG When computing the tree index in dbAllocAG, we never check if we are out of bounds realative to the size of the stree. This could happen in a scenario where the filesystem metadata are corrupted.

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix untrusted unsigned subtract Fix the following Smatch static checker warning: net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket() warn: untrusted unsigned subtract. 'ticket_len - 10 * 4' by prechecking the length of what we're trying to extract in two places in the token and decoding for a response packet. Also use sizeof() on the struct we're extracting rather specifying the size numerically to be consistent with the other related statements.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: vhci: Prevent use-after-free by removing debugfs files early Move the creation of debugfs files into a dedicated function, and ensure they are explicitly removed during vhci_release(), before associated data structures are freed. Previously, debugfs files such as "force_suspend", "force_wakeup", and others were created under hdev->debugfs but not removed in vhci_release(). Since vhci_release() frees the backing vhci_data structure, any access to these files after release would result in use-after-free errors. Although hdev->debugfs is later freed in hci_release_dev(), user can access files after vhci_data is freed but before hdev->debugfs is released.

In the Linux kernel, the following vulnerability has been resolved: xfrm: Duplicate SPI Handling The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI Netlink message, which triggers the kernel function xfrm_alloc_spi(). This function is expected to ensure uniqueness of the Security Parameter Index (SPI) for inbound Security Associations (SAs). However, it can return success even when the requested SPI is already in use, leading to duplicate SPIs assigned to multiple inbound SAs, differentiated only by their destination addresses. This behavior causes inconsistencies during SPI lookups for inbound packets. Since the lookup may return an arbitrary SA among those with the same SPI, packet processing can fail, resulting in packet drops. According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA is uniquely identified by the SPI and optionally protocol. Reproducing the Issue Reliably: To consistently reproduce the problem, restrict the available SPI range in charon.conf : spi_min = 0x10000000 spi_max = 0x10000002 This limits the system to only 2 usable SPI values. Next, create more than 2 Child SA. each using unique pair of src/dst address. As soon as the 3rd Child SA is initiated, it will be assigned a duplicate SPI, since the SPI pool is already exhausted. With a narrow SPI range, the issue is consistently reproducible. With a broader/default range, it becomes rare and unpredictable. Current implementation: xfrm_spi_hash() lookup function computes hash using daddr, proto, and family. So if two SAs have the same SPI but different destination addresses, then they will: a. Hash into different buckets b. Be stored in different linked lists (byspi + h) c. Not be seen in the same hlist_for_each_entry_rcu() iteration. As a result, the lookup will result in NULL and kernel allows that Duplicate SPI Proposed Change: xfrm_state_lookup_spi_proto() does a truly global search - across all states, regardless of hash bucket and matches SPI and proto.

In the Linux kernel, the following vulnerability has been resolved: tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect(). syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk in the TCP_ESTABLISHED state. [0] syzbot reused the server-side TCP Fast Open socket as a new client before the TFO socket completes 3WHS: 1. accept() 2. connect(AF_UNSPEC) 3. connect() to another destination As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes it to TCP_CLOSE and makes connect() possible, which restarts timers. Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the retransmit timer triggered the warning and the intended packet was not retransmitted. Let's call reqsk_fastopen_remove() in tcp_disconnect(). [0]: WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Modules linked in: CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7)) Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293 RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017 RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400 RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8 R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540 R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0 FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0 Call Trace: <IRQ> tcp_write_timer (net/ipv4/tcp_timer.c:738) call_timer_fn (kernel/time/timer.c:1747) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372) timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135) tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035) __walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1)) tmigr_handle_remote (kernel/time/timer_migration.c:1096) handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580) irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35)) </IRQ>

In the Linux kernel, the following vulnerability has been resolved: ASoC: codec: sma1307: Fix memory corruption in sma1307_setting_loaded() The sma1307->set.header_size is how many integers are in the header (there are 8 of them) but instead of allocating space of 8 integers we allocate 8 bytes. This leads to memory corruption when we copy data it on the next line: memcpy(sma1307->set.header, data, sma1307->set.header_size * sizeof(int)); Also since we're immediately copying over the memory in ->set.header, there is no need to zero it in the allocator. Use devm_kmalloc_array() to allocate the memory instead.

qfq_change_class in net/sched/sch_qfq.c in the Linux kernel before 6.2.13 allows an out-of-bounds write because lmax can exceed QFQ_MIN_LMAX.

