In the Linux kernel, the following vulnerability has been resolved: i40e: Fix kernel crash during module removal The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set.

In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats() It is possible to do NULL pointer dereference in routine that updates Tx ring stats. Currently only stats and bytes are updated when ring pointer is valid, but later on ring is accessed to propagate gathered Tx stats onto VSI stats. Change the existing logic to move to next ring when ring is NULL.

In the Linux kernel, the following vulnerability has been resolved: media: lgdt3306a: Add a check against null-pointer-def The driver should check whether the client provides the platform_data. The following log reveals it: [ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40 [ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414 [ 29.612820] Call Trace: [ 29.613030] <TASK> [ 29.613201] dump_stack_lvl+0x56/0x6f [ 29.613496] ? kmemdup+0x30/0x40 [ 29.613754] print_report.cold+0x494/0x6b7 [ 29.614082] ? kmemdup+0x30/0x40 [ 29.614340] kasan_report+0x8a/0x190 [ 29.614628] ? kmemdup+0x30/0x40 [ 29.614888] kasan_check_range+0x14d/0x1d0 [ 29.615213] memcpy+0x20/0x60 [ 29.615454] kmemdup+0x30/0x40 [ 29.615700] lgdt3306a_probe+0x52/0x310 [ 29.616339] i2c_device_probe+0x951/0xa90

In the Linux kernel, the following vulnerability has been resolved: drm/sprd: fix potential NULL dereference 'drm' could be null in sprd_drm_shutdown, and drm_warn maybe dereference it, remove this warning log. v1 -> v2: - Split checking platform_get_resource() return value to a separate patch - Use dev_warn() instead of removing the warning log

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix null pointer dereference for resetting decoder Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix NULL pointer dereference in nilfs_palloc_commit_free_entry() Syzbot reported a null-ptr-deref bug: NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 3603 Comm: segctord Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0 fs/nilfs2/alloc.c:608 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0 Call Trace: <TASK> nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline] nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193 nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236 nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940 nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline] nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline] nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018 nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline] nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045 nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline] nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> ... If DAT metadata file is corrupted on disk, there is a case where req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during a b-tree operation that cascadingly updates ancestor nodes of the b-tree, because nilfs_dat_commit_alloc() for a lower level block can initialize the blocknr on the same DAT entry between nilfs_dat_prepare_end() and nilfs_dat_commit_end(). If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free() without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and causes the NULL pointer dereference above in nilfs_palloc_commit_free_entry() function, which leads to a crash. Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free(). This also calls nilfs_error() in that case to notify that there is a fatal flaw in the filesystem metadata and prevent further operations.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix a possible null pointer dereference In radeon_fp_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. The failure status of drm_cvt_mode() on the other path is checked too.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix NULL deref in bond_rr_gen_slave_id Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Don't unregister on shutdown Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path.

In the Linux kernel, the following vulnerability has been resolved: sfc: fix null pointer dereference in efx_hard_start_xmit Trying to get the channel from the tx_queue variable here is wrong because we can only be here if tx_queue is NULL, so we shouldn't dereference it. As the above comment in the code says, this is very unlikely to happen, but it's wrong anyway so let's fix it. I hit this issue because of a different bug that caused tx_queue to be NULL. If that happens, this is the error message that we get here: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [...] RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Addresses-Coverity-ID: 1493866 ("Null pointer dereference")