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: ignore ops-locked netdevs Syzkaller managed to trigger lock dependency in xsk_notify via register_netdevice. As discussed in [0], using register_netdevice in the notifiers is problematic so skip adding lapbeth for ops-locked devices. xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] unregister_netdevice_many_notify+0xf9d/0x2700 net/core/dev.c:12077 unregister_netdevice_many net/core/dev.c:12140 [inline] unregister_netdevice_queue+0x305/0x3f0 net/core/dev.c:11984 register_netdevice+0x18f1/0x2270 net/core/dev.c:11149 lapbeth_new_device drivers/net/wan/lapbether.c:420 [inline] lapbeth_device_event+0x5b1/0xbe0 drivers/net/wan/lapbether.c:462 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] __dev_notify_flags+0x12c/0x2e0 net/core/dev.c:9497 netif_change_flags+0x108/0x160 net/core/dev.c:9526 dev_change_flags+0xba/0x250 net/core/dev_api.c:68 devinet_ioctl+0x11d5/0x1f50 net/ipv4/devinet.c:1200 inet_ioctl+0x3a7/0x3f0 net/ipv4/af_inet.c:1001 0: https://lore.kernel.org/netdev/20250625140357.6203d0af@kernel.org/

In the Linux kernel, the following vulnerability has been resolved: efi: stmm: Fix incorrect buffer allocation method The communication buffer allocated by setup_mm_hdr() is later on passed to tee_shm_register_kernel_buf(). The latter expects those buffers to be contiguous pages, but setup_mm_hdr() just uses kmalloc(). That can cause various corruptions or BUGs, specifically since commit 9aec2fb0fd5e ("slab: allocate frozen pages"), though it was broken before as well. Fix this by using alloc_pages_exact() instead of kmalloc().

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: fix use-after-free bugs causing by ptp_ocp_watchdog The ptp_ocp_detach() only shuts down the watchdog timer if it is pending. However, if the timer handler is already running, the timer_delete_sync() is not called. This leads to race conditions where the devlink that contains the ptp_ocp is deallocated while the timer handler is still accessing it, resulting in use-after-free bugs. The following details one of the race scenarios. (thread 1) | (thread 2) ptp_ocp_remove() | ptp_ocp_detach() | ptp_ocp_watchdog() if (timer_pending(&bp->watchdog))| bp = timer_container_of() timer_delete_sync() | | devlink_free(devlink) //free | | bp-> //use Resolve this by unconditionally calling timer_delete_sync() to ensure the timer is reliably deactivated, preventing any access after free.

In the Linux kernel, the following vulnerability has been resolved: nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm() Lei Lu recently reported that nfsd4_setclientid_confirm() did not check the return value from get_client_locked(). a SETCLIENTID_CONFIRM could race with a confirmed client expiring and fail to get a reference. That could later lead to a UAF. Fix this by getting a reference early in the case where there is an extant confirmed client. If that fails then treat it as if there were no confirmed client found at all. In the case where the unconfirmed client is expiring, just fail and return the result from get_client_locked().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix double free in idxd_setup_wqs() The clean up in idxd_setup_wqs() has had a couple bugs because the error handling is a bit subtle. It's simpler to just re-write it in a cleaner way. The issues here are: 1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when "conf_dev" hasn't been initialized. 2) If kzalloc_node() fails then again "conf_dev" is invalid. It's either uninitialized or it points to the "conf_dev" from the previous iteration so it leads to a double free. It's better to free partial loop iterations within the loop and then the unwinding at the end can handle whole loop iterations. I also renamed the labels to describe what the goto does and not where the goto was located.

In the Linux kernel, the following vulnerability has been resolved: um: virtio_uml: Fix use-after-free after put_device in probe When register_virtio_device() fails in virtio_uml_probe(), the code sets vu_dev->registered = 1 even though the device was not successfully registered. This can lead to use-after-free or other issues.

In the Linux kernel, the following vulnerability has been resolved: io_uring/memmap: cast nr_pages to size_t before shifting If the allocated size exceeds UINT_MAX, then it's necessary to cast the mr->nr_pages value to size_t to prevent it from overflowing. In practice this isn't much of a concern as the required memory size will have been validated upfront, and accounted to the user. And > 4GB sizes will be necessary to make the lack of a cast a problem, which greatly exceeds normal user locked_vm settings that are generally in the kb to mb range. However, if root is used, then accounting isn't done, and then it's possible to hit this issue.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Detect events pointing to unexpected TREs When a remote device sends a completion event to the host, it contains a pointer to the consumed TRE. The host uses this pointer to process all of the TREs between it and the host's local copy of the ring's read pointer. This works when processing completion for chained transactions, but can lead to nasty results if the device sends an event for a single-element transaction with a read pointer that is multiple elements ahead of the host's read pointer. For instance, if the host accesses an event ring while the device is updating it, the pointer inside of the event might still point to an old TRE. If the host uses the channel's xfer_cb() to directly free the buffer pointed to by the TRE, the buffer will be double-freed. This behavior was observed on an ep that used upstream EP stack without 'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer is written")'. Where the device updated the events ring pointer before updating the event contents, so it left a window where the host was able to access the stale data the event pointed to, before the device had the chance to update them. The usual pattern was that the host received an event pointing to a TRE that is not immediately after the last processed one, so it got treated as if it was a chained transaction, processing all of the TREs in between the two read pointers. This commit aims to harden the host by ensuring transactions where the event points to a TRE that isn't local_rp + 1 are chained. [mani: added stable tag and reworded commit message]

In the Linux kernel, the following vulnerability has been resolved: gpiolib: acpi: initialize acpi_gpio_info struct Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to __acpi_find_gpio() and later in the call stack info->quirks is used in acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver: [ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ [ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22 Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio()

In the Linux kernel, the following vulnerability has been resolved: fuse: Block access to folio overlimit syz reported a slab-out-of-bounds Write in fuse_dev_do_write. When the number of bytes to be retrieved is truncated to the upper limit by fc->max_pages and there is an offset, the oob is triggered. Add a loop termination condition to prevent overruns.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quicki2c: Fix ACPI dsd ICRS/ISUB length The QuickI2C ACPI _DSD methods return ICRS and ISUB data with a trailing byte, making the actual length is one more byte than the structs defined. It caused stack-out-of-bounds and kernel crash: kernel: BUG: KASAN: stack-out-of-bounds in quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: Write of size 12 at addr ffff888106d1f900 by task kworker/u33:2/75 kernel: kernel: CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Not tainted 6.16.0+ #3 PREEMPT(voluntary) kernel: Workqueue: async async_run_entry_fn kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x76/0xa0 kernel: print_report+0xd1/0x660 kernel: ? __pfx__raw_spin_lock_irqsave+0x10/0x10 kernel: ? __kasan_slab_free+0x5d/0x80 kernel: ? kasan_addr_to_slab+0xd/0xb0 kernel: kasan_report+0xe1/0x120 kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: kasan_check_range+0x11c/0x200 kernel: __asan_memcpy+0x3b/0x80 kernel: quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? __pfx_quicki2c_acpi_get_dsd_property.constprop.0+0x10/0x10 [intel_quicki2c] kernel: quicki2c_get_acpi_resources+0x237/0x730 [intel_quicki2c] [...] kernel: </TASK> kernel: kernel: The buggy address belongs to stack of task kworker/u33:2/75 kernel: and is located at offset 48 in frame: kernel: quicki2c_get_acpi_resources+0x0/0x730 [intel_quicki2c] kernel: kernel: This frame has 3 objects: kernel: [32, 36) 'hid_desc_addr' kernel: [48, 59) 'i2c_param' kernel: [80, 224) 'i2c_config' ACPI DSD methods return: \_SB.PC00.THC0.ICRS Buffer 000000003fdc947b 001 Len 0C = 0A 00 80 1A 06 00 00 00 00 00 00 00 \_SB.PC00.THC0.ISUB Buffer 00000000f2fcbdc4 001 Len 91 = 00 00 00 00 00 00 00 00 00 00 00 00 Adding reserved padding to quicki2c_subip_acpi_parameter/config.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Make dma-fences compliant with the safe access rules Xe can free some of the data pointed to by the dma-fences it exports. Most notably the timeline name can get freed if userspace closes the associated submit queue. At the same time the fence could have been exported to a third party (for example a sync_fence fd) which will then cause an use- after-free on subsequent access. To make this safe we need to make the driver compliant with the newly documented dma-fence rules. Driver has to ensure a RCU grace period between signalling a fence and freeing any data pointed to by said fence. For the timeline name we simply make the queue be freed via kfree_rcu and for the shared lock associated with multiple queues we add a RCU grace period before freeing the per GT structure holding the lock.