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer in skb_segment_list Commit 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") introduced UDP listifyed GRO. The segmentation relies on frag_list being untouched when passing through the network stack. This assumption can be broken sometimes, where frag_list itself gets pulled into linear area, leaving frag_list being NULL. When this happens it can trigger following NULL pointer dereference, and panic the kernel. Reverse the test condition should fix it. [19185.577801][ C1] BUG: kernel NULL pointer dereference, address: ... [19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390 ... [19185.834644][ C1] Call Trace: [19185.841730][ C1] <TASK> [19185.848563][ C1] __udp_gso_segment+0x33e/0x510 [19185.857370][ C1] inet_gso_segment+0x15b/0x3e0 [19185.866059][ C1] skb_mac_gso_segment+0x97/0x110 [19185.874939][ C1] __skb_gso_segment+0xb2/0x160 [19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0 [19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90 [19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200 [19185.910003][ C1] ip_local_deliver_finish+0x44/0x60 [19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0 [19185.927834][ C1] process_backlog+0x88/0x130 [19185.935840][ C1] __napi_poll+0x27/0x150 [19185.943447][ C1] net_rx_action+0x27e/0x5f0 [19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core] [19185.960848][ C1] __do_softirq+0xbc/0x25d [19185.968607][ C1] irq_exit_rcu+0x83/0xb0 [19185.976247][ C1] common_interrupt+0x43/0xa0 [19185.984235][ C1] asm_common_interrupt+0x22/0x40 ... [19186.094106][ C1] </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/msm: another fix for the headless Adreno GPU Fix another oops reproducible when rebooting the board with the Adreno GPU working in the headless mode (e.g. iMX platforms). Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=74936831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 51 Comm: reboot Not tainted 6.2.0-rc1-dirty #11 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at msm_atomic_commit_tail+0x50/0x970 LR is at commit_tail+0x9c/0x188 pc : [<c06aa430>] lr : [<c067a214>] psr: 600e0013 sp : e0851d30 ip : ee4eb7eb fp : 00090acc r10: 00000058 r9 : c2193014 r8 : c4310000 r7 : c4759380 r6 : 07bef61d r5 : 00000000 r4 : 00000000 r3 : c44cc440 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 74910019 DAC: 00000051 Register r0 information: NULL pointer Register r1 information: NULL pointer Register r2 information: NULL pointer Register r3 information: slab kmalloc-1k start c44cc400 pointer offset 64 size 1024 Register r4 information: NULL pointer Register r5 information: NULL pointer Register r6 information: non-paged memory Register r7 information: slab kmalloc-128 start c4759380 pointer offset 0 size 128 Register r8 information: slab kmalloc-2k start c4310000 pointer offset 0 size 2048 Register r9 information: non-slab/vmalloc memory Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process reboot (pid: 51, stack limit = 0xc80046d9) Stack: (0xe0851d30 to 0xe0852000) 1d20: c4759380 fbd77200 000005ff 002b9c70 1d40: c4759380 c4759380 00000000 07bef61d 00000600 c0d6fe7c c2193014 00000058 1d60: 00090acc c067a214 00000000 c4759380 c4310000 00000000 c44cc854 c067a89c 1d80: 00000000 00000000 00000000 c4310468 00000000 c4759380 c4310000 c4310468 1da0: c4310470 c0643258 c4759380 00000000 00000000 c0c4ee24 00000000 c44cc810 1dc0: 00000000 c0c4ee24 00000000 c44cc810 00000000 0347d2a8 e0851e00 e0851e00 1de0: c4759380 c067ad20 c4310000 00000000 c44cc810 c27f8718 c44cc854 c067adb8 1e00: c4933000 00000002 00000001 00000000 00000000 c2130850 00000000 c2130854 1e20: c25fc488 00000000 c0ff162c 00000000 00000001 00000002 00000000 00000000 1e40: c43102c0 c43102c0 00000000 0347d2a8 c44cc810 c44cc814 c2133da8 c06d1a60 1e60: 00000000 00000000 00079028 c2012f24 fee1dead c4933000 00000058 c01431e4 1e80: 01234567 c0143a20 00000000 00000000 00000000 00000000 00000000 00000000 1ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f80: 00000000 00000000 00000000 0347d2a8 00000002 00000004 00000078 00000058 1fa0: c010028c c0100060 00000002 00000004 fee1dead 28121969 01234567 00079028 1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc 1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6 600e0030 fee1dead 00000000 00000000 msm_atomic_commit_tail from commit_tail+0x9c/0x188 commit_tail from drm_atomic_helper_commit+0x160/0x188 drm_atomic_helper_commit from drm_atomic_commit+0xac/0xe0 drm_atomic_commit from drm_atomic_helper_disable_all+0x1b0/0x1c0 drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x88/0x140 drm_atomic_helper_shutdown from device_shutdown+0x16c/0x240 device_shutdown from kernel_restart+0x38/0x90 kernel_restart from __do_sys_reboot+0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: null_blk: Always check queue mode setting from configfs Make sure to check device queue mode in the null_validate_conf() and return error for NULL_Q_RQ as we don't allow legacy I/O path, without this patch we get OOPs when queue mode is set to 1 from configfs, following are repro steps :- modprobe null_blk nr_devices=0 mkdir config/nullb/nullb0 echo 1 > config/nullb/nullb0/memory_backed echo 4096 > config/nullb/nullb0/blocksize echo 20480 > config/nullb/nullb0/size echo 1 > config/nullb/nullb0/queue_mode echo 1 > config/nullb/nullb0/power Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null) due to oops @ 0xffffffffc041c329 CPU: 42 PID: 2372 Comm: sh Tainted: G O N 6.3.0-rc5lblk+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk] Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20 RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00 RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002 R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740 FS: 00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0 DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> nullb_device_power_store+0xd1/0x120 [null_blk] configfs_write_iter+0xb4/0x120 vfs_write+0x2ba/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fd4460c57a7 Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7 RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001 RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0 R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002 R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700 </TASK>