In the Linux kernel, the following vulnerability has been resolved: iio: light: Add check for array bounds in veml6075_read_int_time_ms The array contains only 5 elements, but the index calculated by veml6075_read_int_time_index can range from 0 to 7, which could lead to out-of-bounds access. The check prevents this issue. Coverity Issue CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN) overrun-local: Overrunning array veml6075_it_ms of 5 4-byte elements at element index 7 (byte offset 31) using index int_index (which evaluates to 7) This is hardening against potentially broken hardware. Good to have but not necessary to backport.

In the Linux kernel, the following vulnerability has been resolved: media: ivsc: Fix crash at shutdown due to missing mei_cldev_disable() calls Both the ACE and CSI driver are missing a mei_cldev_disable() call in their remove() function. This causes the mei_cl client to stay part of the mei_device->file_list list even though its memory is freed by mei_cl_bus_dev_release() calling kfree(cldev->cl). This leads to a use-after-free when mei_vsc_remove() runs mei_stop() which first removes all mei bus devices calling mei_ace_remove() and mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing the just freed cldev->cl. And mei_vsc_remove() it self is run at shutdown because of the platform_device_unregister(tp->pdev) in vsc_tp_shutdown() When building a kernel with KASAN this leads to the following KASAN report: [ 106.634504] ================================================================== [ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1 [ 106.634729] [ 106.634767] Tainted: [E]=UNSIGNED_MODULE [ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025 [ 106.634773] Call Trace: [ 106.634777] <TASK> ... [ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) [ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei [ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei ... [ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei [ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc [ 106.635066] platform_remove (drivers/base/platform.c:1424) Add the missing mei_cldev_disable() calls so that the mei_cl gets removed from mei_device->file_list before it is freed to fix this.

In the Linux kernel, the following vulnerability has been resolved: fbdev: fix potential buffer overflow in do_register_framebuffer() The current implementation may lead to buffer overflow when: 1. Unregistration creates NULL gaps in registered_fb[] 2. All array slots become occupied despite num_registered_fb < FB_MAX 3. The registration loop exceeds array bounds Add boundary check to prevent registered_fb[FB_MAX] access.

In the Linux kernel, the following vulnerability has been resolved: i2c: core: Fix double-free of fwnode in i2c_unregister_device() Before commit df6d7277e552 ("i2c: core: Do not dereference fwnode in struct device"), i2c_unregister_device() only called fwnode_handle_put() on of_node-s in the form of calling of_node_put(client->dev.of_node). But after this commit the i2c_client's fwnode now unconditionally gets fwnode_handle_put() on it. When the i2c_client has no primary (ACPI / OF) fwnode but it does have a software fwnode, the software-node will be the primary node and fwnode_handle_put() will put() it. But for the software fwnode device_remove_software_node() will also put() it leading to a double free: [ 82.665598] ------------[ cut here ]------------ [ 82.665609] refcount_t: underflow; use-after-free. [ 82.665808] WARNING: CPU: 3 PID: 1502 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x11 ... [ 82.666830] RIP: 0010:refcount_warn_saturate+0xba/0x110 ... [ 82.666962] <TASK> [ 82.666971] i2c_unregister_device+0x60/0x90 Fix this by not calling fwnode_handle_put() when the primary fwnode is a software-node.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Also allocate and copy hash for reading of filter files Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds the pointer to the global tracer hash to its iterator. Unlike the writer that allocates a copy of the hash, the reader keeps the pointer to the filter hashes. This is problematic because this pointer is static across function calls that release the locks that can update the global tracer hashes. This can cause UAF and similar bugs. Allocate and copy the hash for reading the filter files like it is done for the writers. This not only fixes UAF bugs, but also makes the code a bit simpler as it doesn't have to differentiate when to free the iterator's hash between writers and readers.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Prevent recovery work from being queued during device removal Use disable_work_sync() instead of cancel_work_sync() in ivpu_dev_fini() to ensure that no new recovery work items can be queued after device removal has started. Previously, recovery work could be scheduled even after canceling existing work, potentially leading to use-after-free bugs if recovery accessed freed resources. Rename ivpu_pm_cancel_recovery() to ivpu_pm_disable_recovery() to better reflect its new behavior.

Authentication Bypass vulnerability in Hitachi Ops Center Common Services.This issue affects Hitachi Ops Center Common Services: from 10.9.3-00 before 11.0.2-01.

In the Linux kernel, the following vulnerability has been resolved: drbd: add missing kref_get in handle_write_conflicts With `two-primaries` enabled, DRBD tries to detect "concurrent" writes and handle write conflicts, so that even if you write to the same sector simultaneously on both nodes, they end up with the identical data once the writes are completed. In handling "superseeded" writes, we forgot a kref_get, resulting in a premature drbd_destroy_device and use after free, and further to kernel crashes with symptoms. Relevance: No one should use DRBD as a random data generator, and apparently all users of "two-primaries" handle concurrent writes correctly on layer up. That is cluster file systems use some distributed lock manager, and live migration in virtualization environments stops writes on one node before starting writes on the other node. Which means that other than for "test cases", this code path is never taken in real life. FYI, in DRBD 9, things are handled differently nowadays. We still detect "write conflicts", but no longer try to be smart about them. We decided to disconnect hard instead: upper layers must not submit concurrent writes. If they do, that's their fault.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl() The UIC completion interrupt may be disabled while an UIC command is being processed. When the UIC completion interrupt is reenabled, an UIC interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit. Hence this patch that removes this kernel warning.

In the Linux kernel, the following vulnerability has been resolved: proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario. It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same manner.

In the Linux kernel, the following vulnerability has been resolved: libceph: fix invalid accesses to ceph_connection_v1_info There is a place where generic code in messenger.c is reading and another place where it is writing to con->v1 union member without checking that the union member is active (i.e. msgr1 is in use). On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter, so such a read is almost guaranteed to return a bogus value instead of 0 when msgr2 is in use. This ends up being fairly benign because the side effect is just the invalidation of the authorizer and successive fetching of new tickets. con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that it's being written to can cause more serious consequences, but luckily it's not something that happens often.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 power domain descriptors, too UAC3 power domain descriptors need to be verified with its variable bLength for avoiding the unexpected OOB accesses by malicious firmware, too.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix use-after-free in cmp_bss() Following bss_free() quirk introduced in commit 776b3580178f ("cfg80211: track hidden SSID networks properly"), adjust cfg80211_update_known_bss() to free the last beacon frame elements only if they're not shared via the corresponding 'hidden_beacon_bss' pointer.

In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix potential buffer overflow in setup_clusters() In setup_swap_map(), we only ensure badpages are in range (0, last_page]. As maxpages might be < last_page, setup_clusters() will encounter a buffer overflow when a badpage is >= maxpages. Only call inc_cluster_info_page() for badpage which is < maxpages to fix the issue.

In the Linux kernel, the following vulnerability has been resolved: xfs: do not propagate ENODATA disk errors into xattr code ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code; namely, that the requested attribute name could not be found. However, a medium error from disk may also return ENODATA. At best, this medium error may escape to userspace as "attribute not found" when in fact it's an IO (disk) error. At worst, we may oops in xfs_attr_leaf_get() when we do: error = xfs_attr_leaf_hasname(args, &bp); if (error == -ENOATTR) { xfs_trans_brelse(args->trans, bp); return error; } because an ENODATA/ENOATTR error from disk leaves us with a null bp, and the xfs_trans_brelse will then null-deref it. As discussed on the list, we really need to modify the lower level IO functions to trap all disk errors and ensure that we don't let unique errors like this leak up into higher xfs functions - many like this should be remapped to EIO. However, this patch directly addresses a reported bug in the xattr code, and should be safe to backport to stable kernels. A larger-scope patch to handle more unique errors at lower levels can follow later. (Note, prior to 07120f1abdff we did not oops, but we did return the wrong error code to userspace.)