In the Linux kernel, the following vulnerability has been resolved: x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL Baoquan reported that after triggering a crash the subsequent crash-kernel fails to boot about half of the time. It triggers a NULL pointer dereference in the periodic tick code. This happens because the legacy timer interrupt (IRQ0) is resent in software which happens in soft interrupt (tasklet) context. In this context get_irq_regs() returns NULL which leads to the NULL pointer dereference. The reason for the resend is a spurious APIC interrupt on the IRQ0 vector which is captured and leads to a resend when the legacy timer interrupt is enabled. This is wrong because the legacy PIC interrupts are level triggered and therefore should never be resent in software, but nothing ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not know about their trigger type. Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Check the DVFS OPP count returned by the firmware Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: Ensure 'ib_sge list' is accessible Move the declaration of the 'ib_sge list' variable outside the 'always_invalidate' block to ensure it remains accessible for use throughout the function. Previously, 'ib_sge list' was declared within the 'always_invalidate' block, limiting its accessibility, then caused a 'BUG: kernel NULL pointer dereference'[1]. ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15a/0x2d0 ? search_module_extables+0x19/0x60 ? search_bpf_extables+0x5f/0x80 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? memcpy_orig+0xd5/0x140 rxe_mr_copy+0x1c3/0x200 [rdma_rxe] ? rxe_pool_get_index+0x4b/0x80 [rdma_rxe] copy_data+0xa5/0x230 [rdma_rxe] rxe_requester+0xd9b/0xf70 [rdma_rxe] ? finish_task_switch.isra.0+0x99/0x2e0 rxe_sender+0x13/0x40 [rdma_rxe] do_task+0x68/0x1e0 [rdma_rxe] process_one_work+0x177/0x330 worker_thread+0x252/0x390 ? __pfx_worker_thread+0x10/0x10 This change ensures the variable is available for subsequent operations that require it. [1] https://lore.kernel.org/linux-rdma/6a1f3e8f-deb0-49f9-bc69-a9b03ecfcda7@fujitsu.com/

In the Linux kernel, the following vulnerability has been resolved: net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable() The function of_phy_find_device may return NULL, so we need to take care before dereferencing phy_dev.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci_plat_remove: avoid NULL dereference Since commit 4736ebd7fcaff1eb8481c140ba494962847d6e0a ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") xhci->shared_hcd can be NULL, which causes the following Oops on reboot: [ 710.124450] systemd-shutdown[1]: Rebooting. [ 710.298861] xhci-hcd xhci-hcd.2.auto: remove, state 4 [ 710.304217] usb usb3: USB disconnect, device number 1 [ 710.317441] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered [ 710.323280] xhci-hcd xhci-hcd.2.auto: remove, state 1 [ 710.328401] usb usb2: USB disconnect, device number 1 [ 710.333515] usb 2-3: USB disconnect, device number 2 [ 710.467649] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered [ 710.475450] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003b8 [ 710.484425] Mem abort info: [ 710.487265] ESR = 0x0000000096000004 [ 710.491060] EC = 0x25: DABT (current EL), IL = 32 bits [ 710.496427] SET = 0, FnV = 0 [ 710.499525] EA = 0, S1PTW = 0 [ 710.502716] FSC = 0x04: level 0 translation fault [ 710.507648] Data abort info: [ 710.510577] ISV = 0, ISS = 0x00000004 [ 710.514462] CM = 0, WnR = 0 [ 710.517480] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b0050000 [ 710.523976] [00000000000003b8] pgd=0000000000000000, p4d=0000000000000000 [ 710.530961] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 710.536551] Modules linked in: rfkill input_leds snd_soc_simple_card snd_soc_simple_card_utils snd_soc_nau8822 designware_i2s snd_soc_core dw_hdmi_ahb_audio snd_pcm_dmaengine arm_ccn panfrost ac97_bus gpu_sched snd_pcm at24 fuse configfs sdhci_of_dwcmshc sdhci_pltfm sdhci nvme led_class mmc_core nvme_core bt1_pvt polynomial tp_serio snd_seq_midi snd_seq_midi_event snd_seq snd_timer snd_rawmidi snd_seq_device snd soundcore efivarfs ipv6 [ 710.575286] CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 5.19.0-rc7-00043-gfd8619f4fd54 #1 [ 710.583822] Hardware name: T-Platforms TF307-MB/BM1BM1-A, BIOS 5.6 07/06/2022 [ 710.590972] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 710.597949] pc : usb_remove_hcd+0x34/0x1e4 [ 710.602067] lr : xhci_plat_remove+0x74/0x140 [ 710.606351] sp : ffff800009f3b7c0 [ 710.609674] x29: ffff800009f3b7c0 x28: ffff000800960040 x27: 0000000000000000 [ 710.616833] x26: ffff800008dc22a0 x25: 0000000000000000 x24: 0000000000000000 [ 710.623992] x23: 0000000000000000 x22: ffff000805465810 x21: ffff000805465800 [ 710.631149] x20: ffff000800f80000 x19: 0000000000000000 x18: ffffffffffffffff [ 710.638307] x17: ffff000805096000 x16: ffff00080633b800 x15: ffff000806537a1c [ 710.645465] x14: 0000000000000001 x13: 0000000000000000 x12: ffff00080378d6f0 [ 710.652621] x11: ffff00080041a900 x10: ffff800009b204e8 x9 : ffff8000088abaa4 [ 710.659779] x8 : ffff000800960040 x7 : ffff800009409000 x6 : 0000000000000001 [ 710.666936] x5 : ffff800009241000 x4 : ffff800009241440 x3 : 0000000000000000 [ 710.674094] x2 : ffff000800960040 x1 : ffff000800960040 x0 : 0000000000000000 [ 710.681251] Call trace: [ 710.683704] usb_remove_hcd+0x34/0x1e4 [ 710.687467] xhci_plat_remove+0x74/0x140 [ 710.691400] platform_remove+0x34/0x70 [ 710.695165] device_remove+0x54/0x90 [ 710.698753] device_release_driver_internal+0x200/0x270 [ 710.703992] device_release_driver+0x24/0x30 [ 710.708273] bus_remove_device+0xe0/0x16c [ 710.712293] device_del+0x178/0x390 [ 710.715797] platform_device_del.part.0+0x24/0x90 [ 710.720514] platform_device_unregister+0x30/0x50 [ 710.725232] dwc3_host_exit+0x20/0x30 [ 710.728907] dwc3_remove+0x174/0x1b0 [ 710.732494] platform_remove+0x34/0x70 [ 710.736254] device_remove+0x54/0x90 [ 710.739840] device_release_driver_internal+0x200/0x270 [ 710.745078] device_release_driver+0x24/0x30 [ 710.749359] bus_remove_device+0xe0/0x16c [ 710.753380] device_del+0x178/0x390 [ 710.756881] platform_device_del.part ---truncated---

In the Linux kernel, the following vulnerability has been resolved: greybus: lights: check return of get_channel_from_mode If channel for the given node is not found we return null from get_channel_from_mode. Make sure we validate the return pointer before using it in two of the missing places. This was originally reported in [0]: Found by Linux Verification Center (linuxtesting.org) with SVACE. [0] https://lore.kernel.org/all/20240301190425.120605-1-m.lobanov@rosalinux.ru

In the Linux kernel, the following vulnerability has been resolved: devlink: rate: Unset parent pointer in devl_rate_nodes_destroy The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: <TASK> devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: prevent NULL deref in iova_to_phys The riscv_iommu_pte_fetch() function returns either NULL for unmapped/never-mapped iova, or a valid leaf pte pointer that requires no further validation. riscv_iommu_iova_to_phys() failed to handle NULL returns. Prevent null pointer dereference in riscv_iommu_iova_to_phys(), and remove the pte validation.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: add null check [WHY] Prevents null pointer dereferences to enhance function robustness [HOW] Adds early null check and return false if invalid.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix system hang while resume with TBT monitor [Why] Connected with a Thunderbolt monitor and do the suspend and the system may hang while resume. The TBT monitor HPD will be triggered during the resume procedure and call the drm_client_modeset_probe() while struct drm_connector connector->dev->master is NULL. It will mess up the pipe topology after resume. [How] Skip the TBT monitor HPD during the resume procedure because we currently will probe the connectors after resume by default. (cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85)