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Avoid stack buffer overflow from kernel cmdline While the kernel command line is considered trusted in most environments, avoid writing 1 byte past the end of "acpiid" if the "str" argument is maximum length.

In the Linux kernel, the following vulnerability has been resolved: fs: writeback: fix use-after-free in __mark_inode_dirty() An use-after-free issue occurred when __mark_inode_dirty() get the bdi_writeback that was in the progress of switching. CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1 ...... pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mark_inode_dirty+0x124/0x418 lr : __mark_inode_dirty+0x118/0x418 sp : ffffffc08c9dbbc0 ........ Call trace: __mark_inode_dirty+0x124/0x418 generic_update_time+0x4c/0x60 file_modified+0xcc/0xd0 ext4_buffered_write_iter+0x58/0x124 ext4_file_write_iter+0x54/0x704 vfs_write+0x1c0/0x308 ksys_write+0x74/0x10c __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x40/0xe4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x194/0x198 Root cause is: systemd-random-seed kworker ---------------------------------------------------------------------- ___mark_inode_dirty inode_switch_wbs_work_fn spin_lock(&inode->i_lock); inode_attach_wb locked_inode_to_wb_and_lock_list get inode->i_wb spin_unlock(&inode->i_lock); spin_lock(&wb->list_lock) spin_lock(&inode->i_lock) inode_io_list_move_locked spin_unlock(&wb->list_lock) spin_unlock(&inode->i_lock) spin_lock(&old_wb->list_lock) inode_do_switch_wbs spin_lock(&inode->i_lock) inode->i_wb = new_wb spin_unlock(&inode->i_lock) spin_unlock(&old_wb->list_lock) wb_put_many(old_wb, nr_switched) cgwb_release old wb released wb_wakeup_delayed() accesses wb, then trigger the use-after-free issue Fix this race condition by holding inode spinlock until wb_wakeup_delayed() finished.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix buffer free/clear order in deferred receive path Fix a use-after-free window by correcting the buffer release sequence in the deferred receive path. The code freed the RQ buffer first and only then cleared the context pointer under the lock. Concurrent paths (e.g., ABTS and the repost path) also inspect and release the same pointer under the lock, so the old order could lead to double-free/UAF. Note that the repost path already uses the correct pattern: detach the pointer under the lock, then free it after dropping the lock. The deferred path should do the same.

The do_change_type function in fs/namespace.c in the Linux kernel before 2.6.22 does not verify that the caller has the CAP_SYS_ADMIN capability, which allows local users to gain privileges or cause a denial of service by modifying the properties of a mountpoint.

In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: Fix the driver update version check The security-version-number check should be used rather than the runtime version check for driver updates. Otherwise, the firmware update would fail when the update binary had a lower runtime version number than the current one. [ rjw: Changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: iio: fix potential out-of-bound write The buffer is set to 20 characters. If a caller write more characters, count is truncated to the max available space in "simple_write_to_buffer". To protect from OoB access, check that the input size fit into buffer and add a zero terminator after copy to the end of the copied data.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: prevent potential UAF If we hit the error path, the previous fence (if there is one) has already been put() prior to this, so doing a fence_wait could lead to UAF. Tweak the flow to do to the put() until after we do the wait. (cherry picked from commit 9b7ca35ed28fe5fad86e9d9c24ebd1271e4c9c3e)

The aufs module for the Linux kernel 3.x and 4.x does not properly restrict the mount namespace, which allows local users to gain privileges by mounting an aufs filesystem on top of a FUSE filesystem, and then executing a crafted setuid program.