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Validate hdwq pointers before dereferencing in reset/errata paths When the HBA is undergoing a reset or is handling an errata event, NULL ptr dereference crashes may occur in routines such as lpfc_sli_flush_io_rings(), lpfc_dev_loss_tmo_callbk(), or lpfc_abort_handler(). Add NULL ptr checks before dereferencing hdwq pointers that may have been freed due to operations colliding with a reset or errata event handler.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Destroy KFD debugfs after destroy KFD wq Since KFD proc content was moved to kernel debugfs, we can't destroy KFD debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line debugfs_remove_recursive(entry->proc_dentry); tries to remove /sys/kernel/debug/kfd/proc/<pid> while /sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel NULL pointer. (cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233)

In the Linux kernel, the following vulnerability has been resolved: media: venus: protect against spurious interrupts during probe Make sure the interrupt handler is initialized before the interrupt is registered. If the IRQ is registered before hfi_create(), it's possible that an interrupt fires before the handler setup is complete, leading to a NULL dereference. This error condition has been observed during system boot on Rb3Gen2.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset The drm_atomic_get_new_connector_state() can return NULL if the connector is not part of the atomic state. Add a check to prevent a NULL pointer dereference. This follows the same pattern used in dpu_encoder_update_topology() within the same file, which checks for NULL before using conn_state. Patchwork: https://patchwork.freedesktop.org/patch/665188/

In the Linux kernel, the following vulnerability has been resolved: Input: adp5589-keys - fix NULL pointer dereference We register a devm action to call adp5589_clear_config() and then pass the i2c client as argument so that we can call i2c_get_clientdata() in order to get our device object. However, i2c_set_clientdata() is only being set at the end of the probe function which means that we'll get a NULL pointer dereference in case the probe function fails early.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: ufs-qcom: Fix ESI null pointer dereference ESI/MSI is a performance optimization feature that provides dedicated interrupts per MCQ hardware queue. This is optional feature and UFS MCQ should work with and without ESI feature. Commit e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse") brings a regression in ESI (Enhanced System Interrupt) configuration that causes a null pointer dereference when Platform MSI allocation fails. The issue occurs in when platform_device_msi_init_and_alloc_irqs() in ufs_qcom_config_esi() fails (returns -EINVAL) but the current code uses __free() macro for automatic cleanup free MSI resources that were never successfully allocated. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 (P) platform_device_msi_free_irqs_all+0x1c/0x40 ufs_qcom_config_esi+0x1d0/0x220 [ufs_qcom] ufshcd_config_mcq+0x28/0x104 ufshcd_init+0xa3c/0xf40 ufshcd_pltfrm_init+0x504/0x7d4 ufs_qcom_probe+0x20/0x58 [ufs_qcom] Fix by restructuring the ESI configuration to try MSI allocation first, before any other resource allocation and instead use explicit cleanup instead of __free() macro to avoid cleanup of unallocated resources. Tested on SM8750 platform with MCQ enabled, both with and without Platform ESI support.

In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix null-ptr-deref in bitmap_parselist() A crash was observed with the following output: BUG: kernel NULL pointer dereference, address: 0000000000000010 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 92 Comm: osnoise_cpus Not tainted 6.17.0-rc4-00201-gd69eb204c255 #138 PREEMPT(voluntary) RIP: 0010:bitmap_parselist+0x53/0x3e0 Call Trace: <TASK> osnoise_cpus_write+0x7a/0x190 vfs_write+0xf8/0x410 ? do_sys_openat2+0x88/0xd0 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This issue can be reproduced by below code: fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY); write(fd, "0-2", 0); When user pass 'count=0' to osnoise_cpus_write(), kmalloc() will return ZERO_SIZE_PTR (16) and cpulist_parse() treat it as a normal value, which trigger the null pointer dereference. Add check for the parameter 'count'.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Clear the scratch_pt pointer on error Avoid triggering a dereference of an error pointer on cleanup in xe_vm_free_scratch() by clearing any scratch_pt error pointer. (cherry picked from commit 358ee50ab565f3c8ea32480e9d03127a81ba32f8)