In the Linux kernel, the following vulnerability has been resolved: can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB can_put_echo_skb() takes ownership of the SKB and it may be freed during or after the call. However, xilinx_can xcan_write_frame() keeps using SKB after the call. Fix that by only calling can_put_echo_skb() after the code is done touching the SKB. The tx_lock is held for the entire xcan_write_frame() execution and also on the can_get_echo_skb() side so the order of operations does not matter. An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skb memory") did not move the can_put_echo_skb() call far enough. [mkl: add "commit" in front of sha1 in patch description] [mkl: fix indention]

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add sanity check for file name The length of the file name should be smaller than the directory entry size.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE On Google gs101, the number of UTP transfer request slots (nutrs) is 32, and in this case the driver ends up programming the UTRL_NEXUS_TYPE incorrectly as 0. This is because the left hand side of the shift is 1, which is of type int, i.e. 31 bits wide. Shifting by more than that width results in undefined behaviour. Fix this by switching to the BIT() macro, which applies correct type casting as required. This ensures the correct value is written to UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift warning: UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21 shift exponent 32 is too large for 32-bit type 'int' For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE write.

In the Linux kernel, the following vulnerability has been resolved: open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE As described in commit 7a54947e727b ('Merge patch series "fs: allow changing idmappings"'), open_tree_attr(2) was necessary in order to allow for a detached mount to be created and have its idmappings changed without the risk of any racing threads operating on it. For this reason, mount_setattr(2) still does not allow for id-mappings to be changed. However, there was a bug in commit 2462651ffa76 ("fs: allow changing idmappings") which allowed users to bypass this restriction by calling open_tree_attr(2) *without* OPEN_TREE_CLONE. can_idmap_mount() prevented this bug from allowing an attached mountpoint's id-mapping from being modified (thanks to an is_anon_ns() check), but this still allows for detached (but visible) mounts to have their be id-mapping changed. This risks the same UAF and locking issues as described in the merge commit, and was likely unintentional.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix UAF on sva unbind with pending IOPFs Commit 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path") disables IOPF on device by removing the device from its IOMMU's IOPF queue when the last IOPF-capable domain is detached from the device. Unfortunately, it did this in a wrong place where there are still pending IOPFs. As a result, a use-after-free error is potentially triggered and eventually a kernel panic with a kernel trace similar to the following: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 313 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0 Workqueue: iopf_queue/dmar0-iopfq iommu_sva_handle_iopf Call Trace: <TASK> iopf_free_group+0xe/0x20 process_one_work+0x197/0x3d0 worker_thread+0x23a/0x350 ? rescuer_thread+0x4a0/0x4a0 kthread+0xf8/0x230 ? finish_task_switch.isra.0+0x81/0x260 ? kthreads_online_cpu+0x110/0x110 ? kthreads_online_cpu+0x110/0x110 ret_from_fork+0x13b/0x170 ? kthreads_online_cpu+0x110/0x110 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- The intel_pasid_tear_down_entry() function is responsible for blocking hardware from generating new page faults and flushing all in-flight ones. Therefore, moving iopf_for_domain_remove() after this function should resolve this.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Remove improper idxd_free The call to idxd_free() introduces a duplicate put_device() leading to a reference count underflow: refcount_t: underflow; use-after-free. WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 ... Call Trace: <TASK> idxd_remove+0xe4/0x120 [idxd] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x197/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x74/0xf0 pci_unregister_driver+0x2e/0xb0 idxd_exit_module+0x34/0x7a0 [idxd] __do_sys_delete_module.constprop.0+0x183/0x280 do_syscall_64+0x54/0xd70 entry_SYSCALL_64_after_hwframe+0x76/0x7e The idxd_unregister_devices() which is invoked at the very beginning of idxd_remove(), already takes care of the necessary put_device() through the following call path: idxd_unregister_devices() -> device_unregister() -> put_device() In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is called immediately after, it can result in a use-after-free. Remove the improper idxd_free() to avoid both the refcount underflow and potential memory corruption during module unload.

In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access In the preparation stage of CPU online, if the corresponding the rdp's->nocb_cb_kthread does not exist, will be created, there is a situation where the rdp's rcuop kthreads creation fails, and then de-offload this CPU's rdp, does not assign this CPU's rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and rdp's->rdp_gp->nocb_gp_kthread is still valid. This will cause the subsequent re-offload operation of this offline CPU, which will pass the conditional check and the kthread_unpark() will access invalid rdp's->nocb_cb_kthread pointer. This commit therefore use rdp's->nocb_gp_kthread instead of rdp_gp's->nocb_gp_kthread for safety check.