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndev In the TX completion packet stage of TI SoCs with CPSW2G instance, which has single external ethernet port, ndev is accessed without being initialized if no TX packets have been processed. It results into null pointer dereference, causing kernel to crash. Fix this by having a check on the number of TX packets which have been processed.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: Fix incorrect retrival of acp_chip_info Use dev_get_drvdata(dev->parent) instead of dev_get_platdata(dev) to correctly obtain acp_chip_info members in the acp I2S driver. Previously, some members were not updated properly due to incorrect data access, which could potentially lead to null pointer dereferences. This issue was missed in the earlier commit ("ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot"), which only addressed set_tdm_slot(). This change ensures that all relevant functions correctly retrieve acp_chip_info, preventing further null pointer dereference issues.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Add error handling for krealloc in metadata setup Function msm_ioctl_gem_info_set_metadata() now checks for krealloc failure and returns -ENOMEM, avoiding potential NULL pointer dereference. Explicitly avoids __GFP_NOFAIL due to deadlock risks and allocation constraints. Patchwork: https://patchwork.freedesktop.org/patch/661235/

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid a NULL pointer dereference [WHY] Although unlikely drm_atomic_get_new_connector_state() or drm_atomic_get_old_connector_state() can return NULL. [HOW] Check returns before dereference. (cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check in mod_hdcp_hdcp1_create_session() The function mod_hdcp_hdcp1_create_session() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference. Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. This is similar to the commit c3e9826a2202 ("drm/amd/display: Add null pointer check for get_first_active_display()"). (cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)

In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Fix SCCB present check Tracing code called by the SCLP interrupt handler contains early exits if the SCCB address associated with an interrupt is NULL. This check is performed after physical to virtual address translation. If the kernel identity mapping does not start at address zero, the resulting virtual address is never zero, so that the NULL checks won't work. Subsequently this may result in incorrect accesses to the first page of the identity mapping. Fix this by introducing a function that handles the NULL case before address translation.

In the Linux kernel, the following vulnerability has been resolved: drm/hisilicon/hibmc: fix the hibmc loaded failed bug When hibmc loaded failed, the driver use hibmc_unload to free the resource, but the mutexes in mode.config are not init, which will access an NULL pointer. Just change goto statement to return, because hibnc_hw_init() doesn't need to free anything.

In the Linux kernel, the following vulnerability has been resolved: of_numa: fix uninitialized memory nodes causing kernel panic When there are memory-only nodes (nodes without CPUs), these nodes are not properly initialized, causing kernel panic during boot. of_numa_init of_numa_parse_cpu_nodes node_set(nid, numa_nodes_parsed); of_numa_parse_memory_nodes In of_numa_parse_cpu_nodes, numa_nodes_parsed gets updated only for nodes containing CPUs. Memory-only nodes should have been updated in of_numa_parse_memory_nodes, but they weren't. Subsequently, when free_area_init() attempts to access NODE_DATA() for these uninitialized memory nodes, the kernel panics due to NULL pointer dereference. This can be reproduced on ARM64 QEMU with 1 CPU and 2 memory nodes: qemu-system-aarch64 \ -cpu host -nographic \ -m 4G -smp 1 \ -machine virt,accel=kvm,gic-version=3,iommu=smmuv3 \ -object memory-backend-ram,size=2G,id=mem0 \ -object memory-backend-ram,size=2G,id=mem1 \ -numa node,nodeid=0,memdev=mem0 \ -numa node,nodeid=1,memdev=mem1 \ -kernel $IMAGE \ -hda $DISK \ -append "console=ttyAMA0 root=/dev/vda rw earlycon" [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010] [ 0.000000] Linux version 6.17.0-rc1-00001-gabb4b3daf18c-dirty (yintirui@local) (gcc (GCC) 12.3.1, GNU ld (GNU Binutils) 2.41) #52 SMP PREEMPT Mon Aug 18 09:49:40 CST 2025 [ 0.000000] KASLR enabled [ 0.000000] random: crng init done [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] efi: UEFI not found. [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] NODE_DATA(0) allocated [mem 0xbfffd9c0-0xbfffffff] [ 0.000000] node 1 must be removed before remove section 23 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] node 1: [mem 0x00000000c0000000-0x000000013fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 0.000000] Mem abort info: [ 0.000000] ESR = 0x0000000096000004 [ 0.000000] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] FSC = 0x04: level 0 translation fault [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 0.000000] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.000000] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.000000] [00000000000000a0] user address but active_mm is swapper [ 0.000000] Internal error: Oops: 0000000096000004 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc1-00001-g760c6dabf762-dirty #54 PREEMPT [ 0.000000] Hardware name: linux,dummy-virt (DT) [ 0.000000] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.000000] pc : free_area_init+0x50c/0xf9c [ 0.000000] lr : free_area_init+0x5c0/0xf9c [ 0.000000] sp : ffffa02ca0f33c00 [ 0.000000] x29: ffffa02ca0f33cb0 x28: 0000000000000000 x27: 0000000000000000 [ 0.000000] x26: 4ec4ec4ec4ec4ec5 x25: 00000000000c0000 x24: 00000000000c0000 [ 0.000000] x23: 0000000000040000 x22: 0000000000000000 x21: ffffa02ca0f3b368 [ 0.000000] x20: ffffa02ca14c7b98 x19: 0000000000000000 x18: 0000000000000002 [ 0.000000] x17: 000000000000cacc x16: 0000000000000001 x15: 0000000000000001 [ 0.000000] x14: 0000000080000000 x13: 0000000000000018 x12: 0000000000000002 [ 0.0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored

In the Linux kernel, the following vulnerability has been resolved: igb: Fix NULL pointer dereference in ethtool loopback test The igb driver currently causes a NULL pointer dereference when executing the ethtool loopback test. This occurs because there is no associated q_vector for the test ring when it is set up, as interrupts are typically not added to the test rings. Since commit 5ef44b3cb43b removed the napi_id assignment in __xdp_rxq_info_reg(), there is no longer a need to pass a napi_id to it. Therefore, simply use 0 as the last parameter.

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: don't restore null sk_state_change queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn't established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn't set and sock->sk->sk_state_change isn't replaced. As such we don't need to restore sock->sk->sk_state_change if queue->state_change is NULL. This avoids NULL pointer dereferences such as this: [ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm-lpass-dais: Fix NULL pointer dereference if source graph failed If earlier opening of source graph fails (e.g. ADSP rejects due to incorrect audioreach topology), the graph is closed and "dai_data->graph[dai->id]" is assigned NULL. Preparing the DAI for sink graph continues though and next call to q6apm_lpass_dai_prepare() receives dai_data->graph[dai->id]=NULL leading to NULL pointer exception: qcom-apm gprsvc:service:2:1: Error (1) Processing 0x01001002 cmd qcom-apm gprsvc:service:2:1: DSP returned error[1001002] 1 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: fail to start APM port 78 q6apm-lpass-dais 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at snd_soc_pcm_dai_prepare on TX_CODEC_DMA_TX_3: -22 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 ... Call trace: q6apm_graph_media_format_pcm+0x48/0x120 (P) q6apm_lpass_dai_prepare+0x110/0x1b4 snd_soc_pcm_dai_prepare+0x74/0x108 __soc_pcm_prepare+0x44/0x160 dpcm_be_dai_prepare+0x124/0x1c0

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid accessing uninitialized arvif->ar during beacon miss During beacon miss handling, ath12k driver iterates over active virtual interfaces (vifs) and attempts to access the radio object (ar) via arvif->deflink->ar. However, after commit aa80f12f3bed ("wifi: ath12k: defer vdev creation for MLO"), arvif is linked to a radio only after vdev creation, typically when a channel is assigned or a scan is requested. For P2P capable devices, a default P2P interface is created by wpa_supplicant along with regular station interfaces, these serve as dummy interfaces for P2P-capable stations, lack an associated netdev and initiate frequent scans to discover neighbor p2p devices. When a scan is initiated on such P2P vifs, driver selects destination radio (ar) based on scan frequency, creates a scan vdev, and attaches arvif to the radio. Once the scan completes or is aborted, the scan vdev is deleted, detaching arvif from the radio and leaving arvif->ar uninitialized. While handling beacon miss for station interfaces, P2P interface is also encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter() tries to dereference the uninitialized arvif->deflink->ar. Fix this by verifying that vdev is created for the arvif before accessing its ar during beacon miss handling and similar vif iterator callbacks. ========================================================================== wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full) RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k] Call Trace: __iterate_interfaces+0x11a/0x410 [mac80211] ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211] ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k] ath12k_roam_event+0x393/0x560 [ath12k] ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k] ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k] ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k] ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k] ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k] ath12k_pci_ce_workqueue+0x69/0x120 [ath12k] process_one_work+0xe3a/0x1430 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: backlight: pm8941: Add NULL check in wled_configure() devm_kasprintf() returns NULL when memory allocation fails. Currently, wled_configure() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload() Add a NULL check for msta->vif before accessing its members to prevent a kernel panic in AP mode deployment. This also fix the issue reported in [1]. The crash occurs when this function is triggered before the station is fully initialized. The call trace shows a page fault at mt7925_sta_set_decap_offload() due to accessing resources when msta->vif is NULL. Fix this by adding an early return if msta->vif is NULL and also check wcid.sta is ready. This ensures we only proceed with decap offload configuration when the station's state is properly initialized. [14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0 [14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G [14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE [14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) [14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common] [14739.851985] sp : ffffffc085efb500 [14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158 [14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001 [14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88 [14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000 [14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080 [14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000 [14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0 [14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100 [14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000 [14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8 [14739.926686] Call trace: [14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211] [14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211] [14739.946860] sta_info_move_state+0x1c/0x30 [mac80211] [14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211] [14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211] [14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211] [14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211] [14739.975516] genl_family_rcv_msg_doit+0xdc/0x150 [14739.980158] genl_rcv_msg+0x218/0x298 [14739.983830] netlink_rcv_skb+0x64/0x138 [14739.987670] genl_rcv+0x40/0x60 [14739.990816] netlink_unicast+0x314/0x380 [14739.994742] netlink_sendmsg+0x198/0x3f0 [14739.998664] __sock_sendmsg+0x64/0xc0 [14740.002324] ____sys_sendmsg+0x260/0x298 [14740.006242] ___sys_sendmsg+0xb4/0x110

In the Linux kernel, the following vulnerability has been resolved: HID: apple: validate feature-report field count to prevent NULL pointer dereference A malicious HID device with quirk APPLE_MAGIC_BACKLIGHT can trigger a NULL pointer dereference whilst the power feature-report is toggled and sent to the device in apple_magic_backlight_report_set(). The power feature-report is expected to have two data fields, but if the descriptor declares one field then accessing field[1] and dereferencing it in apple_magic_backlight_report_set() becomes invalid since field[1] will be NULL. An example of a minimal descriptor which can cause the crash is something like the following where the report with ID 3 (power report) only references a single 1-byte field. When hid core parses the descriptor it will encounter the final feature tag, allocate a hid_report (all members of field[] will be zeroed out), create field structure and populate it, increasing the maxfield to 1. The subsequent field[1] access and dereference causes the crash. Usage Page (Vendor Defined 0xFF00) Usage (0x0F) Collection (Application) Report ID (1) Usage (0x01) Logical Minimum (0) Logical Maximum (255) Report Size (8) Report Count (1) Feature (Data,Var,Abs) Usage (0x02) Logical Maximum (32767) Report Size (16) Report Count (1) Feature (Data,Var,Abs) Report ID (3) Usage (0x03) Logical Minimum (0) Logical Maximum (1) Report Size (8) Report Count (1) Feature (Data,Var,Abs) End Collection Here we see the KASAN splat when the kernel dereferences the NULL pointer and crashes: [ 15.164723] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN NOPTI [ 15.165691] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 15.165691] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0 #31 PREEMPT(voluntary) [ 15.165691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 15.165691] RIP: 0010:apple_magic_backlight_report_set+0xbf/0x210 [ 15.165691] Call Trace: [ 15.165691] <TASK> [ 15.165691] apple_probe+0x571/0xa20 [ 15.165691] hid_device_probe+0x2e2/0x6f0 [ 15.165691] really_probe+0x1ca/0x5c0 [ 15.165691] __driver_probe_device+0x24f/0x310 [ 15.165691] driver_probe_device+0x4a/0xd0 [ 15.165691] __device_attach_driver+0x169/0x220 [ 15.165691] bus_for_each_drv+0x118/0x1b0 [ 15.165691] __device_attach+0x1d5/0x380 [ 15.165691] device_initial_probe+0x12/0x20 [ 15.165691] bus_probe_device+0x13d/0x180 [ 15.165691] device_add+0xd87/0x1510 [...] To fix this issue we should validate the number of fields that the backlight and power reports have and if they do not have the required number of fields then bail.